APPLY THE LEARNING

Workplace practice sheets

Use the fictional evidence in your own notes. The exercises do not create or approve operational records.

Hot-work pathway exercise

For the partition repair, compare a suitable cold alternative, identify actual fuel and residue uncertainties, follow heat and sparks to adjacent areas, and set the competent evidence, watch and handback questions.

  1. Fictional exercise: A repair is proposed near a line and a partition with hidden spaces. The crew has a permit form, but residue information, adjacent work and fire-watch cover need confirmation.
  2. For the partition repair, compare a suitable cold alternative, identify actual fuel and residue uncertainties, follow heat and sparks to adjacent areas, and set the competent evidence, watch and handback questions.
  3. Make three columns: observed facts, missing evidence and the responsible action. State the condition that prevents starting or requires stopping, and the verification needed before release. Do not invent results or approvals.

Open the live SHAREhub resource ↗

Optional extension. Live SHAREhub tools may need a separate sign-in. The included exercise works offline and submits no workplace record.

Optional visual practice and worked application

Use these fictional exercises to compare evidence and rehearse decisions. They do not alter course completion or assessment requirements. You can work through the same choices on paper.

Follow heat and particles rather than the tool label

Fictional continuing case. The contractor says the added grinder uses no naked flame. The visible work area is tidy but the new opening leads towards concealed insulation.

Trace the ignition path

Hot fragments and heat can reach fuel without a naked flame. Consider the full affected area, adjacent spaces and hidden pathways rather than the tool brand or cleared visible surface alone.

Consider the stronger alternative

Assess a suitable no-hot-work or safer-location method before proceeding with the original permit. The alternative still needs control of its own hazards; cold does not mean harmless.

Worked planning note

Original task: defined cutting area. Changes: grinding direction, new opening and hidden combustible pathway. Decision: old acceptance does not cover the changed route. Review method, affected spaces and current authorisation before the extension.

Sort the hot-work planning evidence

Fictional worked application: A fictional refurbishment task initially proposes hot cutting beside a wall. A suitable cold alternative is available. After initial approval, grinding is added through an opening towards a room containing concealed combustible material, and another activity introduces a flammable release nearby. Stage evidence: The contractor says the added grinder uses no naked flame. The visible work area is tidy but the new opening leads towards concealed insulation.

Sort the hot-work planning evidence. Use the evidence in this stage, rather than assuming what happened off screen.

  • Hot fragments can pass through the new opening towards concealed fuel. Relevant heat/fuel/interface condition. The full affected pathway belongs in the review.
  • Another activity can create a nearby flammable release. Relevant heat/fuel/interface condition. This changes the combined operating conditions.
  • The grinder has no naked flame. Insufficient permission by itself. Heat and particles can still create ignition.
  • The old permit date remains current. Insufficient permission by itself. A date cannot accept a changed scope or fuel route.

Open this interactive lesson

Assess the full heat-to-fuel and hand-back pathway

Draw work area, adjacent rooms, hidden spaces and the heat/particle paths. Mark safer-method options, watchers, handover, changed-condition stop triggers and separate post-work/restoration checks. Invent no fixed watch time or operating approval.

Draw work area, adjacent rooms, hidden spaces and the heat/particle paths. Mark safer-method options, watchers, handover, changed-condition stop triggers and separate post-work/restoration checks. Invent no fixed watch time or operating approval.

Use only a fictional or authorised non-confidential example. Keep planned actions separate from verified current protection.

A saved practice entry does not alter the graded course or authorise work.

Maintain the agreed watch through the handover

Fictional continuing case. A relief watcher arrives without receiving hidden-area checks or alarm arrangements. A cleaning certificate records washing but not the present condition needed for applying heat.

Evidence has a defined purpose

The cleaning record proves what was documented within its scope. It does not establish every current hot-work condition or permit a little heat as a diagnostic test.

Task-specific continuity

A watcher needs the competent task-specific handover and applicable alarm/response arrangements. Continuous presence by an uninformed person is not the same protective function.

Set conditions from the actual task

Post-work monitoring and reinspection arrangements depend on the task, hidden ignition potential and applicable guidance. This exercise gives no universal watch duration or contractor departure rule.

Choose what must be resolved before reliance on the watch

Fictional worked application: A fictional refurbishment task initially proposes hot cutting beside a wall. A suitable cold alternative is available. After initial approval, grinding is added through an opening towards a room containing concealed combustible material, and another activity introduces a flammable release nearby. Stage evidence: A relief watcher arrives without receiving hidden-area checks or alarm arrangements. A cleaning certificate records washing but not the present condition needed for applying heat.

Choose what must be resolved before reliance on the watch. Select every defensible evidence or action; leave unsupported substitutes unselected.

  • Transfer the actual hidden-area checks, alarm arrangements and relevant task conditions to the relief role. Relevant evidence. The agreed watch depends on competent task understanding.
  • Establish the present required heat-work conditions through the proper responsible verification. Relevant evidence. A washing certificate alone has limited scope.
  • Apply a little heat to find out whether the washed item is ready. Insufficient evidence. The proposed test creates the ignition risk rather than supplies the required evidence.
  • Use one generic watch time for every area because it makes scheduling easier. Insufficient evidence. The actual task and hidden ignition potential determine the suitable arrangement.

Open this interactive lesson

Assess the full heat-to-fuel and hand-back pathway

Draw work area, adjacent rooms, hidden spaces and the heat/particle paths. Mark safer-method options, watchers, handover, changed-condition stop triggers and separate post-work/restoration checks. Invent no fixed watch time or operating approval.

Draw work area, adjacent rooms, hidden spaces and the heat/particle paths. Mark safer-method options, watchers, handover, changed-condition stop triggers and separate post-work/restoration checks. Invent no fixed watch time or operating approval.

Use only a fictional or authorised non-confidential example. Keep planned actions separate from verified current protection.

A saved practice entry does not alter the graded course or authorise work.

Stop on a new release and hand back every affected function

Fictional continuing case. A nearby flammable release starts after hot work begins. Later, accepted fire checks are complete but a protective arrangement isolated for the repair remains unrestored.

Changed conditions require action

Stop the affected task and reassess the combined work through the site system. Original signatures do not address the newly introduced release.

Restoration is a separate condition

An accepted post-work fire check does not restore every other protective function. State the outstanding restoration, restriction and required verification in hand-back.

Current item-specific planning

A similar-looking component can have different contents. Reusing an old permit requires actual current assessment, preparation and verification, not matching the signature style.

Follow the hot-work change through hand-back

Fictional worked application: A fictional refurbishment task initially proposes hot cutting beside a wall. A suitable cold alternative is available. After initial approval, grinding is added through an opening towards a room containing concealed combustible material, and another activity introduces a flammable release nearby. Stage evidence: A nearby flammable release starts after hot work begins. Later, accepted fire checks are complete but a protective arrangement isolated for the repair remains unrestored.

Are current heat, fuel and adjacent-work conditions within the accepted task basis?

  • Are current heat, fuel and adjacent-work conditions within the accepted task basis?
    • No / not established in this case: The new release or concealed pathway changes the original acceptance. Next: Current decision — Stop the affected task and obtain current reassessment/authorisation.
    • Yes, supported by the stated evidence: Proceed to the separate verification question; the first condition alone is not the final decision. Next: Are post-work checks and all separately required protective restorations accepted?
  • Current decision

    Stop the affected task and obtain current reassessment/authorisation.

  • Are post-work checks and all separately required protective restorations accepted?
    • The relevant evidence is still missing: Retain the separate restoration restriction until its verification and release. Next: Verification still required — Retain the separate restoration restriction until its verification and release.
    • Yes, the responsible check is evidenced within its scope: Record the actual accepted area state and any continuing limits. Next: Scoped decision supported — Record the actual accepted area state and any continuing limits.
  • Verification still required

    Retain the separate restoration restriction until its verification and release.

  • Scoped decision supported

    Record the actual accepted area state and any continuing limits.

Open this interactive lesson

Assess the full heat-to-fuel and hand-back pathway

Draw work area, adjacent rooms, hidden spaces and the heat/particle paths. Mark safer-method options, watchers, handover, changed-condition stop triggers and separate post-work/restoration checks. Invent no fixed watch time or operating approval.

Draw work area, adjacent rooms, hidden spaces and the heat/particle paths. Mark safer-method options, watchers, handover, changed-condition stop triggers and separate post-work/restoration checks. Invent no fixed watch time or operating approval.

Use only a fictional or authorised non-confidential example. Keep planned actions separate from verified current protection.

A saved practice entry does not alter the graded course or authorise work.

Optional choices save on this browser, separately from recorded course progress. Live tools retain their own access and competent-review requirements.