CWF-PRO-COMAH · Completed fictional example · Owner role: Process safety and COMAH lead
Major accident prevention and proportionate safety management procedure
Crownway Fuels Ltd. CWF-PRO-COMAH. Version 1.0. Prepared 10 November 2026.
COMPLETED FICTIONAL ARRANGEMENT. This Crownway example supports adaptation and learning. It represents no actual company issue, site approval, signature or completed operational evidence.
Explain who does what, in what sequence, the control rationale, evidence, escalation and safe restart conditions.
Scope and responsibility
BULK. Apply to the requested lower-tier scenario only; verify inventory, configuration and jurisdiction. Ten English petrol/diesel forecourts and convenience shops, HQ and mobile support. The additional bulk establishment is a separate illustrative scenario. Inventory, regulatory applicability, permissions and site-specific acceptance are unresolved.
| Responsible role | Required action |
| Process safety and COMAH lead | Own the arrangement, its current scope and escalation. |
| Site manager and shift supervisor | Verify worksite conditions, coordination, briefing and authorised limits. |
| Engineering and competent specialists | Resolve technical uncertainties, verify protection and retain acceptance evidence. |
| Workers and contractor performing authority | Check the agreed method, report change, stop loss of control and provide safe handback. |
Information before release
Review current site and equipment information, assessments, permissions, competence, contractor interfaces and emergency readiness. The branch records identify the detailed evidence fields. Missing technical values are resolved from competent site information; do not copy values from teaching models.
Preparation and operation
1 Prepare the activity
For an establishment found in scope, the operator identifies major-accident scenarios affecting people and the environment, including domino and common-cause effects. The board sets prevention commitments and provides competent resources.
2 Carry out and control the work
Implement the MAPP through proportionate arrangements for organisation, hazard evaluation, operating control, change, emergencies, monitoring, audit and review. Keep notification and public-information duties distinct from the additional upper-tier safety-report and emergency-plan duties.
Control rationale
A low-frequency release, fire or explosion can harm many people and the environment even when everyday injury rates look good.
Stop escalation and return
Suspend the affected activity when a required major-accident barrier is unavailable without an approved, time-limited safe alternative; unresolved risk is escalated to the site accountable manager and board.
The person controlling the activity makes it safe and informs the site manager. The relevant competent specialist verifies the failed or uncertain safeguard. Operations authorises any restart separately after technical acceptance, applicable permissions, work coordination and a fresh briefing. Record all continuing restrictions.
Verification and follow through
Challenge a representative loss-of-containment scenario from initiating event through every claimed barrier. Trace owners, performance criteria, independence, tests and impairment response. A low personal-injury rate does not demonstrate major-accident control.
Worked decision
A proposed independent overfill trip shares an unverified power supply with the normal level instrument. Engineering records the dependency and holds acceptance of the independent-protection claim. The scenario stays open pending competent evaluation and tested design evidence.
This invented case illustrates a decision and any continuing hold. It is not evidence that Crownway has completed an inspection, test, exposure evaluation or regulatory submission.
Connected documents
| Reference | Use in this branch |
| CWF-PLN-COMAH-01 | Lower tier COMAH MAPP and SMS implementation plan (Plan) |
| CWF-REG-COMAH-01 | Major accident hazard and scenario register (Register) |
| CWF-RA-COMAH-01 | Major accident risk and barrier evaluation (Risk assessment) |
| CWF-REG-COMAH-02 | Safety critical elements and performance standards register (Register) |
| CWF-FRM-COMAH-01 | COMAH notification and public information review record (Form) |
| CWF-AUD-COMAH-01 | MAPP and SMS effectiveness audit (Audit tool) |
| CWF-FRM-COMAH-02 | MAPP five yearly and material change review (Form) |
Retain stable record IDs, actual site or asset, template revision, competent author, date and time, findings, actions, owner, due date and evidence. Set the applicable record-specific retention and access rules before operational use. A review date does not authorise deletion; preserve legal holds.
Guidance and related arrangements
Primary guidance 1
Primary guidance 2
What Process Safety Management Is
Crownway document overview
Primary guidance checked 10 November 2026 for the described arrangements. Linked legal-register entries keep their own review dates and territorial conditions. Guidance, ACOPs, company controls and direct statutory duties are distinct.
Primary references: comah15 | official requirements