SHAREhub

Car garage and accident repair / Paint spraying, isocyanates and booth safety

Car garage and accident repair · SH-GAR-05

Paint spraying, isocyanates and booth safety

Actual fictional garage model: paint
Illustrative workplace context for this course.

Free online training · Approximate learning time: 110–175 minutes · Self-paced

Keep exposure controlled during mixing, spraying, clearance, cleaning and curing.

£0Free training
110–175 minutesEstimated active learning
10 lessons5 modules
16 questionsFinal assessment
Open this course in the LMS →

Full public teaching and readers are free without an account. A free learner account is required for saved LMS progress and recorded assessment. Completion and any course-completion certificate depend on the configured LMS conditions.

Who this course is for

Sprayers, paint preparers, bodyshop supervisors and occupational-health coordinators.

Booth 2 has a posted clearance time, but filters and fan settings were changed yesterday without verification. A sprayer lifts their visor to inspect the finish while another colleague prepares to enter. Booth 3 has an extraction alarm. The supervisor points to an earlier normal monitoring result and asks production to continue.

Independent awareness and decision learning for vehicle repair. Practical competence, EV high-voltage work, asbestos work and other specialist tasks require separate training and authorisation. GB baseline; check corresponding Northern Ireland duties and local arrangements.

Learning outcomes

Course outline

Module 1

Understand the repair and the people

  1. Understand this repair environmentKeep exposure controlled during mixing, spraying, clearance, cleaning and curing.
  2. Choose controls that fit the actual taskUse source guidance to distinguish control selection, work instructions and evidence of effectiveness.
Module 2

Recognise the exposure and energy

  1. Isocyanate spraying: the booth and breathing protection work togetherContain the mist and protect the person inside it; both controls must remain effective through the full task.
  2. Booth clearance: a stopped spray gun is not clear airProtect the period after spraying as carefully as spraying itself; the clearance decision belongs to the specific booth.
Module 3

Choose and apply effective controls

  1. Booth extraction fault: recognise a failed safety barrierA fault warning is a stop-and-investigate signal; restore and verify the barrier before restoring production.
  2. Paint mixing: identify the product and control every exposure routeMatch controls to the real substance and the way it is handled; mixing, spraying and cleaning have different exposure pathways.
Module 4

Verify the working arrangement

  1. Spray and bake: control the change of operating modeTreat access during a curing cycle as a controlled process change, with clear conditions for interruption, entry and restart.
  2. Breathing symptoms: separate exposure checks from health surveillanceGood exposure results do not cancel a symptom report; prevention, monitoring and early health action reinforce each other.
Module 5

Make the release decision

  1. Capstone: decide whether the job may proceedCombine the observations, restrictions and verification into one justified work decision.
  2. Take the learning into a real briefingTurn the selected control into a clear question, observation and review trigger.

Activities, model practice and assessment

Work through 9 required applied activities and 3 model-practice pauses, with explanatory feedback and independent lesson decisions. Complete 6 distinct model mission sequences across those pauses. Use the actual fictional garage centre model or its equivalent accessible route to complete the required decision sequences; launching the model alone does not complete practice.

The 16-question assessment requires at least 80% plus every designated critical safety answer. Complete the required activities, practice and lesson checks. Points and badges cannot offset a critical safety error.

Use the LMS for confirmed save/resume and recorded results. Any certificate follows its configured passed-completion and grade conditions.

Open the public interactive practice copy; public practice is separate from the LMS record.

Sources and learning provenance

Original fictional cases are paired with public SHAREhub teaching and structured topic records. Use the applicable jurisdiction and primary guidance for live work.

Topic sections, source identities and versions
Public topicChunk and versionJurisdiction and sources
isocyanate-asthma · controlsisocyanate-asthma--controls
Great Britain, Northern Ireland
isoas-legacy-01, isoas-legacy-04
lev-local-exhaust-ventilation · control-hierarchylev-local-exhaust-ventilation--control-hierarchy
2026-10-02-additive-1
Great Britain, Northern Ireland
lev-local-exhaust-ventilation-src-01
ventilation-local-exhaust-ventilation-and-workplace-air-control · failure-exampleventilation-local-exhaust-ventilation-and-workplace-air-control--failure-example
20261019-V-review-1
Great Britain, Northern Ireland
source-hse_faq, source-hse_good, source-hse_user
coshh-control-measures-and-health-surveillance · controlscoshh-control-measures-and-health-surveillance--controls
20261016-letter-review-1
Great Britain, Northern Ireland
source-coshh-hse-control, source-coshh-hse-spray, source-coshh-ni-coshh, source-coshh-hierarchy, source-coshh-mr2, source-coshh-lev-commission, share-hierarchy-iosh
flammable-and-explosive-materials-and-dsear · controlsflammable-and-explosive-materials-and-dsear--controls
20261016-letter-review-1
Great Britain
hse-fireandexplosion-dsear-background-htm
health-surveillance-medical-records-and-biological-monitoring · biological-monitoringhealth-surveillance-medical-records-and-biological-monitoring--biological-monitoring
Great Britain, Northern Ireland
source-hse-biological, source-ni-coshh, source-hse-isocyanate

Course SH-GAR-05 · version 2026.10.20.1. .

Questions about this course

Is this training free?

Full public teaching and readers are free without an account. A free learner account is required for saved LMS progress and recorded assessment. Completion and any course-completion certificate depend on the configured LMS conditions.

How long should I allow?

Approximately 110–175 minutes, including teaching, lesson checks, required activities, model or accessible practice and one assessment attempt. Individual pace, review and retries vary. Save and resume in the LMS.

Can I learn without a 3D-capable browser?

Yes. The complete HTML reader provides the teaching. Required model practice has an equivalent accessible decision route in the interactive course. Use the LMS route for recorded learning.

What is required to pass?

Complete the required learning, activities, practice and lesson decisions. The 16-question final assessment requires at least 80% plus every designated critical safety answer. Points cannot compensate for a critical safety error. Follow the feedback before retrying.

Does this authorise garage operations?

Independent awareness and decision learning for vehicle repair. Practical competence, EV high-voltage work, asbestos work and other specialist tasks require separate training and authorisation. GB baseline; check corresponding Northern Ireland duties and local arrangements. This independent course does not award an external qualification or replace competent task assessment, practical training or site authorisation.