SHAREhub
PROCESS SAFETY AWARENESS · SH-PSA-08

Hazard assessment and protective barriers

Hazard assessment and protective barriers — workplace learning illustration
Illustrative workplace context for this course.

Choose the right assessment question, trace credible scenarios and challenge unsupported protection claims.

Free training · Approx. 90–130 minutes

Public teaching and practice are free. Use a free learner account in Moodle for confirmed saves and recorded assessment. A certificate of completion depends on completing the required learning, scoring at least 80% and answering every critical safety question correctly.

Open in the LMS →Try the interactive practice

Your practical case

A fictional transfer review progresses from a vague register entry to specific scenarios. Different methods expose different questions, including a shared dependency and an unsupported budget decision. You choose justified conclusions without inventing data or engineering approval.

Operators, supervisors, maintenance staff, contractors and managers who need independent process-safety awareness; practical roles remain subject to employer competence and authorisation.

Independent SHAREhub process-safety awareness. Selected learning maps to a numbered process-safety syllabus topic; this is not the NEBOSH qualification, approved provision, specialist design instruction or work authorisation. GB guidance is distinguished from corresponding NI requirements; establish applicability for the actual jurisdiction and establishment.

What you will learn

Course outline

Scenario and HIRA foundations

  1. Separate the source from the riskDistinguish a hazard, event and risk statement.
  2. Write a scenario that can be testedConnect cause, event and consequence without claiming certainty.
  3. Use HIRA as a disciplined processFollow assessment from scope to reviewed action.
  4. Treat a rating as an aidRecognise uncertainty and avoid numerical confidence without a basis.

HAZID and what-if questions

  1. Choose HAZID and what-if deliberatelyDistinguish broad identification from focused deviation questions.
  2. Ask a useful what-if questionInclude enough context to examine consequences and controls.
  3. Understand design intent before deviationExplain the purpose of a HAZOP node.

HAZOP and component analysis

  1. Follow a HAZOP deviation throughSeparate causes, consequences, safeguards and actions.
  2. Trace a component failure modeDistinguish failure mode from effect and detection.
  3. Do not count labels as independent layersRecognise the evidence boundary for LOPA and integrity decisions.

Layers, trees and bowties

  1. Choose the direction of the questionDistinguish event-tree and fault-tree reasoning.
  2. Challenge dependency assumptionsUnderstand why combinations need more than multiplication.
  3. Locate the top eventSeparate threats from consequences around loss of control.

Barrier assurance and risk-reduction decisions

  1. Manage barriers beyond the diagramConnect degradation, ownership and assurance.
  2. Understand ALARP without a shortcutDistinguish justified risk reduction from a preferred budget.
  3. Integrate an assessment decisionKeep methods, evidence and action connected.

Practise and test your reasoning

16 lesson decisions and 7 required activities use evidence sorting, matching, sequencing, branching choices and applied checks. Dragging has equivalent labelled controls. The 20-question final assessment requires 80% and every critical answer, after all learning requirements are complete.

Use the linked risk assessment, toolbox talk, policy and assurance resources with their included fictional exercises. Points and module badges help show progress; they do not replace the assessment requirements.

Duration estimates include teaching, activities, checks and assessment. Your pace and retries may vary.

Sources and scope

Independent awareness study · PSM topic 2.2. Independent SHAREhub learning; this is not the NEBOSH qualification.

Knowledge Hub topic coverage

Read the lesson source references

Presentation and model workshop

Use the same course imagery, worked decisions and historical case in a 28-slide teaching companion. Practise classification, compare explained choices and inspect the linked model case.

Open the interactive presentation workshop · Download PowerPoint

This optional companion does not replace the required course activities or final assessment.