Aerospace manufacturing safety / Assembly access, lifting and foreign-object control
Aerospace manufacturing safety · SH-AERO-06Assembly access, lifting and foreign-object control

Free online training · Approximate learning time: 120–190 minutes · Self-paced
Protect the person and component through every assembly transition.
Full public teaching and readers are free without an account. A free learner account is required for saved LMS progress and recorded assessment. Completion and any course-completion certificate depend on the configured LMS conditions.
Who this course is for
Assembly, tool-control, lifting-interface, maintenance and supervisory teams.
Connect long-component lifting, changing work platforms, fixture stability, tool accountability and the airport receiving boundary. Preserve separate safety, product and access decisions.
Awareness in an original fictional aerospace manufacturing and airport-interface site. GB occupational guidance has separate NI routes; environmental duties depend on the UK nation and permit. This course does not confer engineering, aircraft maintenance, product-release, lifting, rescue, driving or airside authorisation.
Learning outcomes
- Recognise incomplete lifting, access and fixture controls.
- Maintain authentic tool/item discrepancies until authorised reconciliation.
- Coordinate MEWP and assembly operating envelopes.
- Keep product release, physical movement and airport permissions distinct.
Course outline
Plan the complete lift
- Plan the wing lift as a controlled operationRequire a suitable lift plan, supervision and exclusion for the actual long component and its full movement.
- Recheck platforms whenever the component movesTreat access protection as an interface between the current platform and the current assembly position.
Maintain suitable access and fixtures
- Keep fixture stability separate from assembly completionConfirm the actual restraint and load-support state before exposing people to an incomplete fixture.
- Use tool accountability to control foreign objectsKeep missing-tool and loose-item concerns visible until the authorised search and reconciliation evidence is complete.
Control foreign objects
- Coordinate MEWP work with the occupied hangarAssess the platform’s operating envelope, base protection and response alongside surrounding work.
- Reconcile the assembly before its boundary handoverKeep product, transport and airport-interface checks distinct when the component leaves the assembly system.
- Long wing lift and suspended loadStop the lift for an unknown load condition, lost signal or person in the danger area.
- Work platforms around a wingStop work when the platform no longer protects the actual working position.
- Fastener and tool FOD inside an assemblyHold closure and release when a tool, fastener or foreign object remains unaccounted for.
Coordinate occupied-hangar work
- Tail fixture stability and pinch pointsStop when the fixture, locking state or component stability is uncertain.
- MEWP work at height on hangar lightsDo not raise the platform with unresolved ground, overhead, traffic or rescue conditions.
- FOD check before a load crosses the boundaryHold the load when a foreign-object discrepancy or loose item remains unresolved.
Reconcile and hand over
- Close the assembly only when each control has its evidenceCoordinate suspended loads, access, fixtures and foreign-object accountability without exchanging their approvals.
- Take a verified action into the workplaceConnect one actual task to an owner, evidence and a clear release or escalation decision.
Activities, model practice and assessment
Work through 5 required applied activities and 3 model-practice pauses, with explanatory feedback and independent lesson decisions. Complete 6 distinct model mission sequences across those pauses. Use the actual fictional aerospace manufacturing model or its equivalent accessible route to complete the required decision sequences; launching the model alone does not complete practice.
The 20-question assessment requires at least 80% plus every designated critical safety answer. Complete the required activities, practice and lesson checks. Points and badges cannot offset a critical safety error.
Use the LMS for confirmed save/resume and recorded results. Any certificate follows its configured passed-completion and grade conditions.
Open the public interactive practice copy; public practice is separate from the LMS record.
Sources and learning provenance
Original fictional cases are paired with public SHAREhub teaching and structured topic records. Use the applicable jurisdiction and primary guidance for live work.
- HSE: planning and organising lifting operations
- HSE: work at height introduction
- HSE: maintenance of work equipment
- CAA: CAP642 Airside Safety Management
- CAA: CAP790 Airside Driving Permit Scheme
Topic sections, source identities and versions
| Public topic | Chunk and version | Jurisdiction and sources |
|---|---|---|
| load-handling-equipment-and-lifting-operations · planning | load-handling-equipment-and-lifting-operations--planning 2026-10-02-additive-1 | Great Britain, Northern Ireland load-handling-equipment-and-lifting-operations-src-01 |
| working-at-height · hierarchy | working-at-height--hierarchy 4.0 | Great Britain, Northern Ireland source-gb_law, source-ni_law, source-hse_intro, source-hse_assess |
| working-at-height · inspection | working-at-height--inspection 4.0 | Great Britain, Northern Ireland source-gb_law, source-ni_law, source-hse_faq, source-hse_mewp, source-hse_ladder, source-hse_intro |
| work-equipment-lifting-equipment-and-pressure-systems · pre-use | work-equipment-lifting-equipment-and-pressure-systems--pre-use 3.0 | Great Britain, Northern Ireland source-inspection, source-indg229, source-l22, source-puwer_use, source-hseni_devices, source-maintenance |
| machinery-hazards · mechanisms | machinery-hazards--mechanisms 2.0 | Great Britain, Northern Ireland hse-intro, hse-l22 |
| health-and-safety-management-systems · records | health-and-safety-management-systems--records 20261016-activity-led-management-1 | Great Britain, Northern Ireland source-hsg65 |
| safe-systems-of-work · evidence-pack | safe-systems-of-work--evidence-pack 2.1 | safe-systems-of-work--machinery |
| working-at-height · scaffolds-mewps | working-at-height--scaffolds-mewps 4.0 | Great Britain, Northern Ireland source-hse_scaffold, source-hse_faq, source-hse_mewp, source-geis6, source-gb_law, source-ni_law, source-hse_assess, source-indg401 |
| working-at-height · rescue | working-at-height--rescue 4.0 | Great Britain, Northern Ireland source-gb_law, source-ni_law, source-hse_faq, source-geis6 |
| contractor-and-supply-chain-health-and-safety-management · handover-review | contractor-and-supply-chain-health-and-safety-management--handover-review 20261016-letter-review-1 | Great Britain, Northern Ireland source-csc-hse-hsg159, source-csc-hse-cdm, source-csc-ni-maint, source-csc-ni-cdm |
| workplace-transport-and-work-related-driving · assurance | workplace-transport-and-work-related-driving--assurance 4.1 | Great Britain, Northern Ireland source-hse_transport, source-ni_transport |
| load-handling-equipment-and-lifting-operations · worked-example | load-handling-equipment-and-lifting-operations--worked-example 2026-10-02-additive-1 | Great Britain, Northern Ireland load-handling-equipment-and-lifting-operations-src-01 |
| machinery-control-measures · practical-detail | machinery-control-measures--practical-detail 2.0 | Great Britain, Northern Ireland hse-l22, hsg180 |
| health-and-safety-management-systems · pdca-leadership-cycle | health-and-safety-management-systems--pdca-leadership-cycle 20261016-activity-led-management-1 | International, Great Britain, Northern Ireland source-pdca-hse, source-pdca-hsg65, source-pdca-iso45001, source-pdca-tc283, source-pdca-iso9001, source-pdca-iso14001 |
| load-handling-equipment-and-lifting-operations · report-to-task-release | load-handling-equipment-and-lifting-operations--report-to-task-release 2026-10-02-additive-1 | Great Britain load-handling-equipment-and-lifting-operations-src-02, load-handling-equipment-and-lifting-operations-src-01, load-handling-equipment-and-lifting-operations-src-03 |
| working-at-height · planning | working-at-height--planning 4.0 | Great Britain, Northern Ireland source-gb_law, source-ni_law, source-hse_assess, source-indg401, source-l153, source-hse_ladder, source-hse_mewp, source-hse_scaffold |
Course SH-AERO-06 · version 2026.10.20.2. .
Questions about this course
Is this training free?
Full public teaching and readers are free without an account. A free learner account is required for saved LMS progress and recorded assessment. Completion and any course-completion certificate depend on the configured LMS conditions.
How long should I allow?
Approximately 120–190 minutes, including teaching, lesson checks, required activities, model or accessible practice and one assessment attempt. Individual pace, review and retries vary. Save and resume in the LMS.
Can I learn without a 3D-capable browser?
Yes. The complete HTML reader provides the teaching. Required model practice has an equivalent accessible decision route in the interactive course. Use the LMS route for recorded learning.
What is required to pass?
Complete the required learning, activities, practice and lesson decisions. The 20-question final assessment requires at least 80% plus every designated critical safety answer. Points cannot compensate for a critical safety error. Follow the feedback before retrying.
Does this authorise aerospace operations?
Awareness in an original fictional aerospace manufacturing and airport-interface site. GB occupational guidance has separate NI routes; environmental duties depend on the UK nation and permit. This course does not confer engineering, aircraft maintenance, product-release, lifting, rescue, driving or airside authorisation. This independent course does not award an external qualification or replace competent task assessment, practical training or site authorisation.