SHAREhub
PROCESS SAFETY AWARENESS · SH-PSA-12

Contractor selection and coordination

Contractor selection and coordination — workplace learning illustration
Illustrative workplace context for this course.

Choose capable contractors, communicate the actual process hazards and coordinate the work interfaces that separate organisations can miss.

Free training · Approx. 80–115 minutes

Public teaching and practice are free. Use a free learner account in Moodle for confirmed saves and recorded assessment. A certificate of completion depends on completing the required learning, scoring at least 80% and answering every critical safety question correctly.

Open in the LMS →Try the interactive practice

Your practical case

A fictional additives site is replacing a heat exchanger during a short outage. A contractor adds a subcontract lifting crew, cleaning releases are planned nearby and the temporary welfare cabin has moved. Each contract looks complete; the combined work arrangement is not yet clear.

Process operators, supervisors, maintenance planners, contractors and managers who need topic awareness.

Independent SHAREhub awareness. This course does not provide a NEBOSH qualification, accreditation or authority to operate, design, isolate, test or maintain plant. Use competent site arrangements for real work.

What you will learn

Course outline

Select and scope

  1. Contracting does not remove the hazardExplain why process risk needs control across company boundaries.
  2. Select for the real taskDistinguish relevant capability from general credentials.
  3. Remain an informed clientRecognise the knowledge needed to commission and challenge specialist work.

Connect the organisations

  1. Bridge the two control systemsMake roles, rules and decision authority consistent.
  2. Verify the people who arriveDistinguish organisational approval from crew readiness.

Coordinate the work

  1. Communicate the hazards at this siteBuild an induction around task-relevant information.
  2. Connect work control and contractor methodKeep permits and isolations aligned with the actual task.
  3. Assess combined operationsIdentify a hazard created by otherwise separate work packages.

Monitor the changing site

  1. Place temporary facilities deliberatelyRecognise how accommodation and laydown alter exposure.
  2. Monitor the work that actually happensUse supervision and field checks to detect drift.

Accept and learn

  1. Accept hand-back on evidenceIdentify what the client needs before operational return.
  2. Coordinate the outage as one systemIntegrate capability, work state and changing interfaces.

Practise and test your reasoning

12 lesson decisions and 6 required activities use evidence sorting, matching, sequencing, branching choices and applied checks. Dragging has equivalent labelled controls. The 20-question final assessment requires 80% and every critical answer, after all learning requirements are complete.

Use the linked risk assessment, toolbox talk, policy and assurance resources with their included fictional exercises. Points and module badges help show progress; they do not replace the assessment requirements.

Duration estimates include teaching, activities, checks and assessment. Your pace and retries may vary.

Sources and scope

Independent awareness study · PSM topic 2.6. Independent SHAREhub learning; this is not the NEBOSH qualification.

Knowledge Hub topic coverage

Read the lesson source references

Presentation and model workshop

Use the same course imagery, worked decisions and historical case in a 28-slide teaching companion. Practise classification, compare explained choices and inspect the linked model case.

Open the interactive presentation workshop · Download PowerPoint

This optional companion does not replace the required course activities or final assessment.