APPLY THE LEARNING

Workplace practice sheets

Use the fictional evidence in your own notes. The exercises do not create or approve operational records.

Optional stockroom fire-control review

Map a fictional storage change through prevention, containment, warning and escape. Keep it a fictional learning exercise; do not submit a real form, assign actions or issue approval.

  1. Identify one fuel/ignition interface and one route or fire-door vulnerability.
  2. Propose stronger prevention and identify which defects need competent premises review.
  3. Write what evidence and briefing would be needed before accepting the changed arrangement; issue no real approval.

Open the live SHAREhub resource ↗

Optional extension. Live SHAREhub tools may need a separate sign-in. The included exercise works offline and submits no workplace record.

Optional visual practice: revisit the reasoning

These supplementary examples reuse SHAREhub Knowledge teaching. They are unmarked and do not alter your course requirements. Use the same statements and branches on paper, then compare the explanations.

Connect ignition, fuel and people

Inspect the delivery-stock scene and use the labels to ask where ordinary work could combine ignition, fuel and an affected route. No active fire or heater state is shown.

Find the combination

The relevant question is how the actual task brings a source of ignition, fuel and oxygen together, rather than simply naming a triangle.

Look beyond the item

Nearby packaging, openings and escape arrangements can change the potential consequence of a small initial source.

Keep uncertainty visible

The scene identifies questions. It cannot establish energisation, safe clearance, warning reception or whether a door operates properly.

Match the fire-planning clue

Fictional example: Fictional practice: A fictional stockroom receives extra packaging while heating and escape arrangements are being reviewed.

Match each clue to its primary planning question.

  • The way portable heating is supplied and controlled. Ignition source: Examine the actual heat/ignition source and its suitability; the picture does not show its state.
  • Additional packaging and stock in the room. Fuel inventory: Material quantity and arrangement can affect a fire scenario.
  • Whether workers can recognise a warning and use the intended route. People and escape: Warning and escape require usable arrangements, not just a sign or a drawn gap.

Open the interactive lesson

Change the combination before relying on response

Explore the stockroom control hierarchy. Compare changes that avoid the hazard with supporting controls; firefighting equipment is not a replacement for prevention.

Avoid unnecessary hazards

Remove unnecessary combustible stock or ignition sources, or use a suitable safer method where practicable. Check that changes do not introduce another risk.

Make storage workable

Control quantities, separation, deliveries and waste through a layout and process people can use at busy times.

Support the arrangement

Instructions, checks and response equipment have roles, but they cannot compensate for fuel and ignition being left uncontrolled.

Sort the stockroom proposals

Fictional example: Fictional practice: A fictional team has no practical place for newly delivered packaging except beside a heater and route.

Group the proposals by their primary effect.

  • Redesign the delivery/storage arrangement and remove unnecessary combustible accumulation. Avoid or redesign the hazardous combination: This tackles the way the hazard is recreated in normal work.
  • Brief the revised usable layout and check it during busy deliveries. Support a suitable arrangement: Information and verification help sustain the changed arrangement.
  • Keep the same congested arrangement and add another warning notice. Leaves the problem unresolved: A notice alone does not remove fuel, ignition or route problems.

Open the interactive lesson

Keep containment and escape checks distinct

Use the planned-change map to consider how smoke and fire can affect other places. A closed pictured door does not prove its rating, operation or suitability.

Fire and smoke can travel

Open doors, damaged barriers, service penetrations and voids can undermine the intended protection and affect an escape route.

Report impaired protection

A damaged closer or unsealed opening needs the responsible response and competent restoration. An ordinary repair is not automatically a verified fire-resisting repair.

Check after change

Deliveries or alterations can affect route use and protective boundaries together. Verify the actual changed arrangement, not a sign or assumed plan.

Select evidence for the changed stockroom

Fictional example: Fictional practice: A fictional delivery change raises concerns about the route and a door closer.

Select every useful check or response.

  • Report the door problem through the premises defect and impairment route. A protective failure is a current issue that needs a suitable response.
  • Check the actual route, door use and people affected by the change. The change must be tested against the real premises arrangement.
  • Assume a protected-route sign proves the whole route remains protected. A label cannot establish that the protective function still works.
  • Obtain appropriate restoration evidence and inform relevant workers. Correction and communication support controlled return and continued use.

Open the interactive lesson

Put the actual emergency first

The red emergency line on the diagram is separate from the planned stock-change review. Smoke or an alarm uses the real premises arrangements without waiting for paperwork.

Know the warning and route

Workers need the local warning, relevant usable routes, reporting and assembly arrangements before an incident occurs.

Plan for the people present

New starters, visitors, isolated workers and people needing assistance can require specific arrangements. The course does not select an evacuation strategy.

Communicate from safety

Use the incident plan for emergency calls and missing-person information. Do not delay for belongings, investigate smoke or re-enter without the plan’s authority.

Explore emergency versus planned change

Fictional example: Fictional practice: A fictional stockroom review is under way when either an alarm occurs or a planned route issue is identified.

Choose the path that fits the situation.

  • Is there smoke, an alarm or another actual emergency indication?
    • Yes.: Use the actual premises emergency arrangements immediately; do not finish the review first. Next: Follow the real emergency plan — Raise the alarm or respond to the warning, reach the planned place of safety and report as instructed. Do not wait for a form, collect property or investigate smoke.
    • No; this is a planned-change concern.: A non-emergency change still needs its controls reviewed before reliance on them. Next: Does the planned change affect warning, escape or assistance arrangements?
  • Does the planned change affect warning, escape or assistance arrangements?
    • Yes or unknown.: Obtain the responsible premises review and suitable protective arrangements. Next: Resolve the changed basis — The responsible person decides the appropriate restriction, review and correction. An ordinary worker does not invent a replacement evacuation strategy.
    • No, and the actual arrangement is confirmed.: Maintain the established arrangements and report further changes. Next: Keep the confirmed arrangement effective — Continue the actual checks and information route. A fictional flow does not establish the premises are safe.
  • Follow the real emergency plan

    Raise the alarm or respond to the warning, reach the planned place of safety and report as instructed. Do not wait for a form, collect property or investigate smoke.

  • Resolve the changed basis

    The responsible person decides the appropriate restriction, review and correction. An ordinary worker does not invent a replacement evacuation strategy.

  • Keep the confirmed arrangement effective

    Continue the actual checks and information route. A fictional flow does not establish the premises are safe.

Open the interactive lesson

Separate awareness from assigned response roles

Inspect the equipment-review photograph as context for role boundaries. Equipment beside a door does not create an obligation for an untrained worker to use it.

Ordinary awareness

Recognise hazards, raise concerns and follow the local emergency plan. It does not confer firefighting or smoke-entry competence.

Assigned trained roles

A warden or other assigned role needs defined duties, limits, suitable training and an arrangement that fits actual staffing.

Information can help without entry

Relevant observations can be passed from safety to the incident lead. A missing-person report does not authorise an unsafe personal search.

Match the action to its boundary

Fictional example: Fictional practice: A fictional induction explains who does what during an incident.

Match each statement to the relevant boundary.

  • Raise concerns and follow the premises warning and escape instructions. Ordinary awareness within the plan: This is part of awareness, using the actual premises arrangement.
  • Carry out specifically assigned duties after suitable role training and planning. Assigned trained role within its limits: A named role still has limits and must not endanger escape.
  • Enter smoke to recover property because an extinguisher is nearby. Outside this course’s authority: The presence of equipment is not competence or permission to enter danger.

Open the interactive lesson

Verify recovery after a control failure

Use the stock-change diagram to compare reporting, protective action and verified return. A repaired item or completed form is only part of the required evidence.

Treat the failure now

A blocked exit, failed warning or damaged protective door needs a prompt response through the site arrangement rather than waiting for a periodic inspection.

Use the responsible decision

Affected work may need restriction, change, competent help or an emergency response depending on the actual failure and exposure.

Check the restored function

Verify the correction in the changed layout and communicate what affected workers need to know. Do not assume that recording completion establishes effectiveness.

Explore the recovery decision

Fictional example: Fictional practice: A fictional premises team is told that a protective door problem has been fixed after a delivery change.

Trace what is still needed before normal reliance on that function.

  • Has the actual protective function been restored and appropriately verified?
    • Not yet, or evidence is uncertain.: Keep the impairment controlled through the responsible premises arrangements. Next: Keep the issue open under the responsible arrangement — Obtain the missing competent review, correction or communication. The appropriate person decides restrictions; the learner does not authorise a new fire strategy.
    • Yes, with suitable evidence.: Correction still needs to fit the changed layout and information needs. Next: Have affected use, access and relevant workers been considered?
  • Have affected use, access and relevant workers been considered?
    • No or unknown.: A restored part alone may not resolve the wider changed arrangement. Next: Keep the issue open under the responsible arrangement — Obtain the missing competent review, correction or communication. The appropriate person decides restrictions; the learner does not authorise a new fire strategy.
    • Yes, the actual arrangement and communication are confirmed.: Retain the evidence and route for further change or failure. Next: Retain and review the evidence — Record the correction, who confirmed the function and what was communicated. Continue normal checks and re-open when conditions change.
  • Keep the issue open under the responsible arrangement

    Obtain the missing competent review, correction or communication. The appropriate person decides restrictions; the learner does not authorise a new fire strategy.

  • Retain and review the evidence

    Record the correction, who confirmed the function and what was communicated. Continue normal checks and re-open when conditions change.

Open the interactive lesson

Optional choices in the player are saved on this browser. They are separate from formal assessment results and records.

SHAREhub home

Extinguisher recognition: optional matching and decisions

Use the illustrated reference in the response-boundary lesson, then try the matching games and response pathway. They are available within Free course access and do not change the original assessment, completion or monthly allowance. Allow20–30 optional minutes to use the full reference and exercises.

Open the response-boundary lesson and extinguisher games

Match the fuel to its fire class: paper alternative and worked reasoning

Self-study only: read each statement, choose its class/application from the reference and then compare below. No response is submitted or marked.

  1. Burning wood, paper and fabric

    Class A · solids. Class A is solid fuel. Cooling is important; the actual A rating still matters.

  2. A pool of burning solvent

    Class B · liquids. Class B concerns flammable liquids. The agent must suit the solvent; a jet may spread burning liquid.

  3. Burning propane escaping from a pipe

    Class C · gases. Class C is gas in UK classification. Flame knock-down while fuel escapes can create an explosive cloud; this is a specialist response.

  4. Burning magnesium swarf

    Class D · metals. Class D is combustible metal. Use metal-specific specialist selection, never ordinary ABC powder by assumption.

  5. Hot cooking oil burning in a fryer

    Class F · cooking oils/fats. Class F is cooking oils/fats. Ordinary water can eject burning oil violently.

  6. A lithium-ion tool battery in thermal runaway

    Class L · lithium-ion. Class L is lithium-ion battery fire in the 2026 classification. It differs from metallic-lithium Class D and needs a specialist plan.

Match the extinguisher to its application and limits: paper alternative and worked reasoning

Self-study only: read each statement, choose its class/application from the reference and then compare below. No response is submitted or marked.

  1. Water

    Normally A · cooling ordinary solid fuel; not live electricity or cooking oil. Cools burning solid material such as paper, wood or fabric. Ordinary water is unsuitable for live electrical equipment, flammable-liquid pools, cooking oil and reactive metals: shock, spreading fuel or violent reaction can result.

  2. Foam

    Commonly A/B · compatible foam for the actual liquid; not a universal solvent choice. Cools and forms a surface blanket on suitable liquid fires. The agent must suit the actual fuel; some alcohols need alcohol-resistant foam. Ordinary foam is not a general answer for live electricity, cooking oil or metal fires. Unsuitable foam may break down on a solvent; a jet can spread fuel. Free-flowing fuel needs specialist response.

  3. Carbon dioxide (CO₂)

    B and labelled electrical application · low residue, poor cooling and enclosed-space hazard. Displaces the atmosphere around a small flame and leaves no powder residue. Often selected around electrical equipment. Poor cooling means reignition is possible. CO₂ can create a dangerous atmosphere in enclosed spaces; discharge can cause frostbite. Hold only the designated insulated parts. Not a cooking-oil or metal-fire substitute.

  4. Wet chemical

    F-rated cooking-oil application · A or other uses only if expressly rated. Cools cooking oil and creates a protective surface layer through reaction with the fat. Use only within the actual unit’s rating and instructions. Do not mistake it for a general liquid-fire or electrical extinguisher. Incorrect application or moving the fryer can splash hot oil; apparent flame-out does not establish safe temperature.

  5. Class D specialist powder

    D · specialist powder chosen for the exact burning metal. A specialist powder can isolate or absorb heat from a compatible burning metal. Selection requires knowledge of the metal and its form. The wrong powder can fail or react. Water, foam and CO₂ can be dangerous on certain burning metals. A powder suitable for magnesium is not automatically suitable for metallic lithium.

  6. Battery-specific suppression products

    Specified lithium-ion scenario only · chemistry, capacity and test limits; specialist response. Some products use water-based cooling or specialist media such as aqueous vermiculite for specified battery scenarios. Selection depends on chemistry, capacity and location. A ‘lithium’ label is not proof it will stop thermal runaway in a large pack. Flame suppression may not prevent reignition or gas release. Do not approach, carry or submerge a failing battery as a learner exercise.

Response pathway: all branches in text

Has the alarm been raised and the actual evacuation/calling plan started?

No / unsure: Raise the alarm and follow the premises plan. Do not delay escape to fetch equipment.

Yes: The alarm/calling response is under way.

Are you separately trained and authorised for this exact limited response?

No / unsure: Withdraw and report from safety. A warden title or this exercise does not provide operating competence.

Yes: Separate training and authority are confirmed for the scenario.

Is the fire small and initial, without smoke or spread threatening a clear escape behind you?

No / unsure: Withdraw, warn and report. Do not enter smoke or keep trying as the fire develops.

Yes: The scenario supplies safe initial conditions and an escape route.

Does the actual unit label match the fuel, any electrical hazard and the site plan, without a gas/metal/battery uncertainty?

No / unsure: Do not improvise. Withdraw and report the specific uncertainty for competent/specialist response.

Yes: Only the separately trained, authorised response within actual instructions may be considered. Any doubt or change means withdraw. This exercise gives no operating authorisation.