SHAREhub
PROCESS SAFETY AWARENESS · SH-PSA-13

Operating instructions and process limits

Operating instructions and process limits — workplace learning illustration
Illustrative workplace context for this course.

Use current instructions, defined operating limits and disciplined communication to recognise when the process no longer matches its approved basis.

Free training · Approx. 70–105 minutes

Public teaching and practice are free. Use a free learner account in Moodle for confirmed saves and recorded assessment. A certificate of completion depends on completing the required learning, scoring at least 80% and answering every critical safety question correctly.

Open in the LMS →Try the interactive practice

Your practical case

A fictional polymer blending unit is preparing a product change. A printed instruction is older than the controlled copy, an operator uses a familiar shortcut and a trend moves toward an alarm. Learners must separate approved operating information from habit and expectation.

Process operators, supervisors, maintenance planners, contractors and managers who need topic awareness.

Independent SHAREhub awareness. This course does not provide a NEBOSH qualification, accreditation or authority to operate, design, isolate, test or maintain plant. Use competent site arrangements for real work.

What you will learn

Course outline

Read a usable instruction

  1. Instructions support a controlled taskExplain what an operating procedure must enable a person to decide.
  2. Use the applicable controlled versionIdentify scope, revision and operating role before reliance.
  3. Make each step actionableRecognise clear prerequisites, hold points and completion evidence.

Validate against the plant

  1. Validate the instruction at the workfaceCompare the written method with actual plant and user needs.
  2. Separate targets from safety limitsExplain the purpose of a defined safe operating envelope.

Understand the envelope

  1. Understand alarms and protective actionDistinguish operator warning from a guaranteed safe outcome.
  2. Respond to an excursionRecognise when the approved operating basis needs a controlled decision.
  3. Use the right operating modeIdentify why start-up and shutdown can need different conditions.

Recognise deviation

  1. Control deviations and workaroundsDistinguish authorised temporary change from informal habit.
  2. Use disciplined communication and checksRecognise how routine operating habits support barrier reliability.

Maintain disciplined control

  1. Learn from repeated operating gapsConnect reported deviations to controlled improvement.
  2. Resolve the product-change caseIntegrate instruction, operating basis and controlled response.

Practise and test your reasoning

12 lesson decisions and 6 required activities use evidence sorting, matching, sequencing, branching choices and applied checks. Dragging has equivalent labelled controls. The 20-question final assessment requires 80% and every critical answer, after all learning requirements are complete.

Use the linked risk assessment, toolbox talk, policy and assurance resources with their included fictional exercises. Points and module badges help show progress; they do not replace the assessment requirements.

Duration estimates include teaching, activities, checks and assessment. Your pace and retries may vary.

Sources and scope

Independent awareness study · PSM topic 3.1. Independent SHAREhub learning; this is not the NEBOSH qualification.

Knowledge Hub topic coverage

Read the lesson source references

Presentation and model workshop

Use the same course imagery, worked decisions and historical case in a 28-slide teaching companion. Practise classification, compare explained choices and inspect the linked model case.

Open the interactive presentation workshop · Download PowerPoint

This optional companion does not replace the required course activities or final assessment.