SHAREhub

Warehouse and logistics / Warehouse plant, utilities and hidden hazards

Warehouse and logistics · SH-WH-10

Warehouse plant, utilities and hidden hazards

Actual SHAREsimulate warehouse: utilities
Illustrative workplace context for this course.

Free online training · Approximate learning time: 130–200 minutes · Self-paced

Recognise work that needs specialist control

£0Free training
Approx. 2h 10m–3h 20mEstimated active learning
9 lessons5 modules
20 questionsFinal assessment
Open this course in the LMS →

Full public teaching and readers are free without an account. A free learner account is required for saved LMS progress and recorded assessment. Completion and any course-completion certificate depend on the configured LMS conditions.

Who this course is for

Warehouse workers, team leaders, supervisors and others who plan or support these tasks.

Connect confined spaces, asbestos, pressure, gas and water systems.

Independent warehouse awareness and decision practice for a GB baseline; check corresponding Northern Ireland duties and site arrangements. Completion is not practical competence, a licence or authority for specialist work.

Learning outcomes

Course outline

Module 1

Understand the work

  1. A small job can cross a major safety boundaryRecognise when a plant task involves specialist hazards or restricted work.
  2. Find the system information before startingUse the correct system information before disturbance, entry or intervention.
Module 2

Spot the developing risk

  1. A sump inspection proposed as a quick entryDo not enter or attempt an unplanned rescue. Keep access controlled and involve the competent site and emergency arrangements.
  2. Drilling without a survey for the workHold the intrusive work, prevent disturbance and have the responsible person obtain appropriate competent survey and work classification.
Module 3

Choose effective controls

  1. A pressure-system defect before useKeep people clear and stop the affected use; have authorised competent people secure the system and assess its condition.
  2. A faulty gas heater is left in serviceKeep away from suspected danger and use the site gas emergency arrangements; do not use or repair the faulty appliance yourself.
Module 4

Verify and practise

  1. An out-of-use water outlet is forgottenReport the control failure and have the responsible competent team assess the system and a suitable safe response before normal affected use.
Module 5

Bring the evidence together

  1. Shift handover: connect the hazardsDefend the stopping condition and the evidence needed for release.
  2. Your workplace transfer challengeTurn one lesson into a bounded check with an owner and a review trigger.

Activities, model practice and assessment

Work through 8 required applied activities and 5 model-practice pauses, with explanatory feedback and independent lesson decisions. Complete 5 distinct model mission sequences across those pauses. Use the actual fictional warehouse model or its equivalent accessible route to complete the required decision sequences; launching the model alone does not complete practice.

The 20-question assessment requires at least 80% plus every designated critical safety answer. Complete the required activities, practice and lesson checks. Points and badges cannot offset a critical safety error.

Use the LMS for confirmed save/resume and recorded results. Any certificate follows its configured passed-completion and grade conditions.

Open the public interactive practice copy; public practice is separate from the LMS record.

Sources and learning provenance

Original fictional cases are paired with public SHAREhub teaching and structured topic records. Use the applicable jurisdiction and primary guidance for live work.

Topic sections, source identities and versions
Public topicChunk and versionJurisdiction and sources
confined-spaces · what-is-itconfined-spaces--what-is-it
20261016-letter-review-1
Great Britain, Northern Ireland
source-conf-hse-l101, source-conf-hse-law, source-conf-ni-law, source-conf-ni-acop
asbestos-risk-management-and-compliance · what-is-itasbestos-risk-management-and-compliance--what-is-it
20261016-letter-review-1
Great Britain, Northern Ireland
hse-duty, hse-register, hse-plan, l143, hseni
confined-spaces · ericpdconfined-spaces--ericpd
20261016-letter-review-1
Great Britain, Northern Ireland
source-conf-hse-l101, source-conf-ni-acop, source-conf-hse-hierarchy, source-conf-hse-l101-pdf, source-conf-hse-hypoxic, share-hierarchy-iosh
asbestos-risk-management-and-compliance · controlsasbestos-risk-management-and-compliance--controls
20261016-letter-review-1
Great Britain, Northern Ireland
hse-duty, hse-register, hse-plan, l143, hseni, share-hierarchy-hse, share-hierarchy-iosh
work-equipment-lifting-equipment-and-pressure-systems · first-actionswork-equipment-lifting-equipment-and-pressure-systems--first-actions
3.0
Great Britain, Northern Ireland
source-indg229, source-puwer_use, source-gb_puwer, source-ni_puwer, source-l22, source-introduction, source-gb_market, source-ni_market, source-sector_products
work-equipment-lifting-equipment-and-pressure-systems · control-prioritieswork-equipment-lifting-equipment-and-pressure-systems--control-priorities
3.0
Great Britain, Northern Ireland
source-hse_ppe_hierarchy, source-loler_plan, source-pssr_use, source-l122, source-l113, source-maintenance, source-loler_exam
gas-safety · meaninggas-safety--meaning
2.4
Great Britain, Northern Ireland
src-gas-l56, src-gas-employers, src-gas-ni-catering, src-gas-ni-law
gas-safety · controlsgas-safety--controls
2.4
Great Britain, Northern Ireland
src-gas-l56, src-gas-dsear, src-gas-indg297, src-gas-hsg139
legionella-management · boundarylegionella-management--boundary
2026-10-02-additive-1
Great Britain, Northern Ireland
legionella-management-src-01, l-review-legionella-management-2-1
legionella-management · recordslegionella-management--records
2026-10-02-additive-1
Great Britain, Northern Ireland
legionella-management-src-05

Course SH-WH-10 · version 2026.10.20.2. .

Questions about this course

Is this training free?

Full public teaching and readers are free without an account. A free learner account is required for saved LMS progress and recorded assessment. Completion and any course-completion certificate depend on the configured LMS conditions.

How long should I allow?

Approximately 130–200 minutes, including teaching, lesson checks, required activities, model or accessible practice and one assessment attempt. Individual pace, review and retries vary. Save and resume in the LMS.

Can I learn without a 3D-capable browser?

Yes. The complete HTML reader provides the teaching. Required model practice has an equivalent accessible decision route in the interactive course. Use the LMS route for recorded learning.

What is required to pass?

Complete the required learning, activities, practice and lesson decisions. The 20-question final assessment requires at least 80% plus every designated critical safety answer. Points cannot compensate for a critical safety error. Follow the feedback before retrying.

Does this authorise warehouse operations?

Independent warehouse awareness and decision practice for a GB baseline; check corresponding Northern Ireland duties and site arrangements. Completion is not practical competence, a licence or authority for specialist work. This independent course does not award an external qualification or replace competent task assessment, practical training or site authorisation.