Apply the learning
Use these fictional practice sheets. They do not create, sign or approve workplace records.
Competence, training and supervision
Identify the task limits, responsibilities and support or escalation route. Compare the arrangement with the fictional case; do not adopt a template without checking the actual workplace.
- A contractor has a current course certificate but has never used the site’s equipment. Can the supervisor assume independent competence?
- No. Check the task-specific gap, provide familiarisation and suitable supervision, then verify capability before independent work.
- Write observable competence criteria for one task and its stop decisions.
The live SHAREhub tool may require an account. The included fictional exercise remains available offline and never creates a real workplace record.
Safety arrangements shift handover
Select the checks that would establish usable controls during this shift. State who must act if a check fails and what evidence is needed before release.
- Is the duty supervisor identified for this shift? Evidence to seek: Observe safely against the approved local criterion or check the named record. Yes confirms the whole question; No needs a finding and action; N/A needs a reason. Do not defeat safeguards, open live enclosures or perform an unsafe test.
- Is the current task allocation available? Evidence to seek: Observe safely against the approved local criterion or check the named record. Yes confirms the whole question; No needs a finding and action; N/A needs a reason. Do not defeat safeguards, open live enclosures or perform an unsafe test.
The live SHAREhub tool may require an account. The included fictional exercise remains available offline and never creates a real workplace record.
Training competence and authorisation assurance audit
Sample relevant questions, identify objective evidence and assign an owned corrective action. A completed form alone does not prove control.
- Are competence needs derived from actual hazards and task demands? Evidence to seek: Compare role standards with field activities. Trace actual roles and risk-bearing tasks to current competence standards across managers, workers, contractors and temporary staff.
- Are knowledge practical skill experience and judgement requirements distinguished? Evidence to seek: Review clear evidence criteria for each element. Trace actual roles and risk-bearing tasks to current competence standards across managers, workers, contractors and temporary staff.
- Are new starters given site-specific hazard and control information? Evidence to seek: Compare induction content with assigned work. Sample induction and task information against worker understanding, language, literacy and actual site hazards rather than attendance signatures alone.
- Are contractors and visitors prepared for their actual site interfaces? Evidence to seek: Check local emergency and access instructions. Sample induction and task information against worker understanding, language, literacy and actual site hazards rather than attendance signatures alone.
- Are training objectives tied to observable task performance? Evidence to seek: Compare course aims with role requirements. Review training priorities, content, delivery and safe practice against the task standard and the needs of representative learners.
The live SHAREhub tool may require an account. The included fictional exercise remains available offline and never creates a real workplace record.
Optional visual practice and worked application
Use these fictional exercises to compare evidence and rehearse decisions. They do not alter course completion or assessment requirements. You can work through the same choices on paper.
Certificate versus capability on unfamiliar equipment: read the evidence
A contractor has a current general machinery-training certificate but has not used the site’s altered drill fixture. The supervisor wants them to work independently because the shift is short staffed.
The failure in this example
The certificate is being treated as task-specific proof. It does not show that the person understands this fixture, its limits or the response to an abnormal condition.
A better arrangement
Define the actual task requirements, identify the gap, provide accessible instruction and supervised practice, and verify capability on the real equipment before deciding the appropriate supervision and authority.
Worked record: who owns the decision?
The task supervisor sets the work limits and supervision; the competent instructor/assessor checks the person’s demonstrated capability against the task standard.
Match the evidence roles in this task
A contractor has a current general machinery-training certificate but has not used the site’s altered drill fixture. The supervisor wants them to work independently because the shift is short staffed.
Place each statement under the evidence role it describes. These roles support one task decision; they are not interchangeable.
- The certificate is relevant background evidence, with a scope and limitations. Prior learning. This statement addresses prior learning. The certificate is relevant background evidence, with a scope and limitations.
- Observed safe performance and a useful teach-back test application on this equipment. Task demonstration. This statement addresses task demonstration. Observed safe performance and a useful teach-back test application on this equipment.
- The supervisor sets tasks, limits and supervision from the evidence, then reviews meaningful change. Work authority. This statement addresses work authority. The supervisor sets tasks, limits and supervision from the evidence, then reviews meaningful change.
Certificate versus capability on unfamiliar equipment: test the arrangement
The certificate is being treated as task-specific proof. It does not show that the person understands this fixture, its limits or the response to an abnormal condition. Define the actual task requirements, identify the gap, provide accessible instruction and supervised practice, and verify capability on the real equipment before deciding the appropriate supervision and authority.
Worked record: evidence to obtain
The task standard, relevant prior experience, equipment differences, understanding/teach-back, observed performance, abnormal-condition response and review trigger.
Worked record: decision and owner
Define the actual task requirements, identify the gap, provide accessible instruction and supervised practice, and verify capability on the real equipment before deciding the appropriate supervision and authority. The task supervisor sets the work limits and supervision; the competent instructor/assessor checks the person’s demonstrated capability against the task standard.
Why the weak assurance fails
The certificate is being treated as task-specific proof. It does not show that the person understands this fixture, its limits or the response to an abnormal condition.
Choose evidence that supports the review
A contractor has a current general machinery-training certificate but has not used the site’s altered drill fixture. The supervisor wants them to work independently because the shift is short staffed. The team is reviewing what can support acceptance.
Select the two statements which support the example’s review. Leave the two unsupported shortcuts unselected.
- The supervisor compares the required task standard with the person’s actual current capability. Relevant evidence. This is useful evidence for this example. The task standard, relevant prior experience, equipment differences, understanding/teach-back, observed performance, abnormal-condition response and review trigger.
- Observed practice includes recognising the relevant stop conditions and asking for support. Relevant evidence. This is useful evidence for this example. The task standard, relevant prior experience, equipment differences, understanding/teach-back, observed performance, abnormal-condition response and review trigger.
- A valid generic certificate is used as the only evidence for independent work on the altered fixture. Insufficient evidence. This does not resolve the example’s acceptance gap. The certificate is being treated as task-specific proof. It does not show that the person understands this fixture, its limits or the response to an abnormal condition.
- The supervisor reduces supervision because production cover is short, before capability is verified. Insufficient evidence. This does not resolve the example’s acceptance gap. The certificate is being treated as task-specific proof. It does not show that the person understands this fixture, its limits or the response to an abnormal condition.
Certificate versus capability on unfamiliar equipment: follow the changed condition
The fixture, material, person’s role or required task changes after initial familiarisation. Follow the decision route; it supplies learning outcomes, not permission for real work.
A meaningful change
The fixture, material, person’s role or required task changes after initial familiarisation. Revisit the basis of the affected decision instead of extending an earlier acceptance beyond its scope.
Worked record: what remains on hold?
The certificate is being treated as task-specific proof. It does not show that the person understands this fixture, its limits or the response to an abnormal condition. The example remains unresolved until the task-specific gap has been addressed and understanding checked.
Worked record: what would support later acceptance?
The task standard, relevant prior experience, equipment differences, understanding/teach-back, observed performance, abnormal-condition response and review trigger. The task supervisor sets the work limits and supervision; the competent instructor/assessor checks the person’s demonstrated capability against the task standard.
Follow the changed-condition decision
A contractor has a current general machinery-training certificate but has not used the site’s altered drill fixture. The supervisor wants them to work independently because the shift is short staffed. Changed condition: The fixture, material, person’s role or required task changes after initial familiarisation.
Follow the evidence gates and compare the outcome of an unresolved condition with an established one.
- Has the reviewer established that the task-specific gap has been addressed and understanding checked?
- Yes, the stated basis is established: That resolves this evidence question; check the separate readiness condition next. Next: Has the responsible owner established that demonstrated performance and abnormal-condition response support the proposed supervision level?
- No, the basis remains unresolved: Do not infer acceptance from an incomplete or conflicting basis. The certificate is being treated as task-specific proof. It does not show that the person understands this fixture, its limits or the response to an abnormal condition. Next: Example outcome: retain the hold point — Define the actual task requirements, identify the gap, provide accessible instruction and supervised practice, and verify capability on the real equipment before deciding the appropriate supervision and authority.
- Has the responsible owner established that demonstrated performance and abnormal-condition response support the proposed supervision level?
- Yes, the required readiness evidence is established: In this fictional exercise, both evidence gates are established. Real work still follows its own authorised release. Next: Example outcome: record the verified basis for the authorised decision — Record the evidence, owner and limits of this example’s decision. The fixture, material, person’s role or required task changes after initial familiarisation. is a reason to review it again; the course does not authorise actual work.
- No, readiness or competent cover is still missing: An agreed principle is not a usable arrangement. Resolve the missing condition before affected work proceeds. Next: Example outcome: arrange the missing protection or support — The task supervisor sets the work limits and supervision; the competent instructor/assessor checks the person’s demonstrated capability against the task standard. Re-plan the affected work and obtain evidence that the required readiness condition is met.
- Example outcome: retain the hold point
Define the actual task requirements, identify the gap, provide accessible instruction and supervised practice, and verify capability on the real equipment before deciding the appropriate supervision and authority.
- Example outcome: arrange the missing protection or support
The task supervisor sets the work limits and supervision; the competent instructor/assessor checks the person’s demonstrated capability against the task standard. Re-plan the affected work and obtain evidence that the required readiness condition is met.
- Example outcome: record the verified basis for the authorised decision
Record the evidence, owner and limits of this example’s decision. The fixture, material, person’s role or required task changes after initial familiarisation. is a reason to review it again; the course does not authorise actual work.
Task-specific training-needs review
Use the altered drill-fixture task to compare required capability, current evidence and the gap. Add an instruction/practice plan and a later verification of performance, not just a course-booking action.
Fictional record — task and concern: A contractor has a current general machinery-training certificate but has not used the site’s altered drill fixture. The supervisor wants them to work independently because the shift is short staffed.
Fictional record — decision: Define the actual task requirements, identify the gap, provide accessible instruction and supervised practice, and verify capability on the real equipment before deciding the appropriate supervision and authority.
Fictional record — owner: The task supervisor sets the work limits and supervision; the competent instructor/assessor checks the person’s demonstrated capability against the task standard.
Fictional record — verification and review: The task standard, relevant prior experience, equipment differences, understanding/teach-back, observed performance, abnormal-condition response and review trigger. Review trigger: The fixture, material, person’s role or required task changes after initial familiarisation.
Optional choices save on this browser, separately from recorded course progress. Live tools retain their own access and competent-review requirements.