Apply the learning
Use these fictional practice sheets. They do not create, sign or approve workplace records.
COSHH and exposure control audit
Sample relevant questions, identify objective evidence and assign an owned corrective action. A completed form alone does not prove control.
- Does the substance inventory include process-generated dust, fumes, vapours and biological agents? Evidence to seek: Sample welding, cutting, cleaning and maintenance tasks as well as purchased products; compare inventory with actual work.
- Are assessments task-specific and based on routes, quantities, frequency and people exposed? Evidence to seek: Compare a representative task with SDS, work methods and bystander exposure; an SDS alone is not a COSHH assessment.
- Do exposure assessments reflect the actual tasks, duration, routes and susceptible groups? Evidence to seek: Review a representative task and the basis of its exposure assessment.
- Are engineering controls maintained and their performance checked where required? Evidence to seek: Sample extraction, enclosure or suppression records and observed performance.
- Are spill and exposure response arrangements appropriate to the substances and accessible during each shift? Evidence to seek: Sample response instructions and equipment; check who is competent to respond.
The live SHAREhub tool may require an account. The included fictional exercise remains available offline and never creates a real workplace record.
Hazardous substances (COSHH)
Identify the task limits, responsibilities and support or escalation route. Compare the arrangement with the fictional case; do not adopt a template without checking the actual workplace.
- A workshop celebrates having no reported cancer cases and delays controlling visible welding fume. Is the absence of cases reassuring enough?
- No. Long latency and incomplete reporting make current cases a poor control measure. Assess and control the exposure and verify prevention now.
- Choose one non-asbestos, non-silica exposure for a competent source-control review.
The live SHAREhub tool may require an account. The included fictional exercise remains available offline and never creates a real workplace record.
Health surveillance follow-through
Select the checks that would establish usable controls during this shift. State who must act if a check fails and what evidence is needed before release.
- Are exposure groups requiring surveillance identified? Evidence to seek: Observe safely against the approved local criterion or check the named record. Yes confirms the whole question; No needs a finding and action; N/A needs a reason. Do not defeat safeguards, open live enclosures or perform an unsafe test.
- Is a competent health provider appointed? Evidence to seek: Observe safely against the approved local criterion or check the named record. Yes confirms the whole question; No needs a finding and action; N/A needs a reason. Do not defeat safeguards, open live enclosures or perform an unsafe test.
The live SHAREhub tool may require an account. The included fictional exercise remains available offline and never creates a real workplace record.
Inhalation of process dust, including silica or wood dust where present
Describe the actual task and exposure, distinguish existing and planned controls, and assign verification before work.
- A workshop celebrates having no reported cancer cases and delays controlling visible welding fume. Is the absence of cases reassuring enough?
- No. Long latency and incomplete reporting make current cases a poor control measure. Assess and control the exposure and verify prevention now.
- Choose one non-asbestos, non-silica exposure for a competent source-control review.
The live SHAREhub tool may require an account. The included fictional exercise remains available offline and never creates a real workplace record.
Optional visual practice and worked application
Use these fictional exercises to compare evidence and rehearse decisions. They do not alter course completion or assessment requirements. You can work through the same choices on paper.
Long-latency harm and today’s wood-dust control: read the evidence
A joinery workshop delays improving capture at a sanding task because no occupational cancer cases have been recorded. Dust spreads during cleaning and the maintenance history is incomplete.
The failure in this example
Absence of recorded disease is being used as a current control measure. Long latency and incomplete reporting do not establish that the release, exposure or protective system is acceptable.
A better arrangement
Assess the actual carcinogenic agents and tasks and reduce exposure through suitable source controls and safe work arrangements. Verify capture, maintenance and cleaning in use; keep proportionate records and competent review.
Worked record: who owns the decision?
The task/equipment owner controls the source and cleaning arrangement; the competent exposure adviser supports assessment, verification and review of the relevant agents.
Match the evidence roles in this task
A joinery workshop delays improving capture at a sanding task because no occupational cancer cases have been recorded. Dust spreads during cleaning and the maintenance history is incomplete.
Place each statement under the evidence role it describes. These roles support one task decision; they are not interchangeable.
- Follow the material, release and route to people during production, maintenance and cleaning. Current exposure evidence. This statement addresses current exposure evidence. Follow the material, release and route to people during production, maintenance and cleaning.
- Verify the actual source-control performance and effective cleaning arrangement. Prevention evidence. This statement addresses prevention evidence. Verify the actual source-control performance and effective cleaning arrangement.
- Disease records have important uses but their absence is not proof of current exposure control. Health outcome record. This statement addresses health outcome record. Disease records have important uses but their absence is not proof of current exposure control.
Long-latency harm and today’s wood-dust control: test the arrangement
Absence of recorded disease is being used as a current control measure. Long latency and incomplete reporting do not establish that the release, exposure or protective system is acceptable. Assess the actual carcinogenic agents and tasks and reduce exposure through suitable source controls and safe work arrangements. Verify capture, maintenance and cleaning in use; keep proportionate records and competent review.
Worked record: evidence to obtain
Material/agent identity, cutting/sanding and cleaning tasks, source-control design/performance, peaks and maintenance, residual protection where required and action closure.
Worked record: decision and owner
Assess the actual carcinogenic agents and tasks and reduce exposure through suitable source controls and safe work arrangements. Verify capture, maintenance and cleaning in use; keep proportionate records and competent review. The task/equipment owner controls the source and cleaning arrangement; the competent exposure adviser supports assessment, verification and review of the relevant agents.
Why the weak assurance fails
Absence of recorded disease is being used as a current control measure. Long latency and incomplete reporting do not establish that the release, exposure or protective system is acceptable.
Choose evidence that supports the review
A joinery workshop delays improving capture at a sanding task because no occupational cancer cases have been recorded. Dust spreads during cleaning and the maintenance history is incomplete. The team is reviewing what can support acceptance.
Select the two statements which support the example’s review. Leave the two unsupported shortcuts unselected.
- The assessment covers sanding and cleaning exposure, including different tasks and peaks. Relevant evidence. This is useful evidence for this example. Material/agent identity, cutting/sanding and cleaning tasks, source-control design/performance, peaks and maintenance, residual protection where required and action closure.
- Capture performance and maintenance/cleaning arrangements are verified against the actual work. Relevant evidence. This is useful evidence for this example. Material/agent identity, cutting/sanding and cleaning tasks, source-control design/performance, peaks and maintenance, residual protection where required and action closure.
- No recorded cancer cases are used to justify postponing source control. Insufficient evidence. This does not resolve the example’s acceptance gap. Absence of recorded disease is being used as a current control measure. Long latency and incomplete reporting do not establish that the release, exposure or protective system is acceptable.
- A favourable general health campaign is accepted instead of controlling the identified carcinogenic exposure. Insufficient evidence. This does not resolve the example’s acceptance gap. Absence of recorded disease is being used as a current control measure. Long latency and incomplete reporting do not establish that the release, exposure or protective system is acceptable.
Long-latency harm and today’s wood-dust control: follow the changed condition
A new material, sanding method or cleaning practice changes the release or defeats capture. Follow the decision route; it supplies learning outcomes, not permission for real work.
A meaningful change
A new material, sanding method or cleaning practice changes the release or defeats capture. Revisit the basis of the affected decision instead of extending an earlier acceptance beyond its scope.
Worked record: what remains on hold?
Absence of recorded disease is being used as a current control measure. Long latency and incomplete reporting do not establish that the release, exposure or protective system is acceptable. The example remains unresolved until the actual agent and exposure tasks have been assessed rather than judged from disease counts.
Worked record: what would support later acceptance?
Material/agent identity, cutting/sanding and cleaning tasks, source-control design/performance, peaks and maintenance, residual protection where required and action closure. The task/equipment owner controls the source and cleaning arrangement; the competent exposure adviser supports assessment, verification and review of the relevant agents.
Follow the changed-condition decision
A joinery workshop delays improving capture at a sanding task because no occupational cancer cases have been recorded. Dust spreads during cleaning and the maintenance history is incomplete. Changed condition: A new material, sanding method or cleaning practice changes the release or defeats capture.
Follow the evidence gates and compare the outcome of an unresolved condition with an established one.
- Has the reviewer established that the actual agent and exposure tasks have been assessed rather than judged from disease counts?
- Yes, the stated basis is established: That resolves this evidence question; check the separate readiness condition next. Next: Has the responsible owner established that suitable source and cleaning controls are operating and their performance has been verified?
- No, the basis remains unresolved: Do not infer acceptance from an incomplete or conflicting basis. Absence of recorded disease is being used as a current control measure. Long latency and incomplete reporting do not establish that the release, exposure or protective system is acceptable. Next: Example outcome: retain the hold point — Assess the actual carcinogenic agents and tasks and reduce exposure through suitable source controls and safe work arrangements. Verify capture, maintenance and cleaning in use; keep proportionate records and competent review.
- Has the responsible owner established that suitable source and cleaning controls are operating and their performance has been verified?
- Yes, the required readiness evidence is established: In this fictional exercise, both evidence gates are established. Real work still follows its own authorised release. Next: Example outcome: record the verified basis for the authorised decision — Record the evidence, owner and limits of this example’s decision. A new material, sanding method or cleaning practice changes the release or defeats capture. is a reason to review it again; the course does not authorise actual work.
- No, readiness or competent cover is still missing: An agreed principle is not a usable arrangement. Resolve the missing condition before affected work proceeds. Next: Example outcome: arrange the missing protection or support — The task/equipment owner controls the source and cleaning arrangement; the competent exposure adviser supports assessment, verification and review of the relevant agents. Re-plan the affected work and obtain evidence that the required readiness condition is met.
- Example outcome: retain the hold point
Assess the actual carcinogenic agents and tasks and reduce exposure through suitable source controls and safe work arrangements. Verify capture, maintenance and cleaning in use; keep proportionate records and competent review.
- Example outcome: arrange the missing protection or support
The task/equipment owner controls the source and cleaning arrangement; the competent exposure adviser supports assessment, verification and review of the relevant agents. Re-plan the affected work and obtain evidence that the required readiness condition is met.
- Example outcome: record the verified basis for the authorised decision
Record the evidence, owner and limits of this example’s decision. A new material, sanding method or cleaning practice changes the release or defeats capture. is a reason to review it again; the course does not authorise actual work.
Occupational exposure-prevention review
Select the COSHH-control review and trace the fictional sanding/cleaning task from material identity to source control, maintenance and verification. Keep health promotion distinct from exposure prevention and medical screening.
Fictional record — task and concern: A joinery workshop delays improving capture at a sanding task because no occupational cancer cases have been recorded. Dust spreads during cleaning and the maintenance history is incomplete.
Fictional record — decision: Assess the actual carcinogenic agents and tasks and reduce exposure through suitable source controls and safe work arrangements. Verify capture, maintenance and cleaning in use; keep proportionate records and competent review.
Fictional record — owner: The task/equipment owner controls the source and cleaning arrangement; the competent exposure adviser supports assessment, verification and review of the relevant agents.
Fictional record — verification and review: Material/agent identity, cutting/sanding and cleaning tasks, source-control design/performance, peaks and maintenance, residual protection where required and action closure. Review trigger: A new material, sanding method or cleaning practice changes the release or defeats capture.
Optional choices save on this browser, separately from recorded course progress. Live tools retain their own access and competent-review requirements.