SHARE Knowledge Hub
Optical Radiation Effects (UV and Lasers)
Optical radiation includes ultraviolet, visible and infrared light; harmful workplace exposure can come from welding arcs, UV lamps, intense light or lasers, while outdoor workers face solar UV. Artificial optical radiation has specific GB and Northern Ireland rules, whereas sunlight needs separate work-risk control. Assess the source, beam or exposure route, access and maintenance state before choosing enclosure, shielding, scheduling and residual eye or skin protection.
Understanding Optical Radiation Effects (UV and Lasers)
Optical radiation includes ultraviolet, visible and infrared light; harmful workplace exposure can come from welding arcs, UV lamps, intense light or lasers, while outdoor workers face solar UV. Artificial optical radiation has specific GB and Northern Ireland rules, whereas sunlight needs separate work-risk control. Assess the source, beam or exposure route, access and maintenance state before choosing enclosure, shielding, scheduling and residual eye or skin protection.
Why this matters at work
High-power laser exposure can cause retinal or other eye damage, sometimes with visual disturbance but little immediate pain. Intense visible light can dazzle or cause afterimages and may create a secondary accident risk during driving or precision work. Infrared and thermal sources may cause burns or contribute to lens injury depending on exposure.
Acute UV eye exposure can cause photokeratitis or photoconjunctivitis, often called arc eye or welder flash. Pain, gritty sensation, tearing, red eyes and light sensitivity may appear hours after exposure. A worker who feels fine immediately after an arc exposure has not necessarily escaped injury.
How organisations manage this in practice
If robust controls cannot demonstrate adequate protection, HSE guidance calls for more detailed assessment, calculation or measurement by competent specialists and stopping work until risk is sufficiently controlled. Record controls and communicate them to staff as required.
Review after a new source, changed mode, altered layout, removed shielding, new worker group, near miss, injury or supplier warning. For outdoor work review sunburn reports, shade availability, scheduling and whether protective clothing is usable in heat.
Use suitable room controls, access restriction, manufacturer-approved filters and eye protection selected for the device and task. Assess treatment-room maintenance and cleaning, when guards may be removed. Workers should know who can change settings and how to stop the source.
Written methods should define access, start-up, alignment, isolation, filter inspection, warning signs, competence and emergency stop. A sign tells people about a controlled area but cannot make an open beam or arc safe on its own.
A contractor welding in a shared workplace needs a coordinated work area, pre-task briefing, hot-work and fire controls as applicable, and a route for other workers. Welding fume, fire and electrical risks remain separate important hazards.
How can I practise this topic in 3D?

Hot work is proposed outside the controlled bay
All related inspection points 2 across 1 location
Construction site 2 inspection points
Practice in the SHAREhub environment. Browser practice is separate from workplace competence and formal learning records.
What is optical radiation?
Optical radiation is light energy, including ultraviolet, visible and infrared radiation.
Optical radiation types and workplace meaning — part 1 of 2
Read the complete visual as text
- Ultraviolet (UV): Plain-English meaning: Short-wavelength light beyond visible violet; can damage skin and eyes. Workplace examples: Sunlight, welding arcs, UV curing, germicidal lamps, sunbeds.HSE optical radiation overview
- Visible light: Plain-English meaning: Light the eye can see; intense sources can still harm vision. Workplace examples: Lasers, powerful lamps, projectors, arc processes.HSE optical radiation overview
- Infrared (IR): Plain-English meaning: Longer-wavelength radiation often experienced as heat. Workplace examples: Furnaces, molten metal, glass work, infrared heaters.HSE optical radiation overview
Optical radiation types and workplace meaning — part 2 of 2
Read the complete visual as text
- Laser radiation: Plain-English meaning: Light amplified into a directed beam that may be highly concentrated. Workplace examples: Alignment lasers, cutting, engraving, surveying, medical and laboratory devices.HSE optical radiation overview
- Embedded laser: Plain-English meaning: A higher-class laser enclosed inside equipment. Workplace examples: Printers, scanners or machines that are safe while casing remains intact.HSE optical radiation overview
- Artificial optical radiation: Plain-English meaning: Non-sunlight optical radiation generated by equipment. Workplace examples: Covered by the Control of Artificial Optical Radiation at Work Regulations where hazardous.HSE optical radiation overview
The phrase optical radiation can sound specialist, but the workplace examples are familiar: sunlight on outdoor workers, welding arcs, UV curing lamps, germicidal UV equipment, sunbeds, infrared heaters, intense visible light and lasers. The hazard depends on wavelength, intensity, distance, exposure duration, body part exposed and whether the beam or lamp is enclosed.HSE optical radiation overview
UV is particularly important because it can damage skin and eyes even when people do not feel heat. Lasers are important because energy can be concentrated into a beam, making eye injury possible very quickly. Infrared radiation may create heat stress, burns or eye risks in some high-temperature processes.
A serious risk assessment does not simply ask whether a lamp or laser is present. It asks whether workers can access hazardous emissions during use, maintenance, alignment, cleaning, fault-finding or defeat of guarding. Many high-risk exposures occur when the normal enclosure or interlock has been opened.
| Type | Plain-English meaning | Workplace examples |
|---|---|---|
| Ultraviolet (UV) | Short-wavelength light beyond visible violet; can damage skin and eyes. | Sunlight, welding arcs, UV curing, germicidal lamps, sunbeds.HSE optical radiation overview |
| Visible light | Light the eye can see; intense sources can still harm vision. | Lasers, powerful lamps, projectors, arc processes.HSE optical radiation overview |
| Infrared (IR) | Longer-wavelength radiation often experienced as heat. | Furnaces, molten metal, glass work, infrared heaters.HSE optical radiation overview |
| Laser radiation | Light amplified into a directed beam that may be highly concentrated. | Alignment lasers, cutting, engraving, surveying, medical and laboratory devices.HSE optical radiation overview |
| Embedded laser | A higher-class laser enclosed inside equipment. | Printers, scanners or machines that are safe while casing remains intact.HSE optical radiation overview |
| Artificial optical radiation | Non-sunlight optical radiation generated by equipment. | Covered by the Control of Artificial Optical Radiation at Work Regulations where hazardous.HSE optical radiation overview |
How does optical radiation harm eyes and skin?
Optical radiation harms tissue when energy is absorbed by the eye or skin faster than the body can tolerate.
Eye harm depends strongly on wavelength. UV can affect the cornea and outer eye, causing painful inflammation sometimes described as like grit or sand in the eye. Visible and near-infrared laser light can be focused by the eye onto the retina, which is why some laser exposures can cause serious permanent injury. Infrared and intense heat sources may contribute to thermal eye or skin injury.HSE optical radiation overview HSE lasers
Skin harm ranges from sunburn and redness through to premature ageing and increased skin cancer risk from repeated UV exposure. A key teaching point is that harm may occur before workers feel anything. Cloud, wind and cooler weather can create false reassurance during outdoor work.
| Exposure | Main body effect | Warning signs or consequences |
|---|---|---|
| Solar UV | Skin burn, accelerated ageing and skin cancer risk; eye irritation or damage. | Redness, blistering, painful eyes, changing skin lesions over time.HSE optical radiation overview HSE lasers |
| Welding arc UV | Arc eye and skin burns where protection is poor. | Painful eyes after exposure, redness and skin burn.HSE optical radiation overview HSE lasers |
| High-power laser | Retinal or eye injury, potentially permanent. | Flash, blind spot, pain or visual disturbance after exposure.HSE optical radiation overview HSE lasers |
| UV curing or germicidal lamp | Eye and skin exposure if enclosure/interlock fails. | Painful eyes, erythema or exposure incident.HSE optical radiation overview HSE lasers |
| Infrared/high heat | Skin burns, heat stress or eye heating depending on source. | Heat discomfort, burns or eye strain.HSE optical radiation overview HSE lasers |
| Intense visible light | Glare, visual discomfort or retinal risk at high intensities. | After-image, dazzle or visual disturbance.HSE optical radiation overview HSE lasers |

How does the eye turn light into vision, and how do workplace hazards injure it?
Interactive anatomy · Eye function and injury · Updated 2026-10-23
Read all anatomy and process explanations without the viewer
Educational illustration, not a diagnostic symptom checker or a reproduction of an individual’s vision. No acuity/brightness challenge, flashing screen, camera permission, eye-drop prescription, patching instruction, lens-removal manoeuvre or home-neutralisation exercise. Ordinary DSE comfort is separate from trauma; eyesight correction is separate from hazard protection.
Eyelids
Blinking spreads tears over the front of the eye. The eyelids pass over the exposed front of the eye when a person blinks. Their movement spreads the tear film, helping keep that surface moist and smooth. In the surface view, use the lid margins to locate the area they cover. This surface-maintenance role supports the optical pathway; the lid does not carry visual signals to the brain. Moorfields Eye Hospital NHS Foundation Trust: Dry eye: the tear film
Tear film
A thin tear layer keeps the surface moist and smooth. A thin film of tears covers the front of the eye. It lubricates the surface and contributes to a smooth boundary through which light passes. Blinking redistributes this film. Its thickness is enlarged in the teaching view so its position can be seen; it is a surface layer rather than a pool of liquid inside the eyeball. Moorfields Eye Hospital NHS Foundation Trust: Dry eye: the tear film
Cornea
The clear front surface bends incoming light. The transparent cornea forms the curved front of the eye, providing an outer protective boundary and bending incoming light. It works with the lens to focus the light towards the retina. Follow the rays through the front curve in the cutaway, then compare its location with the tear film lying over the surface. Moorfields Eye Hospital NHS Foundation Trust: What makes up your eye
Iris
The coloured ring controls the pupil opening. The iris is the coloured ring around the pupil. Its muscles change the size of the opening and so control how much light can enter the eye. Locate the ring separately from the transparent lens behind it. This light-entry role is different from the focusing work performed by the cornea and lens. Moorfields Eye Hospital NHS Foundation Trust: What makes up your eye
Pupil
An opening lets light enter the eye. The pupil is the central opening in the iris through which light passes. It looks dark when viewed from the front because it opens into the inside of the eye. It is not a solid black disc. In the cutaway, follow the route through this opening towards the transparent lens behind it. Moorfields Eye Hospital NHS Foundation Trust: What makes up your eye
Lens
The clear lens helps focus light on the retina. The transparent lens sits behind the iris and adds to the focusing action of the cornea. In a living eye its shape can change to help focus on objects at different distances. Use the cutaway to locate the lens between the pupil opening and the retina; the simplified ray diagram is not an eyesight test. Moorfields Eye Hospital NHS Foundation Trust: What makes up your eye
Retina
The light-sensitive layer lines the back of the eye. The retina is the light-sensitive tissue lining the inside of the back of the eye. Light focused by the cornea and lens reaches this layer, where specialised cells begin converting it into electrical information. Its position against the inner wall connects the whole-eye view with the separate enlarged photoreceptor inset. Moorfields Eye Hospital NHS Foundation Trust: What makes up your eye · Oxford University Hospitals NHS Foundation Trust: Tackling vision loss: normal signal pathway
Photoreceptors
Specialised retinal cells begin the light-to-signal conversion. Photoreceptors are specialised cells in the retina that respond to light and begin the conversion into electrical signals. Locate the retinal lining first, then connect it with the enlarged cell inset. That inset explains a change of process and scale; it does not represent a separate organ or every cell involved in retinal processing. Oxford University Hospitals NHS Foundation Trust: Tackling vision loss: normal signal pathway
Optic nerve
Visual signals travel from the eye towards the brain. The optic nerve carries electrical information from the retina towards the brain. In the model, the symbol changes from a light ray to a neural signal at the retina to distinguish these processes. Locate where the nerve leaves the back of the eye. Light itself does not travel along the nerve as a beam. Oxford University Hospitals NHS Foundation Trust: Tackling vision loss: normal signal pathway
Brain destination
The brain processes the incoming visual signals. The brain processes the visual information arriving from the eyes, helping us make sense of what we see. This marker shows a destination outside the eyeball rather than a structure within it. Follow the optic-nerve route to the marker after locating the retina; the detailed pathways inside the brain are not depicted here. Oxford University Hospitals NHS Foundation Trust: Tackling vision loss: normal signal pathway
Open the complete process transcript
The process, step by step
1 · Refresh the surface
A blink carries a thin layer of tears across the exposed front of the eye. This tear film keeps the surface moist and helps create a smooth first surface for incoming light. Look at the eyelids and the enlarged tear layer together: the lid spreads the film rather than pushing tears into the eyeball. The surface view separates these structures so their relationship is easier to see. This is the preparation for the optical pathway that follows; a clear view depends on the condition of the front surface as well as the structures deeper inside. Moorfields Eye Hospital NHS Foundation Trust: Dry eye: the tear film
What to watch: Locate the eyelid margins and the thin tear layer in front of the cornea, using the surface view to separate them.
Why it matters: The refreshed film lubricates the front of the eye and helps keep its surface smooth. It supports the passage of light before the cornea and lens focus that light deeper inside.
Explore this step: Select the eyelids, then the tear film, and describe which structure moves and which surface it covers.
2 · Bend incoming light
The cornea is the transparent, curved front of the eye. Incoming light changes direction as it passes through this surface, beginning the focusing process. In the whole-eye cutaway, trace the illustrative rays from outside the eye towards the lens. Their bend shows the cornea doing optical work rather than acting only as a window. The cornea also forms part of the protective outer boundary, so its clarity and shape matter to seeing. The rays simplify the route through a healthy eye; they are not a measurement of an individual person’s focus or vision. Moorfields Eye Hospital NHS Foundation Trust: What makes up your eye
What to watch: Find the clear curved front of the eye and follow where the incoming light rays change direction as they pass through it.
Why it matters: Beginning to direct the light here allows the cornea and lens to work together. A transparent front surface lets light enter while forming part of the eye’s protective boundary.
Explore this step: Trace one ray from outside the cornea to the lens and identify the first place its direction changes.
3 · Focus towards the back
After passing through the cornea, light enters through the pupil, the opening in the coloured iris. The iris changes the size of that opening to control how much light enters. Behind it, the transparent lens works with the cornea to bring light towards the retina at the back. Follow the model from front to back and distinguish the pupil opening from the solid lens. In a living eye the lens can change shape to help focus at different distances. This simplified view explains the route and the relationship between the structures, rather than testing accommodation or eyesight. Moorfields Eye Hospital NHS Foundation Trust: What makes up your eye
What to watch: Identify the iris around the pupil opening, the transparent lens behind it and the light-sensitive retina lining the back of the eye.
Why it matters: Controlling light entry and focusing it are different jobs. Together they allow light to reach the sensitive tissue at the back in a useful pattern for the next stage of vision.
Explore this step: Name the opening light passes through, then the transparent structure it reaches next; follow the route to the retina.
4 · Convert at the retina
The retina is the light-sensitive tissue lining the back of the eye. Its photoreceptor cells respond to light and begin converting it into electrical information. Locate the retinal lining, then use the enlarged cell inset to connect the whole-eye view with this smaller-scale event. The inset makes the conversion easier to discuss without suggesting that the cells are that large inside the eye. At this point the lesson changes from the path of light to the path of a nerve signal. The model does not show every retinal cell or all the processing that takes place between them. Oxford University Hospitals NHS Foundation Trust: Tackling vision loss: normal signal pathway
What to watch: Locate the retina on the inner back wall, then connect it with the enlarged photoreceptor inset outside the whole-eye cutaway.
Why it matters: This conversion connects the eye’s optical system with its nervous system. The focused light pattern can now be represented by signals that travel from the retina towards the brain.
Explore this step: Point to where the light pathway ends and explain why the enlarged cells are an inset rather than another organ.
5 · Carry and interpret the signal
Visual information leaves the retina through the optic nerve and travels towards the brain. The brain processes this incoming information so that we can recognise and make sense of what we see. Follow the model’s neural-signal symbol from the back of the eye to the external brain marker, and compare it with the earlier light rays. The symbols represent different processes: a nerve carries signals, not a beam of light or a miniature picture travelling through a tube. The brain marker identifies the destination outside the eyeball; the detailed visual pathways within the brain are beyond this simplified model. Oxford University Hospitals NHS Foundation Trust: Tackling vision loss: normal signal pathway
What to watch: Find where the optic nerve leaves the back of the eye and trace its route towards the separate brain destination marker.
Why it matters: The earlier stages deliver and convert light; this stage carries the resulting information onwards. Vision therefore depends on the retina, its nerve connection and the brain working with the eye’s optical structures.
Explore this step: Compare the light-ray and neural-signal symbols, then explain what travels through the pupil and what travels through the optic nerve.
Mechanisms and their limits
Radiation injury · arc-eye Welding radiation can injure the cornea. Pain and redness may appear hours later, and other eye structures can also be affected. The static radiation symbol and patterned surface overlay are different from a metal-fragment impact. No immediate pain does not establish that no injury occurred. No safe viewing-time threshold or obligatory retinal burn is shown. HSE: Health risks from welding: arc-eye
Understand arc-eye and welding hazards
Match eye and face protection to radiation
Radiation injury · arc-eye — follow the anatomy
Look at: The outer corneal cells exposed to ultraviolet radiation.
What changes: Unprotected exposure to a welding arc can injure these cells.
Why it matters: Pain, watering and light sensitivity may begin hours after the exposure.
What to do: Use suitable welding screens and eye protection and obtain medical advice for symptoms.
A nearby unscreened welding arc
A colleague works near a welding station where screening and eye protection are ineffective. Time jump: arc-eye symptoms can begin several hours after exposure. The delayed effect is not shown as an instant beam burning through the eye. This is a UV-related front-of-eye injury example, not a retinal laser injury or a diagnosis from redness.
Consider people around the weld Welding radiation can affect the welder and nearby people. Suitable screens and correctly selected eye/face protection must match the process. HSE: Health risks from welding: arc-eye · HSE: Using the right type of PPE
Radiation reaches the front of the eye The example marks exposure to welding radiation at the cornea. It is not a sound wave or a particle cutting a path to the retina. HSE: Health risks from welding: arc-eye
Later corneal irritation The timeline jumps to a later painful, light-sensitive eye: arc-eye can be delayed. The restrained surface pattern identifies the example region without measuring damage. HSE: Health risks from welding: arc-eye
Get advice and correct protection Stop further exposure and obtain appropriate eye assessment, using emergency help for severe pain or sight changes. Review screening and process-matched protection before resuming the work. NHS: Eye injuries · HSE: Using the right type of PPE
Read the practice situations and all answer explanations
EY-Q1: What should happen first?
A strong cleaning chemical splashes into an eye. Immediate help is displayed before the question.
Watch the demonstration before taking action. — Do not delay rinsing or medical help for this lesson.
Begin rinsing with plenty of clean, non-hot water and get emergency help. — Hold the eye open and use a gentle water flow for at least 20 minutes; keep rinsing while waiting for help.
Add a household chemical to neutralise it. — Use the water-rinsing route and medical help, not improvised chemical neutralisation.
NHS: Eye injuries · University Hospitals Dorset NHS Foundation Trust: Chemical injury to the eyeEY-Q2: What is the appropriate response?
A fragment strikes an eye during grinding.
Seek emergency assessment; leave any pierced object in place. — High-speed impact needs emergency assessment. Do not rub the eye or remove a pierced object.
Pull out anything that appears to be stuck. — Do not attempt removal. Get emergency help.
Return to work if vision seems unchanged. — Feeling able to see is not clearance after a high-speed injury.
NHS: Eye injuries · University Hospital Southampton NHS Foundation Trust: Eye emergency departmentEY-Q3: Which statement is correct?
A worker is close to welding without a task-specific eye-protection assessment.
No immediate pain proves the eyes are unharmed. — Arc-eye pain may start several hours later. Lack of immediate pain does not establish safety.
Ordinary spectacles protect against every welding hazard. — Corrective spectacles are not a complete hazard assessment. Impact, splash and radiation protection require suitable selection.
Protection must match the radiation hazard, and pain may be delayed. — Correct. Control exposure and select appropriate protection for the task and nearby people. The lesson provides no safe viewing time.
HSE: Health risks from welding: arc-eye · HSE: Using the right type of PPESources and how the model is made
The opening images are AI-generated anatomical illustrations. The interactive 3D models and labelled SVG diagrams use original procedural artwork. These teaching images are not medical scans or diagnostic tools. Source references support the learner explanations and do not grant artwork rights.
- Moorfields Eye Hospital NHS Foundation Trust: What makes up your eye — Normal cornea, iris, pupil, lens and posterior eye layout; use anatomy text selectively. No image copied.
- Moorfields Eye Hospital NHS Foundation Trust: Dry eye: the tear film — Blinking spreads the tear film, which lubricates the eye and supports a smooth surface. No treatment instructions copied.
- Guy’s and St Thomas’ NHS Foundation Trust: Corneal abrasion — A scratch/graze of the cornea and the distinction between a superficial injury and complications; no healing-time promise or eye treatment prescribed.
- NHS: Eye injuries — March 2026 guidance: immediate chemical irrigation and emergency help; high-speed/penetrating injury; severe pain or sight changes. Minimum rinsing time is not a clearance test.
- University Hospitals Dorset NHS Foundation Trust: Chemical injury to the eye — Possible surface/anterior-segment damage only. Printed review date November 2023 is overdue; current emergency actions rely on EY-S4, not this leaflet alone.
- HSE: Health risks from welding: arc-eye — Welding radiation can injure the cornea, cause delayed pain and harm other eye structures; no safe viewing time.
- HSE: Using the right type of PPE — Eye protection must match impact, splash, dust or radiation hazards and fit the task/user.
- Oxford University Hospitals NHS Foundation Trust: Tackling vision loss: normal signal pathway — Photoreceptors convert light to electrical signals, carried through the optic nerve to the brain. Research treatment content is not reused.
- NHS Organ Donation: About cornea donation — Injury or disease can leave the cornea cloudy/distorted and affect vision. Source is factual context, not donation advice in this lesson.
- University Hospital Southampton NHS Foundation Trust: Eye emergency department — Chemical injury, penetrating trauma and severe visual symptoms require emergency eye care. Local opening hours/contact instructions are not generalised.
How do UV, visible light, infrared and lasers compare?
The same word radiation can describe very different exposure routes, health effects and controls.
The practical learner distinction is not whether the source is bright. A source can be bright but controlled, invisible but harmful, low risk in normal use but hazardous during maintenance, or safe for skin but dangerous for the retina. The assessor must connect wavelength, source strength, distance, exposure duration, reflection and the body part exposed.HSE optical radiation overview HSE lasers
For control, start with the source and route. UV from outdoor work is often managed through planning, shade, clothing and worker information. UV or infrared from equipment may need enclosure, screens and interlocks. Laser work may need controlled areas, authorisation, competent laser safety advice and eyewear selected by wavelength and optical density.
| Radiation type | Common workplace sources | Main body part harmed | Short-term effect | Long-term effect | Main control |
|---|---|---|---|---|---|
| Ultraviolet (UV) | Sunlight, welding arcs, UV curing, germicidal lamps and sunbeds. | Cornea, conjunctiva and skin. | Arc eye, photokeratitis, painful eyes, redness or sunburn. | Skin cancer risk, premature skin ageing and cataract or eye effects depending on exposure. | Eliminate or enclose source, shade or scheduling, screens, clothing and UV-rated eye and skin protection.HSE optical radiation overview HSE lasers |
| Visible light | Intense lamps, welding glare, projectors, lasers and optical instruments. | Retina and visual system. | Glare, dazzle, after-image or retinal injury at high intensity. | Potential permanent retinal damage from intense or laser exposure. | Reduce intensity, filter or shield, prevent direct viewing and control access.HSE optical radiation overview HSE lasers |
| Infrared (IR) | Furnaces, molten metal, glass work, ovens and infrared heaters. | Skin, lens or eye and whole-body heat load. | Heat discomfort, burns or eye heating. | Chronic eye or heat exposure concerns in high-temperature work. | Distance, shielding, cooling, job rotation, heat controls and suitable face or eye protection.HSE optical radiation overview HSE lasers |
| Lasers | Cutting, engraving, alignment, surveying, laboratory, medical, display and embedded equipment. | Eye first; skin for higher-power beams. | Immediate retinal or corneal injury, flash blindness or burns. | Permanent sight loss or scarring from high-power exposure. | Beam enclosure, interlocks, controlled areas, competent laser safety support and wavelength-matched eyewear.HSE optical radiation overview HSE lasers |
What optical radiation terms do learners commonly confuse?
Learners should distinguish radiation type, beam access, exposure limit language and the control method selected for the task.
Optical radiation becomes easier to understand when it is split into three questions. First, what part of the optical spectrum is involved: ultraviolet, visible or infrared? Second, how is the energy reaching the person: broad source, direct beam, reflected beam or scattered radiation? Third, which part of the body is at risk and what control prevents exposure?HSE optical radiation overview HSE optical radiation law
Artificial optical radiation law uses exposure limit values (ELVs) for the applicable source and exposure conditions. Managers should obtain competent assessment rather than assume a generic numerical limit. HSE artificial optical radiation law
| Term | What it means | Practical control lesson |
|---|---|---|
| UV | Ultraviolet radiation outside the visible range. | Control skin and eye exposure from sun, lamps, curing systems and welding arcs.HSE optical radiation overview HSE optical radiation law |
| Visible light | Light seen by the eye; can still be hazardous when intense or laser-produced. | Control glare, dazzle and retinal exposure from intense sources.HSE optical radiation overview HSE optical radiation law |
| Infrared | Optical radiation often felt as heat. | Control heat, burns and eye exposure near furnaces, molten materials and IR heaters.HSE optical radiation overview HSE optical radiation law |
| Laser class | Classification indicating accessible emission risk under defined conditions. | Use class to decide authorisation, enclosure, training and eyewear requirements.HSE optical radiation overview HSE optical radiation law |
| Direct beam | The primary beam reaches the eye or skin. | Highest concern for open-beam laser work; prevent access.HSE optical radiation overview HSE optical radiation law |
| Reflected beam | Beam reflects from a shiny surface. | Control reflective tools, jewellery, mirrors and polished workpieces.HSE optical radiation overview HSE optical radiation law |
| Scattered beam | Radiation is dispersed by a surface or material. | Usually lower than direct beam but still assess high-power sources.HSE optical radiation overview HSE optical radiation law |
| Eye versus skin effects | Different wavelengths affect cornea, lens, retina or skin differently. | Select controls and eyewear for wavelength, not just brightness.HSE optical radiation overview HSE optical radiation law |
| ELV | Exposure limit value used in artificial optical radiation law for the relevant source and exposure conditions. | Use competent assessment of the applicable GB or NI legal limit; do not infer a single generic number. HSE optical radiation law HSENI artificial optical radiation guidance |
| Controlled area | Area where access is restricted because hazardous emission may be accessible. | Use barriers, signs, authorisation and local rules.HSE optical radiation overview HSE optical radiation law |
| Eyewear selection | Protection chosen for wavelength and optical density. | Wrong glasses can give dangerous false confidence.HSE optical radiation overview HSE optical radiation law |
| Interlocks and signage | Engineering and information controls that prevent or warn of access. | Keep interlocks working; signs support but do not replace enclosure.HSE optical radiation overview HSE optical radiation law |
How can the hierarchy of controls reduce risks while servicing a UV-curing cabinet?
Assessment should identify source, wavelength, exposure route, access, duration, vulnerable workers and maintenance conditions.
How should optical radiation be assessed and controlled? — part 1 of 3
Read the complete visual as text
- Eliminate: Control for this activity: Use external diagnostics or a validated non-UV curing process where that removes exposed UV work.Basis: HSE optical radiation Owner and verification: Task owner verifies that the proposed change removes the named hazardous step, including foreseeable cleaning, maintenance and work transferred elsewhere. Stop / restart decision: If the hazardous step remains, keep it within the task assessment and select the stronger feasible remaining controls.
- Reduce, including substitution: Control for this activity: Evaluate a suitable lower-emission process or lamp system through process and optical-radiation assessment; changed wavelength is not automatically safer.Basis: HSE optical radiation Owner and verification: Competent task/process owner validates suitability, compatibility and new hazards against the actual operating requirements before the alternative is adopted. Stop / restart decision: Reject an alternative if its performance is unproved or its new hazards are unresolved.
- Isolate: Control for this activity: Isolate the lamp supply and other hazardous energy before access and restrict the test area for any necessary authorised functional check.Basis: HSE optical radiation Owner and verification: Supervisor checks the actual boundary, affected people and connected work; verify separation or isolation before allowing access. Stop / restart decision: Hold or stop for unplanned energisation, damaged shielding, defeated interlock or an unassessed lamp change.
How should optical radiation be assessed and controlled? — part 2 of 3
Read the complete visual as text
- Control: physical safeguards: Control for this activity: Maintain suitable enclosures, interlocks and wavelength-appropriate viewing protection; verify that access cannot expose people to hazardous radiation.Basis: HSE optical radiation Owner and verification: Competent equipment/process owner checks lamp identity/spectrum, isolation, enclosure, viewing protection and interlock test. Stop / restart decision: Hold or stop for unplanned energisation, damaged shielding, defeated interlock or an unassessed lamp change.
- Control: work method and response: Control for this activity: Use the approved service/test procedure and define who may energise the source, the test boundary and the acceptance criteria.Basis: HSE optical radiation Owner and verification: Supervisor confirms the work limits, competent cover, communication and stop/restart authority with the people doing this activity. Stop / restart decision: Hold work when the agreed limits, competent cover or effective communication cannot be maintained.
How should optical radiation be assessed and controlled? — part 3 of 3
Read the complete visual as text
- PPE: Control for this activity: Select task-specific eye/face and skin protection from competent assessment. Ordinary clear glasses are not universal UV protection.Basis: HSE optical radiation Owner and verification: Assessor confirms whether personal protection is needed and checks suitability, condition, compatibility and any required fit evidence. Stop / restart decision: Do not use unsuitable protection or rely on PPE to continue after an essential source control fails.
- Discipline: Control for this activity: Test interlocks and the restored enclosure and record lamp or configuration changes before production accepts the cabinet.Basis: HSE optical radiation Owner and verification: Release only after competent service and optical-risk owners accept the restored protective functions. Retain verification and unresolved restrictions at handover. Stop / restart decision: Keep the task on hold until required reinstatement evidence and unresolved defects are accepted by the responsible owner.
For most ordinary light sources, no complex assessment is needed. The work becomes more serious where there are hazardous artificial optical radiation sources, outdoor UV exposure, high-power lasers, UV lamps, welding arcs or equipment that becomes hazardous during maintenance. The assessor should include normal operation, cleaning, alignment, adjustment, fault-finding and foreseeable misuse.
The hierarchy of control still applies. Enclosure, interlocking, remote operation, shielding, restricted access, safe viewing windows, signage and competent maintenance usually come before PPE. For outdoor UV, the control route is work planning: shade, timing, clothing, hats, sunscreen, drinking water, worker information and checking that the controls are realistic for the job.
For the actual task hazard, HSE places elimination first, then substitution, engineering controls, administrative controls and suitable PPE for residual risk. Record why a higher control is not practicable and how the chosen measure is checked in use. HSE hierarchy of controls
| Task hazard | Eliminate, substitute and engineer | Selection, owner and performance check | Failure, stop and direct sources |
|---|---|---|---|
| Welding arc UV reaching the operator or bystander | Eliminate an unnecessary arc process or use a lower-exposure joining method where feasible. Fit opaque welding screens and controlled bays; arrange the task so other workers cannot view the arc. | Welding lead checks screen coverage, gaps, adjacent routes and eyewear/skin protection before striking an arc; verify equipment selection and condition. | Stop welding if the screen is moved, an unprotected person enters or eye/skin symptoms occur; restore separation and review exposure. HSE welding health risks HSE five-level hierarchy |
| UV curing or germicidal lamp during cleaning or maintenance | Eliminate open-lamp access through an enclosed process; choose a lower-exposure method if validated for the task. Interlock doors and isolate energy for maintenance. | Competent engineer commissions enclosure/interlock, checks lamp specification and tests isolation before access; retain measured or manufacturer exposure evidence where needed. | Do not operate with a bypassed interlock, missing cover or unknown replacement lamp; isolate, repair and retest. HSE optical radiation overview HSE optical radiation law |
| Laser beam during alignment or repair | Avoid open-beam alignment where possible; enclose beam path, fit interlocks and remote viewing, then restrict authorised access. | Laser safety lead verifies class, beam path, shutter/interlock and correct wavelength-specific eyewear for residual open-beam work; record task authorisation. | Stop alignment for damaged enclosure, failed interlock, uncertain laser class or wrong eyewear; competent lead revalidates before return. HSE lasers HSE optical radiation law |
| Long outdoor solar UV exposure | Schedule to reduce peak sun where feasible and provide shade; use clothing and brimmed head protection before sunscreen for uncovered skin. | Supervisor checks shade, shift duration, clothing and worker feedback; remind workers to seek clinical review for changing skin lesions. | Change task or provide shelter if shade/clothing cannot be used or a worker develops heat or skin concern; solar UV is not governed by AOR 2010. HSE outdoor workers and sun exposure |
How do time, distance and shielding apply to UV, visible light, infrared and lasers?
Avoid unnecessary exposure, use a less hazardous process where feasible, and enclose or screen the optical source. Control duration and access as supporting measures. Optical radiation is non-ionising: an X-ray shield, a general pair of safety glasses or a point-source distance calculation is not automatically suitable protection.
UV-cabinet hierarchy of controls · Laser control priorities · Compare ionising-radiation controls
Time: manage the actual emission, not an invented safe number of seconds
Longer exposure to an unchanged optical source generally increases radiant energy received. However, wavelength, power, beam characteristics and pulse duration affect the hazard. A powerful laser can injure an eye during a brief exposure; blinking, looking away quickly or a short shift is not an adequate primary safeguard.
For a UV-curing cabinet, plan diagnostics and lamp replacement with the source safely isolated. Restore the enclosure before normal operation. Any necessary energised test requires a competent, source-specific assessment and authorised procedure, not an informal limit on how long someone looks into the cabinet.
Distance: assess the beam path and reflections
Layout and separation can protect other people, but a narrow laser beam can remain hazardous over a substantial distance. Reflections, optical viewing aids and changes in beam direction matter. Do not assume that doubling the distance quarters laser exposure, or mark a universal safe line around every UV lamp.
The competent optical or laser assessment establishes access boundaries for the actual wavelength, power, geometry and operating mode. Keep people outside direct and hazardous reflected beam paths. A change of lamp, laser, focusing optics, reflective workpiece or service condition can invalidate the previous arrangement.
Shielding: use wavelength-appropriate enclosures, screens and viewing protection
Enclose the beam or lamp wherever feasible; use suitable barriers, beam termination and interlocked access where the assessment requires them. Ordinary clear plastic or glass must not be presumed to block every UV, infrared or laser wavelength. Check the specified protective performance of windows, curtains and screens, including damage and gaps.
Where residual exposure requires eye, face or skin protection, select it for the actual source and task. Laser eyewear must suit the wavelength and assessed exposure; a generic dark lens is not a substitute. PPE does not justify a defeated interlock or an exposed beam reaching unprotected people.
Verification and stop points
- The equipment owner confirms source identity, assessed operating modes, competent servicing and the protective functions before release.
- The supervisor checks enclosure condition, viewing windows, access restrictions and the specified interlock tests without bypassing the safeguards.
- Stop for a failed interlock, cracked or missing screen, unknown source output, unexpected reflection or unassessed test arrangement. Isolate through the authorised procedure and seek competent advice before restart.
- Retain the assessment, source specification, maintenance/test results, changes, training and acceptance of the restored enclosure.
In Great Britain, the artificial optical radiation regulations require risks to be eliminated or reduced as low as reasonably practicable and prioritise controls at source. Use the separate Northern Ireland legal route where the work is there; the existing legal-duty section identifies it. HSE optical guidance; HSE laser guidance.
Learning boundary: no safe viewing time, laser hazard distance, optical density or barrier specification is supplied here. The detailed hierarchy remains specific to the worked activity and must be validated for real equipment. Specialist review of this teaching addition remains pending.
Sources and scope for these control principles
- HSE: Optical radiation at work. Scope of UV, visible, infrared and laser hazards. Not a numerical viewing limit or protection specification.
- HSE: Lasers. Embedded sources, enclosure condition and competent authorised maintenance. Not a laser hazard-distance calculation.
- HSE: The law on optical radiation at work. Artificial optical radiation risk elimination/reduction and protection at source. The existing topic legal section retains the NI route.
What should be checked for laser safety?
Laser safety depends on class, beam access, viewing aids, maintenance, interlocks and worker competence.
A low-risk barcode scanner is not the same as an open-beam industrial, medical, research or alignment laser. The assessment should identify the laser class, whether the beam is enclosed, whether viewing aids could increase risk, whether reflective surfaces exist and whether anyone can access the beam during set-up or maintenance.HSE lasers
Maintenance is a recurring failure route. Embedded lasers may be safe during normal use because the casing prevents access. Risk can change when casing is removed, interlocks are defeated, alignment is being done, or untrained people attempt repairs.
| Question | Why it matters | Expected evidence |
|---|---|---|
| What class is the laser? | Class drives the level of risk and controls. | Equipment manual, label and inventory.HSE lasers |
| Is the beam enclosed? | Open beams can create direct and reflected eye risk. | Guarding, enclosure or controlled area check.HSE lasers |
| Can people access the aperture? | Personal access increases injury potential. | Restricted access, authorisation and signage.HSE lasers |
| Are interlocks intact? | Defeated interlocks are a major failure route. | Pre-use checks and maintenance records.HSE lasers |
| Are viewing aids used? | Binoculars or magnifiers can increase eye exposure risk. | Procedure controls and training.HSE lasers |
| Is eyewear matched to wavelength? | Wrong eyewear can give false protection. | PPE specification and issue record.HSE lasers |
Illustrative state change. A normally enclosed embedded laser is held for maintenance. The competent authoriser checks supplier information, wavelength/output, access state, reflections and adjacent workers before any open-beam task. Use the assessed maintenance controls and authorised personnel; hold on uncertain beam access. Return to service requires reinstated enclosure/interlocks and the specified functional test, recorded by the competent equipment owner. Product class alone does not settle maintenance risk.
What is the laser control hierarchy?
Laser controls should prevent access to hazardous beams before relying on eyewear or behaviour.
For learners, the important point is that a laser is not controlled just because people have been told not to look into it. The safest arrangement is to remove access to hazardous radiation altogether, then use engineered enclosure, interlocks and restricted areas so direct, reflected and scattered beams cannot reach the eye or skin during normal work, alignment, cleaning or maintenance.HSE lasers HSE five-level hierarchy
Laser eyewear is a necessary control in some open-beam work, but it is not a magic shield. It must match wavelength, optical density, beam power, exposure duration and task. The wrong eyewear can create dangerous confidence. Where higher-class lasers are used, competent laser safety advice may be needed to confirm classification, local rules, controlled areas, training, emergency arrangements and maintenance controls.
| Control step | What it means in practice | Evidence to expect |
|---|---|---|
| Eliminate the laser source | Use a non-laser method where practicable. If the laser remains, enclosure and remote operation reduce access but belong to engineering controls below elimination. | Procurement or method review showing whether a non-laser method is viable.HSE lasers HSE five-level hierarchy |
| Enclose and interlock | Physically enclose the beam path and prevent operation when covers or doors are open. | Interlock test, enclosure inspection and maintenance record.HSE lasers HSE five-level hierarchy |
| Restrict controlled area | Limit access to trained and authorised people where hazardous emission could be accessible. | Controlled-area plan, signs, access list and local rules.HSE lasers HSE five-level hierarchy |
| Use competent laser safety support | Seek specialist advice for higher-risk, open-beam, alignment, research, medical or public-display work. | Laser safety assessment, appointment or competent review note.HSE lasers HSE five-level hierarchy |
| Select correct eyewear | Choose eyewear for wavelength and optical density, not just style or general brightness. | PPE specification, issue record and user training.HSE lasers HSE five-level hierarchy |
| Train and authorise users | Users understand class, access rules, beam path, reflections, interlocks, eyewear and emergency action. | Training record and authorisation list.HSE lasers HSE five-level hierarchy |
| Maintain warning and emergency arrangements | Signs, lights, shutters, emergency stops and exposure response routes stay current. | Inspection checklist, defect close-out and incident drill record.HSE lasers HSE five-level hierarchy |
Where can optical radiation risk appear in real workplaces?
Optical radiation risk appears in outdoor work, healthcare, education, laboratories, manufacturing, welding and public-facing settings.
Optical radiation workplace examples — part 1 of 2
Read the complete visual as text
- Construction and highways: Typical source: Solar UV, welding arc, lasers for setting out. Practical control focus: Sun planning, welding screens, laser competence and eye protection.HSE outdoor workers and sun exposure HSE welding health risks HSE lasers
- Agriculture and grounds work: Typical source: Long outdoor UV exposure. Practical control focus: Shade, clothing, hats, sunscreen, hydration and scheduling.HSE outdoor workers and sun exposure
- Manufacturing: Typical source: UV curing, infrared heat, laser cutting or marking. Practical control focus: Enclosures, interlocks, extraction where fumes occur and authorised maintenance.HSE optical radiation overview HSE lasers
Optical radiation workplace examples — part 2 of 2
Read the complete visual as text
- Education: Typical source: Classroom laser pointers and science laser demonstrations. Practical control focus: Use suitable devices, prevent deliberate eye exposure and restrict higher-power equipment. HSE outdoor workers and sun exposure HSE welding health risks HSE lasers
- Aesthetic or leisure services: Typical source: Laser or intense pulsed light equipment used by staff. Practical control focus: Train operators, enclose or shield emissions, restrict access and protect worker eyes and skin. HSE outdoor workers and sun exposure HSE welding health risks HSE optical radiation overview HSE lasers
- Laboratories and research: Typical source: Open-beam lasers, UV transilluminators, specialist lamps. Practical control focus: Local rules, shielding, eyewear and supervision.HSE lasers HSE optical radiation overview
In each sector, identify the source and who can enter its exposure path before choosing controls. An outdoor crew needs shade and work planning; a welder needs arc screening for bystanders; a laser user needs equipment-specific access and interlock checks. The same word “UV” does not make those controls interchangeable.
| Sector or task | Typical source | Practical control focus |
|---|---|---|
| Construction and highways | Solar UV, welding arc, lasers for setting out. | Sun planning, welding screens, laser competence and eye protection.HSE outdoor workers and sun exposure HSE welding health risks HSE lasers |
| Agriculture and grounds work | Long outdoor UV exposure. | Shade, clothing, hats, sunscreen, hydration and scheduling.HSE outdoor workers and sun exposure |
| Manufacturing | UV curing, infrared heat, laser cutting or marking. | Enclosures, interlocks, extraction where fumes occur and authorised maintenance.HSE optical radiation overview HSE lasers |
| Education | Classroom laser pointers and science laser demonstrations. | Use suitable devices, prevent deliberate eye exposure and restrict higher-power equipment. HSE outdoor workers and sun exposure HSE welding health risks HSE lasers |
| Aesthetic or leisure services | Laser or intense pulsed light equipment used by staff. | Train operators, enclose or shield emissions, restrict access and protect worker eyes and skin. HSE outdoor workers and sun exposure HSE welding health risks HSE optical radiation overview HSE lasers |
| Laboratories and research | Open-beam lasers, UV transilluminators, specialist lamps. | Local rules, shielding, eyewear and supervision.HSE lasers HSE optical radiation overview |
What happens when a UV cabinet is opened during maintenance?
A UV cabinet that is safe when enclosed can become dangerous when a cover or interlock is bypassed for fault-finding.
A maintenance worker is asked to check a curing lamp after output falls. The normal cabinet stops emission when its door opens, but a temporary bypass is still fitted from an earlier repair. A nearby operator sees light and assumes it is safe; UV injury can occur without an obvious heat warning.HSE optical radiation overview HSE optical radiation law
The supervisor stops the job, isolates the lamp and keeps other workers out. A competent engineer removes the bypass, checks the replacement lamp against the specification, tests the interlock and records the commissioning result before restart. Any suspected eye or skin exposure is referred for appropriate medical assessment. The incident review checks why the bypass was installed, who authorised it and whether other cabinets have the same defect.HSE optical radiation overview HSE optical radiation law
The curing-lamp operator must not treat a bypassed cover as a minor maintenance shortcut. Stop the cycle, isolate the source under the approved method and keep others away from the exposure path. A competent maintainer identifies the lamp and interlock, checks the manufacturer's repair instructions and verifies the guard or interlock after repair; the supervisor releases the cabinet only after the safe operating state has been demonstrated. HSE optical radiation overview
Follow the employer medical-response branch even where an exposure-limit exceedance is identified without symptoms. Urgent clinical care and equipment isolation proceed in parallel.
What evidence shows optical radiation is controlled?
Evidence should prove that hazardous sources are known, access is controlled and protection matches the exposure.
Trace one source from the equipment register to normal use and foreseeable maintenance. Compare the written access rule with observed screens, interlocks, warning arrangements and actual protective equipment. A lamp test record alone will not show that fault-finding can be done without exposing the maintainer or nearby workers. HSE optical radiation law
| Evidence | What it should show | Weakness to challenge |
|---|---|---|
| Source inventory | UV lamps, lasers, intense light and outdoor UV tasks are identified. | Hazards only known by equipment specialists.HSE optical radiation law HSENI artificial optical radiation guidance HSE outdoor workers and sun exposure HSENI risk assessment |
| Risk assessment | Normal use, maintenance, fault-finding and vulnerable workers considered. | Assessment ignores interlock defeat or outdoor work.HSE optical radiation law HSENI artificial optical radiation guidance HSE outdoor workers and sun exposure HSENI risk assessment |
| Local rules or procedure | Authorised users, access, signage, eyewear and emergency action defined. | Generic PPE note with no wavelength information.HSE optical radiation law HSENI artificial optical radiation guidance |
| Maintenance and interlock checks | Enclosures, guards and interlocks remain effective. | Equipment used with damaged casing or bypassed interlock.HSE optical radiation law HSENI artificial optical radiation guidance |
| Training records | Workers understand source, harm mechanism and stop triggers. | Training only says do not look at the light.HSE optical radiation law HSENI artificial optical radiation guidance |
| Incident learning | Eye or skin exposure events trigger control review. | Near misses dismissed because no immediate injury occurred.HSE optical radiation law HSENI artificial optical radiation guidance |
Which legal duties apply to optical radiation?
Use the duty for the work location and the actual people or exposure involved; civil law, workplace rules and clinical advice must be kept distinct.
Artificial sources and sunlight need different legal reasoning. The GB and NI artificial-optical-radiation instruments address hazardous exposure from equipment such as lamps, lasers and welding arcs; outdoor solar ultraviolet risk still requires suitable work planning and control but should not be labelled as an artificial-source exposure. For either route, start with the real source and task before selecting a limit or protective item. Control of Artificial Optical Radiation at Work Regulations 2010HSENI artificial optical radiation guidance
| Jurisdiction | Duty or guidance | Work decision | Direct official source |
|---|---|---|---|
| Great Britain | Artificial optical radiation | Use GB AOR 2010 for hazardous artificial sources; identify source and exposure before selecting controls. | Control of Artificial Optical Radiation at Work Regulations 2010 HSE optical radiation law |
| Northern Ireland | Separate artificial optical radiation route | Use the NI 2010 regulations and HSENI guidance, rather than assuming the GB instrument applies. | HSENI artificial optical radiation guidance |
| Great Britain | Natural solar UV | Plan outdoor work, shade, clothing and breaks; do not apply the artificial-source regulations to sunlight. | HSE outdoor workers and sun exposure |
| Great Britain | Laser task assessment | Class, enclosure, interlocks, maintenance access and eyewear depend on actual beam access and task. | HSE lasers |
| Great Britain | General workplace risk | Review changes, vulnerable workers and maintenance/fault conditions. | HSE risk assessment |
| Northern Ireland | General workplace risk | Apply HSENI risk assessment alongside the distinct NI AOR route. | HSENI risk assessment |
Medical response after artificial optical radiation exposure
In GB, the employer must offer a medical examination when assessment indicates an exposure-limit exceedance or surveillance identifies attributable disease/adverse skin effects. Where assessment identifies adverse skin-health risk, arrange suitable surveillance by a doctor/OH professional and provide the assessment. Maintain the health record, provide worker access and protect medical confidentiality. The examiner advises on follow-up; review assessment and controls and continue appropriate surveillance. GB AOR regulation 6: health surveillance and medical examinations
Provide the clinician with source, wavelength, exposure/access circumstances and assessment evidence without delaying urgent care. Do not wait for symptoms as the sole trigger. Use the separately listed HSENI AOR route for NI over-exposure and follow-up; routine eye surveillance for every laser user is not recommended. The competent owner verifies controls before restart.
How should management arrangements verify controls?
Assign an owner, involve workers, check the control in use and act on failures before returning to routine work.
HSE’s Plan, Do, Check, Act guidance provides the government management route for this topic. Apply it to the actual task, equipment, people and jurisdiction, then keep the verification and corrective-action record. Standards-specific claims are held until their rights and competent review are resolved. HSE Plan, Do, Check, Act
What training and awareness helps?
Training should explain the source, health effect, access rules, PPE limits and stop-work triggers.
Competence must be shown on the actual lamp, laser or welding task: a named assessor records the pre-use check, failed-control response and reassessment trigger.
An operator should identify the actual lamp, arc or laser exposure path and demonstrate the pre-use screen or interlock check. A maintainer should explain the authorised fault-finding method and why a bypassed cover stops work. Outdoor supervisors need a separate solar-UV planning scenario; laser eyewear selection belongs with competent source-specific advice. HSE optical radiation overview
| Level | Who and what | Demonstrated competence | Assessor, record and reassessment | Direct source |
|---|---|---|---|---|
| General awareness | Outdoor, welding and lamp-area workers — Identify UV/laser source, early eye or skin symptoms and reporting route. | Worker can identify the exposure path and correct source-specific stop point. | Supervisor records scenario answer at induction; repeat after new source or task. | HSE optical radiation overview HSE outdoor workers and sun exposure |
| Task operation | Welders, UV-lamp and laser operators — Demonstrate screens, interlocks, isolation, access and residual PPE. | Competent assessor observes pre-use screen/interlock check and response to a failure. | Lead signs source-specific task record; reassess after repair, lamp/laser change or incident. | HSE welding health risks HSE lasers HSE optical radiation law |
| Supervision | Supervisors and maintenance planners — Control adjacent work, contractor access, work permits and changed conditions. | Assessor tests an interlock-fault and bystander-exposure scenario. | Manager records corrective action and refresher; repeat after layout change or near miss. | HSE lasers HSE risk assessment |
| Specialist assessment | Competent optical/laser advisers — Verify source specification, measurement need, enclosure performance and local law. | Peer reviewer checks an exposure assessment and commissioning evidence. | Technical owner retains results and due dates; review after new equipment or abnormal exposure. | HSE optical radiation law HSENI artificial optical radiation guidance |
What do the acronyms and key terms mean?
Acronyms should be understood before they are used in assessments, briefings, audits or learning answers.
Acronyms can exclude newer readers if they are not explained. This section keeps the main terms available at the end of the page so the article stays readable while still supporting learners and audit users.
| Acronym | Meaning | Plain-English use |
|---|---|---|
| UV | Ultraviolet | Short-wavelength optical radiation that can damage skin and eyes. |
| IR | Infrared | Longer-wavelength optical radiation often associated with heat. |
| AOR | Artificial Optical Radiation | Optical radiation generated by equipment rather than the sun. |
| PPE | Personal Protective Equipment | Equipment worn to protect the wearer. |
| RPE | Respiratory Protective Equipment | May be needed where optical processes also generate fume or airborne contaminants. |
Which BuildOut documents support this topic?
Download individual editable BuildOut documents for this topic. Procedures and plans contain completed arrangements; forms, checklists, assessments, RAMS and permits are blank masters. Registers include separate worked examples.
| Document | Purpose and content | Editable download |
|---|---|---|
| Artificial optical radiation and EMF screening assessment BOUK-RA-SPEC-02 · Blank editable master · v1.0 | Screen exposure sources and determine competent assessment and additional controls. | Download DOCX Read preview |
Review and adapt the documents for your organisation, activities and jurisdiction before approval and issue. Open the SHAREms management-system hierarchy to find each document under its parent policy.

Unlock another resource
You have used this month’s two free downloads. Publish a post in your own words to unlock one more resource, or choose SHARE Individual for 10 downloads per month.
You decide whether to share. If you do, use the relevant platform disclosure tools and do not make claims you do not genuinely hold.