Apply the learning
Use these fictional practice sheets. They do not create, sign or approve workplace records.
Buried services and ground penetration
Identify the task limits, responsibilities and support or escalation route. Compare the arrangement with the fictional case; do not adopt a template without checking the actual workplace.
- Plans show no service, but a detector gives an unexplained signal in the work area. Should the team proceed because the drawing is clear?
- No. Stop and resolve the conflict with competent investigation and a revised safe method. Plans and detection are complementary evidence, not competing permissions.
- Identify the evidence and authorisation needed before one planned ground-breaking task.
The live SHAREhub tool may require an account. The included fictional exercise remains available offline and never creates a real workplace record.
Construction supervisor shift walk-round
Select the checks that would establish usable controls during this shift. State who must act if a check fails and what evidence is needed before release.
- Have today's workers completed the site induction? Evidence to seek: Observe safely against the approved local criterion or check the named record. Yes confirms the whole question; No needs a finding and action; N/A needs a reason. Do not defeat safeguards, open live enclosures or perform an unsafe test.
- Has the supervisor briefed today's task-specific method? Evidence to seek: Observe safely against the approved local criterion or check the named record. Yes confirms the whole question; No needs a finding and action; N/A needs a reason. Do not defeat safeguards, open live enclosures or perform an unsafe test.
The live SHAREhub tool may require an account. The included fictional exercise remains available offline and never creates a real workplace record.
Excavation and buried services audit
Sample relevant questions, identify objective evidence and assign an owned corrective action. A completed form alone does not prove control.
- Are current service records and site information obtained and their limitations understood? Evidence to seek: Compare drawings with site features and utility enquiries; record uncharted-service assumptions and required verification.
- Has the safe digging plan combined locating, marking and controlled exposure of services? Evidence to seek: Check locating equipment, competence, survey records and trial-hole methods; a drawing or scanner alone is insufficient.
- Is the temporary-works register complete for support, falsework, formwork, platforms and access? Evidence to seek: Walk the site against the register; include less visible items such as hoardings, propping, haul roads and working platforms.
- Are responsibilities, coordination and design checking proportionate to complexity and risk? Evidence to seek: Sample appointments, competence, design-check category decisions and interfaces; a role title alone is not proof of effective control.
- Are pedestrians separated from moving vehicles across entrances, routes and loading areas? Evidence to seek: Walk peak-time routes, crossings and visitor access; assess physical segregation rather than paint alone.
The live SHAREhub tool may require an account. The included fictional exercise remains available offline and never creates a real workplace record.
Avoiding buried services
Build a short fictional briefing: task, harm, controls, stop point and a question that checks understanding.
- Plans show no service, but a detector gives an unexplained signal in the work area. Should the team proceed because the drawing is clear?
- No. Stop and resolve the conflict with competent investigation and a revised safe method. Plans and detection are complementary evidence, not competing permissions.
- Identify the evidence and authorisation needed before one planned ground-breaking task.
The live SHAREhub tool may require an account. The included fictional exercise remains available offline and never creates a real workplace record.
Optional visual practice and worked application
Use these fictional exercises to compare evidence and rehearse decisions. They do not alter course completion or assessment requirements. You can work through the same choices on paper.
Conflicting pre-dig evidence: read the evidence
A small excavation is planned beside a depot. An older service drawing shows a clear route, but a competent locator reports an unexplained indication crossing the proposed excavation.
The failure in this example
The site manager chooses the drawing because it is easier to fit the programme. That turns uncertainty into an unsupported permission to dig.
A better arrangement
Hold the affected excavation and obtain competent resolution of the conflicting information. Reassess the method and location before release; service information does not replace excavation stability, access, water and inspection arrangements.
Worked record: who owns the decision?
The pre-dig supervisor coordinates the client/service-owner information and competent locating input; the excavation owner confirms the revised task arrangements.
Match the evidence roles in this task
A small excavation is planned beside a depot. An older service drawing shows a clear route, but a competent locator reports an unexplained indication crossing the proposed excavation.
Place each statement under the evidence role it describes. These roles support one task decision; they are not interchangeable.
- The drawing is one information source with a date, scope and limitations. Service records. This statement addresses service records. The drawing is one information source with a date, scope and limitations.
- The indication is a finding to investigate competently, not something to erase to match the plan. Site/locating evidence. This statement addresses site/locating evidence. The indication is a finding to investigate competently, not something to erase to match the plan.
- Ground stability, water, edges, access and inspections are separate task-release questions. Excavation readiness. This statement addresses excavation readiness. Ground stability, water, edges, access and inspections are separate task-release questions.
Conflicting pre-dig evidence: test the arrangement
The site manager chooses the drawing because it is easier to fit the programme. That turns uncertainty into an unsupported permission to dig. Hold the affected excavation and obtain competent resolution of the conflicting information. Reassess the method and location before release; service information does not replace excavation stability, access, water and inspection arrangements.
Worked record: evidence to obtain
Current relevant records, site clues, locating findings and their limitations, the unresolved route, the revised safe method and the separate support/access/inspection requirements.
Worked record: decision and owner
Hold the affected excavation and obtain competent resolution of the conflicting information. Reassess the method and location before release; service information does not replace excavation stability, access, water and inspection arrangements. The pre-dig supervisor coordinates the client/service-owner information and competent locating input; the excavation owner confirms the revised task arrangements.
Why the weak assurance fails
The site manager chooses the drawing because it is easier to fit the programme. That turns uncertainty into an unsupported permission to dig.
Choose evidence that supports the review
A small excavation is planned beside a depot. An older service drawing shows a clear route, but a competent locator reports an unexplained indication crossing the proposed excavation. The team is reviewing what can support acceptance.
Select the two statements which support the example’s review. Leave the two unsupported shortcuts unselected.
- The competent investigation records what is known, what remains uncertain and the revised safe method. Relevant evidence. This is useful evidence for this example. Current relevant records, site clues, locating findings and their limitations, the unresolved route, the revised safe method and the separate support/access/inspection requirements.
- The excavation owner checks service controls together with stability, access and changing ground conditions. Relevant evidence. This is useful evidence for this example. Current relevant records, site clues, locating findings and their limitations, the unresolved route, the revised safe method and the separate support/access/inspection requirements.
- An older drawing is treated as conclusive because the proposed programme was based on it. Insufficient evidence. This does not resolve the example’s acceptance gap. The site manager chooses the drawing because it is easier to fit the programme. That turns uncertainty into an unsupported permission to dig.
- A clear result in one checked location is extended to the whole excavation without verification. Insufficient evidence. This does not resolve the example’s acceptance gap. The site manager chooses the drawing because it is easier to fit the programme. That turns uncertainty into an unsupported permission to dig.
Conflicting pre-dig evidence: follow the changed condition
A later exposure or site finding does not match the route previously established. Follow the decision route; it supplies learning outcomes, not permission for real work.
A meaningful change
A later exposure or site finding does not match the route previously established. Revisit the basis of the affected decision instead of extending an earlier acceptance beyond its scope.
Worked record: what remains on hold?
The site manager chooses the drawing because it is easier to fit the programme. That turns uncertainty into an unsupported permission to dig. The example remains unresolved until the conflicting indication and record have been resolved within the proposed work boundary.
Worked record: what would support later acceptance?
Current relevant records, site clues, locating findings and their limitations, the unresolved route, the revised safe method and the separate support/access/inspection requirements. The pre-dig supervisor coordinates the client/service-owner information and competent locating input; the excavation owner confirms the revised task arrangements.
Follow the changed-condition decision
A small excavation is planned beside a depot. An older service drawing shows a clear route, but a competent locator reports an unexplained indication crossing the proposed excavation. Changed condition: A later exposure or site finding does not match the route previously established.
Follow the evidence gates and compare the outcome of an unresolved condition with an established one.
- Has the reviewer established that the conflicting indication and record have been resolved within the proposed work boundary?
- Yes, the stated basis is established: That resolves this evidence question; check the separate readiness condition next. Next: Has the responsible owner established that the revised excavation method, support, access and competent inspection arrangements are ready?
- No, the basis remains unresolved: Do not infer acceptance from an incomplete or conflicting basis. The site manager chooses the drawing because it is easier to fit the programme. That turns uncertainty into an unsupported permission to dig. Next: Example outcome: retain the hold point — Hold the affected excavation and obtain competent resolution of the conflicting information. Reassess the method and location before release; service information does not replace excavation stability, access, water and inspection arrangements.
- Has the responsible owner established that the revised excavation method, support, access and competent inspection arrangements are ready?
- Yes, the required readiness evidence is established: In this fictional exercise, both evidence gates are established. Real work still follows its own authorised release. Next: Example outcome: record the verified basis for the authorised decision — Record the evidence, owner and limits of this example’s decision. A later exposure or site finding does not match the route previously established. is a reason to review it again; the course does not authorise actual work.
- No, readiness or competent cover is still missing: An agreed principle is not a usable arrangement. Resolve the missing condition before affected work proceeds. Next: Example outcome: arrange the missing protection or support — The pre-dig supervisor coordinates the client/service-owner information and competent locating input; the excavation owner confirms the revised task arrangements. Re-plan the affected work and obtain evidence that the required readiness condition is met.
- Example outcome: retain the hold point
Hold the affected excavation and obtain competent resolution of the conflicting information. Reassess the method and location before release; service information does not replace excavation stability, access, water and inspection arrangements.
- Example outcome: arrange the missing protection or support
The pre-dig supervisor coordinates the client/service-owner information and competent locating input; the excavation owner confirms the revised task arrangements. Re-plan the affected work and obtain evidence that the required readiness condition is met.
- Example outcome: record the verified basis for the authorised decision
Record the evidence, owner and limits of this example’s decision. A later exposure or site finding does not match the route previously established. is a reason to review it again; the course does not authorise actual work.
Pre-dig task-risk record
Use a fictional pre-dig assessment to record the drawing/locating conflict, affected boundary, hold point and competent resolution. Do not treat the tool or a numerical band as permission to dig.
Fictional record — task and concern: A small excavation is planned beside a depot. An older service drawing shows a clear route, but a competent locator reports an unexplained indication crossing the proposed excavation.
Fictional record — decision: Hold the affected excavation and obtain competent resolution of the conflicting information. Reassess the method and location before release; service information does not replace excavation stability, access, water and inspection arrangements.
Fictional record — owner: The pre-dig supervisor coordinates the client/service-owner information and competent locating input; the excavation owner confirms the revised task arrangements.
Fictional record — verification and review: Current relevant records, site clues, locating findings and their limitations, the unresolved route, the revised safe method and the separate support/access/inspection requirements. Review trigger: A later exposure or site finding does not match the route previously established.
Optional choices save on this browser, separately from recorded course progress. Live tools retain their own access and competent-review requirements.