Learning sources and topic links
Hazard assessment and protective barriers
Use these links to revisit the Knowledge Hub explanation at the point taught in the course. The course includes its teaching for portable study. Current plant information and authorised site arrangements are still needed for workplace decisions.
Separate the source from the risk
- What is the difference between a hazard and a risk? — Hazard Identification and Risk Assessment Foundations
Write a scenario that can be tested
- How should credible scenarios be described? — Hazard Identification and Risk Assessment Foundations
Use HIRA as a disciplined process
- How should HIRA be completed step by step? — HIRA: Hazard Identification and Risk Assessment
Treat a rating as an aid
- How should risk rating be used sensibly? — HIRA: Hazard Identification and Risk Assessment
Choose HAZID and what-if deliberately
- How are HAZID and what-if analysis different? — HAZID and What-If Analysis
Ask a useful what-if question
- What makes a HAZID scenario useful? — HAZID and What-If Analysis
Understand design intent before deviation
- How should HAZOP nodes and design intent be defined? — HAZOP Studies
Follow a HAZOP deviation through
- How do HAZOP guidewords help the team think? — HAZOP Studies
Trace a component failure mode
- How does FMEA support process safety decisions? — FMEA, LOPA and Safety Integrity Decisions
Do not count labels as independent layers
- How does LOPA test whether protection layers are enough? — FMEA, LOPA and Safety Integrity Decisions
Choose the direction of the question
- When should event trees, fault trees or bowties be used? — Event tree, fault tree and scenario analysis
Challenge dependency assumptions
- Why is common-cause failure so important? — Event tree, fault tree and scenario analysis
Locate the top event
- What are the main parts of a bowtie? — Bowtie analysis and barrier management
Manage barriers beyond the diagram
- What are degradation factors in bowtie analysis? — Bowtie analysis and barrier management
Understand ALARP without a shortcut
- What do SFAIRP and ALARP actually require? — ALARP, Tolerability of Risk and Risk Reduction Decisions
Integrate an assessment decision
- How does barrier thinking strengthen ALARP? — ALARP, Tolerability of Risk and Risk Reduction Decisions
Primary guidance
- HSE: COMAH safety-report assessment criteria
- HSE: Functional safety
- HSE: COMAH2015, proportionality and risk reduction
- HSE: Managing for health and safety, HSG65
Independent awareness study · PSM topic 2.2. Independent awareness learning; no external qualification is awarded.
Technical source index
This index records section identifiers, versions and source-file fingerprints for technical maintenance.