Occupational cancer prevention beyond asbestos and silica · detailed source study

Optional reference study from the SHAREhub topic pages and selected source records used for this course. The core learning-time estimate excludes this extended reference.

Check the campaign message before it goes out
Check the campaign message before it goes out

Source: cancer-awareness--review-start

Before a campaign is issued, identify the audience and country, check the current NHS programme being described, provide a symptom-help route and decide who answers private enquiries. Do not collect attendance or results as proof of campaign success. The exposure-control owner should separately confirm that the workplace carcinogen controls are working. Compare two messages: “Check the screening invitation and information relevant to your country” supports an informed choice. “Wait for your next screening invitation if you notice a change” wrongly merges screening with symptoms. Use the existing symptom signposting for a concern now; a disclosed diagnosis belongs in Cancer and Work, not a public campaign discussion. No campaign replaces control of silica, asbestos, wood dust or other occupational carcinogens. Illustrative example.

A fictional wellbeing lead prepares a screening reminder while a worker privately asks about a new symptom. Decision. The lead keeps the reminder general and voluntary, uses the existing symptom-help signposting and offers the confidential worker-support route. Evidence to check. Country-specific current programme information, checked wording, private contact and a separate exposure-control owner. Hold or escalation point. Do not publish a universal UK invitation age or ask staff to disclose screening attendance or results. Follow-up. Recheck links when the campaign is reused; review reach and access without retaining individual health disclosures. Read with: NHS lung screening guide · NHS emergency guidance.

Bring this into my business

Source: cancer-awareness--practical-cancer-awareness

These routes serve different purposes. A person with a new concern should not wait for a routine screening invitation, while workplace prevention continues independently. Use the appropriate health-assessment route for a new or persistent change; do not diagnose from a symptom illustration. Use current country-specific screening information and informed choice. Screening is not a substitute for assessment of symptoms. Identify and control the actual exposure-generating task. Keep health enquiries private and give managers only necessary work information. Follow the clinical and urgent-help signposting on this page; a workplace image cannot determine individual cancer risk. Further guidance: HSE: health surveillance. Use a GP or the appropriate NHS service for a personal health concern.

A manager can make time for care, discuss practical work support privately and act on an uncontrolled workplace exposure; they should not interpret symptoms or request screening results. Ask about cancer awareness, workplace campaigns, screening signposting, occupational cancer prevention, confidentiality or manager training. Professional learning Practical learning for managers, wellbeing leads, HR, H&S advisers and worker representatives. Link my operations to SHARE knowledge, SHARE AI Intelligence, wellbeing campaigns, occupational health routes and carcinogen control evidence.

What does cancer awareness mean in a workplace?

Source: cancer-awareness--what-is-it

Cancer awareness in a workplace means helping people understand signs, screening, risk reduction, support routes and occupational exposure prevention. Cancer awareness should be practical and calm. It should help a worker recognise when something is not normal for them, know where to get NHS advice, understand that screening invitations are important, and feel able to ask for support if cancer affects work. Good awareness avoids fear-based messaging. It does not tell people they have cancer, speculate on symptoms or push private tests. It gives simple signposting, explains confidentiality and connects the topic to existing wellbeing, occupational health and health and safety systems. The workplace also has a prevention role where cancer risk comes from work.

That includes identifying carcinogens, assessing exposure routes, reducing exposure at source and checking whether controls still work over time.

What possible cancer signs should workplace awareness cover?

Source: cancer-awareness--signs

Workplace awareness should cover general warning signs and encourage people to seek NHS advice where symptoms are unusual, persistent or worrying. Cancer signs vary and many common symptoms are caused by conditions that are not cancer. That is why workplace awareness should avoid alarmist language and focus on the principle: if a change is unusual for the person, persists, gets worse or causes worry, it should be checked through NHS or GP routes. Helpful awareness is specific enough to be memorable but broad enough not to diagnose.

It can mention lumps, unusual bleeding, unexplained weight loss, persistent pain, skin changes, changes in bowel or bladder habit, coughing blood, persistent cough, swallowing difficulty, breathlessness, mouth ulcers that do not heal, or fatigue that is unusual for the person. Managers should not investigate symptoms. If a worker raises a health concern, the manager can listen, signpost and ask whether anything at work needs short-term support while the worker seeks advice. Coughing up blood needs prompt medical assessment; the NHS emergency guidance says to call 999 or go to A&E for more than a few spots or streaks, or for blood with breathing difficulty, a very fast heartbeat or chest or upper-back pain. Do not delay that action for a workplace discussion.

How should workplaces talk about NHS cancer screening?

Source: cancer-awareness--screening

Workplaces should signpost NHS screening as an informed choice and recognise that screening programmes can differ across UK countries. Screening is aimed at identifying people who may have a higher chance of a health problem so that early treatment or informed decisions can follow. It is not the same as diagnosis and it is not perfect: it can miss disease, find something that needs further tests, or create anxiety. That nuance should be included in good workplace awareness. Cancer-related NHS screening includes cervical, breast and bowel screening. Lung cancer screening is currently available for eligible people in some parts of England, as the NHS lung screening guide explains.

The UK National Screening Committee advises all four UK countries, but each country sets its own screening policy and implementation, so eligibility, timing and local arrangements may differ. Employers should allow reasonable time and flexibility for screening appointments where possible. They should avoid asking for screening results unless there is a specific work need and a lawful, proportionate reason.

How can the ISO 45001 hierarchy of controls reduce silica exposure during masonry drilling?

Source: cancer-awareness--prevention

Health messages can support informed personal choices, while the employer must assess and control cancer-causing work exposures at source. Age, inherited factors and chance are outside an individual’s control, so a campaign must avoid blame. Signpost smoking cessation, alcohol advice, vaccination and sun protection where relevant. A poster cannot replace control of respirable silica, asbestos fibres, wood dust, diesel exhaust or hazardous substances in the actual job. Trace the chain before choosing a measure: a source releases an agent, a task puts it into air or onto skin, a person is exposed, the agent reaches tissue and disease may emerge much later. Check who else may be exposed, including contractors and cleaners.

If an enclosure, extraction or wet method fails, stop the affected work and restore effective control before restarting. Use the HSE hierarchy of controls for the actual exposure: remove or substitute the hazard where possible, use physical or engineering controls, organise work to limit residual risk, and use suitable PPE only where it helps. Assign an owner, check that each control works, and stop the task if a critical control fails. In Northern Ireland, check the applicable local duty and assessment. A maintenance team drills identified masonry in an occupied building. Apply cancer-prevention learning to the dust-generating task, rather than relying on an awareness poster. ERICPD is a planning crossmap. Its prompts do not add a sixth rung or rank Isolate above engineering.

Discipline verifies and sustains every control level. The hierarchy of controls in ISO 45001:2018 comes under Clause 8.1.2 (Eliminating hazards and reducing OH&S risks), which is located within Clause 8 ("Operation"). ESEAP: Elimination, Substitution, Engineering controls, Administrative controls and PPE. Control order: HSE hierarchy of controls and IOSH hierarchy of control guidance. For an office-based campaign, the immediate action may be a credible GP or screening route and a confidential support contact. For a stone-cutting task, the immediate action is the exposure control and stop rule. These routes can run together, but one cannot replace the other.

How should a workplace cancer awareness campaign be planned?

Source: cancer-awareness--workplace-campaigns

A workplace cancer awareness campaign should be accurate, respectful, inclusive, practical and connected to support routes. A useful campaign starts with purpose. The aim may be to improve knowledge of symptoms, increase screening confidence, reduce stigma, support carers, improve manager response, or strengthen occupational cancer controls. Trying to do all of that in one poster usually makes the message weak. Campaigns should be inclusive. Cancer can affect people of different ages, sexes, ethnicities, job roles and literacy levels. Some people may be in treatment, in remission, recently bereaved or caring for someone with cancer, so messaging should avoid dramatic imagery or guilt.

The best campaigns give people a next step: speak to a GP, use NHS screening, contact occupational health, ask HR about adjustments, speak to a manager, use an employee assistance programme, or report uncontrolled carcinogen exposure.

How does occupational exposure lead to cancer?
How does occupational exposure lead to cancer?

Source: cancer-awareness--occupational-cancer

A carcinogen can enter the body during work and damage tissue long before a disease becomes visible; prevention depends on controlling the source and exposure route now. Dust and fibres can be inhaled deep into the lung; some agents can also reach the skin or be swallowed from contaminated hands. Dose, duration, agent and route matter, but an individual’s later cancer usually cannot be attributed from a symptom alone. An exposure concern should trigger a task assessment and control check, while a health concern goes to a GP. Examples help a team recognise a pathway.

Hard-wood dust from machining can reach the nose and sinuses; respirable crystalline silica from cutting stone can reach the lungs; diesel exhaust from idling plant can accumulate in a poorly ventilated loading bay; outdoor ultraviolet radiation damages skin. The exact material, method and local conditions determine the controls. For asbestos or ionising radiation, use the specialist legal and competent-person routes rather than a generic COSHH checklist. Exposure control protects people who may never have symptoms during the job. Where health surveillance is legally indicated, a competent programme supports control assurance; it is not a substitute for reducing exposure or a general cancer-screening test.

How should confidentiality be managed during cancer awareness work?

Source: cancer-awareness--confidentiality

Cancer awareness should protect personal health information and avoid turning campaigns into data-gathering exercises. Awareness activities can accidentally create confidentiality problems. A manager might ask why someone attended a screening appointment, a wellbeing lead might collect too much information in a survey, or a team might speculate after a campaign discussion. These risks should be planned out. The safest approach is to keep awareness data anonymous wherever possible. If individual support is requested, move that into the proper HR, occupational health or management support route with clear privacy boundaries. Worker health information is sensitive. Employers should only collect what they need, explain why, restrict access, keep it secure and retain it for no longer than necessary.

Which GB and Northern Ireland duties shape a campaign and its controls?

Source: cancer-awareness--legal

Keep general health signposting, worker support, privacy and occupational exposure prevention distinct; use the law and regulator for the work location. A campaign itself should be accurate, accessible and voluntary. If a worker asks for help, discuss job impact and reasonable work changes under the applicable equality framework. Store health information only where necessary and with restricted access. If the issue is an occupational carcinogen, the employer must assess and control the exposure; a personal cancer diagnosis alone does not make a GB RIDDOR occupational-cancer report. The Health and Safety at Work etc. Act 1974, Management Regulations 1999, COSHH 2002, Equality Act 2010 and GB RIDDOR 2013 are GB routes.

Northern Ireland has its own Health and Safety at Work (Northern Ireland) Order 1978, Management Regulations 2000, COSHH Regulations (Northern Ireland) 2003 and disability and reporting framework. Check HSENI and the applicable NI text before giving a statutory answer there. Screening programme rules and invitations are also country-specific.

How should cancer awareness appear in risk registers and action plans?

Source: cancer-awareness--risk-register

Cancer awareness should appear as wellbeing, communication and exposure-control actions, not as personal medical information. A cancer awareness campaign does not need a list of who has cancer, who attended screening or who asked a health question. That information should remain private unless the worker asks for support through a proper route. The risk register should capture occupational cancer exposures and campaign actions. For example, a construction business might record silica dust and solar radiation as health risks, while a leisure business records outdoor UV exposure and older-building asbestos disturbance risk. Action plans should show how learning leads to control improvement: better signage, refreshed training, clearer support routes, more effective dust suppression, improved health surveillance or manager guidance.

How could Riverside Leisure Ltd manage cancer awareness?

Source: cancer-awareness--business-example

Riverside Leisure Ltd would manage cancer awareness through calm health signposting, manager training, privacy controls and occupational cancer prevention for outdoor and maintenance work. a fictional leisure, hotel and outdoor activity business with campsites, swimming areas, catering, housekeeping, grounds teams, instructors and maintenance workers Riverside has a mixed workforce, so its cancer awareness activity is deliberately practical. It uses short seasonal campaigns on skin cancer awareness before outdoor summer work, NHS screening reminders in staff wellbeing communications, and manager briefings on how to support a worker who discloses a cancer concern or diagnosis. The wellbeing lead and HR manager agree campaign wording from NHS and GOV.UK sources. They do not ask workers to report screening attendance or results.

If someone asks for support, the line manager offers a private conversation and HR explains how health information will be handled. The H&S adviser connects awareness to occupational exposure control. Grounds and activity staff have ultraviolet radiation controls in the risk register, maintenance workers check the asbestos register before intrusive work, workshop wood dust is controlled by extraction and cleaning, and diesel plant use is reviewed to reduce exhaust exposure in enclosed or semi-enclosed areas. Riverside checks effectiveness through campaign reach, manager confidence checks, anonymised feedback, risk-register reviews, contractor audits, training completion, exposure-control inspections and action close-out. Lessons from absence cases and inspections feed into annual wellbeing and H&S planning.

What should each role learn and demonstrate?

Source: cancer-awareness--training

Training must match the decision a person makes: seek health advice, respond privately, manage an exposure task, or verify that the controls remain effective. General awareness can be short, but people should be able to find the GP route and a confidential workplace contact without interpreting a symptom themselves. Managers need a practised conversation and an adjustment/cover decision. Exposed workers must demonstrate the actual process controls, protection, defect response and stop rule. Reassessment follows a task, control, role or guidance change; no universal cancer-awareness certificate or fixed refresher interval proves competence. Where a team uses a short campaign briefing, check whether staff can act correctly on a realistic situation. Attendance alone is weaker evidence than a demonstrated safe decision.

How does this topic support professional learning?

Source: cancer-awareness--study-development

A useful learner can separate health promotion, individual support and prevention of occupational exposure, then apply the correct evidence to each. For introductory safety study, explain how to signpost a worrying symptom without diagnosis, make screening an informed choice, and turn an exposure concern into a risk assessment. For advanced study, trace a long-latency harm chain from task and route to tissue, then test whether source controls and assurance records match what occurs at work. A manager should practise the private support conversation; a safety adviser should challenge a campaign that leaves a dust or fume source uncontrolled. A strong scenario answer names the country, agent, task, exposed people, control owner, stop point and evidence.

It does not use a generic awareness certificate as proof of safe work.

How can a management system sustain accurate awareness and prevention?

Source: cancer-awareness--management-system

Assign owners for health messages, confidential support and exposure controls, then check that each route works in practice. A campaign should have an approved source, audience, contact route and review trigger. A support case needs a private record and agreed work actions. An occupational exposure risk needs a task owner, effective controls, inspection, maintenance and corrective action. Worker feedback can reveal confusing signposting or controls that fail during ordinary shifts. HSE Managing for health and safety (HSG65) is HSE guidance for Great Britain on managing health and safety using Plan–Do–Check–Act. Use it to plan responsibilities and exposure controls, put them into practice, check their effectiveness and act on failures or changes.

It is regulator guidance, and does not replace the applicable legal duties or provide permission to expose anyone. Management evidence might include an approved campaign message, a de-identified feedback trend, a control specification, an extraction test and a closed corrective action. Check the real task and people affected, not merely whether a document exists.

What are the warning signs that cancer awareness is being managed poorly?

Source: cancer-awareness--warning-signs

Warning signs include fear-based campaigns, poor privacy, weak signposting, private screening pressure and uncontrolled carcinogen exposure. Awareness can do harm if it is sensational, intrusive or disconnected from real support. People may avoid disclosure if they think managers will gossip, record excessive health details or treat them as less capable. A separate warning sign is an organisation that runs wellbeing campaigns while leaving occupational cancer exposures uncontrolled. Workers quickly notice the contradiction if posters encourage screening while site work still creates dust, fumes, fibres or UV exposure without proper controls. If a campaign has no GP or support contact, add one before distribution. If it pressures people into private tests or sharing results, stop that practice and check the screening and privacy route.

Review de-identified feedback and the exposure-control action log after the campaign; a one-off poster and attendance count cannot show whether people are safer.

Capture dust before it reaches the breathing zone
Capture dust before it reaches the breathing zone

Source: wood-dust--practical-interim-wood-dust

Health exposure and collector fire or explosion protection need separate assessment. The presence of a hood does not establish effective capture. Assess the actual material, guarded task, dust release and people exposed, including escape into the breathing zone. A competent LEV assessment checks hood, duct, cleaner, collector and discharge against accepted task-specific performance evidence. The appropriate fire or DSEAR owner checks ignition, accumulation and protection; good capture alone does not establish collector safety. Restrict affected work, obtain competent correction and verify before hand-back. A workshop photo is context, not proof of running, isolation, guard performance or RPE adequacy. ERICPD is a planning cross-map: Discipline verifies and sustains every control. ESEAP compares effectiveness.

A label does not authorise the task; retain the owner, evidence and stop or change decision.

What should a worker do before making wood dust?

Source: wood-dust--first-actions

Identify the wood, board, coating and contamination; use the assessed lower-dust method; complete the fire and explosion screening; start effective extraction before the tool; don selected, fit-confirmed respiratory protective equipment (RPE) before dust is generated where required; segregate people; and have at least Class M vacuum cleaning or an assessed local exhaust ventilation (LEV) suction-hose alternative ready. Identify the wood, board, coating and contamination; use the assessed lower-dust method; complete the fire and explosion screening; start effective extraction before the tool; don selected, fit-confirmed respiratory protective equipment (RPE) before dust is generated where required; segregate people; and have at least Class M vacuum cleaning or an assessed local exhaust ventilation (LEV) suction-hose alternative ready.

Wood dust is airborne and settled material produced when wood or wood-based boards are cut, machined, sanded or handled. Apply it: Which part of this plan would you check at the workface before authorising the task? Wood dust is airborne and settled material produced when wood or wood-based boards are cut, machined, sanded or handled. Breathing it can cause occupational asthma, and hardwood dust is linked to cancer of the nose; accumulated fine dust can also create a separate fire or explosion hazard. Material/task check, user LEV check, any defect action, cleaning record and supervisor release. Apply it: What evidence would show that the change improves this task, rather than only completing a record?

Start extraction before cutting, keep capture components in position and watch for escape at the cut and operator breathing zone. Stop the saw, follow the planned clearance, vacuum surfaces with suitable equipment, contain waste and leave the LEV and area in their defined condition. Apply it: At which point would you hold this example, and what evidence would allow it to proceed? Machine sanding without effective extraction: Fine dust enters the breathing zone repeatedly; sensitisation and occupational asthma can develop. Hardwood cutting and settled-dust re-suspension: Inhaled hardwood dust can reach the nose and is linked to nasal cancer; sweeping can put fine particles back into air.

Dust deposits in extraction or enclosed handling: An ignition source can ignite a dispersed combustible dust cloud and cause a fire or explosion. Apply it: Who could be exposed, including other trades, cleaners, maintainers and people nearby? Eliminate: Remove a cutting or sanding step by ordering a pre-sized component or using a finish that avoids dry machining. Reduce, including substitution: Trial a lower-dust method or suitable pre-finished material, checking wood species, coating and new hazards. Isolate: Capture dust at the cutting, shaping or sanding source with correctly designed extraction and suitable collection. Control: Limit access to dusty work, organise effective extraction-compatible cleaning and train operators to check controls.

PPE: Where assessment requires respiratory protection in addition to stronger controls, select suitable RPE for the exposure and wearer. Read the full control table for qualifications, ownership and verification. Use the actual task and applicable jurisdiction; existing technical approval remains unchanged. Apply it: Which stronger option can be used here, and who will verify it before accepting the remaining risk? Use the full topic for the decision points, practical examples, detailed control tables and source scope. HSE guidance applies to Great Britain; use HSENI for the Northern Ireland route and the source’s stated jurisdiction. A simplified guide does not change the page’s technical-review or approval status. Apply it: Which official source and full-topic section will you use to resolve the next decision?

Keep one card or the full set for social sharing, team briefings and learning. Each PDF contains one card per page. Read the full topic for explanations, questions and source links. Identify the wood, board, coating and contamination. Identify the wood, board, coating and contamination; use the assessed lower-dust method; complete the fire and explosion screening; start effective extraction before the tool; don selected, fit-confirmed respiratory protective equipment (RPE) before dust is generated where required; segregate people; and have at least Class M vacuum cleaning or an assessed local exhaust ventilation (LEV) suction-hose alternative ready. Wood dust is airborne and settled material produced when wood or wood-based boards are cut, machined, sanded or handled.

Apply it: Which part of this plan would you check at the workface before authorising the task? Use the evidence to improve the actual work arrangement. Wood dust is airborne and settled material produced when wood or wood-based boards are cut, machined, sanded or handled. Breathing it can cause occupational asthma, and hardwood dust is linked to cancer of the nose; accumulated fine dust can also create a separate fire or explosion hazard. Material/task check, user LEV check, any defect action, cleaning record and supervisor release. Apply it: What evidence would show that the change improves this task, rather than only completing a record? Fictional example: a practical application of the existing topic lesson.

Start extraction before cutting, keep capture components in position and watch for escape at the cut and operator breathing zone. Stop the saw, follow the planned clearance, vacuum surfaces with suitable equipment, contain waste and leave the LEV and area in their defined condition. Apply it: At which point would you hold this example, and what evidence would allow it to proceed? Connect the task, the route to the person and the control that can fail. Machine sanding without effective extraction: Fine dust enters the breathing zone repeatedly; sensitisation and occupational asthma can develop. Hardwood cutting and settled-dust re-suspension: Inhaled hardwood dust can reach the nose and is linked to nasal cancer; sweeping can put fine particles back into air.

Dust deposits in extraction or enclosed handling: An ignition source can ignite a dispersed combustible dust cloud and cause a fire or explosion. Apply it: Who could be exposed, including other trades, cleaners, maintainers and people nearby? Control summary. Read the complete task-specific controls and checks in the linked topic. Eliminate: Remove a cutting or sanding step by ordering a pre-sized component or using a finish that avoids dry machining. Reduce, including substitution: Trial a lower-dust method or suitable pre-finished material, checking wood species, coating and new hazards. Isolate: Capture dust at the cutting, shaping or sanding source with correctly designed extraction and suitable collection. Control: Limit access to dusty work, organise effective extraction-compatible cleaning and train operators to check controls.

PPE: Where assessment requires respiratory protection in addition to stronger controls, select suitable RPE for the exposure and wearer. Read the full control table for qualifications, ownership and verification. Use the actual task and applicable jurisdiction; existing technical approval remains unchanged. Apply it: Which stronger option can be used here, and who will verify it before accepting the remaining risk? Follow the official sources below and retain the task-specific evidence. Use the full topic for the decision points, practical examples, detailed control tables and source scope. HSE guidance applies to Great Britain; use HSENI for the Northern Ireland route and the source’s stated jurisdiction. A simplified guide does not change the page’s technical-review or approval status.

Apply it: Which official source and full-topic section will you use to resolve the next decision? Simplified learning guide. Use the full topic and the actual work arrangements; existing technical-review and approval statuses still apply. Workplace scenarios labelled fictional are illustrative examples. Hold the task for unknown material, missing Control of Substances Hazardous to Health (COSHH) or combustible-dust/Dangerous Substances and Explosive Atmospheres Regulations (DSEAR) decisions, unproven capture, unavailable or unsuitable RPE, or an unsafe cleaning route. Class M is the HSE minimum health-filtration baseline for the relevant wood-dust vacuum route; separately assess additives or legacy contamination and, where combustible dust may be present, ignition and explosion suitability. A named supervisor releases work only after the required evidence is accepted. Identify material and task..

During work: Keep capture close and watch escape.; At completion: Stop source and allow planned clearance. Check extraction and RPE.. During work: Pause for changed dust or condition.; At completion: Vacuum safely and contain waste. Confirm people and area.. During work: Keep others outside the exposure zone.; At completion: Record defects and hand back. Wood dust is the airborne and settled particulate produced when hardwood, softwood, composite board or wood-derived material is cut, shaped, sanded, routed, turned, cleaned or handled. It can also contain resins, adhesives, coatings, preservatives, biological material or contamination from previous use. Fine dust can travel beyond the tool and remain on ledges and equipment even when the coarser waste looks controlled. Solid timber.

Examples: Hardwood or softwood cutting and sanding.; Decision: Identify species or treat uncertainty conservatively. Composite board. Examples: MDF, chipboard and fibreboard.; Decision: Assess dust and other constituents. Reclaimed or coated material. Examples: Old paint, preservative, mould or unknown residue.; Decision: Hold until additional hazards are identified. Breathing and skin exposure are controlled through COSHH routes; fire and explosion risk is assessed separately through the applicable DSEAR route. One assessment must not be used as proof for the other. A well-captured task can still leave combustible dust in a collector. An extraction system designed for health capture is not automatically protected against ignition or explosion. Conversely, explosion-protected plant does not prove low worker exposure. Determine both routes from the real process.

Sources: HSE WIS23 Wood dust: Controlling the risks PDF; HSE Construction dust: Cutting and sanding wood; HSE Woodworking hazardous substances; HSE HSG103 Safe handling of combustible dusts; HSE Dangerous Substances and Explosive Atmospheres Regulations

How can wood dust cause illness or a major fire?
How can wood dust cause illness or a major fire?

Source: wood-dust--harm-mechanisms

Dust released at the tool can be inhaled before it is visible across the room. Repeated exposure can sensitise airways and cause occupational asthma; hardwood dust also carries a nasal-cancer risk. Fine dust that accumulates and disperses in an enclosure can form a separate combustible cloud, so health and fire controls must both work. The hazard is the airborne dust and combustible inventory, not the worker who reports symptoms. Record material type, task, duration, extraction capture, nearby exposure and dust deposits; stop or change the task when capture, safe cleaning or fire controls fail. See HSE Wood dust. Sources: HSE Wood dust; HSE WIS23 Wood dust: Controlling the risks; HSE HSG103 Safe handling of combustible dusts

How can wood dust harm health?

Source: wood-dust--health-effects

All wood dust can cause occupational asthma, dermatitis and irritation of the eyes, nose and throat; hardwood dust can also cause a rare nasal cancer. Respiratory sensitisation can make later small exposures provoke symptoms. Cough, wheeze, chest tightness, breathlessness, runny or itchy eyes and nose, and work-related skin change need prompt reporting and competent health advice. Health surveillance supports early detection but never replaces exposure control. Breathing symptoms. Immediate work response: Move from exposure and report promptly.; Specialist route: Occupational health or urgent medical route as appropriate. Skin irritation. Immediate work response: Stop contact, wash as instructed and report.; Specialist route: Review material and skin controls. Eye/nose irritation. Immediate work response: Leave dusty area and use first-aid route.; Specialist route: Review escape and capture.

Persistent or severe symptoms. Immediate work response: Do not wait for routine surveillance.; Specialist route: Urgent clinical assessment. Yes. Identify the material and process because GB exposure limits, cancer classification, sensitising potential, additives and dust behaviour differ; do not treat MDF or a mixed waste stream as generic clean timber. If hardwood and softwood dust are mixed in Great Britain, the hardwood workplace exposure limit (WEL) applies to all wood dust in the mixture. Composite board dust also requires assessment of binders or coatings. Unknown reclaimed timber can carry lead paint, preservatives, mould or other hazards. Hardwood. Key issue: Asthma, dermatitis, irritation and rare nasal cancer.; Hold point: Species or mixture uncertainty affects GB WEL decision. Softwood.

Key issue: Asthma and other health effects.; Hold point: Do not assume low risk. Composite board. Key issue: Wood dust plus binder/additive context.; Hold point: Check product and task information. Reclaimed or coated wood. Key issue: Unknown legacy contamination.; Hold point: Identify before machining. Sawing, routing, turning, planing, sanding, hand-held power sanding, collector emptying and poor cleaning can create high exposure, especially in enclosed or occupied areas. Compressed-air blow-down and dry sweeping disperse settled fine dust and should not be the cleaning method. Bag changes, duct opening and maintenance can disturb concentrated deposits and need a non-routine plan. Sanding. Why exposure rises: Fine dust close to breathing zone.; Primary control question: Can method, enclosure and on-tool extraction control it? Machine cutting or routing.

Why exposure rises: High generation and ejection.; Primary control question: Does hood capture at source? Collector emptying. Why exposure rises: Concentrated dust release.; Primary control question: Is there a contained method and selected RPE? Cleaning. Why exposure rises: Deposits can become airborne again.; Primary control question: Use suitable industrial vacuum, not sweeping or airline. Sources: HSE WIS23 Wood dust: Controlling the risks PDF; HSE Woodworker occupational asthma guidance; HSE INDG172 Breathe freely; HSE Wood dust; HSE EH40/2005 Workplace exposure limits PDF

How do the lungs work, and how can workplace exposures affect breathing?

Source: wood-dust--anatomy-respiratory

Interactive anatomy · Respiratory tract and lungs · Updated 2026-10-23 Connects the existing wood-dust respiratory-sensitisation explanation to airway narrowing; excludes nasal cancer and generic fibrosis. Call 999 for severe breathing difficulty, such as gasping, choking or being unable to get words out. Do not wait for this activity to finish. Do not enter a contaminated or oxygen-deficient space to attempt an unprotected rescue. NHS: Shortness of breath · HSE: Asphyxiation hazards in welding and allied processes Follow air from the upper airway to the air sacs. Separate moving air from exchanging gases, then compare irritation, narrowed airways and two distinct scarring examples. Watch a workplace example Front teaching cutaway with patient right/left marked. Right lung: three lobes; left: two.

Surrounding tissue is omitted to reveal the pathway. Separated teaching view · spacing is altered. Reassemble before following the process. The 2D diagram separates layers only; rotate controls apply to the 3D model. Reduced motion is enabled. Use the numbered steps as still explanations. The complete 2D lesson is ready. Choose to rotate the original teaching model. Exposure example Structure 1 of 10 Air enters and leaves here. The nose and mouth connect the outside air with the respiratory passages. Air moves through these openings on both the inward and outward breath. Follow the route towards the windpipe before looking at the smaller branches. The illustrated flow is air, a mixture of gases, rather than pure oxygen passing directly into blood.

Choose a still step or play the sequence. Illustrative timing; no measurement or personal assessment. Breathing in begins with a change in the space inside the chest. The diaphragm, a dome-shaped muscle beneath the lungs, contracts and moves downwards. Muscles around the ribs help lift the chest upwards and outwards. As the lungs expand with this changing space, air can enter through the airways. Locate the diaphragm and rib cage together rather than treating the lungs as muscles that pull themselves open. The model separates the movement into a teaching step so you can follow its purpose. In the body, chest movement, airflow and blood circulation are connected parts of a continuing process. Learning activity only.

These choices do not diagnose a condition or certify practical competence. Simplified education, not diagnosis, a lung-function or oxygen-saturation test, an exposure calculator or a fitness-to-work assessment. No breath-holding challenge, breathing-rate score or personal health-data collection. Ordinary particle filters do not protect against every gas or oxygen deficiency. COPD and coal-dust topics may reuse normal anatomy only until separate mechanisms are reviewed. Air enters and leaves here. The nose and mouth connect the outside air with the respiratory passages. Air moves through these openings on both the inward and outward breath. Follow the route towards the windpipe before looking at the smaller branches. The illustrated flow is air, a mixture of gases, rather than pure oxygen passing directly into blood.

Frimley Health NHS Foundation Trust: How your lungs work · Central and North West London NHS Foundation Trust: How do we breathe? The windpipe carries air into the chest. The trachea, commonly called the windpipe, carries air down towards the chest. It divides into the two main bronchi that supply the lungs. Locate this shared passage before following either branch. Its role is to conduct air towards the gas-exchange regions and provide an outward route for the next exhalation. Frimley Health NHS Foundation Trust: How your lungs work A main branch carries air into each lung. The two main bronchi take air from the windpipe into the right and left lungs. They divide into progressively smaller branches, distributing the breath through the lungs.

Use the split as a landmark before following one highlighted route. These are air passages, distinct from the blood vessels that run through the same organs. Frimley Health NHS Foundation Trust: How your lungs work · University Hospitals of North Midlands NHS Trust: My lung surgery: about your lungs Smaller branches distribute air. Bronchioles are smaller branches of the airway system inside the lungs. Their branching routes lead towards clusters of alveoli, where the breath reaches the gas-exchange surface. Follow one branch to its end, using the others as context. This simplified route represents part of a much larger network supplying the lungs together. Frimley Health NHS Foundation Trust: How your lungs work Tiny air sacs provide a gas-exchange surface.

Alveoli are tiny air sacs at the ends of the small airway routes. Their close relationship with surrounding capillaries allows oxygen to pass towards blood and carbon dioxide towards alveolar air. Connect the highlighted cluster with the enlarged gas-exchange view. The enlargement changes the scale so the air space and neighbouring blood vessel can be distinguished. Frimley Health NHS Foundation Trust: How your lungs work · Central and North West London NHS Foundation Trust: How do we breathe? A thin boundary separates air from blood. The thin alveolar and capillary walls separate air in the sac from blood in its neighbouring vessel. Oxygen and carbon dioxide cross this boundary in opposite directions. Locate the tissue between the two spaces in the enlarged view.

Blood cells remain in the vessel; the model does not represent an open connection through which air and blood mix. Central and North West London NHS Foundation Trust: How do we breathe? Small blood vessels pass beside the air sacs. Pulmonary capillaries are small blood vessels beside the alveoli. Blood moving through them receives oxygen and releases carbon dioxide across the thin exchange boundary, then continues through the circulation. Follow the labelled gas routes separately from the blood cells. These cells stay inside the capillary rather than moving into the air sac. Central and North West London NHS Foundation Trust: How do we breathe? This muscle helps make room for a breath. The diaphragm is a broad, dome-shaped breathing muscle beneath the lungs.

It contracts and flattens downwards during inhalation, helping increase the space in the chest. During a quiet exhalation it relaxes towards its dome shape. Compare it with the rib cage: their changing positions help move air without the lung tissue acting as a contracting muscle. Cambridge University Hospitals NHS Foundation Trust: Breathing techniques to ease breathlessness: muscles involved Chest movement changes the space around the lungs. The rib cage protects the chest organs and moves with the breathing muscles. Expansion upwards and outwards helps increase chest space during inhalation; relaxation reduces that space during a quiet exhalation. Compare this movement with the diaphragm below the lungs. Together these structures provide the mechanics that allow air to move through the airways.

Central and North West London NHS Foundation Trust: How do we breathe? · Cambridge University Hospitals NHS Foundation Trust: Breathing techniques to ease breathlessness: muscles involved Two thin layers surround the lungs and line the chest. The pleura has two thin layers around the lungs and inside the chest wall. A small amount of fluid between them allows the surfaces to slide with less friction as breathing changes the chest space. Locate this outer covering separately from the internal air sacs; it is not the thin air–blood exchange boundary. Blackpool Teaching Hospitals NHS Foundation Trust: Pleural clinic Open the complete process transcript Breathing in begins with a change in the space inside the chest.

The diaphragm, a dome-shaped muscle beneath the lungs, contracts and moves downwards. Muscles around the ribs help lift the chest upwards and outwards. As the lungs expand with this changing space, air can enter through the airways. Locate the diaphragm and rib cage together rather than treating the lungs as muscles that pull themselves open. The model separates the movement into a teaching step so you can follow its purpose. In the body, chest movement, airflow and blood circulation are connected parts of a continuing process.

Central and North West London NHS Foundation Trust: How do we breathe? · Cambridge University Hospitals NHS Foundation Trust: Breathing techniques to ease breathlessness: muscles involved What to watch: Locate the diaphragm beneath the lungs and the rib cage around them; compare their positions with the space occupied by the lungs. Why it matters: Changing the chest space draws air into the lung passages. The breathing muscles supply the movement, while the lungs expand with the chest to receive the next breath. Explore this step: Select the diaphragm and rib cage in turn, then explain how their movement helps air enter without the lungs contracting like muscles. Air entering through the nose or mouth travels down the trachea, or windpipe, towards the chest.

The trachea divides into the two main bronchi, with one route supplying each lung. Follow this continuous passage in the whole-chest view before moving into the smaller branches. The moving air is a mixture of gases, including oxygen; it is not a stream of pure oxygen travelling straight into the blood. These larger airways carry the breath towards the places where gas exchange happens. The same connected passages also provide the outward route when air is breathed out. Frimley Health NHS Foundation Trust: How your lungs work What to watch: Start at the nose and mouth, follow the trachea downwards and find the split into the right and left main bronchi.

Why it matters: The larger passages distribute air to both lungs and connect the outside air with the smaller branches inside. Gas exchange takes place further along the route, rather than within the windpipe. Explore this step: Trace the route to each lung and distinguish the tubes carrying air from the separate vessels carrying blood. Inside each lung, the bronchi divide into smaller branches called bronchioles. These passages distribute air towards clusters of tiny air sacs, the alveoli. Follow one branch in the close-up and connect its end with an air-sac cluster, using the other branches as surrounding context. These routes distribute the breath throughout the lungs rather than supplying only one working air sac.

A real lung contains many branching routes and air sacs operating together. This distribution brings air close to a large network of small blood vessels, preparing for the exchange shown in the next view. Frimley Health NHS Foundation Trust: How your lungs work What to watch: Follow one smaller airway to the cluster of air sacs at its end, keeping the other branches as surrounding context. Why it matters: Branching delivers air throughout the lungs instead of to one large chamber. The many air sacs bring the inhaled gases close to blood vessels where oxygen and carbon dioxide can cross. Explore this step: Trace one complete branch to its air sacs, then explain how the many branches distribute air throughout the lungs.

The lesson now changes from a branching airway to an enlarged air–blood interface. An alveolus contains air; beside it runs a capillary containing blood. Their very thin walls form the boundary across which gases can move. Locate the air space, the separating tissue and the inside of the vessel before following any gas symbols. The magnified view represents a tiny part of the same lung, not a separate organ or a hole that joins air and blood into one space. The enlargement helps explain how the two systems can exchange gases while keeping their contents separate. Central and North West London NHS Foundation Trust: How do we breathe?

What to watch: Find the air inside the enlarged alveolus, the thin separating boundary and the neighbouring capillary with blood cells inside it. Why it matters: A close boundary allows gases to cross between alveolar air and capillary blood. Keeping the two spaces separate lets ventilation and circulation cooperate without blood cells entering the air sac. Explore this step: Identify the air space and blood-vessel space, then point to the boundary each gas must cross between them. At the air–blood boundary, oxygen moves from the alveolar air into the capillary blood. At the same time, carbon dioxide carried back from the body moves from the blood into the air sac. The two gases cross in opposite directions; blood cells stay within the vessel.

Follow each labelled symbol separately so that exchanging gases is not confused with mixing the air and blood together. Blood then carries oxygen onwards towards the heart and the body’s tissues. The teaching symbols simplify continuous gas movement, and their size, colour and speed do not represent a measurement. Central and North West London NHS Foundation Trust: How do we breathe? What to watch: Follow the O₂ symbol towards the capillary and the CO₂ symbol towards the air sac, while locating the blood cells within the vessel. Why it matters: Oxygen can be carried onwards for use by the body, while carbon dioxide returns to the airways for removal. Both transfers connect the breath with the continuing circulation of blood.

Explore this step: Trace the two gas routes in opposite directions and explain why a blood cell should remain inside the capillary. During a quiet breath out, the diaphragm and other breathing muscles relax. The diaphragm returns towards its dome shape, chest space decreases and air moves back along the airways to the nose or mouth. This outgoing air carries carbon dioxide that crossed from the blood into the alveoli. Trace the route in reverse without reversing the direction of blood circulation: oxygen-carrying blood continues towards the heart while another breath prepares to enter. The model presents a single cycle to explain the relationship. It does not show breathing as a series of separate events in which circulation stops between steps.

Central and North West London NHS Foundation Trust: How do we breathe? · Cambridge University Hospitals NHS Foundation Trust: Breathing techniques to ease breathlessness: muscles involved What to watch: Compare the diaphragm and chest with the inhalation step, then follow the outward airway route from the lungs to the nose or mouth. Why it matters: Exhalation removes air containing carbon dioxide from gas exchange. Meanwhile, blood circulation continues carrying oxygen onwards, linking this breathing cycle with the needs of the rest of the body. Explore this step: Trace the outward air route and the onward blood route separately, then describe why they are connected processes with different pathways. Sensitiser-related asthma Some people become sensitised to workplace substances such as flour or wood dust.

Later exposure may trigger inflamed, narrowed airways, sometimes at low levels. Compare the airway opening, not the size of the whole lung. Sensitisation and later triggering are different phases, shown without a fixed clock. Work can also worsen existing asthma. Not all work-related asthma is an allergic reaction. A symptom pattern can prompt investigation but cannot establish a diagnosis from this model. HSE: Asthma: an overview · NHS: Asthma · HSE: Flour dust and risks to bakers Assess sensitisers and maintain exposure controls Reduce dusty flour handling Get clinical advice about asthma symptoms Look at: The airway opening, its muscle and swollen lining. What changes: In asthma, narrowing, swelling and mucus can restrict the route for air.

Why it matters: Breathing may become difficult, with wheeze, cough or chest tightness. What to do: Prevent exposure to the cause and report breathing symptoms for medical assessment. Bakery: flour is tipped and benches are dusted repeatedly during production. Time jump: sensitisation may develop over a variable period; a later exposure may trigger symptoms. This is not asthma developing in 32 seconds. Not every exposed or sensitised person develops asthma. Wheeze or timing alone does not establish the cause or diagnosis. A dusty bakery task Flour is tipped into a mixer and used to dust the bench. Review low-dust ingredients and careful handling before relying on the worker to avoid a visible cloud.

HSE: Flour dust and risks to bakers Repeated exposure, then a time jump Breathing flour dust can lead to sensitisation in some people over time. The timeline now jumps to a later contact after a hypersensitive state has developed in this chosen example. HSE: Asthma: an overview · HSE: Flour dust and risks to bakers A later contact can narrow airways The airway wall becomes inflamed and the breathing passage narrows in the illustrative asthma episode. Symptoms may occur during the task or later; this is not the same as identifying asthma by a short animation. HSE: Asthma: an overview · NHS: Asthma Report patterns and reduce exposure Report work-related breathing problems promptly and obtain clinical advice.

Review low-dust flour, transfer/handling and the full control assessment; use the emergency panel immediately for severe breathing difficulty. HSE: Advice for employers: occupational asthma · HSE: Flour dust and risks to bakers · NHS: Shortness of breath A team plans repeated concrete cuts with a handheld cut-off saw. Dust can enter the operator’s and nearby workers’ breathing zones. Open a window and use the same dry-cutting method. — A window alone does not control dust generated beside the face. Choose task controls that prevent or capture it at source. First reduce the need to cut, then assess source suppression or extraction and any required suitable RPE. — This addresses the task before exposure occurs.

Check that suppression or extraction works and that required RPE is suitable, fitted and used. Continue while nobody is coughing. — Symptoms are not an exposure monitor. Harmful respirable dust may be invisible, and a worker can feel well during exposure. A bakery worker notices repeated wheeze after dusty flour tasks, including some symptoms later in the evening. Report the pattern and seek medical and workplace assessment. — Reporting the pattern allows exposure controls and clinical assessment to be reviewed. Symptoms can be delayed; a clinician may need further investigation. Use this model to diagnose occupational asthma. — The model explains a mechanism. It cannot diagnose asthma or establish that work caused it.

Assume the task is safe if breathing improves away from work. — Improvement away from work may be useful information for investigation, but it does not show that returning to the same exposure is safe. One diagram shows a narrowed airway at LUN03–04. A second shows scarred gas-exchange tissue around LUN05–07. They show the same disease at successive stages. — Narrowed airways and scarred lung tissue are different changes. One is not automatically the next stage of the other. Both effects disappear when airborne dust settles. — Removing airborne dust does not reverse established fibrosis. Controlling further exposure remains important. Airway narrowing and tissue fibrosis are different mechanisms. — Correct. Airway narrowing affects the passage for air; fibrosis affects lung tissue and its function.

Neither picture supplies an individual diagnosis. The opening images are anatomical illustrations. The interactive 3D models and labelled SVG diagrams use original procedural artwork. These teaching images are not medical scans or diagnostic tools. Source references support the learner explanations and do not grant artwork rights. Asset and review record · Three.js MIT licence All anatomy, process and practice explanations remain available in the expandable reading sections. Interactive selection requires JavaScript. Call 999 for severe breathing difficulty, such as gasping, choking or being unable to get words out. Do not wait for this activity to finish. Do not enter a contaminated or oxygen-deficient space to attempt an unprotected rescue. NHS: Shortness of breath · HSE: Asphyxiation hazards in welding and allied processes

How does wood-dust control change across settings?
How does wood-dust control change across settings?

Source: wood-dust--sector-transfer

The same exposure and fire questions apply in a fixed workshop, a construction fit-out, a maintenance room and a training space, but the machine, duration, people nearby and extraction design differ. Specify the actual dust source and the person who can pause work and restore control. Do not assume outdoor work or a small job is safe by appearance. Assess hardwood, softwood and composite materials, occupied rooms, neighbouring trades and any enclosed extraction or combustible deposits. Sources: HSE Wood dust; HSE WIS23 Wood dust: Controlling the risks; HSE Construction dust: Cutting and sanding wood; HSE HSG103 Safe handling of combustible dusts

What must a wood-dust COSHH assessment decide?

Source: wood-dust--coshh-assessment

Identify who can be exposed, each material and dusty task, frequency and duration, spread, existing controls, residual exposure, RPE, cleaning, maintenance, monitoring, surveillance and emergency actions. Source basis: HSE Dangerous Substances and Explosive Atmospheres Regulations · HSE EH40/2005 Workplace exposure limits · HSE EH40/2005 Workplace exposure limits PDF · Control of Substances Hazardous to Health Regulations 2002 · Dangerous Substances and Explosive Atmospheres Regulations 2002 · HSENI Woodworking · HSE HSG103 Safe handling of combustible dusts · Control of Substances Hazardous to Health Regulations Northern Ireland 2003 · Dangerous Substances and Explosive Atmospheres Regulations Northern Ireland 2003 · HSE WIS23 Wood dust: Controlling the risks PDF · HSE Wood dust. Observe representative work, including setup, finishing, collector emptying and clean-up.

Include nearby workers and people entering after the task. Record uncertainty and a decision owner; reassess after material, tool, layout, extraction, work rate, symptom, monitoring or defect changes. See HSE Wood dust. Material and contaminants. Evidence needed: Product, species and coating information.; Failure signal: Unknown reclaimed or composite material. Task and people. Evidence needed: Real sequence, duration and occupancy.; Failure signal: Assessment covers only cutting, not cleaning. Control performance. Evidence needed: Capture observation, benchmark and test record.; Failure signal: Vacuum noise mistaken for effective control. Residual exposure. Evidence needed: Monitoring where needed and symptom feedback.; Failure signal: WEL used as a target.

For Great Britain inhalable wood dust, EH40 gives eight-hour time-weighted average (TWA) WELs of 3 mg/m3 for hardwood and 5 mg/m3 for softwood; when hardwood and softwood are mixed, 3 mg/m3 applies to all wood dust present. These are limits, not safe targets, and carcinogen and asthmagen exposure must also be reduced as low as is reasonably practicable. These are inhalable-dust limits, not a target, a safe time allowance or proof that controls are adequate. For carcinogens and asthmagens, GB exposure must also be reduced as low as is reasonably practicable. Worked decision: if a mixed sanding extract contains hardwood and softwood, use 3 mg/m3 for the mixture and still improve source control rather than planning to the limit.

Northern Ireland uses separate COSHH NI law; HSENI references EH40 for wood dust, but obtain current HSENI or competent legal confirmation before treating a GB WEL statement as the NI legal limit. Sources: Control of Substances Hazardous to Health Regulations 2002; Control of Substances Hazardous to Health Regulations Northern Ireland 2003; HSE WIS23 Wood dust: Controlling the risks PDF; HSE EH40/2005 Workplace exposure limits; HSE EH40/2005 Workplace exposure limits PDF

What is the wood-dust control hierarchy?

Source: wood-dust--control-hierarchy

Avoid or reduce dust generation, enclose and capture at source, segregate people, then clean using at least Class M vacuum equipment or an assessed LEV suction-hose alternative; use suitable, fit-confirmed RPE only for residual risk or defined non-routine work. Class M alone does not establish contaminant or explosion suitability. Examples include off-site prefabrication, pre-cut or pre-finished material, lower-dust methods, effective machine enclosure, integrated LEV, on-tool extraction, segregation, planned vacuum cleaning and controlled waste handling. PPE cannot compensate for an avoidable dusty method or failed extraction. Avoid or reduce. Wood-dust application: Pre-cut, pre-finished or less dusty process.; Evidence: Method decision. Enclose and extract. Wood-dust application: Integrated hood or on-tool capture.; Evidence: Commissioning and use benchmark. Organise and clean.

Wood-dust application: Segregation plus at least Class M vacuum equipment or assessed LEV suction-hose cleaning.; Evidence: Task record plus separate contamination and combustible-dust suitability. RPE for residual risk. Wood-dust application: Selected for hazard, wearer, task and environment.; Evidence: Fit, training, use and maintenance evidence. Compare the complete job, not only the tool: material, finish, generation rate, enclosure, extraction compatibility, duration, access, other hazards and cleaning burden all affect the choice. A slower tool that creates fine dust for much longer may not reduce total exposure. Wet methods may be unsuitable for wood, electrics or product quality. Trial the intended method under representative conditions and involve workers before standardising it. Can cutting be avoided?. Check: Pre-cut or factory-finished supply.; Boundary: Confirm logistics and other risks.

Can dust be enclosed?. Check: Machine hood, booth or isolated cell.; Boundary: Keep access and maintenance safe. Can capture be integrated?. Check: Compatible port, hose and extractor.; Boundary: Verify flow and capture at the tool. Does the change create another hazard?. Check: Noise, vibration, kickback, electricity or quality.; Boundary: Use the full task assessment. Sources: HSE WIS23 Wood dust: Controlling the risks PDF; HSE Construction dust: Cutting and sanding wood; HSE HSG53 Respiratory protective equipment at work

How can the hierarchy of controls reduce wood-dust exposure during cutting and sanding?

Source: wood-dust--control-priorities

Remove the hazard where reasonably practicable. If it remains, consider a safer method, engineering controls and safe work arrangements before personal protective equipment for residual risk. HSE places elimination, substitution, engineering, administrative controls and personal protective equipment in that order. Verify that the chosen controls work on the actual task. ERICPD (Eliminate, Reduce including substitution, Isolate, Control, personal protective equipment (PPE), Discipline) is a SHARE decision prompt cross-mapped to HSE’s five-level hierarchy. Choose stronger feasible controls first, verify them in the actual task and record why a stronger option cannot be used. Discipline means sustaining controls through maintenance, supervision and learning. ERICPD is a planning crossmap. Its prompts do not add a sixth rung or rank Isolate above engineering.

Discipline verifies and sustains every control level. The hierarchy of controls in ISO 45001:2018 comes under Clause 8.1.2 (Eliminating hazards and reducing OH&S risks), which is located within Clause 8 ("Operation"). ESEAP: Elimination, Substitution, Engineering controls, Administrative controls and PPE. Control order: HSE hierarchy of controls and IOSH hierarchy of control guidance. Sources: HSE hierarchy of control

What does effective LEV look like?

Source: wood-dust--lev

LEV must capture dust at or close to where it is generated, convey it without leakage, clean the air as designed and discharge or contain dust safely. Source basis: HSE Woodworker occupational asthma guidance · HSE Construction dust: Cutting and sanding wood · HSE Woodworking hazardous substances · HSENI Woodworking · HSE HSG103 Safe handling of combustible dusts · HSE INDG172 Breathe freely · HSE INDG408 Clearing the air · HSE Local exhaust ventilation · HSE LEV frequently asked questions · HSE WIS23 Wood dust: Controlling the risks · HSE WIS23 Wood dust: Controlling the risks PDF · HSE Woodworking frequently asked questions. 2 linked parts. Follow the question numbers and complete the applicable route.

Part 1 of 2 · Questions 1–3 Source basis: HSE Woodworker occupational asthma guidance · HSE Construction dust: Cutting and sanding wood · HSE Woodworking hazardous substances · HSE HSG103 Safe handling of combustible dusts · HSE HSG53 Respiratory protective equipment at work · HSE INDG172 Breathe freely · HSE INDG408 Clearing the air · HSE Local exhaust ventilation · HSE LEV frequently asked questions · HSE Respiratory protective equipment FAQs · HSE WIS23 Wood dust: Controlling the risks · HSE WIS23 Wood dust: Controlling the risks PDF · HSE Woodworking frequently asked questions. The hood must suit the machine and operator position. Ducts, hoses, filters and collectors need adequate performance and safe access.

An airflow indicator helps the user compare current operation with the normal benchmark, but it does not replace observation, maintenance, commissioning or thorough examination and test. See HSE WIS23 Wood dust: Controlling the risks. Give the supplier the real materials, machines, tasks, work rates, operator positions, contaminants and constraints, then require a performance specification, commissioning report, user manual, logbook and training. Changing a hood, duct, filter, fan, layout, recirculation route or collector can alter health capture and combustible-dust risk. A competent person must verify both before release. The user benchmark should make failure visible without relying on memory or sound. Specification. Required output: Contaminant, process, users and performance.; Hold point: No generic vacuum purchase alone. Installation.

Required output: Safe access, discharge and integration.; Hold point: No unreviewed field change. Commissioning. Required output: Effective capture and reference measurements.; Hold point: No use without accepted benchmark. Change. Required output: Recommissioning and DSEAR review where relevant.; Hold point: Hold until effects are understood. Confirm the assessed material, method and combustible-dust decision; inspect the tool and extraction; compare the airflow indicator with its accepted benchmark; check collector capacity, segregation and waste; confirm at least Class M vacuum cleaning or an assessed LEV suction-hose alternative; and don required task-selected, fit-confirmed RPE before dust generation. Hold for an unknown wood, board, coating or contaminant; missing commissioning benchmark; failed indicator; damaged hose; full collector; uncertain fire or explosion protection; unavailable RPE; or unsuitable cleaning equipment.

Check contamination and combustible-dust suitability separately from the Class M health-filtration baseline, and identify the evidence and named supervisor needed to release a corrected task. Pause if visible dust escapes, the airflow indication changes, a hose blocks or disconnects, the collector leaks, material or work rate changes, RPE fit is lost, others enter the area or symptoms occur. Stop the tool safely before adjusting capture. Do not pull a hood away for convenience, defeat an interlock or continue because the task is nearly finished. If the changed condition could affect fire or explosion risk, place the process in its defined safe state and use the DSEAR escalation route. Dust escape. Immediate action: Stop and check capture and method.; Release basis: Effective control restored and observed.

Low-flow or blockage. Immediate action: Stop source and isolate for safe defect action.; Release basis: Repair and accepted performance. Material or duration change. Immediate action: Reassess exposure and other hazards.; Release basis: Supervisor approval. Symptom or RPE failure. Immediate action: Leave exposure and report.; Release basis: Competent health or RPE decision. Stop dust generation, maintain assessed RPE through clearance and cleaning until outside contaminated air, clean with at least Class M vacuum equipment or the assessed LEV suction-hose alternative, contain waste, inspect controls, record defects and release the area only when health and fire risks are controlled and the named supervisor accepts the evidence. Do not remove RPE inside the contaminated zone merely because the tool has stopped.

Do not dry sweep or use compressed air. Return hoods, hoses and tools in a clean, sound condition; quarantine defective equipment and communicate any restriction to the next user. Source stopped and area controlled. Evidence: Task end time and access restriction. At least Class M vacuum or assessed LEV suction-hose cleaning and contained waste. Evidence: Method, contamination/explosion suitability and disposal route. Tool and LEV inspection. Evidence: Defect, blockage or collector status. Area release. Evidence: Supervisor check and communicated hand-back.

Sources: HSE WIS23 Wood dust: Controlling the risks PDF; HSE Local exhaust ventilation; HSE INDG408 Clearing the air; HSE LEV frequently asked questions; HSE HSG103 Safe handling of combustible dusts The commissioning record for a panel saw and sander identifies the approved simultaneous-use combinations, required open inlets and the accepted indicator range for each. A user compares the actual hood and branch configuration with that record before starting. If another branch opens and the indication leaves its documented range, stop and seek a competent LEV check; do not invent a universal airflow value or accept the absence of visible dust as proof of capture. Record the restored configuration and accepted check before supervisor release.

How should settled wood dust be cleaned?
How should settled wood dust be cleaned?

Source: wood-dust--housekeeping

For relevant wood-dust cleaning, use vacuum equipment meeting at least dust Class M or an assessed LEV suction-hose alternative; contain waste and never dry sweep or use compressed-air blow-down. Class M is a health-filtration baseline, not proof of suitability for additives, legacy contamination or an explosive atmosphere. Plan high-level cleaning, collector emptying and inaccessible deposits as controlled tasks. Select equipment separately for the actual contaminant and, where combustible dust may be present, ignition and explosion risk. Keep required RPE on through the assessed clearance and clean-up and until the worker is outside contaminated air; prevent dust escape during transfer and stop for heat, smoke, damaged containment or uncertain suitability. At least Class M industrial vacuum or assessed LEV suction-hose alternative.

Decision: HSE minimum health-filtration route for relevant wood-dust cleaning; select separately for contamination and explosion suitability. Dry sweeping. Decision: Do not use as the wood-dust control method. Compressed air. Decision: Do not disperse deposits or clean clothing/workpieces this way. Collector or bag handling. Decision: Contained method, supervision and residual-risk RPE as assessed. Sources: HSE WIS23 Wood dust: Controlling the risks PDF; HSE Woodworking hazardous substances; HSE Woodworker occupational asthma guidance

When is RPE needed for wood dust?

Source: wood-dust--rpe

Use RPE only for assessed residual or defined non-routine wood-dust risk after source controls: select adequate and suitable protection for the contaminant, wearer, task and environment; fit test the exact tight-fitting model and size; check seal and compatibility; don before dust generation; and wear it through clearance and clean-up until outside contaminated air. Failed extraction means stop, not mask-only continuation. Source basis: HSE HSG53 Respiratory protective equipment at work · HSE Respiratory protective equipment FAQs · HSE WIS23 Wood dust: Controlling the risks PDF · HSE Woodworking frequently asked questions.

When RPE is needed for wood dust, HSE WIS23 specifies a minimum UK assigned protection factor (APF) of 20, for example suitable FFP3 or P3 arrangements, but selection must still match the contaminant, wearer, task, duration, work rate and environment. RPE is not the only control and an APF number alone is not a complete selection. See HSE HSG53 Respiratory protective equipment at work. A tight-fitting facepiece must be fit tested on the individual using the same make, model, type and size, and its seal must not be crossed by facial hair; check the seal every time it is put on.

If an adequate tight fit cannot be achieved, select a suitable non-tight-fitting alternative such as an appropriate powered hood or helmet rather than pretending a leaking mask protects. Reassess compatibility with eye, hearing, head and other PPE. Fit testing is evidence for a model and wearer, not permission to use it for every hazard. New make, model, type or size. Decision: Fit test before reliance. Facial hair in seal area. Decision: Tight-fitting option is unsuitable. Weight change or facial change. Decision: Review fit and retest as needed. Other PPE disrupts seal. Decision: Resolve compatibility before work. Sources: HSE WIS23 Wood dust: Controlling the risks PDF; HSE Woodworking frequently asked questions; HSE HSG53 Respiratory protective equipment at work; HSE Respiratory protective equipment FAQs

When is health surveillance needed?

Source: wood-dust--health-surveillance

Workers who might breathe wood dust need a wood-specific health-surveillance decision under the applicable COSHH route: establish a baseline, then use ongoing respiratory checks at a frequency set by competent occupational health, normally a questionnaire and spirometry, with confidential health records, between-check symptom reporting and management action on findings. Use competent occupational-health advice to select methods and frequency, interpret individual and group results and decide whether a lighter annual questionnaire-and-record scheme is justified in limited circumstances. HSE guidance applies within the GB COSHH route and HSENI guidance within the NI COSHH route. Managers must investigate control concerns and act on necessary work advice, but must not diagnose asthma, decide medical fitness or receive unrelated confidential clinical detail. See HSE Health surveillance overview.

Use competent personal or static monitoring when it is needed to decide whether controls are adequate, validate a representative worst case, investigate change or defect, or support review; it is not a substitute for effective control. A sample must match the task, material, people, duration and conditions being judged. Interpret GB results against EH40 and the ALARP requirement, not as a simple pass/fail badge. In NI, use the current NI legal and HSENI route. Pair results with capture observation, LEV data, work practices and health information. Baseline validation. Good question: Does the system control representative work?; Bad use: One quiet-day sample for all tasks. Change or defect. Good question: Did exposure rise and has repair restored control?; Bad use: Sampling while known control failure continues.

WEL comparison. Good question: Correct fraction, averaging period and uncertainty?; Bad use: Treating below-WEL as no further action. Worker communication. Good question: Explain result and control consequence.; Bad use: Publishing individual health inference. Sources: HSE Health surveillance overview; HSENI Woodworking; HSE Woodworker occupational asthma guidance; HSE EH40/2005 Workplace exposure limits; Control of Substances Hazardous to Health Regulations 2002

When does wood dust need a combustible-dust assessment?

Source: wood-dust--combustible-applicability

Screen every process that makes or handles fine dry wood dust, then obtain competent DSEAR assessment where a dangerous dust cloud, deposit or handling system could create fire or explosion risk.

Source basis: HSE Woodworker occupational asthma guidance · HSE Dangerous Substances and Explosive Atmospheres Regulations · HSE EH40/2005 Workplace exposure limits · HSE EH40/2005 Workplace exposure limits PDF · Control of Substances Hazardous to Health Regulations 2002 · Dangerous Substances and Explosive Atmospheres Regulations 2002 · HSE Woodworking hazardous substances · HSENI Woodworking · HSE HSG103 Safe handling of combustible dusts · Control of Substances Hazardous to Health Regulations Northern Ireland 2003 · Dangerous Substances and Explosive Atmospheres Regulations Northern Ireland 2003 · HSE WIS23 Wood dust: Controlling the risks PDF · HSE Wood dust. 2 linked parts. Follow the question numbers and complete the applicable route.

Part 1 of 2 · Questions 1–3 Source basis: HSE Dangerous Substances and Explosive Atmospheres Regulations · Dangerous Substances and Explosive Atmospheres Regulations 2002 · HSE HSG103 Safe handling of combustible dusts · Dangerous Substances and Explosive Atmospheres Regulations Northern Ireland 2003 · HSE WIS23 Wood dust: Controlling the risks PDF. Do not declare an explosive atmosphere from the word dust alone, and do not dismiss it because building explosions are uncommon. Consider particle form, dryness, quantity, airborne cloud, confinement, extraction and conveying plant, accumulations, ignition sources, connected volumes and consequences. Representative dust testing may be needed. See HSE HSG103 Safe handling of combustible dusts.

Where DSEAR applies, eliminate or reduce dangerous dust, prevent release and explosive atmospheres where practicable, control ignition, classify hazardous areas where needed, limit effects, coordinate work and prepare scenario-based emergency arrangements. Competent design may need segregation, explosion relief or suppression, isolation against propagation, suitable equipment, earthing, fire detection or other measures. This page does not select them. Dust test values in HSG103 are examples expressly not intended for direct plant design; use representative material data and current standards. Can dust be avoided or contained?. Evidence: Process and plant design basis.; Hold trigger: Open release treated as normal. Can ignition occur?. Evidence: Equipment, static, heat and work-control review.; Hold trigger: Uncontrolled hot work or damaged plant. Can event propagate?.

Evidence: Duct, collector and connected-volume study.; Hold trigger: No isolation/mitigation basis. Can people be protected?. Evidence: Layout, remote action and emergency plan.; Hold trigger: Unplanned local intervention required. An extraction system concentrates and transports wood dust; ignition can begin in machinery, ducts, fans, filters or collectors and may spread through connected plant. Health-capture performance and fire/explosion protection must be designed together. Monitor overheating, sparks, friction, damaged fan parts, blockages, leaking deposits and abnormal pressure or sound. Do not open a collector, remove a panel or use a routine vacuum while smoke, heat or an internal fire may be present. Smoke, burning smell or heat. Immediate route: Stop process and follow alarm/emergency plan from a safe position.; Do not: Open collector or investigate alone.

Spark or hot fragment concern. Immediate route: Hold feed and use defined isolation route.; Do not: Restart after visual glance. Dust leak or deposit. Immediate route: Stop source, restrict area and assess both risks.; Do not: Sweep deposit into the air. Suppression/relief fault. Immediate route: Take affected plant out of service pending specialist decision.; Do not: Treat health extraction as fully available. Sources: HSE WIS23 Wood dust: Controlling the risks PDF; HSE HSG103 Safe handling of combustible dusts; HSE Dangerous Substances and Explosive Atmospheres Regulations; Dangerous Substances and Explosive Atmospheres Regulations 2002; Dangerous Substances and Explosive Atmospheres Regulations Northern Ireland 2003

How should wood-dust plant be maintained or opened?
How should wood-dust plant be maintained or opened?

Source: wood-dust--maintenance

Plan maintenance as a dusty and potentially combustible non-routine task: stop and isolate energy and material sources, establish the internal condition, control deposits, prevent ignition, use suitable PPE/RPE and prove safe restoration. Source basis: HSENI Woodworking · HSE HSG103 Safe handling of combustible dusts · HSE LEV frequently asked questions · HSE WIS23 Wood dust: Controlling the risks PDF. A thorough examination and test (TExT) is not a maintenance substitute. In Great Britain, HSE states LEV is normally thoroughly examined and tested at least every 14 months, with shorter intervals where necessary; NI has separate COSHH requirements and HSENI woodworking guidance advises thorough testing at least once every year.

Distinguish that guidance from the applicable statutory NI interval and confirm the current instrument and plant-specific schedule. Critical defects require immediate action, not a future label date. Preparation. Control: Isolate process and extraction; assess deposits and atmosphere.; Evidence: Work plan and isolation. Opening or cleaning. Control: Contained method, ignition control and selected RPE.; Evidence: Permit/task record. Repair. Control: Correct component and design basis.; Evidence: Repair and inspection. Return. Control: Check capture and fire/explosion protection.; Evidence: Accepted test and authorised release. Quarantine failed or uncertain capture, spread dust, hot or suspect collectors or ducts, unsuitable RPE, missing DSEAR measures and unknown material.

Prevent use and preserve the state; release only after competent repair or identification, controlled cleaning, accepted capture and relevant fire-protection tests, updated assessment, user briefing and named supervisor or operating-owner authorisation. Mark the restriction, prevent use, preserve plant state and notify the responsible owner. Repair alone is not release: verify capture, clean contamination, test relevant fire/explosion protection, update assessment and brief users before named authorisation. LEV defect. Quarantine boundary: Tool or machine and affected area.; Release evidence: Repair plus accepted capture check. Dust spread. Quarantine boundary: Exposed room, surfaces and adjacent activity.; Release evidence: Controlled clean and exposure review. Fire/explosion concern. Quarantine boundary: Collector, ducts and connected plant.; Release evidence: Specialist fire/DSEAR integrity decision. Unknown material.

Quarantine boundary: Material and generating task.; Release evidence: Identification and revised assessment. Sources: HSE LEV frequently asked questions; HSENI Woodworking; HSE HSG103 Safe handling of combustible dusts; HSE WIS23 Wood dust: Controlling the risks PDF

What should happen after a dust exposure or symptoms?

Source: wood-dust--acute-exposure

Stop exposure and move to clean air without entering another hazard; call emergency services for severe breathing difficulty, collapse or other life-threatening symptoms, otherwise use prompt first-aid and medical or occupational-health help. Quarantine the source, identify others exposed, preserve material and task facts and do not return anyone because symptoms ease. Call emergency services for severe breathing difficulty, collapse or other life-threatening symptoms. Do not diagnose occupational asthma on site or send someone back because symptoms ease. Quarantine the failed method or equipment, identify others who may have been exposed and obtain occupational-health advice. Severe breathing difficulty or collapse. Action: Call emergency services and follow trained first aid. Wheeze, tight chest or persistent cough. Action: Leave exposure; prompt medical/OH assessment. Eye or skin irritation.

Action: Use local decontamination/first-aid route and report. Possible group exposure. Action: Stop source, identify people and review controls. For smoke, flame, unusual heat, burning smell, sparks, abnormal pressure or immediate danger, raise the alarm, use only the approved remote shutdown or isolation if trained and safe, evacuate or shelter as directed, call emergency services and keep away. Do not approach, open, vacuum, improvise firefighting, re-enter or restart; incident command controls the emergency and a separate named operating owner controls recovery and restart. Do not improvise firefighting, open a collector, remove filters, create a dust cloud, re-enter or restart. Incident command decides emergency control.

A separate competent recovery team assesses residual fire, deposits, structural and plant integrity, contamination and evidence before a named operating owner authorises any return. Alarm and initial safe state. Decision owner: Trained worker or control-room route.; Evidence: Alarm, shutdown and evacuation record. Emergency control. Decision owner: Incident commander and emergency services.; Evidence: Command and handover log. Recovery assessment. Decision owner: Competent fire, DSEAR, engineering and hygiene specialists.; Evidence: Condition and remedial evidence. Restart. Decision owner: Named operating owner with required approvals.; Evidence: Formal release after cause and protection are addressed. Sources: HSE INDG172 Breathe freely; HSE Woodworker occupational asthma guidance; Control of Substances Hazardous to Health Regulations 2002; Control of Substances Hazardous to Health Regulations Northern Ireland 2003; HSE HSG103 Safe handling of combustible dusts

How should host and contractor wood-dust work be coordinated?

Source: wood-dust--contractors

The host and contractor must exchange material, process, exposure, extraction, occupancy, cleaning, fire/explosion and emergency information and agree who controls each interface before work starts. A contractor vacuum, mask or generic RAMS does not prove adequate control. Check compatibility with the host LEV and power supply, other work, combustible-dust classification and waste route. The host retains duties placed on it and must not allow dusty work to expose its workers or the public. Material and process. Agreement needed: What is cut, sanded or opened, including coatings. Controls. Agreement needed: Who supplies, checks and maintains extraction and RPE. Area. Agreement needed: Segregation, adjacent occupancy and cleaning. Fire/explosion. Agreement needed: DSEAR basis, ignition control and emergency plan. Hand-back. Agreement needed: Dust-free condition, waste, defects and release owner.

People need the knowledge, skill, experience and authority for their task; attending a course alone does not make someone competent to design LEV, perform TExT, select RPE, assess DSEAR or authorise restart. Workers demonstrate setup, extraction and RPE checks, cleaning, symptom reporting and stop actions. Supervisors recognise failed capture and changed conditions. LEV designers, commissioners and examiners need relevant practical competence. Occupational-health and combustible-dust decisions stay with their specialists. User. Demonstrated capability: Operate controls and stop/report.; Boundary: Does not approve plant design. Supervisor. Demonstrated capability: Match task to assessment and hold/release within authority.; Boundary: Escalates specialist uncertainty. LEV specialist. Demonstrated capability: Specify, commission or TExT within competence.; Boundary: Not automatically a DSEAR designer. DSEAR/OH specialist.

Demonstrated capability: Make domain decision and communicate limits.; Boundary: Does not replace operating ownership. Allocate clear ownership from purchasing to disposal so no one assumes that extraction, RPE, surveillance or DSEAR decisions belong to someone else. Workers and representatives should help test whether controls work in real use. Managers need to resource repair and cleaning, protect health confidentiality and resolve overdue defects. Auditors should trace field evidence, not just document presence. Purchasing. Work product: Task-based tool, extraction, vacuum and RPE specification. Operations or site management. Work product: Area, schedule, occupancy and hold/release decisions. Maintenance. Work product: Condition, isolation, repair and restoration evidence. Occupational health. Work product: Confidential health checks and work advice. Safety/assurance. Work product: COSHH/DSEAR integration, trends and action closeout.

Sources: Control of Substances Hazardous to Health Regulations 2002; Control of Substances Hazardous to Health Regulations Northern Ireland 2003; HSE WIS23 Wood dust: Controlling the risks PDF; HSE INDG408 Clearing the air; HSE LEV frequently asked questions

What must each wood-dust role learn and demonstrate?

Source: wood-dust--training-competence

Woodworking users need to recognise dust escape and check extraction before use; designers and maintainers need to prove capture and plant integrity; managers need to act on defects and surveillance signals. DSEAR and respiratory-health decisions require competent specialists. A certificate or a mask issue alone does not prove that a control works. Test the decision at the actual machine and during cleaning. Reassess after a tool, material, hood, extraction layout, work method or worker-health signal changes. Sources: HSE WIS23 Wood dust: Controlling the risks; HSE Wood dust; HSE Local exhaust ventilation; HSE HSG103 Safe handling of combustible dusts

How do product-supply rules differ from workplace-use duties?

Source: wood-dust--product-supply

PPE placed on the Great Britain and Northern Ireland markets follows different current product-supply routes; employer duties still require a respirator that is adequate, suitable, fit tested where tight-fitting, maintained and used within the COSHH system. A CE or UK Conformity Assessed (UKCA) marking, APF label or standard number is not a task assessment or fit result. Procurement should check the current GB or NI placing-on-market guidance, manufacturer instructions, filter and facepiece compatibility, and the actual wearer and environment. Similar separation applies to explosion-protected equipment: conformity does not replace workplace classification or competent design. Can it be legally supplied?. Product-supply decision: Current GB or NI product route.; Workplace-use decision: Not proof of task control. Does it claim a protection level?.

Product-supply decision: Manufacturer and conformity evidence.; Workplace-use decision: Validate adequacy for contaminant. Will it protect this person?. Product-supply decision: Not answered by marking.; Workplace-use decision: Suitability, fit and programme. Is equipment suitable in a hazardous area?. Product-supply decision: Relevant product route.; Workplace-use decision: Site classification and DSEAR assessment. Sources: GOV.UK PPE product-safety guidance: Great Britain; GOV.UK PPE product-safety guidance: Northern Ireland; HSE Respiratory protective equipment FAQs; HSE Dangerous Substances and Explosive Atmospheres Regulations

Which Great Britain duties apply?
Which Great Britain duties apply?

Source: wood-dust--gb-law

In Great Britain, COSHH 2002 governs health assessment and exposure control, including maintenance, monitoring, surveillance and information where applicable; DSEAR 2002 separately governs fire and explosion risks from dangerous substances at work. EH40 provides GB WELs. HSE WIS23 and related pages are guidance on controlling wood dust. Other duties for machinery, general risk management, PPE use, fire safety, waste and environmental emissions may also apply but are not merged into one wood-dust rule here. Sources: Control of Substances Hazardous to Health Regulations 2002; Dangerous Substances and Explosive Atmospheres Regulations 2002; HSE EH40/2005 Workplace exposure limits; HSE WIS23 Wood dust: Controlling the risks

Which Northern Ireland duties apply?

Source: wood-dust--ni-law

Northern Ireland uses the separate COSHH Regulations NI 2003 for health risk and DSEAR Regulations NI 2003 for relevant fire and explosion risk; use HSENI guidance and verify the current NI legal and exposure-limit route. HSENI woodworking guidance expects effective extraction, regular checks and testing, training, suitable RPE and consideration of health surveillance. HSE material can be useful technical guidance when its GB legal wording and dates are not silently transferred to NI. Sources: Control of Substances Hazardous to Health Regulations Northern Ireland 2003; Dangerous Substances and Explosive Atmospheres Regulations Northern Ireland 2003; HSENI Woodworking

What evidence should management sample?

Source: wood-dust--assurance

Trace real tasks from material identification and method choice through capture, RPE, cleaning, symptoms, defects and fire/explosion controls to verified action closeout and authorised release. Sample sanding and cleaning, not only tidy daytime demonstrations. Compare user airflow checks with commissioning and TExT results. Check whether monitoring represented difficult work, whether health trends improved controls, and whether dust-collector modifications received both COSHH and DSEAR review. Task assessment. Failure signal: Generic wood-dust paragraph with no material or people. LEV lifecycle. Failure signal: Test label but no user benchmark or defect closure. RPE programme. Failure signal: Boxes of masks with no fit or wearer check. Health feedback. Failure signal: Symptoms hidden or treated as fitness discipline. Combustible dust. Failure signal: Housekeeping score but no process/collector basis.

Visible dust escape, dusty clothing, deposits on high surfaces, repeated low-flow indications, blocked hoses, full collectors, damaged masks, new symptoms, dry sweeping, compressed-air cleaning, hot smells, sparks and overdue actions all require attention. One clean floor or below-WEL result does not cancel weak signals elsewhere. Look for workarounds: detached hoods, propped doors, RPE worn under facial hair, collector alarms reset, leaks taped repeatedly, or production continuing through an unverified fault. Dust beyond source. Why it matters: Capture or enclosure failed.; Response: Hold and correct method/LEV. Repeated blockage or taped hose. Why it matters: System and maintenance weakness.; Response: Repair and review design. Symptoms in several people. Why it matters: Possible shared exposure failure.; Response: OH and control investigation. Heat, smoke or sparks.

Why it matters: Potential collector or duct event.; Response: Alarm and emergency route. Dust layer returning quickly. Why it matters: Generation and cleaning strategy inadequate.; Response: Find source and reassess. Sources: HSE WIS23 Wood dust: Controlling the risks PDF; HSE LEV frequently asked questions; HSE Health surveillance overview; HSE HSG103 Safe handling of combustible dusts; HSE INDG408 Clearing the air

How do wood-dust decisions work in the field?

Source: wood-dust--operational-examples

Six fictional BuildOut scenario summaries identify holds and release owners; panel-saw cutting and fit-out sanding are developed below into two full worked examples with starting conditions, stop points, evidence and named release authority. Source basis: HSE Construction dust: Cutting and sanding wood · HSENI Woodworking · HSE HSG103 Safe handling of combustible dusts · HSE INDG408 Clearing the air · HSE WIS23 Wood dust: Controlling the risks · HSE WIS23 Wood dust: Controlling the risks PDF. Fictional BuildOut links each wood-processing task to material identity, lower-dust method, extraction benchmark, RPE and cleaning plan, then keeps combustible-dust and emergency decisions as a separate specialist stream. Purchasing obtains task-compatible tools and extraction. Supervisors control area occupancy and release work. Users check capture and report symptoms or defects.

Maintenance restores and tests systems. Occupational health reports control themes without unnecessary clinical details. DSEAR specialists review collectors, conveying, modifications and ignition controls. Project planning. BuildOut practice: Pre-cut and segregate dusty work.; Evidence: Method and programme decision. Workshop/site supervisor. BuildOut practice: Pre-use gate and stop/release authority.; Evidence: Task log and hand-back. Maintenance/LEV specialist. BuildOut practice: Benchmark, repair, TExT and recommissioning.; Evidence: Accepted performance record. OH and DSEAR specialists. BuildOut practice: Health feedback and combustible-dust basis.; Evidence: Advice, actions and approvals. They are training examples, not approved RAMS, exposure estimates, RPE selections or emergency procedures. The actual task, material, equipment, worker, building, fire strategy and jurisdiction determine the action. Workshop saw. Primary hold: No capture or unknown material.; Release owner: Workshop supervisor. Fit-out sanding.

Primary hold: Dust escapes or area is occupied.; Release owner: Site supervisor. Failed airflow indicator. Primary hold: LEV performance uncertain.; Release owner: Supervisor after competent check. Collector emptying. Primary hold: Unsafe internal condition or containment.; Release owner: Maintenance/operations owner. Reclaimed timber contractor. Primary hold: Coating or contaminant unknown.; Release owner: Host and contractor supervisors. Collector smoke. Primary hold: No approach, opening or restart.; Release owner: Incident command then recovery owner. Other interfaces: Stop cutting when a collector loses airflow or leaks dust; isolate the system before clearing a blockage or opening a filter housing; and agree dust, ignition and cleaning controls with contractors before maintenance or hot work. Restart only after capture, housekeeping and the work area have been checked.

Sources: HSE WIS23 Wood dust: Controlling the risks; HSE INDG408 Clearing the air; HSENI Woodworking; HSE HSG103 Safe handling of combustible dusts; HSE WIS23 Wood dust: Controlling the risks PDF

Acronyms and terms

Source: wood-dust--terms

Use these terms consistently when assessing inhalation, combustible-dust risk, extraction and respiratory protection. Sources: HSE EH40/2005 Workplace exposure limits; HSE LEV frequently asked questions; HSE Respiratory protective equipment FAQs; HSE HSG103 Safe handling of combustible dusts

Routine panel-saw cutting with fixed extraction

Source: wood-dust--example--workshop-panel-saw

Task Material And Setting: Before using the panel saw, identify the board, complete health and fire/explosion screening, confirm the accepted LEV benchmark, start extraction before the tool, don assessed RPE before dust and prepare at least Class M or assessed LEV suction-hose cleaning. Stop for unknown material, low flow, escape, collector defect, lost fit or intrusion. The workshop supervisor releases the task only after material, capture, cleaning and applicable fire-control evidence is accepted. People And Prerequisites: Authorised saw user and workshop supervisor; current COSHH assessment, guarded machine, commissioned LEV benchmark, cleaning route and task-selected RPE where required.

Before: Confirm board identity and work plan, inspect hood and connections, compare the airflow indicator with its accepted range, check collector capacity and keep bystanders outside the dusty zone. During: Start extraction before cutting, keep capture components in position and watch for escape at the cut and operator breathing zone. Hold Or Stop: Stop for unknown board, low flow, blockage, damaged hood, visible escape, full/leaking collector, RPE failure or someone entering the controlled area. Completion And Hand Back: Stop the saw, follow the planned clearance, vacuum surfaces with suitable equipment, contain waste and leave the LEV and area in their defined condition. Evidence: Material/task check, user LEV check, any defect action, cleaning record and supervisor release. Source boundary: Fictional operational example.

Apply current GB or NI COSHH and DSEAR authority according to location, then use actual material, task, plant, emergency, verification and named release evidence.

Construction fit-out sanding in a partly enclosed room

Source: wood-dust--example--fitout-sanding

Task Material And Setting: Before sanding MDF in the occupied fit-out, confirm board and coating, segregate the room, connect and verify on-tool extraction, and don fit-tested compatible RPE before dust. Keep it on through assessed clearance and at least Class M cleaning until outside contaminated air. Stop for dust escape, disconnection, poor seal, changed conditions or entry; the site supervisor signs release after control, cleaning and occupancy evidence. People And Prerequisites: Trained worker, site supervisor and affected trades; lower-dust method considered, compatible on-tool extraction, suitable industrial vacuum, selected RPE and area segregation. Before: Confirm the board and finish, remove or protect nearby occupants, connect secure extraction, inspect hose/filter/collector, check tight-fitting RPE fit and plan waste handling.

During: Keep extraction running and the pad connected, work within the controlled zone, pause to vacuum deposits and reassess if duration, enclosure or occupancy changes. Hold Or Stop: Stop for dust haze or visible escape, disconnection, blocked filter, poor face seal, heat stress, unplanned entry or work continuing beyond the assessed condition. Completion And Hand Back: Stop generation, maintain protection through planned clean-up, vacuum the room and equipment, contain waste and release only after inspection. Evidence: Task briefing, extraction/RPE checks, occupancy control, changed-condition decision and signed area hand-back. Source boundary: Fictional operational example. Apply current GB or NI COSHH and DSEAR authority according to location, then use actual material, task, plant, emergency, verification and named release evidence.

What is occupational lung cancer?
What is occupational lung cancer?

Source: lung-cancer-occupational--core

Occupational lung cancer is lung cancer where workplace carcinogen exposure caused or materially contributed to disease risk. Lung cancer is a medical condition that must be diagnosed and treated by clinicians. The workplace focus is prevention and exposure history. Occupational lung cancer usually has a long latency period, meaning the cancer may appear many years after exposure. This is why records, exposure control and historical work information matter even when nobody is ill today. Smoking is a major cause of lung cancer in the general population, but that must not be used to dismiss occupational exposure. Workplace carcinogens can independently increase risk and can interact with smoking. A serious employer controls carcinogens at source and does not shift attention onto worker lifestyle.

The main workplace learning point is exposure pathway thinking: a carcinogen is generated or disturbed; it becomes airborne as fibre, dust, fume, gas or exhaust; a worker inhales it; controls are absent, weak or not used; exposure accumulates or repeats; disease may develop years later. Prevention is about breaking that pathway early and proving the controls stay effective. For a non-dust pathway such as accumulated radioactive gas, see HSE radon-in-workplaces guidance. For Northern Ireland radon work, check the HSENI measurement and notification route alongside the local risk assessment. All welding fume, including mild-steel welding fume, can cause lung cancer. Stainless-specific metal hazards add to the assessment; they do not limit the broader welding-fume control duty.

What medical boundary should be visible?

Source: lung-cancer-occupational--health-boundary

Symptoms or past exposure need clinical assessment, while work controls continue immediately. NHS lung-cancer symptoms guidance lists persistent cough, coughing blood, breathlessness, chest pain and weight loss as reasons for medical review. A manager should help a worker seek GP/NHS advice and use the workplace emergency procedure if acutely unwell; managers must not diagnose or reassure from an exposure record. HSE asbestos guidance notes that disease may take decades to appear. Preserve the real task and exposure history, review current controls and share relevant records through appropriate occupational-health channels. Smoking and other causes do not excuse uncontrolled workplace exposure or establish individual causation. The NHS symptom guidance directs coughing up blood to urgent GP or local urgent-care service.

Struggling to breathe, or chest or upper-back pain, requires 999 or A&E. The workplace should help access the appropriate route without making a diagnosis. For urgent non-emergency advice, follow the service for the reader’s location: NHS 111 in England, or a local GP, out-of-hours or Phone First route in Northern Ireland. Elsewhere use the local urgent-care route. Call 999 for an emergency. For Northern Ireland, nidirect coughing-up-blood guidance directs significant bleeding, especially with breathing difficulty, to emergency help; use 999 or the emergency department. This is distinct from small amounts requiring prompt urgent clinical advice.

How can the hierarchy of controls reduce exposure to occupational lung carcinogens?

Source: lung-cancer-occupational--application

Control the actual carcinogenic agent and prove the barrier works. HSE asbestos guidance links disturbed fibres to lung cancer; HSE silica guidance covers cutting/grinding mineral materials; HSE diesel-exhaust guidance covers repeated exhaust exposure; and HSE welding guidance identifies welding fume as a lung-cancer hazard. Select controls for the agent and task rather than assuming one dust mask protects all processes. HSE COSHH exposure-limit guidance says carcinogen exposure must be reduced as low as reasonably practicable even when a workplace exposure limit is met. Before refurbishment, check asbestos information and identify the material. Suspected or confirmed asbestos means stop disturbance and obtain an asbestos-specific assessment, work category and competent plan under the asbestos regulations.

For confirmed non-asbestos silica-bearing material, redesign to avoid cutting or use suitable wet/on-tool extraction, segregate others, verify performance and select fit-tested respiratory protection for residual risk. A stopped water feed or failed extraction holds work. The five-level hierarchy and ERICPD (Eliminate, Reduce, Isolate, Control, Personal protective equipment and Discipline) guide control selection and sustained checks.

How do exposure pathways differ by agent?

Source: lung-cancer-occupational--exposure-pathways

Each carcinogen needs controls matched to its form, task and route into the body. Each carcinogen needs controls matched to its form, task and route into the body. The table gives practical examples, evidence expectations and common decision points so the section can be used for learning, supervision, audit and review. For Northern Ireland radon work, check the HSENI measurement and notification route alongside the local risk assessment.

Which occupational lung cancer exposures need the strongest control evidence?

Source: lung-cancer-occupational--exposure-matrix

A matrix helps learners connect agent, task, route, controls and records. A lung-cancer prevention page has to do more than list carcinogens. Learners and managers need to see the work route: where the agent comes from, how it becomes airborne, who is exposed, which control should break the pathway and what record proves the control was in place. That is especially important because lung cancer can appear decades after exposure. Health surveillance may be required for some related respiratory or hazardous-substance risks, but it is not a lung-cancer diagnosis programme. Symptoms and clinical concerns must go through NHS or GP routes. Workplace records should focus on exposure, controls, monitoring, health surveillance decisions and evidence that defects were closed.

HSE health-surveillance record guidance distinguishes an employer-held health record from medical-in-confidence records held by the occupational-health professional. Whether surveillance is required depends on the hazard and applicable regulations; it is not a routine lung-cancer screening programme. For Northern Ireland radon work, check the HSENI measurement and notification route alongside the local risk assessment.

Why do latency and exposure records matter so much?

Source: lung-cancer-occupational--latency-records

Current carcinogen exposure may create disease risk many years later, so evidence must outlast the job. Occupational lung cancer is a long-latency risk. The harmful exposure may happen today, while disease may not become visible for many years. That time gap is why competent organisations do not treat a clean injury record as proof that carcinogen control is working. If workers are breathing asbestos fibres, silica dust, diesel exhaust or carcinogenic fume now, the absence of immediate illness is not reassurance. Records matter because future questions may need past evidence: what material was disturbed, what method was used, who was exposed, what controls were in place, whether monitoring was done, whether health surveillance was required, and whether defects were closed.

Health surveillance can help detect work-related health effects in some exposure programmes, but it is not a substitute for exposure prevention and it is not a cancer diagnosis route. Where COSHH health surveillance is required, the employer-held health record is kept for the period specified by the regulation, commonly 40 years under COSHH, as HSE explains. That period is not a blanket retention rule for every task note or exposure file. Clinical medical records remain with the responsible health professional and require the worker’s written consent for employer access.

How could a refurbishment job create lung cancer risk?

Source: lung-cancer-occupational--worked-example

Before refurbishment, the supervisor checks the asbestos register and surveys against the exact material and work area. If asbestos is suspected or confirmed, work stops pending asbestos-specific assessment, category and a competent plan. Only after a material is confirmed non-asbestos does the silica/dust method branch consider wet cutting or on-tool extraction under COSHH; the next shift verifies controls and holds work on failure.

What evidence shows occupational lung cancer risk is controlled?

Source: lung-cancer-occupational--evidence

Evidence should prove exposure is prevented or reduced and that controls work in the field. For a real refurbishment task, retain material identification, asbestos information, method selection, extraction/wet-control check, exclusion, RPE fit record where needed, exposure monitoring and defect close-out. A clean appearance or a result below a WEL does not prove carcinogen control is sufficient. TExT means thorough examination and test: periodic competent examination is distinct from the operator’s pre-use check. For welding, the operator checks actual capture, hood position and the relevant operating indicator, reports defects and holds work after failure. A current test label or airflow reading alone does not prove capture at the real task.

Select a suitable alternative that does not rely on a tight face seal where necessary; keep protection, compatibility and training appropriate and preserve source controls.

Which legal duties apply to occupational lung cancer prevention?

Source: lung-cancer-occupational--legal-duties

Use the reporting, handling or exposure instrument for the actual location and task. Great Britain and Northern Ireland have distinct instruments. The same work question may have different reporting thresholds or duty wording, so the site must check its own jurisdiction before making a legal claim. Radon is an ionising-radiation route, separate from the COSHH/asbestos rows above. For Northern Ireland, HSENI explains the NI 2017 notification route: an annual-average workplace concentration above 300 Bq/m³ requires notification, with measurement included in a risk assessment for below-ground workplaces or radon-affected areas. Use the separate HSE radon guidance for Great Britain. Occupational disease reporting is a separate decision from preventing exposure.

In Great Britain, HSE’s RIDDOR cancer guidance requires a diagnosed cancer with an established causal link to significant work-carcinogen exposure; it says the person’s current job must involve the relevant hazard, so a retired former-asbestos-worker example is not reportable on that route. Do not assume every lung-cancer diagnosis or historical exposure is reportable. In Northern Ireland, use the separate 1997 Reporting of Injuries, Diseases and Dangerous Occurrences Regulations route with HSENI occupational-cancer guidance and competent advice on the diagnosis and work link. Preserve historical exposure evidence even where a present reporting duty does not arise.

How should controls be owned and reviewed?
How should controls be owned and reviewed?

Source: lung-cancer-occupational--iso

Assign a competent owner, check that task controls work, involve workers and act when evidence changes. For Lung cancer (occupational), record the actual hazard and task, the chosen control, the person responsible, the evidence that it works and the point at which work must stop or be reassessed. HSE management guidance for Great Britain describes planning, worker consultation, checking and action. HSENI guidance for Northern Ireland describes competent help, risk control and review. These management steps do not prove that a particular task control is suitable; use the topic-specific evidence and the applicable GB or NI law elsewhere on this page.

What training is needed?

Source: lung-cancer-occupational--training

Carcinogen competence is agent and task specific, with clear stop and restart authority. Use two separate observed decisions. For confirmed non-asbestos silica cutting, the operator explains the material check, demonstrates the water or extraction pre-use test and stops the cut if the control fails; the supervisor records the method, observed check and authorised restart after a competent repair. For work that may disturb unknown building fabric, the worker stops and obtains asbestos information before choosing any cutting method. An assessor tests both decisions on the real tasks and repeats the assessment when material, tool, control or work location changes. HSE silica guidance and HSE asbestos worker guidance support these distinct stop routes; a general awareness certificate does not authorise asbestos work.

How could BuildOut Ltd manage this in practice?

Source: lung-cancer-occupational--business-example

BuildOut would manage occupational lung cancer risk through pre-work information, dust controls, competent contractors and exposure evidence. In refurbishment and construction, lung cancer prevention is won before the saw, grinder or drill starts. BuildOut would plan around asbestos surveys, silica-containing materials, diesel plant, welding fume, RPE, extraction, welfare, cleaning and worker understanding.

Source tables and records 1
Examples of awareness messages

Table ID: cancer-awareness-examples-of-awareness-messages

Source: https://www.sharehub.ltd/knowledge-hub/cancer-awareness.html

Row 1

Area

New lump or swelling

Plain language message

A new lump or swelling should be checked.

Workplace boundary

Signpost; do not inspect or assess.

Row 2

Area

Unusual bleeding

Plain language message

Bleeding that is not normal for the person should be checked.

Workplace boundary

Support privacy and time for appointments.

Row 3

Area

Persistent cough or breathlessness

Plain language message

A cough, breathlessness or coughing blood should be discussed with healthcare professionals.

Workplace boundary

Consider occupational exposure history if relevant.

Row 4

Area

Skin changes

Plain language message

A new mole, changing mole or sore that does not heal should be checked.

Workplace boundary

Outdoor workers also need UV protection controls.

Row 5

Area

Bowel or bladder changes

Plain language message

Persistent changes in bowel or bladder habit should be checked.

Workplace boundary

Support dignity and confidentiality.

Row 6

Area

Unexplained weight loss or fatigue

Plain language message

Unexplained changes should not be ignored.

Workplace boundary

Encourage health advice; do not infer performance issues.

Read the complete comparison table
Examples of awareness messages
RowAreaPlain language messageWorkplace boundary
1New lump or swellingA new lump or swelling should be checked.Signpost; do not inspect or assess.
2Unusual bleedingBleeding that is not normal for the person should be checked.Support privacy and time for appointments.
3Persistent cough or breathlessnessA cough, breathlessness or coughing blood should be discussed with healthcare professionals.Consider occupational exposure history if relevant.
4Skin changesA new mole, changing mole or sore that does not heal should be checked.Outdoor workers also need UV protection controls.
5Bowel or bladder changesPersistent changes in bowel or bladder habit should be checked.Support dignity and confidentiality.
6Unexplained weight loss or fatigueUnexplained changes should not be ignored.Encourage health advice; do not infer performance issues.
NHS screening awareness points

Table ID: cancer-awareness-nhs-screening-awareness-points

Source: https://www.sharehub.ltd/knowledge-hub/cancer-awareness.html

Row 1

Screening topic

Cervical screening

What workers should understand

Offered to eligible people with a cervix to check cervical cell health.

Employer role

Permit private time and signpost to NHS information.

Row 2

Screening topic

Breast screening

What workers should understand

Offered to eligible women and some people can self-refer after the routine age range.

Employer role

Support appointment attendance and privacy.

Row 3

Screening topic

Bowel screening

What workers should understand

Uses home test kits for eligible age groups.

Employer role

Use campaign reminders without collecting results.

Row 4

Screening topic

Lung cancer screening

What workers should understand

Currently available for eligible people in some parts of England; check the NHS lung screening guide and local eligibility.

Employer role

Signpost; also control workplace respiratory carcinogens.

Row 5

Screening topic

Devolved routes

What workers should understand

England, Scotland, Wales and Northern Ireland can implement screening differently.

Employer role

Use current NHS or public-health pages for the relevant country.

Row 6

Screening topic

Private screening

What workers should understand

Private tests may not be recommended by the UK NSC.

Employer role

Avoid promoting unvalidated tests as workplace benefit.

Read the complete comparison table
NHS screening awareness points
RowScreening topicWhat workers should understandEmployer role
1Cervical screeningOffered to eligible people with a cervix to check cervical cell health.Permit private time and signpost to NHS information.
2Breast screeningOffered to eligible women and some people can self-refer after the routine age range.Support appointment attendance and privacy.
3Bowel screeningUses home test kits for eligible age groups.Use campaign reminders without collecting results.
4Lung cancer screeningCurrently available for eligible people in some parts of England; check the NHS lung screening guide and local eligibility.Signpost; also control workplace respiratory carcinogens.
5Devolved routesEngland, Scotland, Wales and Northern Ireland can implement screening differently.Use current NHS or public-health pages for the relevant country.
6Private screeningPrivate tests may not be recommended by the UK NSC.Avoid promoting unvalidated tests as workplace benefit.
Source comparison

Table ID: cancer-awareness-ericpd

Source: https://www.sharehub.ltd/knowledge-hub/cancer-awareness.html

Row 1

Column 1

Eliminate

Column 2

Use preformed openings or a fixing design that avoids on-site drilling where feasible.Basis: HSE cancer and construction: silica · Official task guidance: www.hse.gov.uk

Column 3

Task owner verifies that the proposed change removes the named hazardous step, including foreseeable cleaning, maintenance and work transferred elsewhere.

Column 4

If the hazardous step remains, keep it within the task assessment and select the stronger feasible remaining controls.

Row 2

Column 1

Reduce, including substitution

Column 2

Consider a suitable lower-dust fixing or installation method and check the new structural and access risks.Basis: HSE cancer and construction: silica · Official task guidance: www.hse.gov.uk

Column 3

Competent task/process owner validates suitability, compatibility and new hazards against the actual operating requirements before the alternative is adopted.

Column 4

Reject an alternative if its performance is unproved or its new hazards are unresolved.

Row 3

Column 1

Isolate

Column 2

Separate drilling from other trades and protect people downwind or in adjacent occupied areas.Basis: HSE cancer and construction: silica · Official task guidance: www.hse.gov.uk

Column 3

Supervisor checks the actual boundary, affected people and connected work; verify separation or isolation before allowing access.

Column 4

Hold or stop for untested tight-fitting model, poor seal, failed extraction or changed material.

Row 4

Column 1

Control: physical safeguards

Column 2

Use effective compatible on-tool extraction or an approved wet method; verify dust control at the drill point.Basis: HSE cancer and construction: silica · Official task guidance: www.hse.gov.uk

Column 3

Competent equipment/process owner checks material identity, source control, required protection and exact facepiece/fit-test match.

Column 4

Hold or stop for untested tight-fitting model, poor seal, failed extraction or changed material.

Row 5

Column 1

Control: work method and response

Column 2

Select adequate and suitable RPE for the task; obtain the correct fit-tested model or a suitable assessed alternative before release.Basis: HSE cancer and construction: silica · Official task guidance: www.hse.gov.uk

Column 3

Supervisor confirms the work limits, competent cover, communication and stop/restart authority with the people doing this activity.

Column 4

Hold work when the agreed limits, competent cover or effective communication cannot be maintained.

Row 6

Column 1

PPE

Column 2

Check facepiece model/size, fit-test evidence, seal and compatibility with eye/hearing protection; complete pre-use checks.Basis: HSE cancer and construction: silica · Official task guidance: www.hse.gov.uk

Column 3

Assessor confirms whether personal protection is needed and checks suitability, condition, compatibility and any required fit evidence.

Column 4

Do not use unsuitable protection or rely on PPE to continue after an essential source control fails.

Row 7

Column 1

Discipline

Column 2

Review fit after relevant changes and replace damaged equipment; failed source control requires a task hold, not a mask swap.Basis: HSE cancer and construction: silica · Official task guidance: www.hse.gov.uk

Column 3

Release only after supervisor confirms suitable source control and RPE before drilling. Retain verification and unresolved restrictions at handover.

Column 4

Keep the task on hold until required reinstatement evidence and unresolved defects are accepted by the responsible owner.

Read the complete comparison table
Source comparison
RowColumn 1Column 2Column 3Column 4
1EliminateUse preformed openings or a fixing design that avoids on-site drilling where feasible.Basis: HSE cancer and construction: silica · Official task guidance: www.hse.gov.ukTask owner verifies that the proposed change removes the named hazardous step, including foreseeable cleaning, maintenance and work transferred elsewhere.If the hazardous step remains, keep it within the task assessment and select the stronger feasible remaining controls.
2Reduce, including substitutionConsider a suitable lower-dust fixing or installation method and check the new structural and access risks.Basis: HSE cancer and construction: silica · Official task guidance: www.hse.gov.ukCompetent task/process owner validates suitability, compatibility and new hazards against the actual operating requirements before the alternative is adopted.Reject an alternative if its performance is unproved or its new hazards are unresolved.
3IsolateSeparate drilling from other trades and protect people downwind or in adjacent occupied areas.Basis: HSE cancer and construction: silica · Official task guidance: www.hse.gov.ukSupervisor checks the actual boundary, affected people and connected work; verify separation or isolation before allowing access.Hold or stop for untested tight-fitting model, poor seal, failed extraction or changed material.
4Control: physical safeguardsUse effective compatible on-tool extraction or an approved wet method; verify dust control at the drill point.Basis: HSE cancer and construction: silica · Official task guidance: www.hse.gov.ukCompetent equipment/process owner checks material identity, source control, required protection and exact facepiece/fit-test match.Hold or stop for untested tight-fitting model, poor seal, failed extraction or changed material.
5Control: work method and responseSelect adequate and suitable RPE for the task; obtain the correct fit-tested model or a suitable assessed alternative before release.Basis: HSE cancer and construction: silica · Official task guidance: www.hse.gov.ukSupervisor confirms the work limits, competent cover, communication and stop/restart authority with the people doing this activity.Hold work when the agreed limits, competent cover or effective communication cannot be maintained.
6PPECheck facepiece model/size, fit-test evidence, seal and compatibility with eye/hearing protection; complete pre-use checks.Basis: HSE cancer and construction: silica · Official task guidance: www.hse.gov.ukAssessor confirms whether personal protection is needed and checks suitability, condition, compatibility and any required fit evidence.Do not use unsuitable protection or rely on PPE to continue after an essential source control fails.
7DisciplineReview fit after relevant changes and replace damaged equipment; failed source control requires a task hold, not a mask swap.Basis: HSE cancer and construction: silica · Official task guidance: www.hse.gov.ukRelease only after supervisor confirms suitable source control and RPE before drilling. Retain verification and unresolved restrictions at handover.Keep the task on hold until required reinstatement evidence and unresolved defects are accepted by the responsible owner.
Source comparison

Table ID: cancer-awareness-ericpd-eseap

Source: https://www.sharehub.ltd/knowledge-hub/cancer-awareness.html

Row 1

Column 1

Elimination

Column 2

Use preformed openings or a fixing design that avoids on-site drilling where feasible.Basis: HSE cancer and construction: silica · Official task guidance: www.hse.gov.uk

Column 3

Task owner verifies that the proposed change removes the named hazardous step, including foreseeable cleaning, maintenance and work transferred elsewhere.

Column 4

If the hazardous step remains, keep it within the task assessment and select the stronger feasible remaining controls.

Row 2

Column 1

Substitution

Column 2

Consider a suitable lower-dust fixing or installation method and check the new structural and access risks.Basis: HSE cancer and construction: silica · Official task guidance: www.hse.gov.uk

Column 3

Competent task/process owner validates suitability, compatibility and new hazards against the actual operating requirements before the alternative is adopted.

Column 4

Reject an alternative if its performance is unproved or its new hazards are unresolved.

Row 3

Column 1

Engineering controls

Column 2

Separate drilling from other trades and protect people downwind or in adjacent occupied areas.Basis: HSE cancer and construction: silica · Official task guidance: www.hse.gov.uk

Column 3

Supervisor checks the actual boundary, affected people and connected work; verify separation or isolation before allowing access.

Column 4

Hold or stop for untested tight-fitting model, poor seal, failed extraction or changed material.

Row 4

Column 1

Engineering controls

Column 2

Use effective compatible on-tool extraction or an approved wet method; verify dust control at the drill point.Basis: HSE cancer and construction: silica · Official task guidance: www.hse.gov.uk

Column 3

Competent equipment/process owner checks material identity, source control, required protection and exact facepiece/fit-test match.

Column 4

Hold or stop for untested tight-fitting model, poor seal, failed extraction or changed material.

Row 5

Column 1

Administrative controls

Column 2

Select adequate and suitable RPE for the task; obtain the correct fit-tested model or a suitable assessed alternative before release.Basis: HSE cancer and construction: silica · Official task guidance: www.hse.gov.uk

Column 3

Supervisor confirms the work limits, competent cover, communication and stop/restart authority with the people doing this activity.

Column 4

Hold work when the agreed limits, competent cover or effective communication cannot be maintained.

Row 6

Column 1

PPE

Column 2

Check facepiece model/size, fit-test evidence, seal and compatibility with eye/hearing protection; complete pre-use checks.Basis: HSE cancer and construction: silica · Official task guidance: www.hse.gov.uk

Column 3

Assessor confirms whether personal protection is needed and checks suitability, condition, compatibility and any required fit evidence.

Column 4

Do not use unsuitable protection or rely on PPE to continue after an essential source control fails.

Row 7

Column 1

Administrative controls

Column 2

Review fit after relevant changes and replace damaged equipment; failed source control requires a task hold, not a mask swap.Basis: HSE cancer and construction: silica · Official task guidance: www.hse.gov.uk

Column 3

Release only after supervisor confirms suitable source control and RPE before drilling. Retain verification and unresolved restrictions at handover.

Column 4

Keep the task on hold until required reinstatement evidence and unresolved defects are accepted by the responsible owner.

Read the complete comparison table
Source comparison
RowColumn 1Column 2Column 3Column 4
1EliminationUse preformed openings or a fixing design that avoids on-site drilling where feasible.Basis: HSE cancer and construction: silica · Official task guidance: www.hse.gov.ukTask owner verifies that the proposed change removes the named hazardous step, including foreseeable cleaning, maintenance and work transferred elsewhere.If the hazardous step remains, keep it within the task assessment and select the stronger feasible remaining controls.
2SubstitutionConsider a suitable lower-dust fixing or installation method and check the new structural and access risks.Basis: HSE cancer and construction: silica · Official task guidance: www.hse.gov.ukCompetent task/process owner validates suitability, compatibility and new hazards against the actual operating requirements before the alternative is adopted.Reject an alternative if its performance is unproved or its new hazards are unresolved.
3Engineering controlsSeparate drilling from other trades and protect people downwind or in adjacent occupied areas.Basis: HSE cancer and construction: silica · Official task guidance: www.hse.gov.ukSupervisor checks the actual boundary, affected people and connected work; verify separation or isolation before allowing access.Hold or stop for untested tight-fitting model, poor seal, failed extraction or changed material.
4Engineering controlsUse effective compatible on-tool extraction or an approved wet method; verify dust control at the drill point.Basis: HSE cancer and construction: silica · Official task guidance: www.hse.gov.ukCompetent equipment/process owner checks material identity, source control, required protection and exact facepiece/fit-test match.Hold or stop for untested tight-fitting model, poor seal, failed extraction or changed material.
5Administrative controlsSelect adequate and suitable RPE for the task; obtain the correct fit-tested model or a suitable assessed alternative before release.Basis: HSE cancer and construction: silica · Official task guidance: www.hse.gov.ukSupervisor confirms the work limits, competent cover, communication and stop/restart authority with the people doing this activity.Hold work when the agreed limits, competent cover or effective communication cannot be maintained.
6PPECheck facepiece model/size, fit-test evidence, seal and compatibility with eye/hearing protection; complete pre-use checks.Basis: HSE cancer and construction: silica · Official task guidance: www.hse.gov.ukAssessor confirms whether personal protection is needed and checks suitability, condition, compatibility and any required fit evidence.Do not use unsuitable protection or rely on PPE to continue after an essential source control fails.
7Administrative controlsReview fit after relevant changes and replace damaged equipment; failed source control requires a task hold, not a mask swap.Basis: HSE cancer and construction: silica · Official task guidance: www.hse.gov.ukRelease only after supervisor confirms suitable source control and RPE before drilling. Retain verification and unresolved restrictions at handover.Keep the task on hold until required reinstatement evidence and unresolved defects are accepted by the responsible owner.
Campaign planning checklist

Table ID: cancer-awareness-campaign-planning-checklist

Source: https://www.sharehub.ltd/knowledge-hub/cancer-awareness.html

Row 1

Campaign element

Purpose

What good looks like

One clear campaign goal and audience.

Evidence

Campaign brief.

Row 2

Campaign element

Accuracy

What good looks like

NHS, GOV.UK, HSE or recognised cancer charity sources used.

Evidence

Source list and review date.

Row 3

Campaign element

Tone

What good looks like

Calm, supportive and non-alarming.

Evidence

Reviewed wording.

Row 4

Campaign element

Accessibility

What good looks like

Plain English, readable formats and inclusive images.

Evidence

Accessibility check.

Row 5

Campaign element

Signposting

What good looks like

Clear routes to NHS advice, screening, OH, HR or H&S reporting.

Evidence

Poster, intranet and manager pack.

Row 6

Campaign element

Confidentiality

What good looks like

Explains that health disclosures are private.

Evidence

Manager guidance and privacy reminder.

Row 7

Campaign element

Action tracking

What good looks like

Campaign reach and follow-up actions reviewed.

Evidence

Evaluation report.

Read the complete comparison table
Campaign planning checklist
RowCampaign elementWhat good looks likeEvidence
1PurposeOne clear campaign goal and audience.Campaign brief.
2AccuracyNHS, GOV.UK, HSE or recognised cancer charity sources used.Source list and review date.
3ToneCalm, supportive and non-alarming.Reviewed wording.
4AccessibilityPlain English, readable formats and inclusive images.Accessibility check.
5SignpostingClear routes to NHS advice, screening, OH, HR or H&S reporting.Poster, intranet and manager pack.
6ConfidentialityExplains that health disclosures are private.Manager guidance and privacy reminder.
7Action trackingCampaign reach and follow-up actions reviewed.Evaluation report.
Example harm chains and safe actions

Table ID: cancer-awareness-harm-chains

Source: https://www.sharehub.ltd/knowledge-hub/cancer-awareness.html

Row 1

Column-1

Joinery: machining hard wood; airborne dust enters nose and airways.

Column-2

Nasal cancer risk; capture dust at the machine, clean without raising dust, assess residual protection.

Column-3

Stop on failed extraction; check capture at the point of release and maintenance records.

Row 2

Column-1

Construction: cutting concrete; respirable silica reaches lungs.

Column-2

Long-latency lung cancer risk; redesign the cut, use on-tool extraction or water suppression and task-matched RPE.

Column-3

Stop if suppression or extraction fails; verify the chosen system against the actual material and cut.

Row 3

Column-1

Warehouse or tunnel: diesel plant emits exhaust that workers breathe.

Column-2

Long-term lung cancer risk; avoid unnecessary engines, segregate plant and ventilate.

Column-3

Stop avoidable idling in enclosed space; check airflow and plant condition.

Row 4

Column-1

Outdoor leisure or construction: solar UV reaches exposed skin.

Column-2

Skin damage and later skin cancer risk; plan shade, timing, clothing and sunscreen as part of the work system.

Column-3

Review when shade or clothing is unavailable, heat rises, or the task changes.

Read the complete comparison table
Example harm chains and safe actions
RowColumn-1Column-2Column-3
1Joinery: machining hard wood; airborne dust enters nose and airways.Nasal cancer risk; capture dust at the machine, clean without raising dust, assess residual protection.Stop on failed extraction; check capture at the point of release and maintenance records.
2Construction: cutting concrete; respirable silica reaches lungs.Long-latency lung cancer risk; redesign the cut, use on-tool extraction or water suppression and task-matched RPE.Stop if suppression or extraction fails; verify the chosen system against the actual material and cut.
3Warehouse or tunnel: diesel plant emits exhaust that workers breathe.Long-term lung cancer risk; avoid unnecessary engines, segregate plant and ventilate.Stop avoidable idling in enclosed space; check airflow and plant condition.
4Outdoor leisure or construction: solar UV reaches exposed skin.Skin damage and later skin cancer risk; plan shade, timing, clothing and sunscreen as part of the work system.Review when shade or clothing is unavailable, heat rises, or the task changes.
Confidentiality controls for awareness activity

Table ID: cancer-awareness-confidentiality-controls-for-awareness-activity

Source: https://www.sharehub.ltd/knowledge-hub/cancer-awareness.html

Row 1

Risk

Over-collecting health details

Control

Use anonymous feedback unless individual support is requested.

Evidence

Survey design review.

Row 2

Risk

Manager curiosity

Control

Train managers to signpost rather than ask clinical questions.

Evidence

Manager briefing record.

Row 3

Risk

Public disclosure

Control

Agree communication before sharing any personal story.

Evidence

Written consent and agreed wording.

Row 4

Risk

Screening-result requests

Control

Do not ask for results unless there is a specific lawful work reason.

Evidence

Privacy and HR guidance.

Row 5

Risk

Poor record access

Control

Restrict health information access to those with a need to know.

Evidence

Access controls and retention schedule.

Read the complete comparison table
Confidentiality controls for awareness activity
RowRiskControlEvidence
1Over-collecting health detailsUse anonymous feedback unless individual support is requested.Survey design review.
2Manager curiosityTrain managers to signpost rather than ask clinical questions.Manager briefing record.
3Public disclosureAgree communication before sharing any personal story.Written consent and agreed wording.
4Screening-result requestsDo not ask for results unless there is a specific lawful work reason.Privacy and HR guidance.
5Poor record accessRestrict health information access to those with a need to know.Access controls and retention schedule.
Practical duty and jurisdiction map

Table ID: cancer-awareness-jurisdiction

Source: https://www.sharehub.ltd/knowledge-hub/cancer-awareness.html

Row 1

Column-1

Prevent an exposure

Column-2

Use HSE risk assessment and COSHH guidance; identify the agent, route and source control.

Column-3

Use HSENI risk assessment and occupational-cancer guidance; retain task assessment, controls and checks.

Row 2

Column-1

Support a worker

Column-2

Apply GB Equality Act and Acas reasonable-adjustment route to the actual disadvantage.

Column-3

Apply NI disability framework and nidirect support route; record agreed functional changes privately.

Row 3

Column-1

Handle health information

Column-2

Use ICO worker-health guidance: purpose, lawful basis, minimum data and restricted access.

Column-3

UK data protection principles also apply; define who can see the NI worker’s support record.

Row 4

Column-1

Consider disease reporting

Column-2

Use HSE occupational-cancer RIDDOR criteria; do not report all diagnoses automatically.

Column-3

Use the relevant HSENI reporting process and competent NI advice; keep causation/exposure evidence separate from general awareness.

Read the complete comparison table
Practical duty and jurisdiction map
RowColumn-1Column-2Column-3
1Prevent an exposureUse HSE risk assessment and COSHH guidance; identify the agent, route and source control.Use HSENI risk assessment and occupational-cancer guidance; retain task assessment, controls and checks.
2Support a workerApply GB Equality Act and Acas reasonable-adjustment route to the actual disadvantage.Apply NI disability framework and nidirect support route; record agreed functional changes privately.
3Handle health informationUse ICO worker-health guidance: purpose, lawful basis, minimum data and restricted access.UK data protection principles also apply; define who can see the NI worker’s support record.
4Consider disease reportingUse HSE occupational-cancer RIDDOR criteria; do not report all diagnoses automatically.Use the relevant HSENI reporting process and competent NI advice; keep causation/exposure evidence separate from general awareness.
Cancer awareness records

Table ID: cancer-awareness-cancer-awareness-records

Source: https://www.sharehub.ltd/knowledge-hub/cancer-awareness.html

Row 1

Record

Campaign plan

Where it belongs

Wellbeing or communications plan.

What it should show

Audience, message, source, date and owner.

Row 2

Record

Manager briefing

Where it belongs

Training record.

What it should show

Confidentiality, signposting and escalation boundaries.

Row 3

Record

Individual support

Where it belongs

Restricted HR/OH support plan.

What it should show

Only necessary work-impact and adjustment information.

Row 4

Record

Carcinogen exposure

Where it belongs

Health and safety risk register.

What it should show

Hazard, route, controls, monitoring and surveillance.

Row 5

Record

Worker feedback

Where it belongs

Anonymous improvement log where possible.

What it should show

Themes and actions, not personal health details.

Row 6

Record

Review record

Where it belongs

Management review or wellbeing dashboard.

What it should show

What changed and whether controls improved.

Read the complete comparison table
Cancer awareness records
RowRecordWhere it belongsWhat it should show
1Campaign planWellbeing or communications plan.Audience, message, source, date and owner.
2Manager briefingTraining record.Confidentiality, signposting and escalation boundaries.
3Individual supportRestricted HR/OH support plan.Only necessary work-impact and adjustment information.
4Carcinogen exposureHealth and safety risk register.Hazard, route, controls, monitoring and surveillance.
5Worker feedbackAnonymous improvement log where possible.Themes and actions, not personal health details.
6Review recordManagement review or wellbeing dashboard.What changed and whether controls improved.
Riverside management approach

Table ID: cancer-awareness-riverside-management-approach

Source: https://www.sharehub.ltd/knowledge-hub/cancer-awareness.html

Row 1

Activity

Assess

How riverside manages it

Identifies worker groups, likely awareness needs and occupational cancer exposures.

Evidence

Wellbeing plan and carcinogen risk register.

Row 2

Activity

Analyse

How riverside manages it

Separates general health awareness from individual support and exposure control.

Evidence

Campaign brief and COSHH/asbestos/UV reviews.

Row 3

Activity

Train

How riverside manages it

Provides awareness for all staff and deeper training for managers, HR and exposed workers.

Evidence

Training matrix and attendance records.

Row 4

Activity

Implement

How riverside manages it

Runs screening signposting, UV controls, asbestos checks, wood dust controls and confidential support routes.

Evidence

Campaign materials, controls and support records.

Row 5

Activity

Check

How riverside manages it

Reviews manager confidence, worker feedback, inspection findings and campaign reach.

Evidence

Dashboard, inspections and anonymised feedback.

Row 6

Activity

Learn

How riverside manages it

Uses feedback and near misses to improve support and exposure controls.

Evidence

Action tracker and management review.

Row 7

Activity

Improve

How riverside manages it

Updates manager scripts, risk assessments, contractor requirements and annual campaign timing.

Evidence

Revised documents and close-out evidence.

Read the complete comparison table
Riverside management approach
RowActivityHow riverside manages itEvidence
1AssessIdentifies worker groups, likely awareness needs and occupational cancer exposures.Wellbeing plan and carcinogen risk register.
2AnalyseSeparates general health awareness from individual support and exposure control.Campaign brief and COSHH/asbestos/UV reviews.
3TrainProvides awareness for all staff and deeper training for managers, HR and exposed workers.Training matrix and attendance records.
4ImplementRuns screening signposting, UV controls, asbestos checks, wood dust controls and confidential support routes.Campaign materials, controls and support records.
5CheckReviews manager confidence, worker feedback, inspection findings and campaign reach.Dashboard, inspections and anonymised feedback.
6LearnUses feedback and near misses to improve support and exposure controls.Action tracker and management review.
7ImproveUpdates manager scripts, risk assessments, contractor requirements and annual campaign timing.Revised documents and close-out evidence.
Role-level learning and competence evidence

Table ID: cancer-awareness-competence

Source: https://www.sharehub.ltd/knowledge-hub/cancer-awareness.html

Row 1

Column-1

All workers: possible signs, screening limits, GP route, privacy and exposure reporting.

Column-2

Supervisor uses a brief scenario: worker chooses clinical route and reports a failed control without sharing another person’s health detail.

Column-3

Induction/briefing and scenario outcome; revisit when official signposting or local reporting changes.

Row 2

Column-1

Line manager: confidential response, functional support, safe cover and referral limits.

Column-2

HR or trained manager observes a fictional conversation and checks a private action plan and cover decision.

Column-3

Restricted support note and assessor; revisit after changed duties, treatment effects or policy.

Row 3

Column-1

Wellbeing/HR lead: campaign accuracy, inclusion, privacy and GB/NI support route.

Column-2

Competent HR/wellbeing reviewer checks campaign wording, country-specific screening link and a data-minimised support process.

Column-3

Approved message version and review owner; revisit after NHS, law or service change.

Row 4

Column-1

Exposed worker or maintainer: agent, route, engineering control, PPE limits and stop.

Column-2

Task specialist observes the actual enclosure/extraction/wet method, defect report and restart authorisation.

Column-3

Task authorisation and observed result; reassess after material, process, equipment or control failure.

Row 5

Column-1

Supervisor, purchaser and designer: source elimination, contractor interface and effective verification.

Column-2

Operations/safety assessor tests a real task specification, control failure and competent-cover handover.

Column-3

Specification/risk decision and audit sample; revisit after procurement, contractor or process change.

Row 6

Column-1

Occupational-health, safety adviser and auditor: advice within competence, evidence and escalation.

Column-2

Relevant specialist reviews a case with health privacy, exposure evidence and GB/NI boundary.

Column-3

Documented judgement and reviewer; revisit on material clinical, legal or technical update.

Read the complete comparison table
Role-level learning and competence evidence
RowColumn-1Column-2Column-3
1All workers: possible signs, screening limits, GP route, privacy and exposure reporting.Supervisor uses a brief scenario: worker chooses clinical route and reports a failed control without sharing another person’s health detail.Induction/briefing and scenario outcome; revisit when official signposting or local reporting changes.
2Line manager: confidential response, functional support, safe cover and referral limits.HR or trained manager observes a fictional conversation and checks a private action plan and cover decision.Restricted support note and assessor; revisit after changed duties, treatment effects or policy.
3Wellbeing/HR lead: campaign accuracy, inclusion, privacy and GB/NI support route.Competent HR/wellbeing reviewer checks campaign wording, country-specific screening link and a data-minimised support process.Approved message version and review owner; revisit after NHS, law or service change.
4Exposed worker or maintainer: agent, route, engineering control, PPE limits and stop.Task specialist observes the actual enclosure/extraction/wet method, defect report and restart authorisation.Task authorisation and observed result; reassess after material, process, equipment or control failure.
5Supervisor, purchaser and designer: source elimination, contractor interface and effective verification.Operations/safety assessor tests a real task specification, control failure and competent-cover handover.Specification/risk decision and audit sample; revisit after procurement, contractor or process change.
6Occupational-health, safety adviser and auditor: advice within competence, evidence and escalation.Relevant specialist reviews a case with health privacy, exposure evidence and GB/NI boundary.Documented judgement and reviewer; revisit on material clinical, legal or technical update.
Source tables and records 2
Official sources supporting topic decisions

Table ID: cancer-awareness-official-links

Source: https://www.sharehub.ltd/knowledge-hub/cancer-awareness.html

Row 1

Authority

NHS England; general health information and GP route

Direct-source

NHS cancer — Current source; see provider page

Jurisdiction

England

Supported-decision

NHS England; general health information and GP route.

Row 2

Authority

NHS England; urgent and emergency clinical escalation

Direct-source

NHS coughing up blood — Current source; see provider page

Jurisdiction

England

Supported-decision

NHS England; urgent and emergency clinical escalation.

Row 3

Authority

England programme overview; screening benefits and limits

Direct-source

NHS screening — Current source; see provider page

Jurisdiction

England

Supported-decision

England programme overview; screening benefits and limits.

Row 4

Authority

UK NSC advice; implementation differs by country

Direct-source

GOV.UK screening programmes across the UK — Current source; see provider page

Jurisdiction

United Kingdom

Supported-decision

UK NSC advice; implementation differs by country.

Row 5

Authority

GB occupational exposure examples

Direct-source

HSE cancer and construction — Current source; see provider page

Jurisdiction

Great Britain

Supported-decision

GB occupational exposure examples.

Row 6

Authority

GB hazardous-substance control

Direct-source

HSE COSHH basics — Current source; see provider page

Jurisdiction

Great Britain

Supported-decision

GB hazardous-substance control.

Row 7

Authority

Northern Ireland occupational cancer prevention

Direct-source

HSENI occupational cancers — Current source; see provider page

Jurisdiction

Northern Ireland

Supported-decision

Northern Ireland occupational cancer prevention.

Row 8

Authority

Northern Ireland risk assessment route

Direct-source

HSENI risk assessment — Current source; see provider page

Jurisdiction

Northern Ireland

Supported-decision

Northern Ireland risk assessment route.

Row 9

Authority

GB RIDDOR disease criteria

Direct-source

HSE occupational cancer reporting — Current source; see provider page

Jurisdiction

Great Britain

Supported-decision

GB RIDDOR disease criteria.

Row 10

Authority

UK worker-health privacy

Direct-source

ICO worker health information — Current source; see provider page

Jurisdiction

United Kingdom

Supported-decision

UK worker-health privacy.

Row 11

Authority

GB work support

Direct-source

Acas reasonable adjustments — Current source; see provider page

Jurisdiction

Great Britain

Supported-decision

GB work support.

Row 12

Authority

Northern Ireland work support

Direct-source

nidirect support while in work — Current source; see provider page

Jurisdiction

Northern Ireland

Supported-decision

Northern Ireland work support.

Row 13

Authority

HSE

Direct-source

HSE hierarchy of risk controls — Live official guidance; check current page

Jurisdiction

Great Britain

Supported-decision

Free GB regulator guidance: eliminate and substitute hazards, use engineering and work-organisation controls, then PPE for residual risk.

Row 14

Authority

HSE

Direct-source

HSE managing risk using PPE — Live official guidance; check current page

Jurisdiction

Great Britain

Supported-decision

GB control hierarchy and PPE limits.

Row 15

Authority

GB outdoor UV controls

Direct-source

HSE outdoor workers and sun exposure — Current source; see provider page

Jurisdiction

Great Britain

Supported-decision

GB outdoor UV controls.

Row 16

Authority

GB respirable silica cancer pathway

Direct-source

HSE cancer and construction: silica — Current source; see provider page

Jurisdiction

Great Britain

Supported-decision

GB respirable silica cancer pathway.

Row 17

Authority

GB wood-dust cancer pathway

Direct-source

HSE woodworking hazardous substances — Current source; see provider page

Jurisdiction

Great Britain

Supported-decision

GB wood-dust cancer pathway.

Row 18

Authority

GB diesel exhaust controls; HSG187 third edition

Direct-source

HSE diesel engine exhaust emissions — Current source; see provider page

Jurisdiction

Great Britain

Supported-decision

GB diesel exhaust controls; HSG187 third edition.

Row 19

Authority

HSE

Direct-source

HSE Managing for health and safety (HSG65) — Live official guidance; check current page

Jurisdiction

Great Britain

Supported-decision

Free GB regulator guidance on planning, doing, checking and acting on health and safety controls.

Row 20

Authority

NHS England lung cancer screening guidance

Direct-source

NHS lung cancer screening — Current NHS England programme status; check provider page

Jurisdiction

England

Supported-decision

England programme rollout and current local availability.

Read the complete comparison table
Official sources supporting topic decisions
RowAuthorityDirect-sourceJurisdictionSupported-decision
1NHS England; general health information and GP routeNHS cancer — Current source; see provider pageEnglandNHS England; general health information and GP route.
2NHS England; urgent and emergency clinical escalationNHS coughing up blood — Current source; see provider pageEnglandNHS England; urgent and emergency clinical escalation.
3England programme overview; screening benefits and limitsNHS screening — Current source; see provider pageEnglandEngland programme overview; screening benefits and limits.
4UK NSC advice; implementation differs by countryGOV.UK screening programmes across the UK — Current source; see provider pageUnited KingdomUK NSC advice; implementation differs by country.
5GB occupational exposure examplesHSE cancer and construction — Current source; see provider pageGreat BritainGB occupational exposure examples.
6GB hazardous-substance controlHSE COSHH basics — Current source; see provider pageGreat BritainGB hazardous-substance control.
7Northern Ireland occupational cancer preventionHSENI occupational cancers — Current source; see provider pageNorthern IrelandNorthern Ireland occupational cancer prevention.
8Northern Ireland risk assessment routeHSENI risk assessment — Current source; see provider pageNorthern IrelandNorthern Ireland risk assessment route.
9GB RIDDOR disease criteriaHSE occupational cancer reporting — Current source; see provider pageGreat BritainGB RIDDOR disease criteria.
10UK worker-health privacyICO worker health information — Current source; see provider pageUnited KingdomUK worker-health privacy.
11GB work supportAcas reasonable adjustments — Current source; see provider pageGreat BritainGB work support.
12Northern Ireland work supportnidirect support while in work — Current source; see provider pageNorthern IrelandNorthern Ireland work support.
13HSEHSE hierarchy of risk controls — Live official guidance; check current pageGreat BritainFree GB regulator guidance: eliminate and substitute hazards, use engineering and work-organisation controls, then PPE for residual risk.
14HSEHSE managing risk using PPE — Live official guidance; check current pageGreat BritainGB control hierarchy and PPE limits.
15GB outdoor UV controlsHSE outdoor workers and sun exposure — Current source; see provider pageGreat BritainGB outdoor UV controls.
16GB respirable silica cancer pathwayHSE cancer and construction: silica — Current source; see provider pageGreat BritainGB respirable silica cancer pathway.
17GB wood-dust cancer pathwayHSE woodworking hazardous substances — Current source; see provider pageGreat BritainGB wood-dust cancer pathway.
18GB diesel exhaust controls; HSG187 third editionHSE diesel engine exhaust emissions — Current source; see provider pageGreat BritainGB diesel exhaust controls; HSG187 third edition.
19HSEHSE Managing for health and safety (HSG65) — Live official guidance; check current pageGreat BritainFree GB regulator guidance on planning, doing, checking and acting on health and safety controls.
20NHS England lung cancer screening guidanceNHS lung cancer screening — Current NHS England programme status; check provider pageEnglandEngland programme rollout and current local availability.
Acronyms and terms used on this page

Table ID: cancer-awareness-terms

Source: https://www.sharehub.ltd/knowledge-hub/cancer-awareness.html

Row 1

Column-1

NHS

Column-2

National Health Service

Column-3

Clinical and screening information; programme details vary by country.

Row 2

Column-1

GP

Column-2

General practitioner

Column-3

First clinical route for a persistent, unusual or worrying symptom.

Row 3

Column-1

UK NSC

Column-2

UK National Screening Committee

Column-3

Advises all four UK countries; each decides implementation.

Row 4

Column-1

OH

Column-2

Occupational health

Column-3

Specialist advice about health and work function, not a cancer diagnosis.

Row 5

Column-1

EAP

Column-2

Employee assistance programme

Column-3

Optional confidential support service offered by some employers.

Row 6

Column-1

COSHH

Column-2

Control of Substances Hazardous to Health

Column-3

GB and NI have separate regulations controlling many hazardous substances.

Row 7

Column-1

RIDDOR

Column-2

Reporting of Injuries, Diseases and Dangerous Occurrences Regulations

Column-3

GB and NI reporting routes differ; not every cancer diagnosis is reportable.

Row 8

Column-1

UV

Column-2

Ultraviolet radiation

Column-3

Solar exposure that can damage skin during outdoor work.

Row 9

Column-1

LEV

Column-2

Local exhaust ventilation

Column-3

Engineering system capturing dust or fume near its source.

Row 10

Column-1

RPE

Column-2

Respiratory protective equipment

Column-3

Breathing protection for residual exposure after source controls.

Row 11

Column-1

PPE

Column-2

Personal protective equipment

Column-3

Protection for a wearer; it does not replace effective source control.

Row 12

Column-1

control hierarchy

Column-2

Eliminate, reduce, isolate, control, personal protective equipment, discipline

Column-3

Six-stage planning prompt for choosing and sustaining controls.

Row 13

Column-1

Carcinogen

Column-2

Cancer-causing agent

Column-3

Agent or exposure with cancer potential; identify the actual task and route.

Read the complete comparison table
Acronyms and terms used on this page
RowColumn-1Column-2Column-3
1NHSNational Health ServiceClinical and screening information; programme details vary by country.
2GPGeneral practitionerFirst clinical route for a persistent, unusual or worrying symptom.
3UK NSCUK National Screening CommitteeAdvises all four UK countries; each decides implementation.
4OHOccupational healthSpecialist advice about health and work function, not a cancer diagnosis.
5EAPEmployee assistance programmeOptional confidential support service offered by some employers.
6COSHHControl of Substances Hazardous to HealthGB and NI have separate regulations controlling many hazardous substances.
7RIDDORReporting of Injuries, Diseases and Dangerous Occurrences RegulationsGB and NI reporting routes differ; not every cancer diagnosis is reportable.
8UVUltraviolet radiationSolar exposure that can damage skin during outdoor work.
9LEVLocal exhaust ventilationEngineering system capturing dust or fume near its source.
10RPERespiratory protective equipmentBreathing protection for residual exposure after source controls.
11PPEPersonal protective equipmentProtection for a wearer; it does not replace effective source control.
12control hierarchyEliminate, reduce, isolate, control, personal protective equipment, disciplineSix-stage planning prompt for choosing and sustaining controls.
13CarcinogenCancer-causing agentAgent or exposure with cancer potential; identify the actual task and route.
How do health risks differ from combustible-dust risks?

Table ID: wood-dust-health-v-combustible-table

Source: https://www.sharehub.ltd/knowledge-hub/wood-dust.html Scope: Great Britain|Northern Ireland: apply each source only within its stated legal, regulator, health, fire/explosion, product-supply or retained technical scope. Local material, task, plant and release evidence govern.

Row 1

Question

What can harm health?

Health route

Airborne and skin exposure.

Fire explosion route

Not the main decision.

Row 2

Question

Can dust burn or explode?

Health route

Cleaning also limits exposure.

Fire explosion route

Cloud, confinement, accumulation and ignition assessment.

Row 3

Question

What proves control?

Health route

Capture, monitoring and surveillance.

Fire explosion route

Competent DSEAR basis and plant evidence.

Read the complete comparison table
How do health risks differ from combustible-dust risks?
RowQuestionHealth routeFire explosion route
1What can harm health?Airborne and skin exposure.Not the main decision.
2Can dust burn or explode?Cleaning also limits exposure.Cloud, confinement, accumulation and ignition assessment.
3What proves control?Capture, monitoring and surveillance.Competent DSEAR basis and plant evidence.
Exposure and escalation routes

Table ID: wood-dust-harm-mechanisms

Source: https://www.sharehub.ltd/knowledge-hub/wood-dust.html

Row 1

Task

Machine sanding without effective extraction

Outcome

Fine dust enters the breathing zone repeatedly; sensitisation and occupational asthma can develop.

Control

Use a lower-dust method and effective on-tool or machine LEV; pause when extraction airflow or capture fails.

Row 2

Task

Hardwood cutting and settled-dust re-suspension

Outcome

Inhaled hardwood dust can reach the nose and is linked to nasal cancer; sweeping can put fine particles back into air.

Control

Capture at source and vacuum with suitable Class M equipment; stop dry sweeping or compressed-air cleaning.

Row 3

Task

Dust deposits in extraction or enclosed handling

Outcome

An ignition source can ignite a dispersed combustible dust cloud and cause a fire or explosion.

Control

Assess DSEAR applicability, control accumulation and ignition, and isolate before opening plant; stop on smouldering or failed extraction safeguards.

Read the complete comparison table
Exposure and escalation routes
RowTaskOutcomeControl
1Machine sanding without effective extractionFine dust enters the breathing zone repeatedly; sensitisation and occupational asthma can develop.Use a lower-dust method and effective on-tool or machine LEV; pause when extraction airflow or capture fails.
2Hardwood cutting and settled-dust re-suspensionInhaled hardwood dust can reach the nose and is linked to nasal cancer; sweeping can put fine particles back into air.Capture at source and vacuum with suitable Class M equipment; stop dry sweeping or compressed-air cleaning.
3Dust deposits in extraction or enclosed handlingAn ignition source can ignite a dispersed combustible dust cloud and cause a fire or explosion.Assess DSEAR applicability, control accumulation and ignition, and isolate before opening plant; stop on smouldering or failed extraction safeguards.
Setting, harm route and decisive control

Table ID: wood-dust-sector-transfer

Source: https://www.sharehub.ltd/knowledge-hub/wood-dust.html

Row 1

Setting

Furniture workshop and machine operators

Mechanism

Repeated sawing and sanding expose operators and neighbouring benches to airborne and settled dust.

Control

Workshop owner specifies machine LEV and airflow checks; stop the machine if capture or cleaning equipment fails.

Row 2

Setting

Construction joinery and other trades

Mechanism

Portable cutting in occupied rooms sends dust to nearby workers and occupants.

Control

Principal contractor plans pre-cut parts or on-tool extraction, segregates the room and checks adjacent work; pause when spread cannot be contained.

Row 3

Setting

Theatre or fabrication shop

Mechanism

Short custom builds can create high local sanding exposure despite intermittent work.

Control

Shop manager sets a dedicated extracted area and vacuum cleaning; stop improvised unextracted sanding.

Row 4

Setting

College or training workshop

Mechanism

Novices may use several machines while an instructor has limited sight of extraction performance.

Control

Instructor verifies guards, LEV and supervision before release; isolate a station with failed extraction or missing competence.

Read the complete comparison table
Setting, harm route and decisive control
RowSettingMechanismControl
1Furniture workshop and machine operatorsRepeated sawing and sanding expose operators and neighbouring benches to airborne and settled dust.Workshop owner specifies machine LEV and airflow checks; stop the machine if capture or cleaning equipment fails.
2Construction joinery and other tradesPortable cutting in occupied rooms sends dust to nearby workers and occupants.Principal contractor plans pre-cut parts or on-tool extraction, segregates the room and checks adjacent work; pause when spread cannot be contained.
3Theatre or fabrication shopShort custom builds can create high local sanding exposure despite intermittent work.Shop manager sets a dedicated extracted area and vacuum cleaning; stop improvised unextracted sanding.
4College or training workshopNovices may use several machines while an instructor has limited sight of extraction performance.Instructor verifies guards, LEV and supervision before release; isolate a station with failed extraction or missing competence.
What do the Great Britain wood-dust exposure limits mean?

Table ID: wood-dust-wel-decision-table

Source: https://www.sharehub.ltd/knowledge-hub/wood-dust.html Scope: Great Britain: apply each source only within its stated legal, regulator, health, fire/explosion, product-supply or retained technical scope. Local material, task, plant and release evidence govern.

Row 1

Situation

GB hardwood inhalable dust

Decision value

3 mg/m3, 8-hour TWA.

Operational consequence

Do not exceed; reduce carcinogen and asthmagen exposure ALARP; not a safe target. HSE Wood dust.

Row 2

Situation

GB softwood inhalable dust only

Decision value

5 mg/m3, 8-hour TWA.

Operational consequence

Do not exceed; reduce asthmagen exposure ALARP; not a safe target. HSE Wood dust.

Row 3

Situation

GB mixed hardwood and softwood inhalable dust

Decision value

3 mg/m3, 8-hour TWA for all wood dust present.

Operational consequence

Do not average limits or treat the result as a safe target; reduce exposure ALARP. HSE Wood dust.

Row 4

Situation

Northern Ireland wood dust

Decision value

Verify the current NI approved exposure-limit route and reference period.

Operational consequence

Apply COSHH NI and HSENI guidance; do not relabel a GB legal limit as UK-wide law. HSENI Woodworking.

Read the complete comparison table
What do the Great Britain wood-dust exposure limits mean?
RowSituationDecision valueOperational consequence
1GB hardwood inhalable dust3 mg/m3, 8-hour TWA.Do not exceed; reduce carcinogen and asthmagen exposure ALARP; not a safe target. HSE Wood dust.
2GB softwood inhalable dust only5 mg/m3, 8-hour TWA.Do not exceed; reduce asthmagen exposure ALARP; not a safe target. HSE Wood dust.
3GB mixed hardwood and softwood inhalable dust3 mg/m3, 8-hour TWA for all wood dust present.Do not average limits or treat the result as a safe target; reduce exposure ALARP. HSE Wood dust.
4Northern Ireland wood dustVerify the current NI approved exposure-limit route and reference period.Apply COSHH NI and HSENI guidance; do not relabel a GB legal limit as UK-wide law. HSENI Woodworking.
Apply task-specific ERICPD and HSE control hierarchy

Table ID: wood-dust-control-hierarchy-table

Source: https://www.sharehub.ltd/knowledge-hub/wood-dust.html

Row 1

Column 1

Eliminate

Column 2

Elimination

Column 3

Remove a cutting or sanding step by ordering a pre-sized component or using a finish that avoids dry machining. Assess the material and process to confirm dust-generating work is genuinely removed.

Column 4

Process and purchasing owners verify the revised task and product quality. Hold the original method when a feasible dust-free step remains unevaluated. Basis: HSE Construction dust: Cutting and sanding wood; HSE WIS23 Wood dust: Controlling the risks

Row 2

Column 1

Reduce, including substitution

Column 2

Substitution or safer design

Column 3

Trial a lower-dust method or suitable pre-finished material, checking wood species, coating and new hazards. A different material is not automatically safe; assess handling, chemicals and dust generated by later work.

Column 4

Competent process owner observes the trial and reviews exposure/quality evidence. Reject a substitute that creates uncontrolled chemical or dust exposure. Basis: HSE WIS23 Wood dust: Controlling the risks; HSE Woodworking hazardous substances

Row 3

Column 1

Isolate

Column 2

Engineering where physical or technical separation is feasible

Column 3

Capture dust at the cutting, shaping or sanding source with correctly designed extraction and suitable collection. Position the hood and flow for the tool and material, maintain ducting, and separately assess combustible-dust fire and explosion risks.

Column 4

Competent LEV designer and workshop owner verify commissioning, airflow indicators and capture in actual work. Stop dust-generating work when extraction fails or dust escapes beyond the assessed controls. Basis: HSE Local exhaust ventilation; HSE WIS23 Wood dust: Controlling the risks; HSE HSG103 Safe handling of combustible dusts

Row 4

Column 1

Control

Column 2

Administrative or organisational controls

Column 3

Limit access to dusty work, organise effective extraction-compatible cleaning and train operators to check controls. Do not dry sweep or use compressed air to disperse settled dust; plan maintenance and waste handling to avoid re-exposure.

Column 4

Supervisor checks cleaning methods, extraction checks and visible escape, using exposure assessment where needed. Hold a task when controls or housekeeping cannot contain dust. Basis: HSE WIS23 Wood dust: Controlling the risks PDF; HSE Woodworking frequently asked questions

Row 5

Column 1

PPE

Column 2

Personal protective equipment for residual exposure

Column 3

Where assessment requires respiratory protection in addition to stronger controls, select suitable RPE for the exposure and wearer. Tight-fitting equipment requires an appropriate fit test and seal; check compatibility, maintenance and replacement.

Column 4

Competent RPE owner verifies selection, fit, training and condition. Stop work if protection cannot be used correctly; RPE does not excuse ineffective extraction or unsafe combustible-dust handling. Basis: HSE HSG53 Respiratory protective equipment at work; HSE Respiratory protective equipment FAQs

Row 6

Column 1

Discipline

Column 2

Sustain and improve all levels

Column 3

Maintain extraction and tools, arrange required examinations and exposure-led health surveillance, and act on defects or early symptoms. Surveillance detects possible effects; it does not remove dust or demonstrate safe exposure on its own.

Column 4

Employer verifies test/maintenance and competent surveillance feedback with privacy controls. Reassess after material, process, exposure or symptom changes and unresolved control failure. Basis: HSE LEV frequently asked questions; HSE Health surveillance overview

Read the complete comparison table
Apply task-specific ERICPD and HSE control hierarchy
RowColumn 1Column 2Column 3Column 4
1EliminateEliminationRemove a cutting or sanding step by ordering a pre-sized component or using a finish that avoids dry machining. Assess the material and process to confirm dust-generating work is genuinely removed.Process and purchasing owners verify the revised task and product quality. Hold the original method when a feasible dust-free step remains unevaluated. Basis: HSE Construction dust: Cutting and sanding wood; HSE WIS23 Wood dust: Controlling the risks
2Reduce, including substitutionSubstitution or safer designTrial a lower-dust method or suitable pre-finished material, checking wood species, coating and new hazards. A different material is not automatically safe; assess handling, chemicals and dust generated by later work.Competent process owner observes the trial and reviews exposure/quality evidence. Reject a substitute that creates uncontrolled chemical or dust exposure. Basis: HSE WIS23 Wood dust: Controlling the risks; HSE Woodworking hazardous substances
3IsolateEngineering where physical or technical separation is feasibleCapture dust at the cutting, shaping or sanding source with correctly designed extraction and suitable collection. Position the hood and flow for the tool and material, maintain ducting, and separately assess combustible-dust fire and explosion risks.Competent LEV designer and workshop owner verify commissioning, airflow indicators and capture in actual work. Stop dust-generating work when extraction fails or dust escapes beyond the assessed controls. Basis: HSE Local exhaust ventilation; HSE WIS23 Wood dust: Controlling the risks; HSE HSG103 Safe handling of combustible dusts
4ControlAdministrative or organisational controlsLimit access to dusty work, organise effective extraction-compatible cleaning and train operators to check controls. Do not dry sweep or use compressed air to disperse settled dust; plan maintenance and waste handling to avoid re-exposure.Supervisor checks cleaning methods, extraction checks and visible escape, using exposure assessment where needed. Hold a task when controls or housekeeping cannot contain dust. Basis: HSE WIS23 Wood dust: Controlling the risks PDF; HSE Woodworking frequently asked questions
5PPEPersonal protective equipment for residual exposureWhere assessment requires respiratory protection in addition to stronger controls, select suitable RPE for the exposure and wearer. Tight-fitting equipment requires an appropriate fit test and seal; check compatibility, maintenance and replacement.Competent RPE owner verifies selection, fit, training and condition. Stop work if protection cannot be used correctly; RPE does not excuse ineffective extraction or unsafe combustible-dust handling. Basis: HSE HSG53 Respiratory protective equipment at work; HSE Respiratory protective equipment FAQs
6DisciplineSustain and improve all levelsMaintain extraction and tools, arrange required examinations and exposure-led health surveillance, and act on defects or early symptoms. Surveillance detects possible effects; it does not remove dust or demonstrate safe exposure on its own.Employer verifies test/maintenance and competent surveillance feedback with privacy controls. Reassess after material, process, exposure or symptom changes and unresolved control failure. Basis: HSE LEV frequently asked questions; HSE Health surveillance overview
What does effective LEV look like?

Table ID: wood-dust-lev-table

Source: https://www.sharehub.ltd/knowledge-hub/wood-dust.html Scope: Great Britain|Northern Ireland: apply each source only within its stated legal, regulator, health, fire/explosion, product-supply or retained technical scope. Local material, task, plant and release evidence govern.

Row 1

Element

Hood or tool connection

User check

Close, correctly positioned and undamaged.

Specialist evidence

Capture design and commissioning.

Row 2

Element

Hose and duct

User check

Connected, not crushed or leaking.

Specialist evidence

Flow, pressure and condition record.

Row 3

Element

Indicator

User check

Within normal range before and during work.

Specialist evidence

Benchmark tied to adequate control.

Row 4

Element

Collector and discharge

User check

Not overfilled, leaking or unsafe.

Specialist evidence

Filtration, waste and fire/explosion basis.

Read the complete comparison table
What does effective LEV look like?
RowElementUser checkSpecialist evidence
1Hood or tool connectionClose, correctly positioned and undamaged.Capture design and commissioning.
2Hose and ductConnected, not crushed or leaking.Flow, pressure and condition record.
3IndicatorWithin normal range before and during work.Benchmark tied to adequate control.
4Collector and dischargeNot overfilled, leaking or unsafe.Filtration, waste and fire/explosion basis.
What should be checked before dusty work starts?

Table ID: wood-dust-pre-use-table

Source: https://www.sharehub.ltd/knowledge-hub/wood-dust.html Scope: Great Britain|Northern Ireland: apply each source only within its stated legal, regulator, health, fire/explosion, product-supply or retained technical scope. Local material, task, plant and release evidence govern.

Row 1

Check

Material and task

Pass evidence

Matches current assessment.

Hold trigger

Unknown coating, board or contaminant.

Row 2

Check

LEV

Pass evidence

Correct hood, connections and normal indicator.

Hold trigger

Damage, leak, low flow or no benchmark.

Row 3

Check

RPE

Pass evidence

Correct model, fit, condition and wearer.

Hold trigger

Wrong mask, facial-hair seal conflict or damage.

Row 4

Check

Area and clean-up

Pass evidence

Segregation and at least Class M vacuum or assessed LEV suction-hose route ready.

Hold trigger

Others exposed, dry sweeping/blow-down, or unresolved contamination/explosion suitability.

Read the complete comparison table
What should be checked before dusty work starts?
RowCheckPass evidenceHold trigger
1Material and taskMatches current assessment.Unknown coating, board or contaminant.
2LEVCorrect hood, connections and normal indicator.Damage, leak, low flow or no benchmark.
3RPECorrect model, fit, condition and wearer.Wrong mask, facial-hair seal conflict or damage.
4Area and clean-upSegregation and at least Class M vacuum or assessed LEV suction-hose route ready.Others exposed, dry sweeping/blow-down, or unresolved contamination/explosion suitability.
When is RPE needed for wood dust?

Table ID: wood-dust-rpe-table

Source: https://www.sharehub.ltd/knowledge-hub/wood-dust.html Scope: Great Britain|Northern Ireland: apply each source only within its stated legal, regulator, health, fire/explosion, product-supply or retained technical scope. Local material, task, plant and release evidence govern.

Row 1

Selection question

Is protection adequate for the residual risk?

Evidence

Wood-specific assessment, current HSE and manufacturer data; no mask-only continuation after failed extraction. HSE HSG53 Respiratory protective equipment at work.

Row 2

Selection question

Is it suitable for this person and task?

Evidence

Contaminant, wearer, duration, work rate, heat, communication and other PPE. HSE HSG53 Respiratory protective equipment at work.

Row 3

Selection question

Will it fit, be donned before dust and remain worn through clearance?

Evidence

Exact make/model/type/size fit test for tight-fitting RPE, seal check and compatible PPE. HSE HSG53 Respiratory protective equipment at work.

Row 4

Selection question

Can it be maintained and used as a programme?

Evidence

Filter/change plan, cleaning, storage, inspection, replacement, training and supervision. HSE HSG53 Respiratory protective equipment at work.

Read the complete comparison table
When is RPE needed for wood dust?
RowSelection questionEvidence
1Is protection adequate for the residual risk?Wood-specific assessment, current HSE and manufacturer data; no mask-only continuation after failed extraction. HSE HSG53 Respiratory protective equipment at work.
2Is it suitable for this person and task?Contaminant, wearer, duration, work rate, heat, communication and other PPE. HSE HSG53 Respiratory protective equipment at work.
3Will it fit, be donned before dust and remain worn through clearance?Exact make/model/type/size fit test for tight-fitting RPE, seal check and compatible PPE. HSE HSG53 Respiratory protective equipment at work.
4Can it be maintained and used as a programme?Filter/change plan, cleaning, storage, inspection, replacement, training and supervision. HSE HSG53 Respiratory protective equipment at work.
When is health surveillance needed?

Table ID: wood-dust-health-surveillance-table

Source: https://www.sharehub.ltd/knowledge-hub/wood-dust.html Scope: Great Britain|Northern Ireland: apply each source only within its stated legal, regulator, health, fire/explosion, product-supply or retained technical scope. Local material, task, plant and release evidence govern.

Row 1

Situation

Before exposure or as soon as practicable for workers who might breathe wood dust

Action

Competent OH baseline, normally respiratory questionnaire and spirometry, with a confidential health record. HSE Health surveillance overview.

Row 2

Situation

Ongoing exposure risk

Action

Competent OH sets methods and frequency; a lighter annual questionnaire-and-record scheme needs an OH decision. HSE Health surveillance overview.

Row 3

Situation

Symptoms between checks or adverse individual/group trend

Action

Prompt OH or medical route; investigate tasks and controls, revise controls and protect affected workers. HSE Health surveillance overview.

Row 4

Situation

No reported symptoms

Action

Continue prevention, checks, confidential records and symptom reporting; absence of symptoms does not prove control. HSE Health surveillance overview.

Read the complete comparison table
When is health surveillance needed?
RowSituationAction
1Before exposure or as soon as practicable for workers who might breathe wood dustCompetent OH baseline, normally respiratory questionnaire and spirometry, with a confidential health record. HSE Health surveillance overview.
2Ongoing exposure riskCompetent OH sets methods and frequency; a lighter annual questionnaire-and-record scheme needs an OH decision. HSE Health surveillance overview.
3Symptoms between checks or adverse individual/group trendPrompt OH or medical route; investigate tasks and controls, revise controls and protect affected workers. HSE Health surveillance overview.
4No reported symptomsContinue prevention, checks, confidential records and symptom reporting; absence of symptoms does not prove control. HSE Health surveillance overview.
When does wood dust need a combustible-dust assessment?

Table ID: wood-dust-combustible-applicability-table

Source: https://www.sharehub.ltd/knowledge-hub/wood-dust.html Scope: Great Britain|Northern Ireland: apply each source only within its stated legal, regulator, health, fire/explosion, product-supply or retained technical scope. Local material, task, plant and release evidence govern.

Row 1

Condition

Fine dry dust generated

Question

Can it form a combustible cloud?

Decision

Assess process and collection route. HSE HSG103 Safe handling of combustible dusts.

Row 2

Condition

Enclosed collector or duct

Question

Can ignition propagate or pressure build?

Decision

Competent engineering review. HSE HSG103 Safe handling of combustible dusts.

Row 3

Condition

Deposits outside plant

Question

Could a primary event disperse and ignite them?

Decision

Cleaning and secondary-explosion control. HSE HSG103 Safe handling of combustible dusts.

Row 4

Condition

Uncertain explosibility data

Question

Are samples representative of finest and driest dust?

Decision

Test or conservative redesign; do not copy handbook values. HSE HSG103 Safe handling of combustible dusts.

Read the complete comparison table
When does wood dust need a combustible-dust assessment?
RowConditionQuestionDecision
1Fine dry dust generatedCan it form a combustible cloud?Assess process and collection route. HSE HSG103 Safe handling of combustible dusts.
2Enclosed collector or ductCan ignition propagate or pressure build?Competent engineering review. HSE HSG103 Safe handling of combustible dusts.
3Deposits outside plantCould a primary event disperse and ignite them?Cleaning and secondary-explosion control. HSE HSG103 Safe handling of combustible dusts.
4Uncertain explosibility dataAre samples representative of finest and driest dust?Test or conservative redesign; do not copy handbook values. HSE HSG103 Safe handling of combustible dusts.
Source tables and records 3
Role-specific competence and reassessment

Table ID: wood-dust-training-competence

Source: https://www.sharehub.ltd/knowledge-hub/wood-dust.html

Row 1

Role

Worker and supervisor

Decision

Identify dust-producing tasks, check hood and airflow indicator, use safe vacuum cleaning and report symptoms or failure.

Check

Competent supervisor observes a pre-use and cleaning check; reassess after machine or material change.

Row 2

Role

LEV designer and examiner

Decision

Specify capture for simultaneous machines, commission airflow and test effectiveness.

Check

Competent LEV specialist reviews design and examination evidence; reassess after system alteration.

Row 3

Role

Maintenance or contractor team

Decision

Isolate plant, control deposits and ignition, repair defects and verify safe handback.

Check

Host and competent maintenance lead inspect work and test restart; reassess after plant or DSEAR change.

Row 4

Role

Occupational-health professional

Decision

Assess respiratory surveillance results confidentially and advise on controls and functional needs.

Check

Clinical lead checks professional scope, trends and escalation; reassess after symptoms or exposure change.

Row 5

Role

Manager and safety adviser

Decision

Review COSHH and DSEAR decisions, WEL evidence, LEV defects, RPE suitability and stop authority.

Check

Competent reviewer samples task and defect closure; repeat after monitoring, incident or new guidance.

Read the complete comparison table
Role-specific competence and reassessment
RowRoleDecisionCheck
1Worker and supervisorIdentify dust-producing tasks, check hood and airflow indicator, use safe vacuum cleaning and report symptoms or failure.Competent supervisor observes a pre-use and cleaning check; reassess after machine or material change.
2LEV designer and examinerSpecify capture for simultaneous machines, commission airflow and test effectiveness.Competent LEV specialist reviews design and examination evidence; reassess after system alteration.
3Maintenance or contractor teamIsolate plant, control deposits and ignition, repair defects and verify safe handback.Host and competent maintenance lead inspect work and test restart; reassess after plant or DSEAR change.
4Occupational-health professionalAssess respiratory surveillance results confidentially and advise on controls and functional needs.Clinical lead checks professional scope, trends and escalation; reassess after symptoms or exposure change.
5Manager and safety adviserReview COSHH and DSEAR decisions, WEL evidence, LEV defects, RPE suitability and stop authority.Competent reviewer samples task and defect closure; repeat after monitoring, incident or new guidance.
Which Great Britain duties apply?

Table ID: wood-dust-gb-law-table

Source: https://www.sharehub.ltd/knowledge-hub/wood-dust.html Scope: Great Britain: apply each source only within its stated legal, regulator, health, fire/explosion, product-supply or retained technical scope. Local material, task, plant and release evidence govern.

Row 1

Route

COSHH 2002: Control of Substances Hazardous to Health Regulations 2002.

Primary focus

Prevent or adequately control health exposure.

Boundary

GB workplace health route.

Row 2

Route

EH40: HSE EH40/2005 Workplace exposure limits.

Primary focus

GB WELs and annotations.

Boundary

Limits do not replace hierarchy or ALARP.

Row 3

Route

DSEAR 2002: Dangerous Substances and Explosive Atmospheres Regulations 2002.

Primary focus

Fire, explosion and related safety risk.

Boundary

Applies only within its scope.

Row 4

Route

HSE guidance: HSE Wood dust.

Primary focus

Practical control and evidence.

Boundary

Guidance within stated context.

Read the complete comparison table
Which Great Britain duties apply?
RowRoutePrimary focusBoundary
1COSHH 2002: Control of Substances Hazardous to Health Regulations 2002.Prevent or adequately control health exposure.GB workplace health route.
2EH40: HSE EH40/2005 Workplace exposure limits.GB WELs and annotations.Limits do not replace hierarchy or ALARP.
3DSEAR 2002: Dangerous Substances and Explosive Atmospheres Regulations 2002.Fire, explosion and related safety risk.Applies only within its scope.
4HSE guidance: HSE Wood dust.Practical control and evidence.Guidance within stated context.
Which Northern Ireland duties apply?

Table ID: wood-dust-ni-law-table

Source: https://www.sharehub.ltd/knowledge-hub/wood-dust.html Scope: Northern Ireland: apply each source only within its stated legal, regulator, health, fire/explosion, product-supply or retained technical scope. Local material, task, plant and release evidence govern.

Row 1

Route

COSHH NI 2003, SR 2003/34: Control of Substances Hazardous to Health Regulations Northern Ireland 2003.

Ni decision

Assess and control health exposure under NI law.

Row 2

Route

DSEAR NI 2003, SR 2003/152: Dangerous Substances and Explosive Atmospheres Regulations Northern Ireland 2003.

Ni decision

Assess relevant fire/explosion risk under NI law.

Row 3

Route

HSENI woodworking: HSENI Woodworking.

Ni decision

Use current NI regulator route.

Row 4

Route

HSE technical publications: HSE WIS23 Wood dust: Controlling the risks.

Ni decision

Check scope; do not call them UK legislation.

Read the complete comparison table
Which Northern Ireland duties apply?
RowRouteNi decision
1COSHH NI 2003, SR 2003/34: Control of Substances Hazardous to Health Regulations Northern Ireland 2003.Assess and control health exposure under NI law.
2DSEAR NI 2003, SR 2003/152: Dangerous Substances and Explosive Atmospheres Regulations Northern Ireland 2003.Assess relevant fire/explosion risk under NI law.
3HSENI woodworking: HSENI Woodworking.Use current NI regulator route.
4HSE technical publications: HSE WIS23 Wood dust: Controlling the risks.Check scope; do not call them UK legislation.
Official source and decision register

Table ID: wood-dust-official-links

Source: https://www.sharehub.ltd/knowledge-hub/wood-dust.html

Row 1

Authority

HSE

Source

HSE WIS23 Wood dust: Controlling the risks

Jurisdiction

Great Britain guidance

Decision

Primary current HSE woodworking sheet for health and safety risks, LEV, RPE, cleaning and surveillance.; WIS23 revision 3, 2022; checked 22 September 2026

Row 2

Authority

HSENI

Source

HSENI Woodworking

Jurisdiction

Northern Ireland guidance

Decision

NI wood-dust health effects, COSHH assessment, LEV, training and surveillance route.; Current HSENI page checked 23 September 2026; no publisher update date stated

Row 3

Authority

HSE

Source

HSE Dangerous Substances and Explosive Atmospheres Regulations

Jurisdiction

Great Britain guidance

Decision

GB workplace fire, explosion, mitigation, emergency and hazardous-area duties.; HTML updated 14 October 2024

Row 4

Authority

HSE

Source

HSE WIS23 Wood dust: Controlling the risks PDF

Jurisdiction

Great Britain guidance

Decision

Detailed current wood-dust control guidance; does not replace task assessment or competent fire/explosion design.; WIS23 revision 3, 2022; live PDF rechecked 23 September 2026

Row 5

Authority

HSE

Source

HSE Construction dust: Cutting and sanding wood

Jurisdiction

Great Britain construction guidance

Decision

Construction task controls, on-tool extraction and RPE; apply only where task conditions match.; HTML updated 12 January 2026

Row 6

Authority

HSE

Source

HSE Woodworking hazardous substances

Jurisdiction

Great Britain guidance

Decision

Wood dust, composite boards, M-class vacuum, RPE and health-surveillance context.; HTML updated 20 January 2026

Row 7

Authority

HSE

Source

HSE HSG103 Safe handling of combustible dusts

Jurisdiction

Great Britain technical guidance

Decision

Combustible-dust fire and explosion principles. Its old legal chapter and example test data must not be used as current legal or plant-design authority.; Second edition, 2003; retained copy inspected

Row 8

Authority

HSE

Source

HSE Woodworker occupational asthma guidance

Jurisdiction

Great Britain guidance

Decision

Asthma prevention, worker reporting, extraction, cleaning and surveillance.; HTML dated 10 September 2024

Row 9

Authority

HSE

Source

HSE INDG172 Breathe freely

Jurisdiction

Great Britain worker guidance

Decision

Worker awareness of respiratory sensitisers, symptoms and early reporting.; Revision 1, June 2012; retained copy inspected

Row 10

Authority

HSE

Source

HSE Wood dust

Jurisdiction

Great Britain guidance

Decision

Health effects, GB WELs, control and surveillance route.; HTML updated 4 September 2025

Row 11

Authority

HSE

Source

HSE EH40/2005 Workplace exposure limits PDF

Jurisdiction

Great Britain

Decision

GB hardwood and softwood WEL entries, mixture rule and sensitiser notation.; Fourth edition, January 2020; retained copy inspected

Row 12

Authority

legislation.gov.uk

Source

Control of Substances Hazardous to Health Regulations 2002

Jurisdiction

Great Britain

Decision

GB health-risk assessment, prevention/control, maintenance, monitoring, surveillance, information and emergency duties.; SI 2002/2677, as amended

Row 13

Authority

legislation.gov.uk

Source

Control of Substances Hazardous to Health Regulations Northern Ireland 2003

Jurisdiction

Northern Ireland

Decision

Separate NI health-risk assessment, control, maintenance, monitoring, surveillance, information and emergency duties.; SR 2003/34, as amended

Row 14

Authority

HSE

Source

HSE EH40/2005 Workplace exposure limits

Jurisdiction

Great Britain

Decision

Current GB WEL publication route and ALARP requirement for carcinogens and asthmagens.; Fourth edition, January 2020; checked 22 September 2026

Row 15

Authority

HSE

Source

HSE HSG53 Respiratory protective equipment at work

Jurisdiction

Great Britain guidance

Decision

RPE programme, selection, use and maintenance; read with current product and fit-testing guidance.; Fourth edition, 2013; retained copy inspected

Row 16

Authority

HSE

Source

HSE Local exhaust ventilation

Jurisdiction

Great Britain guidance

Decision

Specification, commissioning, use, maintenance and thorough examination of LEV.; Current portal checked 22 September 2026

Row 17

Authority

HSE

Source

HSE INDG408 Clearing the air

Jurisdiction

Great Britain guidance

Decision

Buying, commissioning, using, checking and maintaining LEV.; Revision 1, January 2016; retained copy inspected

Row 18

Authority

HSE

Source

HSE LEV frequently asked questions

Jurisdiction

Great Britain guidance

Decision

Routine checks, TExT, records, defects and competence boundaries.; HTML updated 13 March 2025

Row 19

Authority

HSE

Source

HSE Woodworking frequently asked questions

Jurisdiction

Great Britain guidance

Decision

RPE selection, APF 20, face fit and clean-shaven seal guidance.; HTML updated 16 March 2023

Row 20

Authority

HSE

Source

HSE Respiratory protective equipment FAQs

Jurisdiction

Great Britain guidance

Decision

Adequacy, suitability, fit testing and wearer/task/environment factors.; HTML updated 10 February 2025

Row 21

Authority

HSE

Source

HSE Health surveillance overview

Jurisdiction

Great Britain guidance

Decision

Risk-based surveillance, competent health input and feedback to risk control.; HTML updated 3 February 2026

Row 22

Authority

legislation.gov.uk

Source

Dangerous Substances and Explosive Atmospheres Regulations 2002

Jurisdiction

Great Britain

Decision

Separate GB fire and explosion route; applicability depends on the dangerous substance and work.; SI 2002/2776, as amended

Row 23

Authority

legislation.gov.uk

Source

Dangerous Substances and Explosive Atmospheres Regulations Northern Ireland 2003

Jurisdiction

Northern Ireland

Decision

Separate NI fire and explosion route; confirm current effects and activity scope.; SR 2003/152, as amended

Row 24

Authority

Office for Product Safety and Standards

Source

GOV.UK PPE product-safety guidance: Great Britain

Jurisdiction

Great Britain product supply

Decision

PPE placing-on-market and conformity route; separate from employer selection and use under COSHH.; Updated 24 March 2025; checked 22 September 2026

Row 25

Authority

Office for Product Safety and Standards

Source

GOV.UK PPE product-safety guidance: Northern Ireland

Jurisdiction

Northern Ireland product supply

Decision

Separate NI PPE placing-on-market route; does not prove a respirator is suitable for a task or wearer.; Updated 24 March 2025; checked 22 September 2026

Row 26

Authority

HSE

Source

HSE COSHH Essentials RPE sheets

Jurisdiction

Great Britain guidance

Decision

General RPE principles. The retained APF4 sheet is not authority for selecting wood-dust RPE; wood-specific current guidance controls.; Current index checked 22 September 2026; retained RPE1/APF4 copy inspected

Row 27

Authority

HSE

Source

HSE Managing risk using PPE

Jurisdiction

Great Britain

Decision

Five-level control hierarchy and PPE boundary; Current page; date not displayed

Read the complete comparison table
Official source and decision register
RowAuthoritySourceJurisdictionDecision
1HSEHSE WIS23 Wood dust: Controlling the risksGreat Britain guidancePrimary current HSE woodworking sheet for health and safety risks, LEV, RPE, cleaning and surveillance.; WIS23 revision 3, 2022; checked 22 September 2026
2HSENIHSENI WoodworkingNorthern Ireland guidanceNI wood-dust health effects, COSHH assessment, LEV, training and surveillance route.; Current HSENI page checked 23 September 2026; no publisher update date stated
3HSEHSE Dangerous Substances and Explosive Atmospheres RegulationsGreat Britain guidanceGB workplace fire, explosion, mitigation, emergency and hazardous-area duties.; HTML updated 14 October 2024
4HSEHSE WIS23 Wood dust: Controlling the risks PDFGreat Britain guidanceDetailed current wood-dust control guidance; does not replace task assessment or competent fire/explosion design.; WIS23 revision 3, 2022; live PDF rechecked 23 September 2026
5HSEHSE Construction dust: Cutting and sanding woodGreat Britain construction guidanceConstruction task controls, on-tool extraction and RPE; apply only where task conditions match.; HTML updated 12 January 2026
6HSEHSE Woodworking hazardous substancesGreat Britain guidanceWood dust, composite boards, M-class vacuum, RPE and health-surveillance context.; HTML updated 20 January 2026
7HSEHSE HSG103 Safe handling of combustible dustsGreat Britain technical guidanceCombustible-dust fire and explosion principles. Its old legal chapter and example test data must not be used as current legal or plant-design authority.; Second edition, 2003; retained copy inspected
8HSEHSE Woodworker occupational asthma guidanceGreat Britain guidanceAsthma prevention, worker reporting, extraction, cleaning and surveillance.; HTML dated 10 September 2024
9HSEHSE INDG172 Breathe freelyGreat Britain worker guidanceWorker awareness of respiratory sensitisers, symptoms and early reporting.; Revision 1, June 2012; retained copy inspected
10HSEHSE Wood dustGreat Britain guidanceHealth effects, GB WELs, control and surveillance route.; HTML updated 4 September 2025
11HSEHSE EH40/2005 Workplace exposure limits PDFGreat BritainGB hardwood and softwood WEL entries, mixture rule and sensitiser notation.; Fourth edition, January 2020; retained copy inspected
12legislation.gov.ukControl of Substances Hazardous to Health Regulations 2002Great BritainGB health-risk assessment, prevention/control, maintenance, monitoring, surveillance, information and emergency duties.; SI 2002/2677, as amended
13legislation.gov.ukControl of Substances Hazardous to Health Regulations Northern Ireland 2003Northern IrelandSeparate NI health-risk assessment, control, maintenance, monitoring, surveillance, information and emergency duties.; SR 2003/34, as amended
14HSEHSE EH40/2005 Workplace exposure limitsGreat BritainCurrent GB WEL publication route and ALARP requirement for carcinogens and asthmagens.; Fourth edition, January 2020; checked 22 September 2026
15HSEHSE HSG53 Respiratory protective equipment at workGreat Britain guidanceRPE programme, selection, use and maintenance; read with current product and fit-testing guidance.; Fourth edition, 2013; retained copy inspected
16HSEHSE Local exhaust ventilationGreat Britain guidanceSpecification, commissioning, use, maintenance and thorough examination of LEV.; Current portal checked 22 September 2026
17HSEHSE INDG408 Clearing the airGreat Britain guidanceBuying, commissioning, using, checking and maintaining LEV.; Revision 1, January 2016; retained copy inspected
18HSEHSE LEV frequently asked questionsGreat Britain guidanceRoutine checks, TExT, records, defects and competence boundaries.; HTML updated 13 March 2025
19HSEHSE Woodworking frequently asked questionsGreat Britain guidanceRPE selection, APF 20, face fit and clean-shaven seal guidance.; HTML updated 16 March 2023
20HSEHSE Respiratory protective equipment FAQsGreat Britain guidanceAdequacy, suitability, fit testing and wearer/task/environment factors.; HTML updated 10 February 2025
21HSEHSE Health surveillance overviewGreat Britain guidanceRisk-based surveillance, competent health input and feedback to risk control.; HTML updated 3 February 2026
22legislation.gov.ukDangerous Substances and Explosive Atmospheres Regulations 2002Great BritainSeparate GB fire and explosion route; applicability depends on the dangerous substance and work.; SI 2002/2776, as amended
23legislation.gov.ukDangerous Substances and Explosive Atmospheres Regulations Northern Ireland 2003Northern IrelandSeparate NI fire and explosion route; confirm current effects and activity scope.; SR 2003/152, as amended
24Office for Product Safety and StandardsGOV.UK PPE product-safety guidance: Great BritainGreat Britain product supplyPPE placing-on-market and conformity route; separate from employer selection and use under COSHH.; Updated 24 March 2025; checked 22 September 2026
25Office for Product Safety and StandardsGOV.UK PPE product-safety guidance: Northern IrelandNorthern Ireland product supplySeparate NI PPE placing-on-market route; does not prove a respirator is suitable for a task or wearer.; Updated 24 March 2025; checked 22 September 2026
26HSEHSE COSHH Essentials RPE sheetsGreat Britain guidanceGeneral RPE principles. The retained APF4 sheet is not authority for selecting wood-dust RPE; wood-specific current guidance controls.; Current index checked 22 September 2026; retained RPE1/APF4 copy inspected
27HSEHSE Managing risk using PPEGreat BritainFive-level control hierarchy and PPE boundary; Current page; date not displayed
Which wood-dust terms need clear boundaries?

Table ID: wood-dust-terms-table

Source: https://www.sharehub.ltd/knowledge-hub/wood-dust.html Scope: Great Britain|Northern Ireland: apply each source only within its stated legal, regulator, health, fire/explosion, product-supply or retained technical scope. Local material, task, plant and release evidence govern.

Row 1

Term

WEL

Meaning

Airborne concentration averaged over a specified reference period.

Boundary

Not a safe target or universal task time.

Row 2

Term

Inhalable dust

Meaning

Fraction entering the nose and mouth during breathing.

Boundary

Wood WEL entries use this fraction.

Row 3

Term

LEV

Meaning

Extraction that captures contamination at or near source.

Boundary

General room ventilation is not the same control.

Row 4

Term

TExT

Meaning

Thorough examination and test of LEV against intended performance.

Boundary

Does not replace user checks or maintenance.

Row 5

Term

APF

Meaning

Expected protection factor when suitable RPE is correctly selected, fitted and used.

Boundary

A label alone does not protect.

Row 6

Term

Face fit

Meaning

Test that a tight-fitting model seals to an individual wearer.

Boundary

Separate from pre-use seal check.

Row 7

Term

Health surveillance

Meaning

Repeated health checks linked to exposure risk and action.

Boundary

Not a control or diagnosis by a supervisor.

Row 8

Term

Combustible dust

Meaning

Dust capable of burning and, in some conditions, exploding as a cloud.

Boundary

Requires process-specific evidence.

Row 9

Term

Explosive atmosphere

Meaning

Mixture with air under atmospheric conditions in which combustion spreads after ignition.

Boundary

Do not infer solely from visible dust.

Row 10

Term

COSHH

Meaning

Control of Substances Hazardous to Health; GB and NI have separate regulations.

Boundary

Assessment and control of health exposure.

Row 11

Term

DSEAR

Meaning

Dangerous Substances and Explosive Atmospheres Regulations; separate GB and NI routes.

Boundary

Assess combustible dust only where the conditions fall within scope.

Row 12

Term

RPE and PPE

Meaning

Respiratory protective equipment and personal protective equipment.

Boundary

Residual protection; not a replacement for source capture.

Row 13

Term

TWA

Meaning

Time-weighted average concentration over a specified period, such as eight hours for wood-dust WELs.

Boundary

Does not turn the limit into a safe target.

Row 14

Term

HSE and HSENI

Meaning

Health and Safety Executive for Great Britain and Health and Safety Executive for Northern Ireland.

Boundary

Use the relevant jurisdiction.

Row 15

Term

ALARP

Meaning

As low as reasonably practicable: further reduction is considered even below a legal exposure limit.

Boundary

Do not stop improving control merely because a WEL is met.

Row 16

Column 1

ERICPD

Column 2

Eliminate, Reduce including substitution, Isolate, Control, personal protective equipment, Discipline.

Column 3

A SHARE decision prompt; sustain effective controls and learning.

Row 17

Column 1

PPE

Column 2

Personal protective equipment.

Column 3

Use for assessed residual exposure; it does not replace stronger feasible controls.

Read the complete comparison table
Which wood-dust terms need clear boundaries?
RowTermMeaningBoundaryColumn 1Column 2Column 3
1WELAirborne concentration averaged over a specified reference period.Not a safe target or universal task time.
2Inhalable dustFraction entering the nose and mouth during breathing.Wood WEL entries use this fraction.
3LEVExtraction that captures contamination at or near source.General room ventilation is not the same control.
4TExTThorough examination and test of LEV against intended performance.Does not replace user checks or maintenance.
5APFExpected protection factor when suitable RPE is correctly selected, fitted and used.A label alone does not protect.
6Face fitTest that a tight-fitting model seals to an individual wearer.Separate from pre-use seal check.
7Health surveillanceRepeated health checks linked to exposure risk and action.Not a control or diagnosis by a supervisor.
8Combustible dustDust capable of burning and, in some conditions, exploding as a cloud.Requires process-specific evidence.
9Explosive atmosphereMixture with air under atmospheric conditions in which combustion spreads after ignition.Do not infer solely from visible dust.
10COSHHControl of Substances Hazardous to Health; GB and NI have separate regulations.Assessment and control of health exposure.
11DSEARDangerous Substances and Explosive Atmospheres Regulations; separate GB and NI routes.Assess combustible dust only where the conditions fall within scope.
12RPE and PPERespiratory protective equipment and personal protective equipment.Residual protection; not a replacement for source capture.
13TWATime-weighted average concentration over a specified period, such as eight hours for wood-dust WELs.Does not turn the limit into a safe target.
14HSE and HSENIHealth and Safety Executive for Great Britain and Health and Safety Executive for Northern Ireland.Use the relevant jurisdiction.
15ALARPAs low as reasonably practicable: further reduction is considered even below a legal exposure limit.Do not stop improving control merely because a WEL is met.
16ERICPDEliminate, Reduce including substitution, Isolate, Control, personal protective equipment, Discipline.A SHARE decision prompt; sustain effective controls and learning.
17PPEPersonal protective equipment.Use for assessed residual exposure; it does not replace stronger feasible controls.
Main occupational lung cancer agents

Table ID: lung-cancer-occupational-main-occupational-lung-cancer-agents

Source: https://www.sharehub.ltd/knowledge-hub/lung-cancer-occupational.html

Row 1

Agent

Asbestos

Typical work examples

Maintenance, refurbishment, demolition, asbestos insulation board, lagging, sprayed coatings, old plant rooms.

Control focus

Survey, asbestos register, competent plan, licensing where required, controlled work and exposure records.

Row 2

Agent

Respirable crystalline silica

Typical work examples

Cutting stone, concrete, mortar, brick, kerbs, tiles and engineered stone.

Control focus

Avoid dry cutting, use water suppression, on-tool extraction, LEV, RPE and exposure monitoring.

Row 3

Agent

Diesel engine exhaust emissions

Typical work examples

Construction plant, tunnels, loading bays, warehouses, maintenance workshops and enclosed yards.

Control focus

Use electric alternatives, ventilation, engine maintenance, traffic control and exposure reduction.

Row 4

Agent

Radon

Typical work examples

Basements, mines, tunnels, water treatment, underground work and some geographic areas.

Control focus

Radon assessment, measurement, ventilation and building controls.

Row 5

Agent

Welding fume and metal fumes

Typical work examples

Welding stainless steel, cutting, fabrication and maintenance.

Control focus

LEV, suitable RPE, process substitution and exposure control.

Row 6

Agent

Industrial chemicals and carcinogens

Typical work examples

Certain process chemicals, combustion products or historical exposures.

Control focus

COSHH carcinogen assessment, substitution, containment, monitoring and specialist advice.

Read the complete comparison table
Main occupational lung cancer agents
RowAgentTypical work examplesControl focus
1AsbestosMaintenance, refurbishment, demolition, asbestos insulation board, lagging, sprayed coatings, old plant rooms.Survey, asbestos register, competent plan, licensing where required, controlled work and exposure records.
2Respirable crystalline silicaCutting stone, concrete, mortar, brick, kerbs, tiles and engineered stone.Avoid dry cutting, use water suppression, on-tool extraction, LEV, RPE and exposure monitoring.
3Diesel engine exhaust emissionsConstruction plant, tunnels, loading bays, warehouses, maintenance workshops and enclosed yards.Use electric alternatives, ventilation, engine maintenance, traffic control and exposure reduction.
4RadonBasements, mines, tunnels, water treatment, underground work and some geographic areas.Radon assessment, measurement, ventilation and building controls.
5Welding fume and metal fumesWelding stainless steel, cutting, fabrication and maintenance.LEV, suitable RPE, process substitution and exposure control.
6Industrial chemicals and carcinogensCertain process chemicals, combustion products or historical exposures.COSHH carcinogen assessment, substitution, containment, monitoring and specialist advice.
Source comparison

Table ID: lung-cancer-occupational-clinical-work-boundary

Source: https://www.sharehub.ltd/knowledge-hub/lung-cancer-occupational.html

Row 1

Column 1

Current symptoms

Column 2

Signpost promptly to clinical advice and preserve exposure information.

Column 3

No workplace diagnosis.

Row 2

Column 1

Past exposure

Column 2

Check records and competent controls.

Column 3

No claim of individual causation.

Row 3

Column 1

Current uncontrolled dust/fume

Column 2

Stop work and repair control.

Column 3

Do not wait for symptoms.

Read the complete comparison table
Source comparison
RowColumn 1Column 2Column 3
1Current symptomsSignpost promptly to clinical advice and preserve exposure information.No workplace diagnosis.
2Past exposureCheck records and competent controls.No claim of individual causation.
3Current uncontrolled dust/fumeStop work and repair control.Do not wait for symptoms.
Source comparison

Table ID: lung-cancer-occupational-ericpd-five-level-control

Source: https://www.sharehub.ltd/knowledge-hub/lung-cancer-occupational.html

Row 1

Column 1

Eliminate

Column 2

Elimination

Column 3

Avoid disturbing suspected asbestos and use pre-cut material.

Column 4

Planner verifies survey/material; uncertainty stops job.

Row 2

Column 1

Reduce

Column 2

Substitution

Column 3

Choose lower-dust process or alternative plant.

Column 4

Designer checks exposure and compatibility.

Row 3

Column 1

Isolate / Control

Column 2

Engineering

Column 3

Enclosure, wet method, on-tool extraction and segregation.

Column 4

Supervisor checks performance; failure stops cutting.

Row 4

Column 1

Control

Column 2

Administrative

Column 3

Work plan, trained people, restricted access and safe cleaning.

Column 4

Site manager verifies method and records.

Row 5

Column 1

PPE

Column 2

PPE

Column 3

Suitable task-selected RPE for residual inhalation risk; tight-fitting facepieces require wearer-specific fit testing for the actual make, model, type and size, a clear sealing area and each-use seal checks.

Column 4

Competent selector checks fit; never replaces extraction.

Row 6

Column 1

Discipline

Column 2

Sustain all levels

Column 3

Monitor exposure, maintain controls, investigate failures.

Column 4

Dutyholder verifies action close-out.

Read the complete comparison table
Source comparison
RowColumn 1Column 2Column 3Column 4
1EliminateEliminationAvoid disturbing suspected asbestos and use pre-cut material.Planner verifies survey/material; uncertainty stops job.
2ReduceSubstitutionChoose lower-dust process or alternative plant.Designer checks exposure and compatibility.
3Isolate / ControlEngineeringEnclosure, wet method, on-tool extraction and segregation.Supervisor checks performance; failure stops cutting.
4ControlAdministrativeWork plan, trained people, restricted access and safe cleaning.Site manager verifies method and records.
5PPEPPESuitable task-selected RPE for residual inhalation risk; tight-fitting facepieces require wearer-specific fit testing for the actual make, model, type and size, a clear sealing area and each-use seal checks.Competent selector checks fit; never replaces extraction.
6DisciplineSustain all levelsMonitor exposure, maintain controls, investigate failures.Dutyholder verifies action close-out.
Exposure pathway comparison

Table ID: lung-cancer-occupational-exposure-pathway-comparison

Source: https://www.sharehub.ltd/knowledge-hub/lung-cancer-occupational.html

Row 1

Agent

Asbestos fibres

Exposure pathway

Fibres released from disturbed asbestos-containing materials and inhaled.

Critical evidence

Survey, register, plan of work, air monitoring where needed and clearance/reoccupation evidence.

Row 2

Agent

Silica dust

Exposure pathway

Respirable dust created by cutting, grinding, drilling or crushing silica-containing materials.

Critical evidence

Task assessment, water/LEV checks, RPE face fit, exposure monitoring and health surveillance decision.

Row 3

Agent

Diesel exhaust

Exposure pathway

Fine particulate and gases from engines, especially in enclosed or poorly ventilated areas.

Critical evidence

Plant selection, no-idling rule, ventilation checks, maintenance and exposure review.

Row 4

Agent

Radon

Exposure pathway

Radioactive gas accumulates in buildings or underground spaces.

Critical evidence

Radon measurement, risk assessment and ventilation/remediation records.

Row 5

Agent

Welding fume

Exposure pathway

Fume inhaled during welding, cutting or hot work.

Critical evidence

LEV checks, RPE, process control and welding fume risk assessment.

Row 6

Agent

Mixed construction dust

Exposure pathway

Dust may contain silica, wood, plaster, cement, metals or legacy contaminants.

Critical evidence

Pre-work information, dust plan, cleaning method and worker briefing.

Read the complete comparison table
Exposure pathway comparison
RowAgentExposure pathwayCritical evidence
1Asbestos fibresFibres released from disturbed asbestos-containing materials and inhaled.Survey, register, plan of work, air monitoring where needed and clearance/reoccupation evidence.
2Silica dustRespirable dust created by cutting, grinding, drilling or crushing silica-containing materials.Task assessment, water/LEV checks, RPE face fit, exposure monitoring and health surveillance decision.
3Diesel exhaustFine particulate and gases from engines, especially in enclosed or poorly ventilated areas.Plant selection, no-idling rule, ventilation checks, maintenance and exposure review.
4RadonRadioactive gas accumulates in buildings or underground spaces.Radon measurement, risk assessment and ventilation/remediation records.
5Welding fumeFume inhaled during welding, cutting or hot work.LEV checks, RPE, process control and welding fume risk assessment.
6Mixed construction dustDust may contain silica, wood, plaster, cement, metals or legacy contaminants.Pre-work information, dust plan, cleaning method and worker briefing.
Occupational lung cancer exposure matrix

Table ID: lung-cancer-occupational-occupational-lung-cancer-exposure-matrix

Source: https://www.sharehub.ltd/knowledge-hub/lung-cancer-occupational.html

Row 1

Exposure source

Asbestos

Route and high risk tasks

Inhaled fibres from disturbed asbestos-containing materials during maintenance, refurbishment, demolition, drilling, plant-room work or legacy material removal.

Control focus

Avoid disturbance, use asbestos surveys/registers, competent planning, licensed or notifiable work routes where required, controlled areas, air monitoring and clearance evidence.

Records and medical boundary

Keep asbestos records, plans of work, exposure information and clearance/certificate evidence. Medical diagnosis remains clinical.

Row 2

Exposure source

Respirable crystalline silica

Route and high risk tasks

Fine silica dust from cutting, grinding, drilling, chasing or crushing concrete, brick, mortar, stone, kerbs, tiles and engineered stone.

Control focus

Design out dry cutting, use water suppression, on-tool extraction, LEV, segregation, H/M-class vacuums where appropriate and suitable face-fit tested RPE.

Records and medical boundary

Keep COSHH assessments, exposure monitoring, RPE fit-test records and health surveillance decisions.

Row 3

Exposure source

Diesel engine exhaust emissions

Route and high risk tasks

Inhalation of diesel particulate and gases from plant, vehicles, generators, forklifts, tunnels, loading bays and enclosed yards.

Control focus

Remove or replace diesel where possible, prevent idling, ventilate, maintain engines, separate people and control traffic flow.

Records and medical boundary

Keep plant maintenance, ventilation, no-idling checks, exposure reviews and action close-out.

Row 4

Exposure source

Welding fume

Route and high risk tasks

Inhalation of fume from welding, cutting and hot work, especially stainless steel, high-alloy materials or poor ventilation.

Control focus

Use process selection, LEV, welding booths, RPE, work positioning, maintenance and supervision.

Records and medical boundary

Keep welding fume risk assessment, LEV/TExT records, RPE records and training evidence.

Row 5

Exposure source

Radon

Route and high risk tasks

Radioactive gas exposure in basements, mines, tunnels, underground services, water treatment and higher-radon geographic areas.

Control focus

Assess radon risk, measure levels, ventilate, remediate and review where building or work conditions change.

Records and medical boundary

Keep radon measurements, remediation records and area review evidence. Health concerns require medical advice.

Row 6

Exposure source

Metals and process fumes

Route and high risk tasks

Inhalation of chromium VI, nickel, beryllium, arsenic or other carcinogenic metal/process fumes during plating, welding, foundry, pigment, catalyst or maintenance work.

Control focus

Substitute where possible, enclose, use LEV, automate, segregate, apply hygiene controls and arrange competent monitoring.

Records and medical boundary

Keep COSHH carcinogen assessments, exposure monitoring, biological monitoring where relevant and health surveillance records with strict confidentiality.

Read the complete comparison table
Occupational lung cancer exposure matrix
RowExposure sourceRoute and high risk tasksControl focusRecords and medical boundary
1AsbestosInhaled fibres from disturbed asbestos-containing materials during maintenance, refurbishment, demolition, drilling, plant-room work or legacy material removal.Avoid disturbance, use asbestos surveys/registers, competent planning, licensed or notifiable work routes where required, controlled areas, air monitoring and clearance evidence.Keep asbestos records, plans of work, exposure information and clearance/certificate evidence. Medical diagnosis remains clinical.
2Respirable crystalline silicaFine silica dust from cutting, grinding, drilling, chasing or crushing concrete, brick, mortar, stone, kerbs, tiles and engineered stone.Design out dry cutting, use water suppression, on-tool extraction, LEV, segregation, H/M-class vacuums where appropriate and suitable face-fit tested RPE.Keep COSHH assessments, exposure monitoring, RPE fit-test records and health surveillance decisions.
3Diesel engine exhaust emissionsInhalation of diesel particulate and gases from plant, vehicles, generators, forklifts, tunnels, loading bays and enclosed yards.Remove or replace diesel where possible, prevent idling, ventilate, maintain engines, separate people and control traffic flow.Keep plant maintenance, ventilation, no-idling checks, exposure reviews and action close-out.
4Welding fumeInhalation of fume from welding, cutting and hot work, especially stainless steel, high-alloy materials or poor ventilation.Use process selection, LEV, welding booths, RPE, work positioning, maintenance and supervision.Keep welding fume risk assessment, LEV/TExT records, RPE records and training evidence.
5RadonRadioactive gas exposure in basements, mines, tunnels, underground services, water treatment and higher-radon geographic areas.Assess radon risk, measure levels, ventilate, remediate and review where building or work conditions change.Keep radon measurements, remediation records and area review evidence. Health concerns require medical advice.
6Metals and process fumesInhalation of chromium VI, nickel, beryllium, arsenic or other carcinogenic metal/process fumes during plating, welding, foundry, pigment, catalyst or maintenance work.Substitute where possible, enclose, use LEV, automate, segregate, apply hygiene controls and arrange competent monitoring.Keep COSHH carcinogen assessments, exposure monitoring, biological monitoring where relevant and health surveillance records with strict confidentiality.
Source tables and records 4
Latency, records and control evidence

Table ID: lung-cancer-occupational-latency-records-and-control-evidence

Source: https://www.sharehub.ltd/knowledge-hub/lung-cancer-occupational.html

Row 1

Issue

Long latency

Why it matters

Cancer risk can develop long after exposure, so today's weak controls may become tomorrow's occupational disease concern.

Good evidence

Exposure history, job records, monitoring reports and retained control evidence.

Row 2

Issue

No immediate symptoms

Why it matters

Carcinogens may cause harm without short-term warning signs.

Good evidence

Routine control verification, exposure monitoring and worker briefings.

Row 3

Issue

Changing workforce

Why it matters

Contractors, temporary workers and mobile teams may move on before disease appears.

Good evidence

Induction records, exposure records and contractor control evidence.

Row 4

Issue

Historical uncertainty

Why it matters

Future investigations may rely on what was recorded at the time.

Good evidence

Asbestos registers, COSHH assessments, method statements, air monitoring and clearance evidence.

Row 5

Issue

Health surveillance boundary

Why it matters

Surveillance can support risk management but does not diagnose lung cancer.

Good evidence

Competent OH programme, medical confidentiality and NHS/GP signposting for symptoms.

Row 6

Issue

Control evidence

Why it matters

A written assessment is weak if it cannot prove the controls were used and effective.

Good evidence

LEV/TExT records, RPE face fit, maintenance, supervision checks and defect close-out.

Read the complete comparison table
Latency, records and control evidence
RowIssueWhy it mattersGood evidence
1Long latencyCancer risk can develop long after exposure, so today's weak controls may become tomorrow's occupational disease concern.Exposure history, job records, monitoring reports and retained control evidence.
2No immediate symptomsCarcinogens may cause harm without short-term warning signs.Routine control verification, exposure monitoring and worker briefings.
3Changing workforceContractors, temporary workers and mobile teams may move on before disease appears.Induction records, exposure records and contractor control evidence.
4Historical uncertaintyFuture investigations may rely on what was recorded at the time.Asbestos registers, COSHH assessments, method statements, air monitoring and clearance evidence.
5Health surveillance boundarySurveillance can support risk management but does not diagnose lung cancer.Competent OH programme, medical confidentiality and NHS/GP signposting for symptoms.
6Control evidenceA written assessment is weak if it cannot prove the controls were used and effective.LEV/TExT records, RPE face fit, maintenance, supervision checks and defect close-out.
Refurbishment exposure pathway example

Table ID: lung-cancer-occupational-refurbishment-exposure-pathway-example

Source: https://www.sharehub.ltd/knowledge-hub/lung-cancer-occupational.html

Row 1

Stage

Pre-work information

What can go wrong

No asbestos survey or dust information is reviewed.

Competent control

Check asbestos register and task-specific survey; uncertainty stops disturbance pending competent asbestos assessment.

Row 2

Stage

Method selection

What can go wrong

Dry cutting and drilling are chosen for speed.

Competent control

For confirmed non-asbestos material only, avoid cutting or choose suitable wet/on-tool extraction and pre-cut material under COSHH.

Row 3

Stage

Work area

What can go wrong

Other trades remain nearby and dust spreads through building.

Competent control

Segregate, schedule and control access.

Row 4

Stage

Equipment

What can go wrong

Vacuum, extraction or water suppression is missing or ineffective.

Competent control

Use suitable maintained equipment and pre-use checks.

Row 5

Stage

RPE

What can go wrong

Workers wear unfit-tested masks with beards or poor seal.

Competent control

Select suitable RPE, face-fit test and supervise use.

Row 6

Stage

Cleaning

What can go wrong

Dry sweeping re-suspends dust.

Competent control

Use suitable vacuum, wet cleaning and waste control.

Row 7

Stage

Evidence

What can go wrong

No exposure record or learning is kept.

Competent control

Keep COSHH/asbestos records, monitoring and action close-out.

Read the complete comparison table
Refurbishment exposure pathway example
RowStageWhat can go wrongCompetent control
1Pre-work informationNo asbestos survey or dust information is reviewed.Check asbestos register and task-specific survey; uncertainty stops disturbance pending competent asbestos assessment.
2Method selectionDry cutting and drilling are chosen for speed.For confirmed non-asbestos material only, avoid cutting or choose suitable wet/on-tool extraction and pre-cut material under COSHH.
3Work areaOther trades remain nearby and dust spreads through building.Segregate, schedule and control access.
4EquipmentVacuum, extraction or water suppression is missing or ineffective.Use suitable maintained equipment and pre-use checks.
5RPEWorkers wear unfit-tested masks with beards or poor seal.Select suitable RPE, face-fit test and supervise use.
6CleaningDry sweeping re-suspends dust.Use suitable vacuum, wet cleaning and waste control.
7EvidenceNo exposure record or learning is kept.Keep COSHH/asbestos records, monitoring and action close-out.
Evidence and assurance for lung cancer prevention

Table ID: lung-cancer-occupational-evidence-and-assurance-for-lung-cancer-prevention

Source: https://www.sharehub.ltd/knowledge-hub/lung-cancer-occupational.html

Row 1

Evidence

COSHH assessment

What it should show

Carcinogens, tasks, routes, controls and residual risk identified.

Weakness to challenge

Generic assessment ignores actual dust or fume task.

Row 2

Evidence

Asbestos register and plan

What it should show

Known or presumed ACMs are identified and managed before work.

Weakness to challenge

Register exists but workers do not check it.

Row 3

Evidence

Exposure monitoring

What it should show

Airborne exposure assessed where needed and used to improve control.

Weakness to challenge

Monitoring filed with no action.

Row 4

Evidence

RPE programme

What it should show

Selection, face fit, maintenance, training and supervision.

Weakness to challenge

Tight-fitting masks issued without matching wearer/facepiece fit evidence or with facial hair interfering with the seal; no suitable non-tight-fitting alternative assessed.

Row 5

Evidence

LEV or extraction records

What it should show

Controls inspected, tested and defects closed.

Weakness to challenge

LEV used despite failed TExT or blocked filters.

Row 6

Evidence

Health surveillance and records

What it should show

Surveillance arranged where required and records kept appropriately.

Weakness to challenge

Surveillance confused with medical diagnosis or general screening.

Row 7

Evidence

Worker briefing

What it should show

Workers know carcinogen risk, controls, stop triggers and cleaning rules.

Weakness to challenge

Awareness talks with no task-specific controls.

Read the complete comparison table
Evidence and assurance for lung cancer prevention
RowEvidenceWhat it should showWeakness to challenge
1COSHH assessmentCarcinogens, tasks, routes, controls and residual risk identified.Generic assessment ignores actual dust or fume task.
2Asbestos register and planKnown or presumed ACMs are identified and managed before work.Register exists but workers do not check it.
3Exposure monitoringAirborne exposure assessed where needed and used to improve control.Monitoring filed with no action.
4RPE programmeSelection, face fit, maintenance, training and supervision.Tight-fitting masks issued without matching wearer/facepiece fit evidence or with facial hair interfering with the seal; no suitable non-tight-fitting alternative assessed.
5LEV or extraction recordsControls inspected, tested and defects closed.LEV used despite failed TExT or blocked filters.
6Health surveillance and recordsSurveillance arranged where required and records kept appropriately.Surveillance confused with medical diagnosis or general screening.
7Worker briefingWorkers know carcinogen risk, controls, stop triggers and cleaning rules.Awareness talks with no task-specific controls.
Source comparison

Table ID: lung-cancer-occupational-gb-ni-law

Source: https://www.sharehub.ltd/knowledge-hub/lung-cancer-occupational.html

Row 1

Column 1

Great Britain

Column 2

HSW Act 1974

Column 3

General safe-work duty.

Row 2

Column 1

Northern Ireland

Column 2

HSW (NI) Order 1978

Column 3

Separate NI general duty.

Row 3

Column 1

Great Britain

Column 2

Management Regulations 1999

Column 3

GB risk assessment and review.

Row 4

Column 1

Northern Ireland

Column 2

Management Regulations (NI) 2000

Column 3

NI risk assessment and review.

Row 5

Column 1

Great Britain

Column 2

COSHH 2002

Column 3

GB hazardous-substance and carcinogen controls.

Row 6

Column 1

Northern Ireland

Column 2

COSHH (NI) 2003

Column 3

NI hazardous-substance controls.

Row 7

Column 1

Great Britain

Column 2

Control of Asbestos Regulations 2012

Column 3

GB asbestos-specific duties.

Row 8

Column 1

Northern Ireland

Column 2

Control of Asbestos Regulations (NI) 2012

Column 3

NI asbestos-specific duties.

Read the complete comparison table
Source comparison
RowColumn 1Column 2Column 3
1Great BritainHSW Act 1974General safe-work duty.
2Northern IrelandHSW (NI) Order 1978Separate NI general duty.
3Great BritainManagement Regulations 1999GB risk assessment and review.
4Northern IrelandManagement Regulations (NI) 2000NI risk assessment and review.
5Great BritainCOSHH 2002GB hazardous-substance and carcinogen controls.
6Northern IrelandCOSHH (NI) 2003NI hazardous-substance controls.
7Great BritainControl of Asbestos Regulations 2012GB asbestos-specific duties.
8Northern IrelandControl of Asbestos Regulations (NI) 2012NI asbestos-specific duties.
Source comparison

Table ID: lung-cancer-occupational-competence-evidence

Source: https://www.sharehub.ltd/knowledge-hub/lung-cancer-occupational.html Scope: GB HSE technical guidance supports this training example; NI adoption and legal scope require separate HSENI verification.

Row 1

Column 1

Refurbishment supervisor

Column 2

Identify suspected asbestos; stop disturbance; separate asbestos and confirmed non-asbestos silica methods.

Column 3

Competent asbestos/COSHH lead observes method challenge.

Column 4

Material information, category decision, permit and briefing.

Column 5

Unknown material, failed survey or changed scope.

Row 2

Column 1

Control specialist

Column 2

Demonstrate extraction/wet-control performance and residual RPE fit selection.

Column 3

Competent engineer/assessor checks capture and fit evidence.

Column 4

Inspection, test, fit and defect records.

Column 5

Failed control, maintenance or process change.

Row 3

Column 1

Site manager

Column 2

Hold job on failed barrier and authorise restart after verified repair.

Column 3

Safety lead audits a stop/restart scenario.

Column 4

Hold, repair, recheck and release record.

Column 5

Exposure result, near miss or new contractor.

Read the complete comparison table
Source comparison
RowColumn 1Column 2Column 3Column 4Column 5
1Refurbishment supervisorIdentify suspected asbestos; stop disturbance; separate asbestos and confirmed non-asbestos silica methods.Competent asbestos/COSHH lead observes method challenge.Material information, category decision, permit and briefing.Unknown material, failed survey or changed scope.
2Control specialistDemonstrate extraction/wet-control performance and residual RPE fit selection.Competent engineer/assessor checks capture and fit evidence.Inspection, test, fit and defect records.Failed control, maintenance or process change.
3Site managerHold job on failed barrier and authorise restart after verified repair.Safety lead audits a stop/restart scenario.Hold, repair, recheck and release record.Exposure result, near miss or new contractor.
BuildOut Ltd worked example

Table ID: lung-cancer-occupational-buildout-ltd-worked-example

Source: https://www.sharehub.ltd/knowledge-hub/lung-cancer-occupational.html

Row 1

Management element

Identify

How the business would manage it

Asbestos, silica, diesel exhaust and other carcinogen tasks are identified at planning stage.

Evidence to review

Pre-construction information and COSHH register.

Row 2

Management element

Design out

How the business would manage it

Materials, methods and plant are selected to avoid or reduce airborne carcinogens.

Evidence to review

Design and procurement review.

Row 3

Management element

Control

How the business would manage it

Wet methods, on-tool extraction, LEV, ventilation, segregation and RPE are used.

Evidence to review

Task inspection and equipment records.

Row 4

Management element

Verify

How the business would manage it

Exposure monitoring, RPE face fit, LEV checks and supervisor observations confirm control.

Evidence to review

Monitoring and assurance record.

Row 5

Management element

Learn

How the business would manage it

Dust events, failed controls and worker feedback update risk registers and method statements.

Evidence to review

Action tracker and review.

Read the complete comparison table
BuildOut Ltd worked example
RowManagement elementHow the business would manage itEvidence to review
1IdentifyAsbestos, silica, diesel exhaust and other carcinogen tasks are identified at planning stage.Pre-construction information and COSHH register.
2Design outMaterials, methods and plant are selected to avoid or reduce airborne carcinogens.Design and procurement review.
3ControlWet methods, on-tool extraction, LEV, ventilation, segregation and RPE are used.Task inspection and equipment records.
4VerifyExposure monitoring, RPE face fit, LEV checks and supervisor observations confirm control.Monitoring and assurance record.
5LearnDust events, failed controls and worker feedback update risk registers and method statements.Action tracker and review.
Related SHARE pages

Table ID: lung-cancer-occupational-related-share-pages

Source: https://www.sharehub.ltd/knowledge-hub/lung-cancer-occupational.html

Row 1

Related page

Asbestos

Why it helps

Asbestos management and work categories.

Row 2

Related page

Silica Dust

Why it helps

Respirable crystalline silica control.

Row 3

Related page

Construction Dust

Why it helps

Dust types and construction controls.

Row 4

Related page

COSHH Control Measures and Health Surveillance

Why it helps

Substance control and surveillance.

Row 5

Related page

Face Fit Testing

Why it helps

RPE fit testing and seal quality.

Row 6

Related page

Health Surveillance, Medical Records and Biological Monitoring

Why it helps

Surveillance and health records.

Read the complete comparison table
Related SHARE pages
RowRelated pageWhy it helps
1AsbestosAsbestos management and work categories.
2Silica DustRespirable crystalline silica control.
3Construction DustDust types and construction controls.
4COSHH Control Measures and Health SurveillanceSubstance control and surveillance.
5Face Fit TestingRPE fit testing and seal quality.
6Health Surveillance, Medical Records and Biological MonitoringSurveillance and health records.
Source comparison

Table ID: lung-cancer-occupational-official-links

Source: https://www.sharehub.ltd/knowledge-hub/lung-cancer-occupational.html

Row 1

Column 1

HSE

Column 2

Cancer and construction: asbestos

Column 3

Great Britain

Column 4

Asbestos fibres, lung cancer and pre-work information.

Row 2

Column 1

HSE

Column 2

Cancer and construction: silica

Column 3

Great Britain

Column 4

Silica cutting exposure.

Row 3

Column 1

HSE

Column 2

Cancer and construction: diesel exhaust

Column 3

Great Britain

Column 4

Repeated exhaust exposure.

Row 4

Column 1

HSE

Column 2

Health risks from welding

Column 3

Great Britain

Column 4

Welding-fume lung-cancer hazard.

Row 5

Column 1

HSE

Column 2

COSHH exposure limits

Column 3

Great Britain

Column 4

Carcinogen ALARP even below WEL.

Row 6

Column 1

NHS

Column 2

Lung cancer symptoms

Column 3

England

Column 4

Clinical signposting.

Row 7

Column 1

UK legislation

Column 2

COSHH 2002

Column 3

Great Britain

Column 4

GB carcinogen control.

Row 8

Column 1

UK legislation

Column 2

COSHH (NI) 2003

Column 3

Northern Ireland

Column 4

NI hazardous-substance law.

Row 9

Column 1

UK legislation

Column 2

Control of Asbestos Regulations 2012

Column 3

Great Britain

Column 4

GB asbestos-specific law.

Row 10

Column 1

UK legislation

Column 2

Control of Asbestos Regulations (NI) 2012

Column 3

Northern Ireland

Column 4

NI asbestos-specific law.

Row 11

Column 1

HSE

Column 2

Health surveillance: record keeping

Column 3

Great Britain

Column 4

Health versus clinical records; conditional COSHH retention.

Row 12

Column 1

nidirect

Column 2

GP out-of-hours service

Column 3

Northern Ireland

Column 4

NI urgent non-emergency access when GP is closed.

Row 13

Column 1

HSE

Column 2

Radon in the workplace

Column 3

Great Britain

Column 4

Radon exposure measurement and workplace control.

Row 14

Column 1

HSENI

Column 2

Work with ionising radiation: notification

Column 3

Northern Ireland

Column 4

NI workplace radon measurement and notification above 300 Bq/m³ annual average.

Row 15

Column 1

HSE

Column 2

RIDDOR: exposure to carcinogens

Column 3

Great Britain

Column 4

Diagnosed occupational cancer and current-job reporting boundary.

Row 16

Column 1

HSENI

Column 2

Occupational cancers

Column 3

Northern Ireland

Column 4

NI work-carcinogen link and separate disease route.

Row 17

Column 1

nidirect

Column 2

Coughing up blood

Column 3

Northern Ireland

Column 4

Emergency boundary for significant blood or breathing difficulty.

Row 18

Column 1

HSE

Column 2

HSE: How to manage health and safety

Column 3

Great Britain

Column 4

Management planning, worker input, checking and action.

Row 19

Column 1

HSENI

Column 2

HSENI: Health and safety made simple

Column 3

Northern Ireland

Column 4

Competent management, risk control and review.

Row 20

Column 1

HSE

Column 2

HSE: A worker’s guide to asbestos safety

Column 3

Great Britain

Column 4

Stop work on suspect material, obtain building asbestos information and use task-appropriate training.

Row 21

Column 1

UK legislation

Column 2

Health and Safety at Work etc. Act 1974

Column 3

Great Britain

Column 4

General duty framework for the GB work activity.

Row 22

Column 1

UK legislation

Column 2

Health and Safety at Work (Northern Ireland) Order 1978

Column 3

Northern Ireland

Column 4

Separate NI general duty framework.

Row 23

Column 1

UK legislation

Column 2

Management of Health and Safety at Work Regulations 1999

Column 3

Great Britain

Column 4

GB risk assessment, arrangements and review.

Row 24

Column 1

UK legislation

Column 2

Management of Health and Safety at Work Regulations (Northern Ireland) 2000

Column 3

Northern Ireland

Column 4

NI risk assessment, arrangements and review.

Row 25

Column 1

www.hse.gov.uk

Column 2

HSE welding control maintenance

Column 3

Great Britain

Column 4

Supports the page-specific decision and boundaries described above; verify the applicable task and service route.

Row 26

Column 1

www.hse.gov.uk

Column 2

HSE RPE fit-testing basics

Column 3

Great Britain

Column 4

Supports the page-specific decision and boundaries described above; verify the applicable task and service route.

Read the complete comparison table
Source comparison
RowColumn 1Column 2Column 3Column 4
1HSECancer and construction: asbestosGreat BritainAsbestos fibres, lung cancer and pre-work information.
2HSECancer and construction: silicaGreat BritainSilica cutting exposure.
3HSECancer and construction: diesel exhaustGreat BritainRepeated exhaust exposure.
4HSEHealth risks from weldingGreat BritainWelding-fume lung-cancer hazard.
5HSECOSHH exposure limitsGreat BritainCarcinogen ALARP even below WEL.
6NHSLung cancer symptomsEnglandClinical signposting.
7UK legislationCOSHH 2002Great BritainGB carcinogen control.
8UK legislationCOSHH (NI) 2003Northern IrelandNI hazardous-substance law.
9UK legislationControl of Asbestos Regulations 2012Great BritainGB asbestos-specific law.
10UK legislationControl of Asbestos Regulations (NI) 2012Northern IrelandNI asbestos-specific law.
11HSEHealth surveillance: record keepingGreat BritainHealth versus clinical records; conditional COSHH retention.
12nidirectGP out-of-hours serviceNorthern IrelandNI urgent non-emergency access when GP is closed.
13HSERadon in the workplaceGreat BritainRadon exposure measurement and workplace control.
14HSENIWork with ionising radiation: notificationNorthern IrelandNI workplace radon measurement and notification above 300 Bq/m³ annual average.
15HSERIDDOR: exposure to carcinogensGreat BritainDiagnosed occupational cancer and current-job reporting boundary.
16HSENIOccupational cancersNorthern IrelandNI work-carcinogen link and separate disease route.
17nidirectCoughing up bloodNorthern IrelandEmergency boundary for significant blood or breathing difficulty.
18HSEHSE: How to manage health and safetyGreat BritainManagement planning, worker input, checking and action.
19HSENIHSENI: Health and safety made simpleNorthern IrelandCompetent management, risk control and review.
20HSEHSE: A worker’s guide to asbestos safetyGreat BritainStop work on suspect material, obtain building asbestos information and use task-appropriate training.
21UK legislationHealth and Safety at Work etc. Act 1974Great BritainGeneral duty framework for the GB work activity.
22UK legislationHealth and Safety at Work (Northern Ireland) Order 1978Northern IrelandSeparate NI general duty framework.
23UK legislationManagement of Health and Safety at Work Regulations 1999Great BritainGB risk assessment, arrangements and review.
24UK legislationManagement of Health and Safety at Work Regulations (Northern Ireland) 2000Northern IrelandNI risk assessment, arrangements and review.
25www.hse.gov.ukHSE welding control maintenanceGreat BritainSupports the page-specific decision and boundaries described above; verify the applicable task and service route.
26www.hse.gov.ukHSE RPE fit-testing basicsGreat BritainSupports the page-specific decision and boundaries described above; verify the applicable task and service route.
Source comparison

Table ID: lung-cancer-occupational-terms

Source: https://www.sharehub.ltd/knowledge-hub/lung-cancer-occupational.html

Row 1

Column 1

COSHH

Column 2

Control of Substances Hazardous to Health

Column 3

Separate GB/NI regulations.

Row 2

Column 1

ALARP

Column 2

As low as reasonably practicable

Column 3

Carcinogen exposure control principle.

Row 3

Column 1

WEL

Column 2

Workplace exposure limit

Column 3

Air concentration benchmark, not a safe target for carcinogens.

Row 4

Column 1

RPE

Column 2

Respiratory protective equipment

Column 3

Residual protection after stronger controls.

Row 5

Column 1

ERICPD

Column 2

Eliminate, Reduce, Isolate, Control, Personal protective equipment, Discipline

Column 3

Control selection and sustained checks.

Row 6

Column 1

LEV

Column 2

Local exhaust ventilation

Column 3

Capture airborne contaminant at source.

Row 7

Column 1

RIDDOR

Column 2

Reporting of Injuries, Diseases and Dangerous Occurrences Regulations

Column 3

GB and NI use separate occupational-disease routes.

Read the complete comparison table
Source comparison
RowColumn 1Column 2Column 3
1COSHHControl of Substances Hazardous to HealthSeparate GB/NI regulations.
2ALARPAs low as reasonably practicableCarcinogen exposure control principle.
3WELWorkplace exposure limitAir concentration benchmark, not a safe target for carcinogens.
4RPERespiratory protective equipmentResidual protection after stronger controls.
5ERICPDEliminate, Reduce, Isolate, Control, Personal protective equipment, DisciplineControl selection and sustained checks.
6LEVLocal exhaust ventilationCapture airborne contaminant at source.
7RIDDORReporting of Injuries, Diseases and Dangerous Occurrences RegulationsGB and NI use separate occupational-disease routes.