SHARE Knowledge Hub

Substance Abuse at Work

Substance Abuse at Work explains how employers should manage alcohol, illegal drugs, misused medicines and solvents as health, safety, conduct and support issues. It uses non-stigmatising substance-misuse language while recognising the title commonly used in training. It covers safety-critical work, policy design, worker consultation, signs that may indicate concern, confidential support, fitness for work, testing boundaries, prescription and over-the-counter medicine, incident response, manager do/do not prompts, and evidence standards.

Updated 2026-10-22UK focus

Understanding Substance Abuse at Work

Substance Abuse at Work explains how employers should manage alcohol, illegal drugs, misused medicines and solvents as health, safety, conduct and support issues. It uses non-stigmatising substance-misuse language while recognising the title commonly used in training. It covers safety-critical work, policy design, worker consultation, signs that may indicate concern, confidential support, fitness for work, testing boundaries, prescription and over-the-counter medicine, incident response, manager do/do not prompts, and evidence standards.

Why this matters at work

Start with a written problem and target group, not a menu of commercial tests. Ask whether the issue is work-caused harm, a known safety-critical requirement, access to an established public programme or a general wellbeing aim. Consult workers and occupational health on the barriers they actually face. A clinic referral, better shift pattern or improved exposure control may achieve more than a screening campaign.

Clinical consent should be recorded by the provider. Separate it from the employer's data-processing analysis; the power imbalance makes consent a weak lawful basis for many employment uses. Workers can accept a test while refusing optional employer sharing.

How organisations manage this in practice

Assess hazards, consequences, supervision, error tolerance, shift and fatigue, contractor interfaces, foreseeable medicine effects and support routes. Use design, automation, checks, segregation, competency and fatigue controls first. Testing is one possible assurance layer, not the primary control.

Set out prevention, reporting, safety decisions, support and fair procedures before an incident. Consult workers and representatives. Explain how medicines, contractors and safety critical tasks are handled so workers know when and how to seek help. Consult workers, unions and safety representatives before introduction and material change. Testing should be proportionate to role and purpose, not a visible substitute for supervision, fatigue control or safe staffing. A policy can prohibit impairment and possession while supporting early disclosure and treatment. Define when self-referral protects access to support and when a safety breach still requires investigation; do not promise immunity that cannot be delivered. A policy should state purpose, scope, safety-critical roles, prohibited conduct, alcohol at work events, medicines disclosure route, self-referral, immediate concern process, testing types and triggers, consent, specimen and laboratory standards, medical review, confidentiality, support, discipline, contractors, appeals and review. Avoid vague terms such as suspicion without criteria.

The chapter serves site owners, facilities teams, designers, principal contractors, warehouse and construction managers, fleet teams, hauliers, visiting drivers, workers, safety representatives and Diploma learners. It covers industrial and construction sites, internal routes, lift trucks and mobile plant interfaces, loading, vehicle maintenance, public-road journeys, grey fleet, fatigue and incident learning. Specialist vehicle and road law still needs task-specific interpretation.

Respond to facts and make today’s task safe

When observed behaviour raises a work-safety concern, secure the task, arrange competent cover and appropriate help. A supervisor should not diagnose a cause from appearance or a stereotype.

Employee talking privately with a wellbeing adviser in a UK office. Photorealistic illustration.
Illustrative UK workplace scene. Read the practical checks below for responsibilities, evidence and limits. Download image · Download smaller image
  1. Observe facts

    Record necessary factual observations and task concerns without guessing a substance, diagnosis or personal history. Consider other possible reasons for the behaviour.

  2. Stop unsafe assignment

    Hold affected driving, plant operation or other unsafe work through the agreed process. Do not wait for a test or admission before protecting the task.

  3. Make the task safe

    Use the competent arrangements for equipment, keys, loads and other energy. Avoid creating another hazard while reallocating work.

  4. Competent cover and travel

    Provide suitable cover and prevent unsafe driving; arrange appropriate safe transport and support through the agreed process.

  5. Urgent medical concern

    Obtain appropriate emergency help when the person may need urgent care. Work-policy questions must not delay a necessary medical response.

  6. Private follow-up

    Use the separate support, professional assessment and fair organisational processes, sharing only necessary information. Testing, discipline and diagnosis are not one automatic decision.

Read the complete controls: ERICPD planning prompts

Discipline verifies and sustains all the controls; it is not a separate substitute for them.

Substance Abuse at Work — ERICPD planning prompts
Prompt or levelComplete task-specific example
EliminateKeep the truck parked and remove the unsafe task allocation.
ReduceObtain competent cover or postpone unloading.
IsolateSeparate pedestrians from the affected truck task.
ControlKeep workload pressure from overriding the hold.
PPEPPE cannot compensate for impairment.
DisciplineReview task fitness and sustain confidential support and controls. Read the accompanying source table for the framework distinctions.
Read the complete controls: ESEAP effectiveness order

Compare stronger feasible controls while preserving the actual task, checks and release requirements.

Substance Abuse at Work — ESEAP effectiveness order
Prompt or levelComplete task-specific example
EliminationKeep the truck parked and remove the unsafe task allocation.
SubstitutionNo separate measure is specified in this example.
Engineering controlsUse the assessed physical pedestrian barrier/protected route for the truck interface. The truck remains parked until a competent, fit operator is available.
Administrative controlsObtain competent cover or postpone unloading. Keep workload pressure from overriding the hold. Review task fitness and sustain confidential support and controls.
PPEPPE cannot compensate for impairment. Read the accompanying source table for the framework distinctions.

The pathway is not a diagnostic test or a blanket testing/disciplinary rule. See the related support topic for ongoing help.

How should substance abuse at work be understood?

Alcohol, illicit drugs, medicines and solvents can impair judgement or coordination, especially in driving, machinery and other safety-critical tasks. If there is a credible fitness concern, stop the hazardous activity and arrange safe cover before investigating cause. Speak privately using observable facts, consider health and welfare, and follow a consulted policy. A sign is not a diagnosis; testing needs a justified, proportionate programme with data safeguards. Offer confidential support while applying a fair process to any conduct issue.

The phrase 'substance abuse' is still seen in some training and policy contexts, but non-stigmatising workplace language usually refers to drug and alcohol misuse or substance misuse. The practical issue is whether alcohol, illegal drugs, misused medicines, solvents or other substances could impair judgement, coordination, behaviour, attendance, reliability or safety.

HSE guidance makes clear that employers have duties to protect health, safety and welfare, and that misuse is not the same as dependence. Warning signs such as absence, behaviour change, productivity dips, accidents, near misses or conduct issues can also have other causes such as stress or illness, so managers should avoid jumping to conclusions.

The strongest workplace approach combines a clear policy, worker consultation, safety-critical risk assessment, confidential support, fair conduct process, careful testing boundaries and immediate controls where someone may be unfit for safety-critical work.

ThemeWhat it meansGood practice
Safety-critical workSome tasks create serious risk if judgement or coordination is impaired.Identify driving, plant, machinery, electrical, lifting, confined-space and lone work. HSE safety-critical impairment risk
PolicyWorkers need clear expectations and support routes.Consult, publish, train and apply consistently. HSE confidential support and temporary transfer
SupportPeople may need confidential help without stigma.Signpost EAP, GP, OH or specialist support. HSE confidential support and temporary transfer
Fitness for workManagers may need to remove someone from risk temporarily.Private conversation, task risk review and safe transport home if needed. HSE safety-critical impairment risk
TestingScreening must be carefully justified, consented and accurate.Use within policy and lawful basis; do not treat as the whole control strategy. HSE screening consent, accuracy and limits
Prescription medicinesLegal medicines can still affect safety.For workplace transport, seek GP/pharmacist advice and tell the employer about effects that may compromise safety; other tasks need their own assessment. HSE workplace-transport medication and medical fitness
ConductUnsafe behaviour may need disciplinary process.Separate support from standards and use fair investigation. HSE confidential support and temporary transfer
PrivacyHealth and test information is sensitive.Limit access and record only necessary facts. HSE screening consent, accuracy and limits

Start with HSE safety-critical impairment risk and assess the actual work and nation.

How should safety-critical substance misuse risk be assessed?

Assessment should identify tasks where impairment could cause serious harm, then define prevention, reporting, support and temporary control routes.

HSE guidance highlights safety-critical examples such as machinery, electrical equipment, ladders, driving and heavy lifting equipment. The assessment should also consider plant operation, work at height, confined spaces, hot work, line breaking, lone work, supervision of critical tasks, emergency response and work with the public.

The key is to build a fair decision route before a crisis happens. If a worker appears impaired, discloses a problem, fails a test, reports medication side effects or is involved in an incident, managers should know how to protect people, preserve dignity, access support and record decisions.

QuestionWhy it mattersControl decision
What task is safety-critical?Impairment could harm worker, colleagues, public or environment.Identify and list role/task triggers.
What substances are relevant?Alcohol, illegal drugs, medicine or solvents may have different routes.Policy and assessment scope.
How could concern arise?Disclosure, observation, incident, near miss, test or medication change.Clear reporting and manager route.
What immediate control is needed?Continuing work may be unsafe.Remove from task, supervise and arrange safe support.
What support is available?Misuse may involve health, dependency, stress or crisis.Confidential signposting and OH/GP/EAP route.
What conduct process applies?Unsafe behaviour may breach policy.Fair investigation separate from medical support.
What records are needed?Evidence must protect privacy and support decisions.Record facts, actions, review and access controls.

Use HSE safety-critical impairment risk and HSE consulted drug/alcohol policy for assessed tasks, policy and referral; the decision fields are local prompts.

HSE workplace-transport medication and medical fitness covers prescribed/over-the-counter medicines, GP/pharmacist advice and safety-relevant adverse effects in workplace transport. For other critical work obtain clinical advice and assess the actual duties; a medicine’s legal status does not establish fitness. Managers do not change medication.

How should a manager respond when impairment is suspected?

The manager should protect safety, speak privately, avoid assumptions, use policy and arrange support or escalation.

Forklift driver before unloading

Task material and setting: A forklift driver arrives late and unsteady, with an alcohol smell, before unloading beside pedestrians.

People and prerequisites: Driver, supervisor and trained cover; parked truck, pedestrian separation and private meeting room.

Before: Do not assign the truck; move the person away from the task and secure unloading.

During: State the observed signs without alleging dependence; ask about fitness and immediate welfare; arrange safe cover and transport.

Hold or stop: Do not let the person drive or treat an instant test as a diagnosis. Seek urgent clinical help for acute illness or danger.

Completion and hand back: Follow the consulted policy and proportionate testing route if applicable; offer support and review fitness before return to safety-critical work.

Evidence: Factual observations, action/time, policy route, limited confidential records and follow-up owner.

HSE safety-critical impairment risk

A forklift driver arrives late, smells of alcohol, appears unsteady and is due to unload a delivery near pedestrians. A weak response is to ignore it because the shift is short staffed, or to publicly accuse the worker.

A stronger response removes the driver from the safety-critical task, has two managers speak privately where possible, records observable facts, follows policy, arranges safe transport if needed, considers testing only if policy and legal/practical conditions are met, and signposts confidential support. The delivery is delayed or reassigned because safety-critical work is not negotiable.

Decision pointWeak responseStronger response
Immediate safetyLet worker continue because workload is high.Remove from forklift task and make area safe.
ConversationAccuse them in front of colleagues.Private, factual discussion about observed concern.
EvidenceRecord rumours.Record observable facts, time, witnesses and actions.
TestingDemand a test with no policy basis.Follow consulted policy, consent and reliable testing route.
SupportTreat only as misconduct.Offer support route while maintaining safety standards.
Follow-upForget after shift ends.Review policy, supervision, staffing and incident learning.

Check immediate health and welfare before considering routine travel home. Non-specific signs can reflect illness, medication or other causes; do not assume intoxication. In immediate danger use 999 and follow emergency advice, remaining with the person if safe. Other urgent illness needs prompt clinical help; an EAP appointment or taxi is not emergency care. Arranging cover and safe travel are local implementation choices around HSE safety-critical impairment risk and HSE confidential help and temporary transfer.

The table describes this shift decision; HSE safety-critical impairment risk supports temporary risk control and HSE confidential help and temporary transfer the support route.

What should a drug and alcohol policy contain?

A good policy explains expectations, safety-critical controls, support, testing, privacy, conduct and review.

Policy quality matters because managers need fair, consistent decisions under pressure. A vague statement saying workers must not be under the influence is not enough for safety-critical environments.

The policy should be developed with worker consultation, explained during induction and refreshed for managers. It should cover alcohol, illegal drugs, misused medicines, prescription and over-the-counter medicine, solvents, support routes, testing rules and what happens when concern is raised.

Policy elementWhat it should coverWhy it matters
PurposeHealth, safety, welfare, support and conduct.Avoids purely punitive framing. HSE confidential support and temporary transfer
ScopeEmployees, contractors, visitors, safety-critical roles and work events.Prevents gaps and unfair application. HSE consulted drug/alcohol policy
ExpectationsFitness for work, reporting side effects and no unsafe work.Makes standards clear. HSE consulted drug/alcohol policy
Safety-critical tasksDriving, plant, machinery, electrical work, ladders, lifting and high-risk tasks.Targets serious risk. HSE consulted drug/alcohol policy
SupportConfidential help, self-referral, EAP, GP, OH and specialist services.Encourages early disclosure. HSE confidential support and temporary transfer
TestingWhen testing may occur, consent, accuracy and what results mean.Protects fairness and legality. HSE screening consent, accuracy and limits
MedicationHow workers report safety-relevant side effects without diagnosis detail.Controls legal medicine risks. HSE consulted drug/alcohol policy
ConfidentialityWho sees information and how records are protected.Protects trust and UK GDPR principles. HSE consulted drug/alcohol policy
ConductConsequences for unsafe work, refusal and policy breach.Maintains standards. HSE consulted drug/alcohol policy
ReviewIncident, near miss, worker feedback and legal update triggers.Keeps policy alive. HSE consulted drug/alcohol policy

What are the boundaries around screening and testing?

Testing can support a policy in some roles, but it is not a complete control strategy and must be handled carefully.

HSE guidance warns that screening by itself will not solve drug and alcohol problems. Testing needs a clear purpose, consulted policy, legal basis, consent, reliable process, accurate analysis, privacy controls, fairness and a plan for what happens with results.

Testing should not replace supervision, workload planning, safety-critical risk assessment, support, incident investigation or fair conduct management. A negative test does not prove a person is fit for every task, and a positive or refused test must be handled through the agreed policy rather than manager improvisation.

QuestionGood answerRisk if weak
Why test?To manage identified safety-critical risk within policy.Testing becomes intrusive or symbolic. HSE screening consent, accuracy and limits
Who is covered?Roles and circumstances are defined and justified.Inconsistent or discriminatory application. HSE screening consent, accuracy and limits
Is consent addressed?Consent and consequences are explained in policy.Legal and employment challenge. HSE screening consent, accuracy and limits
Is testing reliable?Sample, chain of custody and analysis are competent.False confidence or unfair outcome. HSE screening consent, accuracy and limits
What happens next?Support, safety control and conduct route are clear.Managers improvise. HSE screening consent, accuracy and limits
How is data protected?Results are restricted and retained only as needed.Privacy breach and loss of trust. HSE screening consent, accuracy and limits

HSE screening consent and accurate analysis requires consent to screening and accurate sample handling/analysis; a worker cannot be forced to take a test. Consent to provide a sample and the lawful basis for processing health results are separate decisions. Do not assume employment consent supplies Articles 6/9 requirements. Explain purpose, limits, access, retention and the applicable refusal/contested-result process before testing; competent review must consider confirmation and medication confounding before any consequential decision. A screening result is not a diagnosis, cause of an incident or complete fitness assessment.

Before introducing testing, the accountable privacy owner must connect the proposal to a DPIA and any required policy documentation: task-specific risk, less intrusive alternatives, justified selection, capability/detection period, competent interpretation, data flows/access/retention and confirmation/contest process. Sample consent is not the same as the lawful basis for health-data processing; a safety-critical subset does not justify testing every office worker.

Which safety-critical roles need clearer substance-misuse controls?

Safety-critical roles need role-specific impairment controls because a short lapse in judgement, coordination or alertness can create serious harm.

HSE guidance highlights safety-critical tasks such as machinery use, electrical equipment, ladders, driving and heavy lifting equipment. In practice, organisations should map the roles where impairment could affect other people, major hazards, emergency response or critical supervision.

The control is not simply testing. Good control means role mapping, induction, self-reporting routes, private manager action, temporary task removal, support, policy consistency, contractor rules and review after incidents or near misses.

RoleWhy impairment mattersControl standard
Plant operatorSlower reaction or poor judgement can strike pedestrians, structures or services.Pre-use fitness expectation, supervisor observation and task removal route.
Driver or mobile workerImpairment can affect public roads, site movement and lone-worker recovery.Driving policy, medication side-effect reporting and safe transport plan.
Scaffolder or work-at-height workerBalance, coordination and decision-making affect fall and dropped-object risk.Pre-start check, supervisor challenge and no work at height if concern remains.
Confined-space attendantThe role depends on vigilance, communication and emergency escalation.Fitness check, no lone critical duty and rescue-plan competence.
Lifting supervisor or slinger-signallerCommunication errors can place people under suspended loads.Lift-plan role competence, stop-work authority and second-person challenge.
Electrical workerImpairment can affect isolation discipline and live-work judgement.Isolation verification, permit control and immediate pause if concern arises.
Lone workerImpairment may delay help and affect travel or emergency decisions.Check-in, welfare escalation and safe return-home arrangement.
SupervisorPoor judgement can allow unsafe work to continue across a whole team.Manager escalation route, deputy cover and factual decision record.

Transfer the forklift case to a supervisor: they may not drive a truck but their decisions can expose the whole crew. Arrange competent deputy cover for critical authorisations and review the actual role, medication effects and work conditions privately. A negative test or a next-shift return does not automatically establish fitness. HSE safety-critical impairment risk.

These role controls illustrate HSE safety-critical impairment risk. Define critical tasks, cover and authority for the actual work.

How should support and discipline be balanced?

Support should be offered early, but unsafe behaviour and policy breaches still need fair management.

Substance misuse can involve dependency, mental health, stress, trauma, social factors, medication or personal crisis. A supportive workplace encourages people to seek help before risk escalates. That is different from tolerating unsafe work.

The mature approach is both compassionate and clear. If someone seeks help before an incident, temporary transfer, adjusted duties or OH support may be appropriate. If someone works while impaired, drives, operates plant or breaches policy, the organisation still needs to protect others and may need a fair conduct process.

ScenarioSupportive responseAccountability boundary
Worker self-discloses alcohol problem before shiftRemove from safety-critical work, signpost support and agree plan.Clear expectation not to work impaired. HSE confidential support and temporary transfer
Prescription medication causes drowsinessPrivate task review and pharmacist/GP/OH advice.Worker must report safety-relevant side effects. For driving: HSE transport medicine/fitness advice. Other critical-task decisions need local risk assessment and clinical advice.
Near miss after suspected impairmentMake safe and offer support route.Investigate facts and apply policy. HSE confidential support and temporary transfer
Refusal of test where policy appliesExplain process and allow representation as policy states.May become disciplinary issue. HSE screening consent, accuracy and limits
Contractor appears impairedStop work and inform contractor management.Site access and contract rules apply. HSE confidential support and temporary transfer
Stress and increased drinking signsSupportive conversation and signposting.Do not diagnose or ignore safety risk. HSE confidential support and temporary transfer

A policy may provide a fair conduct process for an established breach or refusal where there are good grounds for testing; neither automatically proves misuse or warrants dismissal. Use competent HR/legal advice for the actual employment jurisdiction and evidence. HSE screening consent and accurate analysis; HSE confidential help and temporary transfer.

What should managers do when impairment is suspected?

Managers should make the work safe, hold a private factual conversation, use support routes and follow fair process.

The first decision is safety, not blame. If a worker may be impaired in a safety-critical task, the manager should pause the task, remove the person from risk and make sure the workplace remains safe.

The second decision is fairness. Managers should use observable facts, involve a second manager or HR support where policy requires, avoid public confrontation, arrange safe transport where needed, record only relevant facts, signpost support, and investigate through the agreed policy rather than improvising.

StepManager actionRecord or evidence
Make safeRemove the worker from driving, plant, machinery, electrical, lifting or other safety-critical task.Task paused and immediate risk controlled. HSE safety-critical impairment risk
Private conversationSpeak calmly away from the work area and explain the observable concern.Facts observed, time and witnesses if relevant. HSE safety-critical impairment risk
Second supportInvolve another manager, HR, security or first-aider if policy or welfare risk requires.Named people involved and reason. HSE confidential support and temporary transfer
Safe welfareConsider whether the person is fit to travel alone and arrange safe transport if needed.Welfare action without unnecessary medical detail. HSE safety-critical impairment risk
Policy routeFollow drug/alcohol/fitness policy, including testing only where policy, consent and process allow.Policy step followed. HSE screening consent, accuracy and limits
Support routeSignpost GP, OH, EAP or specialist support where appropriate.Support offered and privacy protected. HSE confidential support and temporary transfer
Fair investigationInvestigate incident, near miss or conduct issue using evidence, not assumptions.Investigation and outcome record. HSE safety-critical impairment risk
Learning reviewReview fatigue, workload, supervision, culture, contractor control or event factors.Actions and assurance review. HSE safety-critical impairment risk

How can the hierarchy of controls reduce workplace risks associated with substance misuse?

Address work-created hazards at source, then agree proportionate task controls and personal support.

For substance abuse at work, assess the work itself: staffing, scheduling, exposure, equipment or interpersonal conditions as applicable. Remove or reduce hazards where possible, then agree practical procedures and review whether they work. A personal health condition calls for clinical advice and suitable work adjustments, not a generic control or diagnosis by a manager. HSE hierarchy of controls

Document who will act, what triggers a pause or referral, and when the arrangement will be reviewed. Apply the correct GB or NI duties and site instructions.

For the unloading case, keep the truck parked, remove the credible unsafe task allocation, separate pedestrians and obtain competent cover or postpone unloading. Keep workload pressure from overriding the hold; review the actual fitness before critical work resumes. HSE safety-critical impairment risk; HSE confidential help and temporary transfer. The hierarchy controls work risk; it does not mean eliminating a worker or prescribing treatment. PPE cannot compensate for impairment. ERICPD is an illustrative teaching aid.

When should substance misuse concerns trigger immediate action?

Immediate action is needed where impairment may affect safety-critical work, behaviour is unsafe, an incident has occurred or a worker requests urgent help.

Managers should act on observable facts, not gossip. Smell, unsteadiness, slurred speech, confusion, aggression, near misses, admission of use or medication side effects can require temporary removal from risk, but the conversation should stay private and respectful.

If a worker appears acutely unwell, at risk of harm, in crisis or unsafe to travel alone, managers should use emergency, medical or welfare routes rather than treating it only as conduct.

TriggerImmediate actionFollow-up
Possible impairment in safety-critical taskRemove from task and make work safe.Policy, support and investigation route. HSE confidential support and temporary transfer
Worker self-discloses before workThank them, protect safety and discuss support.Temporary adjustment and review. HSE confidential support and temporary transfer
Medication side effectReview task risk privately.GP/pharmacist/OH advice if needed. For driving: HSE transport medicine/fitness advice. Other critical-task decisions need local risk assessment and clinical advice.
Incident or near missMake safe, record facts and preserve evidence.Investigation and policy review. HSE consulted drug/alcohol policy
Aggression or unsafe behaviourProtect others and get support.HR/security/police if needed. HSE confidential support and temporary transfer
Crisis or self-harm concernIf immediate danger, call 999; stay with the person if safe and arrange emergency support.For other urgent distress use the relevant local crisis route; keep only necessary confidential records. UK 999 and 112 emergency numbers; NI emergency route

nidirect NI mental-health emergency routes distinguishes immediate danger from urgent care-plan/GP/out-of-hours or crisis-team access in NI; other nations have local pathways. Routine OH/EAP and a conduct investigation must not delay urgent help. Stay with the person only where it is safe to do so.

Where do substance misuse policies commonly fail?

They fail when they are punitive only, vague, inconsistently applied, intrusive or disconnected from safety-critical risk.

A poor policy waits for a major incident, then reacts harshly. A good policy encourages early help, controls safety-critical risk, treats people fairly and keeps personal information confidential.

Managers need training because decisions are often made under pressure: short staffing, production deadlines, conflict, customer-facing work or contractor interfaces.

Failure or weak practiceHow it developsWhat good looks like
No safety-critical mappingSame rule for every role with no risk logic.Task-based assessment. HSE consulted drug/alcohol policy
Testing-only mindsetBelief that testing solves the problem.Policy, support, supervision and risk control. HSE screening consent, accuracy and limits
StigmaPeople hide problems until incidents happen.Confidential support and early reporting. HSE confidential support and temporary transfer
Privacy breachResults or concerns shared widely.Restricted records and manager training. HSE consulted drug/alcohol policy
Inconsistent actionPopular workers treated differently.Clear policy and audit. HSE consulted drug/alcohol policy
Medication blind spotLegal medicines ignored.Side-effect reporting and task review. For driving: HSE transport medicine/fitness advice. Other critical-task decisions need local risk assessment and clinical advice.
No contractor routeContractors unclear on expectations.Contractor induction and contract clauses. HSE consulted drug/alcohol policy

What evidence shows substance misuse risk is controlled?

Good evidence shows that controls are planned, used, checked, corrected and reviewed.

Evidence should match the harm and task. Check whether safety and support arrangements work in practice, protect private information and correct gaps promptly.

Evidence itemWhat it should showAssurance question
PolicyScope, safety-critical roles, support, testing, privacy and conduct.Is it consulted and current?
Risk assessmentSafety-critical tasks and impairment consequences.Are high-risk roles mapped?
Training recordsManager and worker understanding of policy and support.Can managers apply it?
Support routesEAP, GP, OH or specialist help signposting.Are routes trusted and known?
Incident recordsObservable facts, decisions, support and action.Are records factual and confidential?
Testing governanceConsent, procedure, chain of custody and data controls.Is testing fair and reliable?
ReviewNear misses, policy cases and worker feedback.Does learning improve controls?

Adapt the evidence items to the actual work and verify controls, not merely completed forms. Protect personal information and record corrections.

How should substance abuse at work be assured?

Assurance should test whether controls work in practice, not whether the page or procedure exists.

Assurance should include frontline checks, manager review and periodic independent sampling where risk warrants it. The purpose is to find weak signals early, close actions properly and update the risk assessment when work changes.

Assurance levelWhat to checkWhat good looks like
FrontlineManagers know immediate action and support routes.Safety-critical work is paused when needed.
HR/HSE reviewPolicy application, privacy and action quality.Cases are fair and risk-led.
Safety-critical ownerRole mapping and temporary transfer arrangements.High-risk tasks are protected.
AuditTesting governance and confidential records sampled.Data and process are controlled.
LeadershipTrends, resources and culture reviewed.Support and standards are both visible.

Sampling and review levels are local choices; check how safety and support work in practice and correct failed arrangements.

How should management check this work?

Use a defined plan, carry out the controls, check performance and correct what does not work.

For substance abuse at work, assign a competent owner to set the work controls, check their use and review them after change, failure or new evidence. HSE managing health and safety

A management-system label or certificate is not approval of a site limit, procedure or individual work decision. Apply GB and NI duties to the correct location.

What training and competence are needed?

Demonstrate the decision each role must make in its actual task, including when to stop and seek specialist advice.

These assessment methods are illustrative SHARE implementation choices; the linked guidance supports the subject matter, not a prescribed training format.

RolePractice to demonstrateAssessor and methodEvidenceReassess when
DriversSelf-report when unfit; do not start safety-critical driving.Transport lead observes scenario.Fitness decision.Role or medication change. HSE safety-critical impairment risk
SupervisorsStop work and record facts without diagnosis.Manager role play.Response note.Suspected impairment. HSE drug/alcohol workplace approach
ManagersApply policy, support and fair process.HR reviews scenario.Decision trail.Policy change. HSE consulted drug/alcohol policy
HR/privacyCheck proportionality, confidentiality and testing safeguards.Privacy peer review.Impact record.Testing proposal. UK GDPR Article 5
LeadersResource cover and review trends without stigma.Assurance review.Action closure.Recurring event. HSE GB drug/alcohol safety law

What do the acronyms and key terms mean?

Acronyms should be understood before they are used in assessments, briefings, audits or learning answers.

Acronyms can exclude newer readers if they are not explained. This section keeps the main terms available at the end of the page so the article stays readable while still supporting learners and audit users.

AcronymMeaningPlain-English use
EAPEmployee Assistance ProgrammeConfidential support service offered by some employers.
HSEHealth and Safety ExecutiveGreat Britain regulator and official guidance source.
HSWAHealth and Safety at Work etc. Act 1974Primary GB health and safety legislation; NI has a separate Order.
MHSWRManagement of Health and Safety at Work Regulations 1999Regulations requiring risk assessment, arrangements, competent advice and cooperation.
OHOccupational HealthCompetent clinical advice route focused on work and health.
UK GDPRUK General Data Protection RegulationUK data protection law framework relevant to worker health information.
ERICPDEliminate, Reduce, Isolate, Control, PPE, DisciplineTeaching prompt; sustain and check controls.