See what is working and follow improvements through.
Use routine checklists for everyday controls and audits for a deeper review. Record findings, identify actions and retain the evidence needed to check that improvements have worked.
Three lines of defence
Who checks the work, who challenges it and who gives independent assurance? Follow the same loading bay through all three.
1 First line
Routine checklists
Operators and supervisors make proactive “in the line” checks during the shift. Yes scores 1, No scores 0 and N/A is excluded. Repeat completed checklists with the same criteria and N/A pattern to see how standards change.
Is the walkway clear?
Eight Yes answers out of ten applicable checks score 80%. A pallet blocking the walkway still needs action.
Safety advisors, specialists, and risk and assurance personnel test how systems and processes work in practice. They compare the plan with what people say, what they observe on site and what the records show.
Why does it keep happening?
The traffic plan keeps the walkway clear. Staff on the night shift show the auditor where pallets go when the delivery bay fills up.
Internal audit, with specialist support where needed, tests how well both management lines work. It reviews the risk register and controls against applicable legal requirements and recognised good practice, then reports gaps to the board or audit committee.
Did the fix last?
An independent auditor follows the finding from the risk register to the agreed change, then checks whether the walkway stays clear on later shifts.
Plan, Do, Check, Act in this workspaceLeadership, evidence and continual improvement
Where this fits in Plan, Do, Check, Act
Routine checklists and inspections provide operational monitoring. Internal audits give broader, appropriately objective assurance. Both can identify actions, but an action needs an owner, proportionate urgency and an effectiveness check before it is treated as resolved.
Supplied PDCA illustration: leadership connects the cycle. Educational illustration, not an ISO-issued diagram.
Understand the activities and people affected, identify hazards, assess risks and opportunities, establish applicable requirements and set owned OH&S objectives. Risk profiling informs planning as well as implementation.
Evidence to connect: Activity review; risk and legal registers; worker input; objectives, owners, resources and measures of success.
Provide competent people, usable current information and suitable resources. Operate the agreed controls and manage procurement, contractors, change and emergencies with worker involvement.
Evidence to connect: Current policies and procedures; competence evidence; maintenance and operational records; contractor, change and emergency arrangements.
Evaluate reliable monitoring and measurement, relevant compliance evidence, internal audits and management review. Routine checks and independent audit serve different purposes; low accident numbers alone cannot show that controls work.
Evidence to connect: First-line checks; exposure and control-performance information; compliance evaluations; audit samples and management-review decisions.
Respond to incidents, nonconformities and ineffective controls. Protect people, address the causes, assign action and verify effectiveness, then update affected risks, arrangements and competence requirements.
Evidence to connect: Corrective actions with owners and dates; cause analysis; verified changes; revised documents and feedback into the next plan.
Leaders own the effectiveness of the OH&S system, set priorities and provide resources. Context defines what the system must address; worker consultation and participation inform decisions throughout the cycle, not just at the centre.
Evidence to connect: An accurate system scope; policy commitments; clear authority and responsibilities; worker participation; resource and review decisions followed through.
Read the picture as a learning aid, not an official ISO clause diagram. Its risk-profiling label sits under Do; ISO planning also addresses hazards, risks, opportunities and relevant obligations before work begins. Likewise, formal ISO management review is part of performance evaluation, with its decisions feeding subsequent improvement. Activities can span more than one stage.
In the SHAREhub environment: link the risk or objective, its current arrangement, monitoring evidence and any improvement action. Retain a responsible owner, relevant dates and evidence that the change worked; a link between records is not proof of effectiveness.
The cycle can organise a management system, but the diagram, a document library or a completed checklist does not establish conformity, certification or legal compliance. Use the authorised applicable standard and actual workplace evidence. Do not wait for the next audit or annual review to address an ineffective control.
Short checks confirm whether specific controls are in place at the point of work. Frontline supervisors, operators and users carry them out before use, each shift or at an agreed risk-based interval. Observe the actual task, answer Yes or No, and act on defects before continuing.
These checklists have 12 closed questions and two-page offline forms. Repeat the same checks at the same locations to spot deterioration, recurring failures and overdue improvements. They support proactive monitoring; they do not replace specialist inspections or statutory examinations.
Detailed audits: deeper assurance
Audits examine whether arrangements are suitable, implemented and effective. Follow a process through documents, interviews, observations and samples, challenge recurring defects, and test how findings are corrected. Schedule them according to risk, changes and previous performance, rather than treating them as a daily tick-box exercise.
Reviews by safety and risk specialists can support second-line monitoring and challenge. In the formal Three Lines Model, independent internal audit is third-line assurance; independence depends on the reporting and governance arrangements, not the form's title.
Before the audit: legislation and background reading
Loading topic guidance...
Opening workspace...Individual and organisation audits
Loading audit library...
Pen notes and photo markup
Select Pen note beside a finding to write into a large text pad with Android handwriting (Gboard or Samsung Keyboard), iPad Scribble or another supported handwriting keyboard. Check the converted text before adding it. Use Ink / sketch to keep handwriting as image evidence. On an attached photo, select Mark up photo to draw, highlight, add arrows or box an area. A separate marked-up copy keeps the original intact. Notes and images are included in report exports and evidence backups.
Scoring, evidence and scope
Routine checklists: Yes = 1, No = 0; no partial response. Detailed audits: Yes = 2, partial = 1, No = 0. N/A is excluded only with a recorded reason, not counted as a pass. Unanswered questions remain incomplete. Scores are provisional until completion; they do not certify safety or legal compliance. Critical control gaps require immediate escalation regardless of the score.
Check jurisdiction, activity and criteria before use. The libraries are Great Britain baselines, not exhaustive legal checklists. Keep the same wording, criteria and applicability for repeat comparisons. Evidence must be proportionate; do not attach confidential medical records or unnecessary personal details.
Look at the work. Follow the evidence.
Spend less time preparing checks and more time checking controls.
Bring a clear set of questions to the workplace, then spend time observing, listening and testing what is really happening. Turn findings into practical actions and return to see whether those actions have worked.
Choose the right depth
Use a routine checklist for everyday controls or a fuller audit to examine the arrangements behind them.
Record what you actually find
Capture observations and supporting evidence, discuss gaps with the people doing the work and identify priorities.
Close the improvement loop
Agree responsibilities, follow up the actions and retain evidence that the controls are working in practice.
Make your next workplace conversation count.
Create a free account to use the available online audit routes and starter template allowance. Further creation and download allowances depend on your plan. Tailor every check to the activity; a completed checklist does not confirm that work is safe.
Free to join. No card needed. Paid is £17.99 per person per month excluding VAT; VAT is added at checkout. Business services are separate.
External audits and assurance
Keep third-party audit reports and their follow-up actions together. Upload the original report, then record each finding, actionee and deadline. These actions also appear in Findings and follow-up above.
Reports are private to your signed-in account and saved on the server. Upload only reports you are authorised to hold. Reports are not sent to AI.