SHAREhub

Farm safety / Bales, transport loads and safe clamp access

Farm safety · SH-FARM-05

Bales, transport loads and safe clamp access

Illustrative farm context with a tractor, farm buildings and livestock
Illustrative workplace context for this course.

Free online training · Approximate learning time: 90–150 minutes · Self-paced

Keep stored and transported loads stable through every transition

£0Free training
Approx. 90–150 minutesEstimated active learning
12 lessons5 modules
20 questionsFinal assessment
Open this course in the LMS →

Full public teaching and readers are free without an account. A free learner account is required for saved LMS progress and recorded assessment. Completion and any course-completion certificate depend on the configured LMS conditions.

Who this course is for

Workers and supervisors planning bale storage, loading, clamp access and heavy-wheel movement.

Follow how load shape, support, restraints, ground and changing access can expose people to collapse or falls. The course teaches planning and verification decisions rather than forklift operation, lifting-equipment selection or stack engineering.

Great Britain farm-work awareness. Confirm the relevant national fire, environmental and pesticide route. Specialist livestock, machinery, electrical, work-at-height, pesticide, confined-space and rescue tasks require their actual competent assessment and authorisation; this course confers none.

Learning outcomes

Course outline

Module 1

Understand weight and stability

  1. A stack’s history matters as well as its appearanceRecognise collapse concerns without testing an unstable stack.
  2. A loading plan starts before the first baleMatch vehicle, load, ground and protected positions.
Module 2

Plan loading and restraint

  1. Restraint must control the journey and the arrivalCheck the secured load before movement and unloading.
  2. Clamp work must not depend on an exposed edgeAvoid falls when handling sheets or checking the clamp.
Module 3

Protect clamp and wheel work

  1. A heavy wheel needs restraint through storage and movementKeep people out of the toppling path.
  2. Storage changes need a fresh readiness decisionJoin stability, access and work coordination in the handover.
  3. Keep people outside an unstable bale stackDo not collect the product by entering the failure zone.
  4. Secure the bale load before any movementDeparture is a release decision that requires a secured load.
Module 4

Practise load decisions

  1. Avoid exposure at the silage clamp edgeSmall adjustments still require a planned working position.
  2. Restrain heavy wheels and sparesA clear route and stable storage must be achieved together.
Module 5

Verify storage and handover

  1. The late bale collectionControl loading, travel and storage without improvised support.
  2. Take a verified action into the workplaceConnect one actual task to an owner, evidence and a clear release or escalation decision.

Activities, model practice and assessment

Work through 5 required applied activities and 3 model-practice pauses, with explanatory feedback and independent lesson decisions. Complete 4 distinct model mission sequences across those pauses. Use the actual fictional mixed farm model or its equivalent accessible route to complete the required decision sequences; launching the model alone does not complete practice.

The 20-question assessment requires at least 80% plus every designated critical safety answer. Complete the required activities, practice and lesson checks. Points and badges cannot offset a critical safety error.

Use the LMS for confirmed save/resume and recorded results. Any certificate follows its configured passed-completion and grade conditions.

Open the public interactive practice copy; public practice is separate from the LMS record.

Sources and learning provenance

Original fictional cases are paired with public SHAREhub teaching and structured topic records. Use the applicable jurisdiction and primary guidance for live work.

Topic sections, source identities and versions
Public topicChunk and versionJurisdiction and sources
manual-handling · failure-modesmanual-handling--failure-modes
2.0
Great Britain, Northern Ireland
hse-l23, hse-toolfaq
safe-movement-of-people-and-vehicles-in-the-workplace · safe-site-safe-vehicle-safe-driversafe-movement-of-people-and-vehicles-in-the-workplace--safe-site-safe-vehicle-safe-driver
2.3
Great Britain, Northern Ireland
safe-movement-of-people-and-vehicles-in-the-workplace--handling, safe-movement-of-people-and-vehicles-in-the-workplace--hsg136, safe-movement-of-people-and-vehicles-in-the-workplace--loading
working-at-height · harm-mechanismsworking-at-height--harm-mechanisms
4.0
Great Britain, Northern Ireland
source-hse_intro, source-hse_roof, source-ni_hseni
manual-handling · technical-modelmanual-handling--technical-model
2.0
Great Britain, Northern Ireland
hse-l23, hse-manual, hseni-manual
hazard-identification-and-risk-assessment-foundations · warning-signshazard-identification-and-risk-assessment-foundations--warning-signs
Great Britain, Northern Ireland
source-hse-risk, source-hseni-risk
maintenance-inspection-and-testing-of-work-equipment-and-machinery · safe-maintenancemaintenance-inspection-and-testing-of-work-equipment-and-machinery--safe-maintenance
2.0
Great Britain, Northern Ireland
hse-maint, hse-l22
loading-unloading-and-transfer-operations · packaged-load-interfaceloading-unloading-and-transfer-operations--packaged-load-interface
2026-10-02-additive-1
Great Britain
loading-unloading-and-transfer-operations-src-02, loading-unloading-and-transfer-operations-src-04, loading-unloading-and-transfer-operations-src-03
working-at-height · hierarchyworking-at-height--hierarchy
4.0
Great Britain, Northern Ireland
source-gb_law, source-ni_law, source-hse_intro, source-hse_assess
manual-handling · tile-tileo-tileemanual-handling--tile-tileo-tilee
2.0
Great Britain, Northern Ireland
hse-l23, hse-manual
hazard-identification-and-risk-assessment-foundations · barriershazard-identification-and-risk-assessment-foundations--barriers
Great Britain, Northern Ireland
source-hse-risk, source-hseni-risk, source-hse-hsg254

Course SH-FARM-05 · version 2026.10.20.2. .

Questions about this course

Is this training free?

Full public teaching and readers are free without an account. A free learner account is required for saved LMS progress and recorded assessment. Completion and any course-completion certificate depend on the configured LMS conditions.

How long should I allow?

Approximately 90–150 minutes, including teaching, lesson checks, required activities, model or accessible practice and one assessment attempt. Individual pace, review and retries vary. Save and resume in the LMS.

Can I learn without a 3D-capable browser?

Yes. The complete HTML reader provides the teaching. Required model practice has an equivalent accessible decision route in the interactive course. Use the LMS route for recorded learning.

What is required to pass?

Complete the required learning, activities, practice and lesson decisions. The 20-question final assessment requires at least 80% plus every designated critical safety answer. Points cannot compensate for a critical safety error. Follow the feedback before retrying.

Does this authorise farm operations?

Great Britain farm-work awareness. Confirm the relevant national fire, environmental and pesticide route. Specialist livestock, machinery, electrical, work-at-height, pesticide, confined-space and rescue tasks require their actual competent assessment and authorisation; this course confers none. This independent course does not award an external qualification or replace competent task assessment, practical training or site authorisation.

Which manual handling assessments will you learn to use?

TILEO helps you review the wider task; MAC supports appropriate lifting, carrying and team handling of inanimate loads; RAPP supports appropriate pushing and pulling.

These aids support the activity assessment. Repetitive upper-limb work may need ART; variable or complex tasks may need other HSE tools or a fuller competent assessment. Mechanical lifting, stored energy, equipment safety and health decisions retain their separate controls. A low factor score, a downloaded report or completion of this course does not approve the work.

This additional teaching takes about 2–5 minutes, in addition to the course estimate. Optional reading and workplace assessment take additional time.

Learn how to select the method, use separate reports for mixed tasks, add a company logo and keep editable Word or PDF records. After a saved pass, the course offers a direct route to the assessment tools. Workplace assessment and practical competence remain separate from course completion.

Read the assessment tools and records guide