SHARE Knowledge Hub
NEBOSH Level 6 National Diploma
Develop the judgement to advise an organisation on professional practice, occupational health and workplace safety, then test whether the changes worked.
Understanding NEBOSH Level 6 National Diploma
Develop the judgement to advise an organisation on professional practice, occupational health and workplace safety, then test whether the changes worked.
Why this matters at work
Active monitoring checks whether controls and arrangements work before harm occurs. Examples include representative task observation, workplace inspection, maintenance and test records, exposure monitoring, competence checks and emergency exercises. Choose the method to test the significant risk and a defined performance standard, rather than simply count visits or completed forms. Reactive monitoring learns from injuries, ill health, near misses, dangerous occurrences, releases, equipment damage, complaints and other control failures. Record credible potential severity alongside actual outcome. A dropped load can reveal a fatal risk even without injury, while repeated minor skin complaints can reveal chronic exposure. Combine both kinds of information in management review: a low injury count does not prove that guards, extraction or emergency systems remain effective. Define owners, review and escalation arrangements, check data quality and use findings to correct controls. The important output is a verified improvement in work, supported by enough evidence to understand both what was checked and what may still be unknown.
Repeated successful exposure can make a hazard feel normal even when its physical consequence has not changed. Experience is valuable, but uneventful work can coexist with weak barriers, luck or unreported near misses. Compare actual work with objective control standards and ask what would prevent harm if the next error or defect occurs. Do not treat confidence, willingness or years of service as a substitute for evidence that the present method is safe. Use direct observation, worker discussion and independent challenge to identify workarounds and missed cues. Explain the harm pathway and required controls in a way relevant to the task, and provide usable equipment, time and supervision. Review decisions separately from outcomes: a risky shortcut that succeeds is still a weak decision, while an adverse event does not prove every earlier judgement was unreasonable. Record changes and feedback rather than labelling people complacent. HSE's human-factors approach considers job, individual and organisational conditions together, including how management choices shape behaviour.
How organisations manage this in practice
A fatigue management system governs work decisions across planning, operation and review. It must connect risk assessment with sufficient capacity, workable schedules, reporting and action when someone cannot continue safely. Awareness training is useful within that system but cannot create relief staff or recovery time. Assurance should follow the response to a report and the resulting change in exposure. Connect the assessment to decisions about staffing, schedules, overtime, task timing and escalation. Define who can stop work, obtain relief and approve exceptional arrangements. Use actual hours and worker feedback to test whether rest and break plans are achievable. Train supervisors in the response they must make, not simply the symptoms to recognise. Track repeated exceptions and unresolved resource gaps through management review. The system should demonstrate effective work controls; a poster or completed training module is only one supporting element.
Identify the substance or process-generated hazard, form, route, people exposed and conditions of use, including cleaning, maintenance and foreseeable failures. The SDS contributes hazard information but is not itself the assessment. Prevent exposure where reasonably practicable through elimination or substitution, then select effective source and engineering controls with suitable work methods. Consider nearby people and contact or ingestion routes as well as the operator’s breathing zone. Use PPE and RPE for residual exposure, selected for the task and person, with training, maintenance and fit requirements where applicable. Verify the whole control strategy through appropriate checks and evidence rather than assuming equipment presence means adequate protection. Record significant findings, owners, instructions and stop conditions and review after relevant change or concern. GB COSHH and NI COSHH are separate instruments. Carcinogens, sensitisers and other specific hazards may require additional conditions; this answer does not replace task-specific competent assessment.
Confirm the load, attachment, ground and route with competent people. Check the operation is properly planned, supervised and carried out safely. Check equipment suitability and examination status, visibility and the exclusion area. Coordinate other vehicle movements. Pause if ground or load conditions change and require the plan to be rechecked before continuing.
Who is the National Diploma for?
This qualification suits a practising or aspiring occupational health and safety adviser who wants to influence senior decisions, evaluate evidence and advise across professional practice, occupational health and workplace safety. Allow for substantial reading, analysis and workplace access.
- Units
- DN1, DN2 and DN3
- Framework
- RQF 6 · Ofqual regulated
- Learning time
- 191 taught + 144 private-study hours
- Assessment effort
- About 80 hours across the three units
- Practical access
- A suitable organisation for DN1 activities
Learning hours are planning figures. Assessment effort and submission windows are different. Confirm your Learning Partner’s timetable.
The May 2023 National Diploma is Ofqual-regulated at RQF Level 6, qualification number 610/2228/7. The qualification page and learner guide give 43 credits. The current national unit codes are DN1, DN2 and DN3. ND1, ND2 and ND3 refer to the earlier 2020 specification.
What you can do with it
A depot changing its night shifts might face both fatigue and traffic risks. A Diploma learner can investigate the evidence, involve drivers, challenge assumptions in the business case and give the board a recommendation with a named owner and a way to check the outcome.
How do you turn qualification knowledge into workplace competence?
You build competence by applying what you learn to real tasks under suitable supervision and checking the results. Passing a NEBOSH qualification shows that you have met its assessment requirements. Workplace competence also takes practical skills, relevant experience and behaviours such as listening to workers, speaking up about risk and checking that a change protects people. Practise with an experienced colleague, ask for feedback and seek specialist help when a decision goes beyond your experience.
At the depot, listen to night-shift drivers before advising the board about the change in hours. Separate what you observed from what still needs investigation. Ask an occupational hygienist to assess possible exhaust exposure, then check the results and the revised traffic arrangements with the people doing the work.
Use this advanced learning to analyse risk, advise leaders and evaluate management arrangements. Build role-specific experience, technical skills, sound judgement and continuing development alongside it. Specialist engineering, medical and legal decisions still require the relevant expertise and authority.
What are the entry requirements?
There is no formal prerequisite. NEBOSH recommends the National General Certificate or equivalent Level 3 or 4 learning and English equivalent to IELTS 7.0 or above. DN1 needs access to a suitable workplace. You can arrange access elsewhere with permission if your own organisation cannot provide it.
Choosing a study route
Accredited Learning Partners offer full-time block study, part-time day release and supported distance or eLearning. Plan for around 415 hours overall, including 191 taught hours, 144 hours of private study and 80 hours on assessments. If studying alongside work, agree release for DN1 evidence collection and the submission weeks before booking.
Taught block
Useful when you can step away from normal work for concentrated learning. Protect time for preparation, private study and assessment outside classroom sessions.
Day release or evening study
Useful when you want to apply a topic between sessions. Agree reliable release time and avoid allowing routine work to displace every study period.
Supported online or distance learning
Useful for location or shift flexibility. Check tutor response times, access duration, live sessions, practice feedback and the technology needed.
Blended learning
Useful when you want independent study alongside scheduled discussion. Check which sessions are compulsory and how the provider supports workplace activities.
How is the National Diploma assessed?
There are three assessed units. Plan access to a suitable organisation for DN1 and use the scenarios supplied for DN2 and DN3.
DN1 · Professional practice assignment
Submit both papers at the same sitting. The first uses simulated situations. The second includes workplace activities, reflection and research. Plan roughly 40 hours across a 20-working-day window. Obtain access and permission early so you can collect genuine evidence and protect confidential information.
DN2 · Occupational health case study
Analyse a supplied scenario and advise on exposures, controls and evidence of effectiveness. You might need to distinguish work patterns from medical evidence or explain when a competent hygienist should measure exposure. Allow about 20 hours within ten working days.
DN3 · Workplace safety case study
Use the supplied scenario to analyse how a physical hazard could cause harm, evaluate safeguards and recommend action. Allow about 20 hours within ten working days. NEBOSH requires a closing interview after each unit assessment.
Passing and grading
All three units must pass individually. The provisional unit pass mark is 50%. Add the three passing percentages for the final award. Totals of 150–195 give a pass, 196–225 a credit and 226 or more a distinction. Results are normally due 50 working days after each submission. Check your own five-year enrolment period with the Learning Partner.
How can you prepare for each stage of the assessment?
Start with the instructions for your registered unit, then practise connecting evidence to a reasoned decision. The steps below explain an approach to preparation and common mistakes to recognise.
Plan evidence access and assessment time
Arrange an organisation suitable for DN1 and agree permissions, confidentiality and protected study time. Confirm the actual tasks and submission dates for each sitting.
Common mistake Booking assessment before checking that the necessary workplace evidence can be obtained.
Build a reasoned DN1 argument
Connect evidence to organisational decisions, weigh alternatives and explain limitations. Keep reflection specific to your actions, learning and future practice. Submit both DN1 papers as instructed.
Common mistake Producing a long policy description that never evaluates how arrangements work.
Separate exposure evidence from medical judgement in DN2
Analyse the supplied health scenario, evaluate controls and explain where hygiene measurement or occupational health expertise is needed. Handle uncertainty explicitly.
Common mistake Diagnosing an individual from a scenario or treating an exposure limit as a guarantee of safety.
Evaluate safeguards in DN3
Trace how harm could occur, assess the reliability of safeguards and explain proportionate improvements. Consider maintenance, foreseeable abnormal work and organisational causes.
Common mistake Recommending new equipment without addressing design suitability, maintenance or the people who will use it.
Check evidence, attribution and your reasoning
Use your own analysis, follow the assessment instructions for sources and submission, and attend each closing interview. Keep an organised record of the reasoning behind your conclusions.
Common mistake Confusing the quantity of references with the quality of analysis or making conclusions the evidence cannot support.
Which elements and assessment criteria does the National Diploma cover?
The Diploma has 11 learning outcomes and 58 numbered assessment criteria across DN1, DN2 and DN3.
DN1 covers learning outcomes 1 to 9, DN2 covers outcome 10 and DN3 covers outcome 11. The numbers below are the 58 assessment criteria in the May 2023 specification. Open a learning outcome to see what each criterion asks you to apply.
Read the official NEBOSH syllabus
Learning outcome 1 · Finding, interpreting and communicating duties
Start with the activity, who controls it and the UK territory. Read the current legislation, including definitions, exceptions and commencement. Check the status of any Approved Code of Practice and regulator guidance separately. Explain the decision in terms the supervisor can observe on shift. Record the authority, date and assumptions. Seek competent local advice where a territorial provision or enforcement notice changes the decision.
Workplace example
A company wants one legal briefing for depots in Scotland and Northern Ireland. Identify the instruments, territorial extent and commencement for the activity. Give each depot a dated decision and refer disputed interpretation to a competent legal adviser.
Assessment criterion 1.1 · DN1
1.1 · How regulations take effect
Identify the enabling law, the instrument made under it, the extent and its commencement provisions. Separate consultation proposals from enacted changes, and check whether transitional arrangements cover the activity. Give operations a dated summary of what applies now, what will change, who owns the change and how completion will be checked.
Practise applying it. Which legal instrument is in force at this location on the relevant date?
Related reading · UK Legal Framework
Assessment criterion 1.2 · DN1
1.2 · Criminal proceedings
Identify the jurisdiction, alleged offence, responsible regulator and prosecuting authority. Preserve records and obtain qualified legal advice promptly. Court names, prosecution and appeal routes vary across the UK. Use the route relevant to the actual proceedings when briefing the board. Keep improving site controls while the case is considered and avoid speculating about the outcome.
Practise applying it. What would distinguish an investigation from a decision to prosecute?
Related reading · Prosecutions and Criminal Court Routes
Assessment criterion 1.3 · DN1
1.3 · Enforcement and notices
Read the notice, identify the activity and people affected, make the area safe and communicate the restriction across shifts. Preserve the original and record the recipient, duties, dates and actions. Obtain competent legal or technical advice on the notice, any challenge and evidence needed for compliance. Check the actual legal effect before authorising further work.
Practise applying it. What does a notice require, by when and who will act?
Related reading · Enforcement powers, notices and regulator action
Assessment criterion 1.4 · DN1
1.4 · Civil claims and negligence
Build a factual chronology of the duty, condition of the workplace, previous knowledge, steps taken and injury alleged. Separate evidence about foreseeability from evidence linking a particular breach to the harm. Preserve records and notify the appropriate insurer or legal adviser. A practitioner can explain the work and safeguards while a court ultimately determines liability.
Practise applying it. Which evidence might establish duty, breach, causation and loss?
Related reading · What are civil law liability, negligence and damages?
Assessment criterion 1.5 · DN1
1.5 · Damages and well-intentioned action
In England and Wales the Social Action, Responsibility and Heroism Act 2015 requires a court to consider specified circumstances when determining certain negligence or breach-of-statutory-duty claims. Helping someone is relevant context and does not settle liability. Record the urgency, information available and actions taken. Ask a legal adviser about causation, losses and the applicable pre-action procedure.
Practise applying it. What affects the remedy sought after an injury?
Related reading · Defences, compensation and SARHA in workplace claims
Assessment criterion 1.6 · DN1
1.6 · Occupiers’ liability
Identify who has control of each part of the premises and who may enter it, including delivery staff and children where foreseeable. Check the territorial law and what precautions are reasonable for that visitor and hazard. Agree responsibility for barriers, lighting and communication across the landlord and occupiers. Revisit the arrangement after any layout change.
Practise applying it. Who controls a hazard affecting visitors or trespassers?
Related reading · Occupiers' Liability for Workplaces and Visitors
Assessment criterion 1.7 · DN1
1.7 · Equality and protection for safety roles
Describe the real task and assess its demands and the individual circumstances. Explore adjustments with the worker, seek appropriate advice and record the evidence behind any restriction. Blanket assumptions can exclude capable people. Protect people who raise safety concerns or exercise applicable safety rights from detrimental treatment. Check employment and equality law for the territory.
Practise applying it. How would you identify statutory protections and reasonable adjustments in this case?
Related reading · Lawful Discrimination, Equality and Protection for Safety Roles
Assessment criterion 1.8 · DN1
1.8 · How insurers influence practice
Establish whether the recommendation is a condition of cover, a risk improvement or an observation. Agree the required evidence, deadline and what happens if operations change. Review the hazard and legal duties independently. A policy does not transfer the employer’s duty to control risk. Document actions for both the insurer and the managers who operate the safeguards.
Practise applying it. How might an insurer’s condition affect a proposed control?
Related reading · Insurers and Organisational Health and Safety
Learning outcome 2 · Leadership, culture and worker participation
Compare incident logs with anonymous worker feedback, maintenance requests, shift diaries and observation. Ask workers what happens after they raise a problem and what production targets reward. A low report count alone is ambiguous. Change a decision managers control, invite representatives to test the new reporting route and track feedback time and repeated issues across shifts.
Workplace example
A board dashboard shows fewer reports immediately after supervisors gain a bonus tied to incident numbers. Compare worker interviews and independent observations with the figures. Ask whether the incentive has changed reporting or the actual controls.
Assessment criterion 2.1 · DN1
2.1 · Structures and ownership of risk
Map who controls the budget, task, people, equipment and handover. Interview staff to see how decisions are actually made. Agree a named owner with authority, clear support responsibilities and a route to resolve conflict. Test the arrangement on a real shift and check whether delays or conflicting instructions persist.
Practise applying it. Where could responsibility fall between operations and maintenance?
Related reading · Organisations as Systems and Organisational Structures
Assessment criterion 2.2 · DN1
2.2 · Leadership under pressure
Listen to the operators, check the critical safeguard and make an explicit decision about production while the issue is unresolved. Assign resources for the fix and explain the reasons to all shifts. Follow up in person. A useful measure is whether workers can identify decisions management changed after receiving their evidence.
Practise applying it. What does a leader’s decision during a production delay signal to workers?
Related reading · Health and Safety Leadership and Influence
Assessment criterion 2.3 · DN1
2.3 · Consultation and worker representation
Involve workers or their representatives while several options remain open. Provide relevant information, time and accessible ways to respond, including for night staff and contractors as appropriate. Record what changed, what was declined and why. Ask affected workers whether the final arrangements are practical after implementation.
Practise applying it. Which groups are missing from consultation on a new shift pattern?
Related reading · Safety Representatives and Worker Consultation
See it in practice Financial services · Assess organisational causes of stress
Assessment criterion 2.4 · DN1
2.4 · Culture and behavioural programmes
Start with the problem and incentives the programme may create. Look for process faults such as inaccessible tools, conflicting targets and missing maintenance. Compare observations with private workforce feedback and actual improvements. If the scheme mostly counts worker errors, redesign it to surface management decisions and remove the underlying barriers.
Practise applying it. Which evidence would challenge a claim that a behaviour campaign improved safety?
Related reading · Behavioural change in health and safety
Assessment criterion 2.5 · DN1
2.5 · Learning from successful work
Invite the team to explain how it detected variation, coordinated handovers and recovered safely under pressure. Compare the account with procedures and other shifts. Identify which adaptations preserve protection and which hide a failing control. Agree an improvement, test it under supervision and share what the team learns with the people designing the work.
Practise applying it. What adjustments do experienced staff make that keep the job safe?
Related reading · Traditional and Proactive Safety Management Models
Assessment criterion 2.6 · DN1
2.6 · Risk perception
Familiarity, control, previous outcomes and exposure to information can influence judgement. Ask each person to describe a plausible failure and its consequences, then examine observations and control reliability together. Agree a common decision rule for escalation. Revisit it after a near miss or a change that alters the assumptions.
Practise applying it. Why might a contractor and manager judge the same risk differently?
Related reading · Risk Perception and Decision-Making
Assessment criterion 2.7 · DN1
2.7 · Human reliability
Reconstruct what the person could see, what competing tasks existed, the wording of the instruction and the equipment feedback. Distinguish a lapse, a mistaken judgement and an intentional departure. Each calls for different controls. Test redesigned prompts, access or workflow with users before relying on a reminder or retraining.
Practise applying it. Which parts of the system make error more likely or easier to recover from?
Related reading · Human Failures, Human Factors and Human Reliability
Learning outcome 3 · Individual and organisational competence
Identify foreseeable errors and the judgement needed during abnormal conditions. A competent assessor should observe the worker perform the task, test how they recognise the limits of their authority and record the evidence against agreed criteria. Authorise a defined scope. Arrange supervision for gaps and reassess after equipment changes, prolonged absence or evidence of drift. Check who can deputise on nights.
Workplace example
A technician can describe a procedure but has only used it during normal operation. Arrange a supervised exercise using an abnormal scenario and agree what an assessor must observe before extending authorisation.
Assessment criterion 3.1 · DN1
3.1 · Competence and supervision
List the decisions that must be taken correctly under pressure. Provide a safe simulation or supervised practice, use clear assessment criteria and check retention after time away. Record who is authorised and where assistance is required. Maintain cover across shifts and retest after changes to equipment, staffing or emergency arrangements.
Practise applying it. What standard must the person demonstrate before supervision is reduced?
Related reading · How should competence, training, information and supervision be managed?
See it in practice Higher education · Govern specialist laboratory risks
Assessment criterion 3.2 · DN1
3.2 · High-reliability organisations
Give operators time to report small deviations and access to someone with the right expertise, regardless of grade. Check how teams respond to conflicting instruments and handovers through safe exercises. Look for weak signals and recurring temporary fixes. Demonstrate that management investigates anomalies and closes the loop with those who raised them.
Practise applying it. How does the organisation react to a small signal that a critical control is degrading?
Related reading · High Reliability Organisations and Resilient Performance
Learning outcome 4 · Risk assessment and proportionate control
Describe the credible harm, who is exposed, how often and the evidence that each option will prevent it. Examine the hierarchy of control and foreseeable control failures. Where the duty is qualified by reasonable practicability, consider the risk and sacrifice in the applicable legal test. A risk matrix can help communicate priorities. Record the decision, interim protection, accountable person and evidence that will trigger reconsideration.
Workplace example
A retailer’s highest scored risks come from frequently inspected stores while its distribution depot has sparse data. Compare the exposure, consequence and evidence quality before recommending where senior managers should visit.
Assessment criterion 4.1 · DN1
4.1 · Choosing a hazard identification method
Use a walk-through or task analysis for human interactions and a structured multidisciplinary review for complex process deviations. A checklist is useful for familiar hazards but can miss new interfaces. Choose the method around the decision, competence and available information. Record assumptions, owners and how the design team will verify recommendations before use.
Practise applying it. Which hazard identification method fits the uncertainty in this process?
Related reading · Organisational Risk Profile and Risk Profiling
Assessment criterion 4.2 · DN1
4.2 · Comparing risk assessments
Check whether both assessors considered the same credible event, exposed people and actual safeguards. Compare uncertainty, potential severity and applicable duties. A score is a communication aid. Choose controls that genuinely prevent or mitigate harm, explain the reasoning and verify their performance where the task takes place.
Practise applying it. Why might two assessors reach different conclusions from the same evidence?
Related reading · Sensible Risk Management and Risk Assessment Programmes
See it in practice Local government · Improve public-facing lone work
Assessment criterion 4.3 · DN1
4.3 · Organisational risk profiles
Show each material hazard, possible consequences, exposed groups, key controls, accountable manager and evidence of performance. Explain changes since the last review and where assumptions remain untested. Include low-frequency severe events and long-latency disease alongside frequent injuries. Use the profile to allocate resources and challenge unresolved control failures.
Practise applying it. Which risks deserve senior attention and what evidence supports that priority?
Related reading · Organisational Risk Profile and Risk Profiling
See it in practice Logistics · Test a transport risk strategy
Learning outcome 5 · Monitoring, investigation, audit and review
An audit sample may cover day shifts and signed forms while a high-risk task takes place on nights. Trace a control from written requirement through field observation to maintenance, staff interviews and defect close-out. Report the sample limits. Pair a leading measure of control availability with outcomes and use a later independent check to confirm an improvement stuck.
Workplace example
A contractor’s incident rate falls as overnight work increases. Compare reporting opportunities, hours exposed and independent evidence on that shift before drawing conclusions. Give the board a specific check on a critical control.
Assessment criterion 5.1 · DN1
5.1 · Incident data and causation
Choose a comparable numerator, denominator, time period and case definition. A site with more workers or hours can have a larger raw count even if its rate is lower. Check contractor inclusion, reporting behaviour, exposure mix and uncertainty from small numbers. Use field observations and a causal investigation before attributing a difference to management quality.
Practise applying it. How would you test an apparent downward trend for under-reporting?
Related reading · Loss Causation, Incident Models and Quantitative Data
Assessment criterion 5.2 · DN1
5.2 · Monitoring, audit and review
Combine performance against objectives, control verification, legal change, worker feedback, incidents and overdue actions. Ask whether priorities and resources are still right. Assign named owners and response dates, agree what evidence will demonstrate improvement and sample it at the next review. Record disputed assumptions and changes to the risk profile.
Practise applying it. Which independent observation would challenge an apparently satisfactory audit?
Related reading · Review of Health and Safety Performance
See it in practice Energy · Evaluate safety-critical maintenance
Learning outcome 6 · Professional judgement, ethics and influence
Check the underlying evidence and give the director a chance to correct factual errors. Separate observations, assumptions and conclusions. Explain the foreseeable harm, choices and consequences in plain language. Keep a factual record, handle personal information confidentially and use the appropriate escalation route if exposure continues. Obtain specialist or professional advice where the issue exceeds your competence.
Workplace example
A director requests assurance on a specialist ventilation design before a tender closes. Explain what your evidence supports, identify the specialist judgement still required and record who will make the decision after independent review.
Assessment criterion 6.1 · DN1
6.1 · Ethics, professional judgement and influence
Set out the legal duty, credible harm, options and the reliability of evidence. Show who is exposed and what an interim measure can realistically achieve. Present costs and operational effects without exaggerating savings or injury probabilities. Declare conflicts and involve workers. Recommend an option, owner and review date and invite challenge to the assumptions.
Practise applying it. What should you tell a director when a requested opinion falls outside your competence?
Related reading · Professional Skills, Ethics and Influence for Health and Safety Practitioners
See it in practice Telecommunications · Make an ethical decision under pressure
Learning outcome 7 · Policy, strategy and managing change
Map changes to control owners, staffing, equipment and interfaces before merging operations. Invite representatives from both sites, including contractors, to identify how work actually happens. Assign resources, authority and transition criteria. Sample a high-risk task after handover and review workforce feedback and defects. Use those findings to revise policy and board oversight.
Workplace example
A merger removes the local manager who approved safety-critical repairs. Trace authority and budget in the new structure, assign a decision owner and test how an urgent defect raised on a night shift would be resolved.
Assessment criterion 7.1 · DN1
7.1 · External pressures and strategy
Identify changes to staffing, maintenance, purchasing and contractor dependence. Test whether the proposed savings weaken critical safeguards or place greater demands on vulnerable groups. Brief directors on duties and risk, prioritise essential controls and set indicators that reveal deterioration. Review assumptions when trading conditions or staffing recover.
Practise applying it. Which external pressure could divert resources from a critical control?
Related reading · Societal Factors Influencing Health and Safety Strategy
See it in practice Telecommunications · Make an ethical decision under pressure
Assessment criterion 7.2 · DN1
7.2 · Corporate social responsibility
Ask what the claim covers, including subcontractors and temporary workers. Examine purchasing deadlines, pay incentives, worker voice and evidence from a sample of suppliers. Give suppliers time and support to correct problems, prioritising immediate protection. Report the scope and limitations of assurance, who owns actions and how workers can challenge inaccurate findings.
Practise applying it. How would you check that a public commitment is reflected in supply-chain decisions?
Related reading · How do corporate social responsibility, sustainability and health and safety connect?
Assessment criterion 7.3 · DN1
7.3 · Managing organisational change
Compare the existing and proposed patterns with staff, including travel, caring needs, workload and cover for critical tasks. Assess unintended fatigue and handover risks. Trial the change where appropriate, set stop criteria, and use observations and private feedback to judge the result. Assign an owner who can reverse or modify the trial.
Practise applying it. How will the change owner discover an unintended consequence after implementation?
Related reading · Organisational Change Management and Health and Safety
See it in practice Manufacturing · Challenge an unsafe production change
Learning outcome 8 · Supporting investigations and legal proceedings
First arrange aid and make the area safe. Record changes made for rescue. Preserve original records, equipment information and lawful evidence with dates and access controls. Distinguish observations from conclusions and let witnesses describe events in their own words. Escalate reporting decisions promptly to the responsible person. Take jurisdiction-specific legal advice on disclosure, privilege and requests for evidence.
Workplace example
After a serious event, witness accounts conflict with a time-stamped record. Preserve originals and record provenance, assumptions and uncertainty separately. Seek appropriate professional advice on disclosure and evidence handling.
Assessment criterion 8.1 · DN1
8.1 · Evidence for civil claims
Notify the appropriate claims contact and obtain legal direction on the response and deadlines. Preserve originals, relevant maintenance history, risk assessments and witness details. Record material that challenges as well as supports the organisation’s account. Protect personal information and give factual, traceable explanations of how the work was managed.
Practise applying it. Which records must be preserved after notification of a possible claim?
Related reading · What should you know about documentary evidence for health and safety legal actions?
Assessment criterion 8.2 · DN1
8.2 · Inquests and fatal accident inquiries
Identify the relevant territorial process and its purpose. A fact-finding inquiry into a death and a criminal trial serve different functions. The adviser may need to preserve evidence, describe controls and distinguish personal observations from specialist opinion. Work through the appointed legal contact, respect families and record preventive actions independently of the proceedings.
Practise applying it. Which death investigation process applies in this jurisdiction?
Related reading · How do coroners, inquests and fatal incident legal processes work?
Assessment criterion 8.3 · DN1
8.3 · Evidence for criminal proceedings
Start with the exact legal wording and territory. Establish what was known at the time, the magnitude of the risk, available precautions, relevant standards and decisions about resources. Record implementation as well as the written decision. A competent legal adviser should address the applicable burden and legal test. Preserve inconsistent evidence for a fair account.
Practise applying it. How would you preserve the origin and integrity of evidence for an investigation?
Related reading · Qualified Duties in Statute Law
Assessment criterion 8.4 · DN1
8.4 · Witness evidence and conflicts of interest
Preserve the original account and record any genuine correction transparently. A witness should describe what they personally observed and identify inference or information from others. Avoid coaching or coordinated accounts. Seek independent legal or professional advice about conflicting obligations and use the appropriate escalation route if someone pressures a witness.
Practise applying it. How would a witness distinguish a first-hand observation from an inference?
Related reading · Ethical issues in health and safety legal actions
Learning outcome 9 · Contractors, procurement and supply chains
Confirm the people and equipment arriving match the proposed work, then exchange site hazards, operating boundaries and emergency arrangements. Agree who controls interfaces and changes, particularly when another employer starts work nearby. Sample the task in progress, give workers a route to pause and escalate and verify reinstatement before handback. Feed significant findings into future procurement decisions.
Workplace example
During a shutdown, a subcontractor supplies a different crew from the one assessed at tender. Check competence and task interfaces before work starts, then sample supervision and handback evidence while the job is under way.
Assessment criterion 9.1 · DN1
9.1 · Contractor selection and assurance
Assess evidence specific to the job, including relevant experience, supervisors, specialist resources and planned interfaces. Check references and how subcontractors will be selected and controlled. Examine whether price and timescale allow the proposed safe method. Agree measurable performance and stop-work arrangements, then check on site that the tender commitments are delivered.
Practise applying it. Who verifies a contractor’s competence before appointment and checks performance during the job?
Related reading · How should contractors and supply chains be managed safely?
See it in practice Construction · Assure contractor control across projects
Learning outcome 10 · Advising on occupational health
Listen privately, arrange access to occupational health and take proportionate immediate precautions. Map tasks, materials, routes of exposure, duration, shifts and recent changes. Compare accounts with observations and competent exposure measurements. Group patterns can guide investigation while individual diagnosis belongs with a clinician. Assign an engineering improvement and review both actual exposure and anonymised trends after the change.
Workplace example
At a laundry, workers describe breathing irritation during a short cleaning task that the shift average may conceal. Ask an occupational hygienist to design representative sampling and the occupational health team to advise confidentially. Check the control under actual cleaning conditions.
Assessment criterion 10.1 · DN2
10.1 · Rehabilitation and return to work
With the worker’s agreement, obtain occupational-health advice on functional restrictions, duration and review dates. Walk the actual role together and identify lifting, reaching and driving demands. Agree suitable temporary duties with the line manager. Review the first shifts privately, adjust if the work aggravates symptoms and share only the information needed to implement adjustments.
Practise applying it. Which adjustments and review points would support a sustainable return?
Related reading · Occupational Health, Fitness for Work and Vocational Rehabilitation
Assessment criterion 10.2 · DN2
10.2 · Mental health, fatigue and violence
Ask staff and representatives about workload, support, lone cover and recent confrontations. Compare shift patterns, absence and incident reports while protecting identities. Provide immediate support after violence and address the work design, such as cover at closing and a reliable way to summon help. Ask staff whether the change works on busy nights.
Practise applying it. What change to workload or shift design could reduce the source of harm?
Related reading · Mental ill-health, wellbeing, fatigue and workplace violence · Fatigue Management
See it in practice Local government · Improve public-facing lone work · Financial services · Assess organisational causes of stress · Transport services · Manage fatigue through work design
Assessment criterion 10.3 · DN2
10.3 · Occupational health and confidentiality
Set the surveillance programme around an identified risk and suitable clinical advice. The manager needs the fitness or restriction decision and any changes to the work. Clinical notes remain confidential with the health professional. Review anonymised trends alongside exposure information. Act on a pattern even if no worker has volunteered a diagnosis to their supervisor.
Practise applying it. What work-related advice does a manager need and what stays confidential?
Related reading · What should you know about COSHH control measures and health surveillance?
See it in practice Healthcare · Build an occupational health programme
Assessment criterion 10.4 · DN2
10.4 · Substances and routes of exposure
A pictogram identifies a hazard. The task determines who can inhale, swallow or contact the substance and in what quantity. Compare product form, volatility, duration, handling and exposed skin, including maintenance and spills. Use the safety data and observed work together. Consider short-term effects and long-latency disease when deciding which exposure to prevent first.
Practise applying it. What properties and exposure routes matter for this material?
Related reading · What are chemical classification, REACH, CLP and safety data sheets?
Assessment criterion 10.5 · DN2
10.5 · Assessing hazardous substances at work
A supplier describes a substance or mixture. The employer must assess its own activities, including substances produced by the work, people exposed and the effectiveness of existing controls. Observe routine and infrequent tasks. Consider elimination, substitution and engineering measures, check that controls perform and explain them to operators. Confirm the applicable chemical supply and workplace rules for the territory.
Practise applying it. How would you assess combined tasks or people working nearby?
Related reading · Assessment of health risks from hazardous substances
See it in practice Food manufacture · Reduce respiratory sensitiser exposure
Assessment criterion 10.6 · DN2
10.6 · Epidemiology and toxicology
Check the case definition, number exposed, comparable groups, timing, exposure route and changes in reporting. Examine plausible alternative explanations such as other tasks or different ages. Epidemiological findings and evidence on how a substance affects the body can strengthen or weaken an explanation. Take sensible preventive measures while occupational-health and hygiene specialists investigate uncertainty.
Practise applying it. What could bias an apparent exposure–illness relationship?
Related reading · Epidemiology, occupational health data and causal interpretation
Assessment criterion 10.7 · DN2
10.7 · Asbestos
Stop disturbing the material, prevent access and inform the person managing the premises. Use the asbestos register and check whether the survey covered this exact intrusive work. Arrange competent advice on assessment, containment, clean-up and any reporting required. Confirm the area is safe and that the work plan and information for contractors are updated before authorising return.
Practise applying it. What information would stop intrusive work on a suspect material?
Related reading · Asbestos risk management and compliance
Assessment criterion 10.8 · DN2
10.8 · Ventilation and respiratory protection
A fan can run while the hood is poorly positioned, airflow is obstructed or a draught carries fume through the breathing zone. Stop and report ineffective control. Ask a competent person to check capture under realistic working conditions against commissioning data. Review the process and suitable additional respiratory protection. Include user checks, maintenance, examination and training.
Practise applying it. How would you test whether capture and respiratory protection suit the task?
Related reading · Ventilation, Local Exhaust Ventilation and Workplace Air Control · Face Fit Testing
See it in practice Food manufacture · Reduce respiratory sensitiser exposure
Assessment criterion 10.9 · DN2
10.9 · Occupational hygiene and sampling
Identify who the sample represented, what the worker did, how long it ran and whether peak, night or cleaning tasks were missed. Choose personal monitoring where breathing-zone exposure matters and use an appropriate comparison period. Check other routes of uptake and uncertainty with a competent hygienist. Repeat representative measurements after control changes.
Practise applying it. Who should be sampled, when, and what peaks might be missed?
Related reading · Occupational Exposure Limits and Workplace Exposure Limits
See it in practice Waste processing · Evaluate control of biological exposure
Assessment criterion 10.10 · DN2
10.10 · Biological hazards and accidental exposure
Plan safe collection by trained people with suitable equipment and designated disposal arrangements. Keep others away from the item and record where and when it was found. After an injury, follow the first-aid and urgent occupational-health pathway promptly. Review why the item entered the area and whether collection or disposal arrangements need to change.
Practise applying it. How should a possible occupational exposure be reported and investigated?
Related reading · Sharps Awareness · Hand Hygiene and Infection Prevention
See it in practice Healthcare · Build an occupational health programme · Waste processing · Evaluate control of biological exposure
Assessment criterion 10.11 · DN2
10.11 · Noise and hearing conservation
Observe the jobs and estimate actual time at each noise source. Use competent measurements where required, including peaks. Prioritise quieter methods, enclosure or separation and check effectiveness at workers’ positions. Provide suitable hearing protection and training for remaining exposure, and arrange health surveillance where indicated. Recheck when machines, work patterns or controls change.
Practise applying it. What could reduce noise at source before hearing protection is selected?
Related reading · Noise Risk Assessment and Hearing Conservation
Assessment criterion 10.12 · DN2
10.12 · Hand-arm and whole-body vibration
Observe real use and distinguish time holding a tool from trigger time. Check condition, consumables, grip and whether published data represent the work. For drivers, consider surface, speed, suspension and duration of whole-body vibration. Prioritise eliminating or reducing exposure at source. Ask workers about difficulties and arrange appropriate surveillance or advice.
Practise applying it. What differs between hand-tool exposure and vibration in a vehicle seat?
Related reading · Vibration Risk Assessment and Health Controls · Hand-Arm Vibration Syndrome (HAVS)
Assessment criterion 10.13 · DN2
10.13 · Ionising and non-ionising radiation
Identify the source, exposure route and type of radiation. Industrial radiography requires specialist advice and formal control of exposures and access. Solar ultraviolet exposure calls for shade, scheduling and skin and eye protection appropriate to the work. Assess foreseeable maintenance and abnormal conditions. Refer unfamiliar sources to a competent radiation specialist before work proceeds.
Practise applying it. What specialist input is needed for the radiation source at this workplace?
Related reading · Radiation and Radon · Optical Radiation Effects (UV and Lasers)
See it in practice Higher education · Govern specialist laboratory risks
Assessment criterion 10.14 · DN2
10.14 · Ergonomics and manual handling
Observe the task over a representative period and ask people where strain builds up. Select an assessment tool for the problem, such as ART for repetitive upper-limb tasks, MAC for applicable lifting and carrying, or RAPP for pushing and pulling. Consider duration, reach, recovery, load and individual needs. Trial redesign and check usability on all shifts.
Practise applying it. How would you test a redesign with the people handling the load?
Related reading · Musculoskeletal issues, ergonomics and manual handling
Assessment criterion 10.15 · DN2
10.15 · Thermal environments and welfare
Air temperature alone misses radiant heat, workload, humidity, clothing, acclimatisation and individual circumstances. Reduce heat at source, improve the work environment and provide drinking water, breaks and suitable recovery. Plan for someone becoming unwell. Apply the same task-based reasoning to cold, including wind, wet clothing and warm recovery facilities.
Practise applying it. Which signs would prompt you to change work and recovery arrangements in heat or cold?
Related reading · Thermal Environments, Heat Stress and Cold Stress
Learning outcome 11 · Advising on workplace safety
Identify the hazard, people in reach, possible energy or substance release and the safeguard that prevents exposure. Compare its required function with a safe, competent verification and the defect history. If safe function cannot be established, keep people away and arrange competent isolation and repair. Authorise return only against defined checks, communicate the change to all shifts and monitor recurrence.
Workplace example
A distribution centre changes its racking layout to increase storage. Follow a load from arrival to put-away and examine maintenance access as well as routine driving. Test the separation of people and vehicles when the yard is busiest.
Assessment criterion 11.1 · DN3
11.1 · Safe workplace design
Walk the routes people use during busy, quiet and cleaning periods, including workers with access needs and visitors. Check floors, routes, lighting, ventilation, welfare and separation from moving plant. A taped line gives little protection against a vehicle or a recurring leak. Allocate repairs, temporary protection and a date to verify the change in use.
Practise applying it. Does the workplace layout protect people during maintenance as well as production?
Related reading · Safe Workplace Design, Welfare and Working Environment
Assessment criterion 11.2 · DN3
11.2 · Confined spaces
First establish whether the work can be done from outside. Identify any specified risk and changing conditions, including connected systems and other work. If entry is necessary, require a competent task-specific safe system and suitable rescue arrangements ready before entry. Confirm that people know how to raise the alarm without becoming a second casualty.
Practise applying it. What would establish whether entry can be avoided and rescue is feasible?
Related reading · How should confined spaces risk management be organised?
Assessment criterion 11.3 · DN3
11.3 · Fire and explosion prevention
Follow the material from receipt to use and waste. Identify where a release could occur and who might be exposed. Seek competent assessment of ventilation, equipment suitability and ignition control. Verify maintenance and change control. Where an engineered safeguard is credited, name its required function and the evidence that supports relying on it.
Practise applying it. Which reasonably foreseeable release or ignition source needs a competent assessment?
Related reading · Flammable and Explosive Materials and DSEAR
Assessment criterion 11.4 · DN3
11.4 · Fire precautions and escape
Trace a credible fire from detection through warning, decision, travel and arrival at a safe place. Check whether the alarm is perceptible, routes are usable, staff cover is realistic and assistance is available on every shift. Observe a safe exercise and close out defects. Confirm the premises-specific strategy and applicable national fire law with a competent person.
Practise applying it. What evidence shows escape arrangements work for everyone present?
Related reading · Fire Evacuation Strategies · Fire Alarms and Firefighting
Assessment criterion 11.5 · DN3
11.5 · Dangerous substances, processes and transport
Establish the substance identity, hazards, packaging or transfer requirements and compatibility with existing storage through competent review. Confirm the supplier, carrier and receiving site each understand their responsibilities, handover checks and emergency communication. Hold the change if essential information is missing. Assess any necessary changes to containment, permissions, competence and emergency planning.
Practise applying it. How do the substance’s properties affect storage, movement and emergency arrangements?
Related reading · Dangerous substances, process safety and chemical transport
Assessment criterion 11.6 · DN3
11.6 · Maintenance, inspection and examination
Inspection looks for deterioration or unsafe condition. Maintenance preserves or restores function. Some equipment also needs a defined statutory examination by a competent person. Use the requirements applicable to that asset and follow up its findings. Where a safety-critical function is overdue or defective, restrict use pending a competent decision and verify repair before release.
Practise applying it. Which record shows a safety-critical defect has been resolved and verified?
Related reading · Maintenance, inspection and testing of work equipment and machinery
See it in practice Energy · Evaluate safety-critical maintenance
Assessment criterion 11.7 · DN3
11.7 · Selecting work equipment
Write a specification for the real tasks, users and environment. Assess access for use, cleaning and maintenance, reach, visibility, noise and suitability for intended loads. Involve workers in acceptance. Check documentation and instructions alongside the physical safeguards, then define who may use the equipment and what commissioning evidence the employer retains.
Practise applying it. Does the proposed equipment protect people over its whole working life?
Related reading · Work Equipment General Requirements
Assessment criterion 11.8 · DN3
11.8 · Machinery and stored energy
Production guards may protect normal use while cleaning creates access to moving parts and stored energy. Examine the entire life cycle, including jam clearance and foreseeable intervention. Use competent design and isolation review, a safe method and verification before access. Keep defective machinery out of use and verify guard function under controlled conditions after repair.
Practise applying it. Which stored energies remain when normal machine movement stops?
Related reading · Machinery safety and control systems
See it in practice Manufacturing · Challenge an unsafe production change
Assessment criterion 11.9 · DN3
11.9 · Mobile equipment and lifting
Confirm the load, attachment, ground and route with competent people. Check the operation is properly planned, supervised and carried out safely. Check equipment suitability and examination status, visibility and the exclusion area. Coordinate other vehicle movements. Pause if ground or load conditions change and require the plan to be rechecked before continuing.
Practise applying it. What converts a lifting plan into controls the crew can verify on the day?
Related reading · Mobile work equipment and lift trucks · Load-Handling Equipment and Lifting Operations
Assessment criterion 11.10 · DN3
11.10 · Electricity and static
Prevent further use, isolate safely where authorised and arrange competent inspection. Identify environmental factors such as wet work and damage from traffic. Review protection, selection, inspection and testing according to risk. Where static discharge could ignite a flammable atmosphere, refer the process and equipment to a competent specialist before authorising use.
Practise applying it. Who is competent to verify electrical isolation or static precautions?
Related reading · Electrical control measures, safe systems and inspection · Electricity and static electricity
Assessment criterion 11.11 · DN3
11.11 · Changing construction work
Revisit the design and site information with the appropriate dutyholders. Check effects on stability, underground services, public access, adjacent trades and work at height. Pause the affected activity until the revised controls and sequence are agreed and communicated. Confirm whether the site is in Great Britain or Northern Ireland and use the applicable construction duties.
Practise applying it. How does risk change between design, temporary works and handover?
Related reading · How should construction hazards be controlled? · What are the Construction Design and Management Regulations?
See it in practice Construction · Assure contractor control across projects
Assessment criterion 11.12 · DN3
11.12 · Workplace transport and road risk
At the depot, assess pedestrian separation, crossings, reversing, loading and visitors. For the journey, assess the driver, vehicle and journey together, including time pressure, fatigue and weather. Allocate responsibility for risk at the boundary. Walk the route at a shift change, check near misses and make sure drivers can delay an unsafe journey.
Practise applying it. Can pedestrians, vehicles and visiting drivers move safely during peak demand?
Related reading · Workplace Transport and Work-Related Driving
See it in practice Logistics · Test a transport risk strategy · Transport services · Manage fatigue through work design
How could you use this qualification at work?
An adviser can use the Diploma to investigate an occupational health concern, brief directors on the evidence and test the effect of their decision at the depot.
A fictional depot extends its night shift. Staff report headaches near a loading bay and two people narrowly avoid a reversing lorry. For DN1, the adviser finds that the change approval assigned no one to test the night layout and asks the depot manager to own a review with drivers. For DN2, the adviser arranges immediate precautions and competent assessment of possible exhaust exposure, with confidential occupational-health follow-up. For DN3, the team separates pedestrians from reversing vehicles. It observes the next busy night, reviews measurements and records what must change before the arrangement becomes permanent.
What does this learning look like in different workplaces?
Use these 12 examples to connect a workplace problem with a decision, an accountable role and a check that protection works. Each example links to relevant syllabus references and practical SHAREhub guidance.
These fictional SHAREhub examples show how learning can support real decisions. They are teaching illustrations, with selected issues rather than complete risk assessments or model assessment answers. Apply current guidance and competent judgement to the actual workplace.
12 workplace examples
LogisticsTest a transport risk strategy
What could go wrong?
A multi-depot business has repeated pedestrian near misses but only reports injury rates. Serious collision exposure may remain hidden.
How could you apply the learning?
Compare layouts, operating patterns and critical controls across depots. Propose investment priorities using exposure evidence, worker input and the reliability of separation.
Who checks that it works?
The operations director owns implementation. Track verified separation and defect closure, then review the residual interactions during peak demand.
Study references 4.3 Organisational risk profiles · 11.12 Workplace transport and road risk
Apply it with SHAREhub Organisational Risk Profile and Risk Profiling · Workplace Transport and Work-Related Driving
ManufacturingChallenge an unsafe production change
What could go wrong?
A production increase changes access to machinery and the time available for maintenance. Exposure to moving or stored energy may rise.
How could you apply the learning?
Evaluate the change across engineering, staffing and work organisation. Obtain competent machinery assessment and build validation, training and safe maintenance into the approval.
Who checks that it works?
The change sponsor records acceptance criteria. Verify safeguarding and maintenance access before release and review early operation.
Study references 7.3 Managing organisational change · 11.8 Machinery and stored energy
Apply it with SHAREhub Organisational Change Management and Health and Safety · Machinery safety and control systems
HealthcareBuild an occupational health programme
What could go wrong?
Staff report repeated exposure incidents across departments. Fragmented records hide patterns while confidential clinical information needs protection.
How could you apply the learning?
Work with occupational health and service leads to analyse suitable anonymised data, improve prevention and define referral and response arrangements.
Who checks that it works?
The executive sponsor tracks prevention and response measures. Access to clinical records remains controlled by appropriate professionals.
Study references 10.3 Occupational health and confidentiality · 10.10 Biological hazards and accidental exposure
Apply it with SHAREhub What should you know about COSHH control measures and health surveillance? · Sharps Awareness · Hand Hygiene and Infection Prevention
ConstructionAssure contractor control across projects
What could go wrong?
Several projects use the same contractor but defects recur despite completed audits. Workers remain exposed to falls and unstable work areas.
How could you apply the learning?
Examine procurement, coordination, supervision and action closure. Sample work on site and test whether the audit evidence matches actual controls.
Who checks that it works?
The construction director assigns improvements and rechecks implementation across projects. Report unresolved critical risks to the appropriate decision maker.
Study references 9.1 Contractor selection and assurance · 11.11 Changing construction work
Apply it with SHAREhub How should contractors and supply chains be managed safely? · How should construction hazards be controlled? · What are the Construction Design and Management Regulations?
EnergyEvaluate safety-critical maintenance
What could go wrong?
An energy site defers maintenance on protective equipment to preserve availability. Loss of protection could escalate a process incident.
How could you apply the learning?
Assess how deferrals are justified, authorised and monitored. Seek engineering evidence on the affected barriers, operating restrictions and conditions for continued use.
Who checks that it works?
The asset owner records competent decisions and expiry dates. Assurance checks whether restrictions remain effective until repair.
Study references 5.2 Monitoring, audit and review · 11.6 Maintenance, inspection and examination
Apply it with SHAREhub Review of Health and Safety Performance · Maintenance, inspection and testing of work equipment and machinery
Food manufactureReduce respiratory sensitiser exposure
What could go wrong?
Bakery workers tip dusty ingredients and some report respiratory symptoms. Continued exposure could cause or worsen occupational asthma.
How could you apply the learning?
Evaluate substitution, enclosed transfer and capture at source. Commission competent hygiene assessment and occupational health input appropriate to the exposure and symptoms.
Who checks that it works?
The production lead verifies engineering performance and work practice. Health information is handled confidentially and informs preventive action appropriately.
Study references 10.5 Assessing hazardous substances at work · 10.8 Ventilation and respiratory protection
Apply it with SHAREhub Assessment of health risks from hazardous substances · Ventilation, Local Exhaust Ventilation and Workplace Air Control · Face Fit Testing
Local governmentImprove public-facing lone work
What could go wrong?
Housing officers attend visits with inconsistent information about aggression. A worker may be assaulted without prompt assistance.
How could you apply the learning?
Consult staff and evaluate visit screening, staffing, communication and escalation. Test the response to a missed contact and support after an incident.
Who checks that it works?
The service director checks the arrangements across teams, including out-of-hours work, and reviews incidents and worker feedback.
Study references 10.2 Mental health, fatigue and violence · 4.2 Comparing risk assessments
Apply it with SHAREhub Mental ill-health, wellbeing, fatigue and workplace violence · Fatigue Management · Sensible Risk Management and Risk Assessment Programmes
Higher educationGovern specialist laboratory risks
What could go wrong?
Departments introduce new radiation-related work without a consistent competence review. Inadequate control can expose researchers and support staff.
How could you apply the learning?
Clarify responsibilities and obtain advice from the relevant radiation protection specialists. Review authorisation, equipment, training and control of changes for the actual source and work.
Who checks that it works?
The institution’s accountable lead verifies specialist recommendations and assurance evidence. Diploma knowledge supports governance rather than authorising specialist practice.
Study references 3.1 Competence and supervision · 10.13 Ionising and non-ionising radiation
Apply it with SHAREhub How should competence, training, information and supervision be managed? · Radiation and Radon · Optical Radiation Effects (UV and Lasers)
Financial servicesAssess organisational causes of stress
What could go wrong?
A restructure raises workloads and reduces role clarity. Prolonged pressure may contribute to ill health and absence.
How could you apply the learning?
Use confidential consultation and organisational evidence to evaluate demands, control, support and change. Propose practical workload and management measures with worker participation.
Who checks that it works?
The executive sponsor tracks agreed improvements and follow-up feedback. Treat sickness data carefully and avoid attributing individual diagnoses without clinical evidence.
Study references 2.3 Consultation and worker representation · 10.2 Mental health, fatigue and violence
Apply it with SHAREhub Safety Representatives and Worker Consultation · Mental ill-health, wellbeing, fatigue and workplace violence · Fatigue Management
Transport servicesManage fatigue through work design
What could go wrong?
Maintenance teams work overtime before driving home or starting safety-critical tasks. Fatigue can reduce attention and decision quality.
How could you apply the learning?
Analyse actual shifts, rest, travel and workload. Evaluate staffing, scheduling and reporting arrangements, taking account of relevant sector requirements with specialist support.
Who checks that it works?
The operations director reviews actual hours and fatigue concerns and verifies that the revised plan is workable during disruption.
Study references 10.2 Mental health, fatigue and violence · 11.12 Workplace transport and road risk
Apply it with SHAREhub Mental ill-health, wellbeing, fatigue and workplace violence · Fatigue Management · Workplace Transport and Work-Related Driving
Waste processingEvaluate control of biological exposure
What could go wrong?
Workers handle decomposing material near enclosed processing equipment. Bioaerosols may affect respiratory health.
How could you apply the learning?
Review the process, containment, ventilation and exposure patterns with competent hygiene advice. Check maintenance, cleaning and appropriate health arrangements alongside engineering measures.
Who checks that it works?
The plant manager verifies control performance under normal and foreseeable abnormal work and reviews symptoms through appropriate confidential routes.
Study references 10.10 Biological hazards and accidental exposure · 10.9 Occupational hygiene and sampling
Apply it with SHAREhub Sharps Awareness · Hand Hygiene and Infection Prevention · Occupational Exposure Limits and Workplace Exposure Limits
TelecommunicationsMake an ethical decision under pressure
What could go wrong?
A client requests rapid rooftop work before suitable access and rescue arrangements are ready. Schedule pressure creates a foreseeable fatal fall risk.
How could you apply the learning?
Present the unresolved controls, options, cost and programme implications clearly. Escalate the decision and require an adequately planned, authorised method before the work proceeds.
Who checks that it works?
The accountable manager records the decision and obtains competent verification of access and rescue. Review procurement incentives that encouraged the pressure.
Study references 6.1 Ethics, professional judgement and influence · 7.1 External pressures and strategy
Apply it with SHAREhub Professional Skills, Ethics and Influence for Health and Safety Practitioners · Societal Factors Influencing Health and Safety Strategy
What should you check before your assessment?
Confirm access to a suitable organisation for DN1 and plan time for each unit’s assessment window with your Learning Partner.
How do the two papers in the DN1 assignment work?
Submit both papers at the same sitting. Paper 1 uses simulation questions. Paper 2 draws on workplace activities, reflection and a research project. Arrange workplace permission, evidence access and time to reflect before the sitting. Use the instructions accompanying your actual assessment to determine the format and what you may include. Keep identifying details confidential.
What if I am between jobs or cannot use my own workplace for DN1?
A suitable organisation can be one you have permission to access. It must give enough scope to carry out the assigned activities and obtain genuine evidence. Discuss a proposed site with your Learning Partner before committing. Agree what you may observe, whom you may interview and how you will protect confidential material. Ask for an alternative if access is too limited to support the activities.
What is the Diploma level and how many credits does it carry?
The May 2023 National Diploma is RQF Level 6, qualification number 610/2228/7. The qualification page and learner guide give 43 credits. The June 2025 Learning Partner guide has an inconsistent summary showing 42, although the unit credits in the same guide add to 43. Use the qualification number and ask NEBOSH to confirm the award details in writing if an employer or university requires formal equivalence.
Is there a closing interview for each Diploma assessment?
NEBOSH requires a closing interview after each assessment. Keep your appointment details and be ready to explain in your own words the evidence, reasoning and choices in your submission. Contact your Learning Partner promptly if you cannot attend or need an adjustment. Follow the identity and attendance instructions they give you for that sitting.
How do I calculate a National Diploma pass, credit or distinction?
The provisional pass mark is 50% in each unit. Once all three units are passed, add the three percentage marks. A total of 150–195 earns a pass, 196–225 a credit and 226 upwards a distinction. For example, 68, 70 and 62 total 200, a credit. A mark of 49 in a unit under a 50% pass standard leaves that unit outstanding even if the total is high.
My paperwork says ND1, ND2 or ND3. Which Diploma rulebook applies?
ND1, ND2 and ND3 identify the 2020 specification. The May 2023 National Diploma uses DN1, DN2 and DN3. Earlier awards also used different arrangements. Check the exact title, specification, unit code and registration record with the Learning Partner before choosing assessment instructions or relying on credit. Use NEBOSH’s transition guidance for the specific record.
Can I study while working full time?
Yes, if you can protect enough regular study time and arrange the assessment period. Compare day release, evening study, taught blocks and supported online learning with your shift pattern. Ask about tutor access, missed sessions and practice feedback. Agree any workplace evidence collection and study leave with your employer before enrolling.
What should I ask a Learning Partner before paying?
Ask for a written breakdown of tuition, materials, assessment registration, resits and any additional support costs. Confirm accreditation for the exact qualification, the specification taught, assessment dates, tutor access and how workplace access is supported. Compare the complete package and your available time. Fees and funding depend on the provider and your circumstances.
Can disability, dyslexia or another access need be supported?
Discuss your needs with the Learning Partner early so it can apply for appropriate access arrangements or reasonable adjustments. NEBOSH determines the approved arrangement. Confirm it before the assessment and raise any mismatch promptly. The aim is fair access while retaining the assessment standard.
Can I use SHAREhub AI or another AI tool during an assessment?
Only use AI if your specific assessment instructions or an approved reasonable adjustment explicitly permit it. NEBOSH’s current malpractice policy otherwise prohibits AI use during assessment. Keep assessment questions and controlled materials out of AI tools. Use SHAREhub for general learning outside assessment conditions and produce your own assessed work.
Does passing make me a competent safety adviser?
Passing provides evidence of assessed learning. Competence also depends on relevant skills, experience and behaviours, and on the complexity of the work. Build supervised practice, seek feedback, keep knowledge current and recognise when to involve a specialist. An employer or client should evaluate what you can reliably do in the actual role.
Will this guarantee a job or professional membership?
No qualification can guarantee a job or a membership grade. Employers consider relevant experience, communication, judgement and the needs of the role alongside learning. Check the professional body’s current requirements for your exact award, experience and continuing development before claiming eligibility.
What should I do if I receive a refer result?
Use the result notice and available feedback to identify the outstanding requirement, then agree further study and re-entry with your Learning Partner. Confirm the applicable specification, unit validity and fees before booking. If you believe the result should be reviewed, ask promptly about the current NEBOSH enquiries-about-results process and its deadline.
Does the framework level mean this is the same as another qualification?
A framework level describes the demand of learning. It does not make two awards identical in size, subject coverage or purpose. Always give the framework name, qualification title and specification. Credits describe learning volume, while professional recognition and permission to undertake a role have separate requirements.
What responsibilities can I take on after this qualification?
Use this advanced learning to analyse risk, advise leaders and evaluate management arrangements. Build role-specific experience, technical skills, sound judgement and continuing development alongside it. Specialist engineering, medical and legal decisions still require the relevant expertise and authority.
How does this compare with other NEBOSH qualifications?
Choose the Diploma when your role involves evaluating evidence and advising senior decision-makers. The General Certificate provides a foundation for people building up to that responsibility.
- NEBOSH National General Certificate — Use the General Certificate to manage everyday workplace risks, investigate what went wrong and carry out a practical risk assessment.
- NEBOSH Health and Safety Management for Construction (UK) — Learn to make safety decisions as a construction project changes, from early planning to handover between trades.
- NEBOSH HSE Certificate in Process Safety Management — Learn to recognise how process incidents develop and how a site can check the barriers that prevent or limit a major release.
- NEBOSH Certificate in Fire Safety — Learn to assess how a fire could start, who could be harmed and whether prevention, protection and evacuation arrangements are adequate.
Where can you check the official syllabus and assessment guidance?
NEBOSH publishes the syllabus and assessment guidance for this qualification. Match the unit code and specification on your registration to the guides below.
- National Diploma, recognition and assessment calendar
- Diploma learner guide
- Diploma syllabus and assessment criteria
- Digital Diploma assessment guidance
- Changes from the earlier Diploma specification
- Find an accredited Learning Partner
- NEBOSH assessment integrity and current malpractice policy
- NEBOSH access arrangements and reasonable adjustments
How can an adviser use Diploma learning to make a workplace decision?
A qualification supplies relevant learning; competence also needs evidence of applying it to the particular role. Separate familiar decisions from specialist work that remains outside the person’s current capability.

Role decisions
List the decisions the job actually requires, including routine work, changes and foreseeable abnormal conditions.
Relevant learning
Match learning needs to those decisions and verify the current qualification specification with NEBOSH and the Learning Partner.
Observed work
Use suitable observed tasks, reasoning and work outputs to assess application; possession of a certificate is not local task authorisation.
Mentor feedback
Record feedback, support and reassessment after new experience. A learning log should show what changed in practice.
Specialist boundary
Escalate unfamiliar high-hazard design, clinical or other specialist questions. A higher qualification does not remove the boundary.
Review scope
Review role requirements and capability when work changes. Keep assessment dates and professional-membership checks in their own current-information lane.
Use the awarding body for current assessment/specification information. This route makes no automatic professional-membership or employer-authorisation promise.
How should you decide whether this route fits the job?
Start with the decisions the role must own and the training, skills and experience needed for those decisions.
How should you decide whether this route fits the job?
Read the complete visual as text
- Start with the decisions the role must own and…: Start with the decisions the role must own and the training, skills and experience needed for those decisions.
- Compare a diploma, shorter training and specialist support against…: Compare a diploma, shorter training and specialist support against the role. Before paying, request current syllabus, fees, accessibility and assessment details through an approved procurement route; this page does not verify those commercial terms.
Compare a diploma, shorter training and specialist support against the role. Before paying, request current syllabus, fees, accessibility and assessment details through an approved procurement route; this page does not verify those commercial terms.
There is no mandatory qualification entry requirement, but General Certificate-level prior knowledge is strongly recommended. Recommended English is IELTS-equivalent 7.0. Plan for at least 191 taught hours, 144 recommended self-study hours and 80 assessment hours. Register with an accredited Learning Partner and complete the relevant learning; use NEBOSH’s Learning Partner finder, NEBOSH National Diploma overview and timetable and your actual sitting/registration notice. Compare fees, support and accessibility separately.
Which qualification details need independent verification?
The current award is the NEBOSH Level 6 National Diploma for Occupational Health and Safety Management Professionals, May 2023 specification: Ofqual-regulated RQF Level 6, 43 credits, qualification number 610/2228/7.
The DfE funding record identifies the exact title, qualification number 61022287 and Level 6 in England; it does not verify current units, assessment or professional membership by itself. Use the GOV.UK regulated qualification register to check whether the exact award is listed for England or Northern Ireland. The employer must still test real workplace decisions; a title or level alone is not competence evidence.
The January 2024 publication date of NEBOSH Diploma learner guide v1.1 does not replace its May 2023 specification date. The DfE entry is a funding record, so it is not by itself evidence for syllabus or professional recognition; use NEBOSH and the Ofqual record for those award facts. All three units must be passed.
Returning learner route, checked 19 October 2026. July 2020 learners transferred automatically to the May 2023 specification with successful units recognised; these schemes were not dual-running. Achieved awards remain valid. NEBOSH 2020/2023 transition FAQ explains this. The separate 2015 A/B/C/DNI assessment route ended in February 2026; use NEBOSH’s withdrawn-route notice, not an old resit schedule.
How should learning transfer into real work?
Use the diploma to frame a problem, test evidence, propose controls and explain uncertainty; verify the method with the specialist and employer who own the work.
For example, a candidate studying a chemical-exposure scenario should identify the substance and route, ask for reliable exposure information, choose prevention and engineering controls before personal protection, and present a decision with a residual-risk owner. An answer written for a case study is not a workplace permit. Real work requires current law, process information, worker input, a competent assessment and management authority.
Is a NEBOSH Diploma legally required or sufficient?
No general GB or NI rule makes this diploma the universal qualification for a safety adviser; employers must secure suitable competence, information, training and supervision for their risks.
HSE describes competence as training, skill, experience and knowledge applied to a task. HSENI likewise explains that the necessary mix depends on the work and specialism and that regulations do not always name a qualification. Some specific activities have separate legal or sector-specific competence conditions. Check those conditions for the actual job rather than using a diploma title as blanket authority. Sources: HSE appoint a competent person, HSENI competent person guidance, GB Management Regulations 1999, NI Management Regulations 2000.
The GB Management Regulations 1999 and NI Management Regulations 2000 have separate competent-assistance and training provisions. The National Diploma can help interpret them, but advice on an NI workplace must use NI law and regulator guidance rather than copying a GB answer.
What study checks matter?
Agree protected time, feedback, practical support and confidentiality before enrolment.
Use the official assessment guidance and your registration notice for submission rules; agree commercial, support and workplace-permission arrangements with the Learning Partner. Use workplace examples only with appropriate permission and without exposing confidential records.
| Unit | Official format and effort | Submission window |
|---|---|---|
| DN1 | Workplace/simulation tasks, reflection and research assignment; about 40 hours | Four weeks (20 working days) |
| DN2 | Scenario case study on workplace health; about 20 hours | Two weeks (10 working days) |
| DN3 | Scenario case study on workplace safety; about 20 hours | Two weeks (10 working days) |
These effort estimates differ from the submission windows; check the published sitting dates, including any holiday adjustments. The post-assessment authenticity interview forms part of the assessment process. NEBOSH Diploma learner guide v1.1 and NEBOSH National Diploma overview and timetable give the official basis. Employer observation and the BuildOut exercises are separate from NEBOSH submissions.
Distinguish an achieved award from unfinished-unit validity. NEBOSH Diploma enrolment policy v10 starts with five years; after the first successful unit, the start is its declaration date. A unit that stops counting must be retaken. Expired enrolment requires re-enrolment and all units; an extension depends on approval and evidence, not an automatic extra year. Moving Learning Partner does not reset the period. To improve a completed qualification’s grade, notify NEBOSH within 20 working days of the final successful result and check the linked learner-guide fee/refund rules. Ask NEBOSH and the Learning Partner to confirm the individual record.
How should employers assess competence by role?
Test what each person can decide in practice; a course result is one piece of evidence in a role-specific competence system.
Frontline workers need task instruction and can demonstrate safe work and stopping conditions. Supervisors need planning, change and contractor coordination skills. Managers need to resource controls and challenge weak evidence. Diploma-level advisers need to frame options, state legal scope, know their limits and seek specialist review. The employer should name an assessor, retain observed evidence, and reassess after new work, incidents or long gaps in practice.
| Role | Learning and decision | Practical evidence | Assessor | Reassess when |
|---|---|---|---|---|
| New starter or worker | Learn task hazards, existing controls and when to stop; a Diploma is not required for general awareness. | Explains a task hazard and demonstrates the local stop route. | Supervisor observes the task and keeps the induction/observation record. | New task, defect or poor demonstration |
| Frontline supervisor | Plan work, coordinate contractors and challenge a changed method. | Observed briefing, field check and documented hold/release. | Operations manager reviews an actual job and its hand-back. | Incident, new contractor or changed method |
| Safety manager or Diploma holder | Analyse evidence, identify legal location and options, and state where specialist judgement is needed. | Reviewed advice, site observation and an explicit scope/escalation decision. | Director or experienced competent lead assesses work samples and field decisions. | New high-hazard task or weak advice |
| Technical or occupational-health specialist | Interpret measurements or clinical questions within the relevant professional scope. | Technical report or confidential clinical advice, with limits and sign-off. | Relevant specialist lead checks method and competence; employer retains work-facing conclusion. | New material, method or evidence |
| Appointing manager or purchaser | Set the role specification, resource controls and decide whose advice can be accepted. | Recorded appointment scope, challenged recommendation and funded control. | Senior dutyholder samples a live risk decision and its verified result. | Role change, failed control or audit concern |
| Auditor or professional adviser | Test whether qualification learning has transferred into effective controls and escalation. | Traceable sample of records, field checks and closed corrective actions. | Audit lead reviews sampling and independence. | New system, repeated event or material legal change |
What does professional recognition mean?
A qualification does not automatically grant professional membership, chartered status or authority to sign off a hazardous task.
What does professional recognition mean?
Read the complete visual as text
- A qualification does not automatically grant professional membership, chartered…: A qualification does not automatically grant professional membership, chartered status or authority to sign off a hazardous task.
- Claims about any membership grade, credit or transition route…: Use the current NEBOSH award and recognition records for academic eligibility; membership and chartered status require the professional body’s separate conditions. Employers should assess task-specific competence through observation, evidence challenge and specialist escalation.
Use the current NEBOSH award and recognition records for academic eligibility; membership and chartered status require the professional body’s separate conditions. Employers should assess task-specific competence through observation, evidence challenge and specialist escalation.
Academic eligibility to apply is separate from an awarded membership grade or chartered status. Check the NEBOSH recognition update and the professional body’s current experience and application conditions.
How does a management standard relate to a qualification?
A management standard helps an organisation organise and check its controls. A qualification records an individual’s assessed learning. The employer must still plan, control, check and improve the measures for this task. For a particular role, verify that the adviser can turn an assessment into controls, field checks and decisions within their scope.
A qualified practitioner may use a management system to plan participation, risk control, monitoring and improvement. The employer still needs evidence that a specific worker can apply the controls. Source: HSE management-system guidance.
How should a Diploma holder handle a request outside their specialist scope?
Identify the decision and its technical owner, contribute within demonstrated competence and hold specialist acceptance until suitable expertise is available.
Consider a newly appointed safety manager asked to approve a proposed vessel-entry method. The manager can assemble the task description, question the need for entry, identify the jurisdiction and check that a competent specialist is engaged. Holding a Diploma does not itself establish competence to design isolation, select gas instruments or approve rescue arrangements for unfamiliar plant. See HSE appoint a competent person. Also see HSE confined spaces (GB task guidance). Also see HSE introduction to confined-space work.
The director should define which decisions the manager may make and which require technical advice. Map observed experience against the actual risk, rather than using job title or qualification level as a proxy. The manager needs enough understanding to recognise missing evidence and escalate it; the technical owner must have the relevant knowledge, experience and authority for the specific decision. See HSENI competent person guidance.
A proportionate development plan may include observation, supervised participation, reviewed analysis and a practical assessment within the safe system. Record the task family and boundaries demonstrated, the assessor and the unresolved specialist gaps. This is an employer competence example, not a statement about Diploma syllabus units or a statutory licensing scheme. See HSENI competent person guidance.
Decision basis: HSE appoint a competent person. HSENI competent person guidance. The scenario and suggested records are illustrative; apply the source within its stated jurisdiction and the assessed work.
What should mentored learning change in an assurance review?
It should improve the quality of decisions and control evidence, with feedback on real work rather than only completion of study.
For a mentored contractor-control review, agree a question before the visit: whether the accepted method matches the work and whether critical barriers are effective. The learner reviews the relevant official source, observes the actual task and listens to the workers. The mentor challenges assumptions, checks the legal location and distinguishes a documented rule from a control that works in use. See HSE health and safety training.
Afterwards, assess the proposed actions for ownership, feasibility, stronger control options and acceptance evidence. Revisit a sample of completed actions in the field. A well-written report that cannot identify whether a barrier was repaired is weaker evidence than a concise analysis with a verified decision. The employer should revise authorisation if changed work exceeds the assessed scope. See HSE management-system guidance.
Decision basis: HSE health and safety training. HSE management-system guidance. The scenario and suggested records are illustrative; apply the source within its stated jurisdiction and the assessed work.
Which qualification-record questions should a learner be able to answer?
Explain the exact award identity and the purpose of each record, then distinguish those facts from syllabus, recognition and workplace competence.
Learning check: a manager treats the Department for Education funding record as proof that a candidate is competent for every safety task. The correct answer is that the record establishes the particular title, number, level and funding-related information it displays; it is not an assessment of that individual's practical ability. See DfE qualification record.
Learning check: a provider claims professional membership follows automatically. The learner should ask for the current eligibility decision and avoid inferring it from a funding record or an award's level. Current provider units, assessment arrangements and professional recognition remain separate checks; do not invent them from an older course description. See Regulated qualification register.
A useful enrolment record states the learner's intended role, prerequisites and support needs, the exact award being offered and how learning will be applied and assessed at work. Keep the education record, the learner's personal achievement and the employer's task authorisation as distinct evidence items. See Regulated qualification register.
Decision basis: DfE qualification record. Regulated qualification register. The scenario and suggested records are illustrative; apply the source within its stated jurisdiction and the assessed work.
Which qualification terms matter?
NEBOSH is the awarding body, qualification status describes the award, and competence describes what a person can do safely at work. HSE and HSENI are the health and safety regulators for Great Britain and Northern Ireland respectively.
| Term | Expansion or meaning | Use here |
|---|---|---|
| DfE | Department for Education | DfE funding record identifies the Level 6 award and number 61022287. |
| Qualification status | Whether the named award appears on a government qualification record | Verify the exact award and jurisdiction before enrolment. |
| Competence | Knowledge, skill and experience applied to a specific task | Assess actual work; an award alone is not task authorisation. |
| HSE | Health and Safety Executive | Great Britain workplace regulator; use its guidance within scope. |
| HSENI | Health and Safety Executive for Northern Ireland | Northern Ireland workplace regulator; NI duties have separate instruments. |
| GB | Great Britain | England, Scotland and Wales; distinguish the NI legal route. |
| NI | Northern Ireland | Use the Northern Ireland legislation and regulator route. |
| NEBOSH | National Examination Board in Occupational Safety and Health | Awarding organisation name; qualification is distinct from task authorisation. |