APPLY THE LEARNING

Workplace practice sheets

Use the fictional evidence in your own notes. The exercises do not create or approve operational records.

Optional electrical-defect briefing

Create a fictional briefing for a portable cleaner moving from a dry office to a damp loading area. Keep it a fictional learning exercise; do not submit a real form, assign actions or issue approval.

  1. List the energy source, possible contact or fire route and people exposed.
  2. Separate user observations from the competent inspection, repair or isolation decisions.
  3. Name hold points and a safe reporting route; never write repair instructions or claim approval.

Open the live SHAREhub resource ↗

Optional extension. Live SHAREhub tools may need a separate sign-in. The included exercise works offline and submits no workplace record.

Optional visual practice: revisit the reasoning

These supplementary examples reuse SHAREhub Knowledge teaching. They are unmarked and do not alter your course requirements. Use the same statements and branches on paper, then compare the explanations.

Trace the electrical harm routes

Inspect the source-to-person diagram and separate different ways harm can occur. A visible switch or low apparent energy is not a complete safety assessment.

Contact and current

An electrical source can reach a person through a contact route. Actual conditions, including moisture and equipment condition, matter.

Heat, arc and ignition

Electrical faults can cause burns or ignite material. People nearby and combustible surroundings can be affected without ordinary direct contact.

Secondary effects

A shock or startle can lead to a fall or contact with another hazard. Awareness identifies the need for competent controls; it does not authorise electrical work.

Match the harm route

Fictional example: Fictional practice: A fictional review considers three different consequences of an electrical fault.

Identify the principal route described in each clue.

  • A person touches an energised damaged part. Contact current: This is a potential current-through-body route. Do not attempt a practical demonstration.
  • A fault heats material and starts a fire. Heat or ignition: This is an ignition/thermal pathway; it needs suitable prevention and response arrangements.
  • A person loses balance near an opening after a shock. Secondary injury: The secondary fall hazard can worsen the event and must be considered alongside electrical controls.

Open the interactive lesson

Keep a defect from becoming reuse

Inspect the staged damaged-lead example and distinguish what is visible from what needs a competent assessment. The unplugged teaching prop is not evidence about an actual item’s state.

Look beyond the sticker

Accessible leads, plugs, casing and surroundings can change after a past check. A label does not cancel present damage.

Keep the boundary clear

Ordinary users report concerns and use the defined equipment-control route. Opening parts, taping over damage or repeated resetting is not an awareness task.

Return is a separate decision

The appropriate competent person determines correction and the required verification. Reporting a fault is not the same as permission to use the equipment again.

Explore the defect decision

Fictional example: Fictional practice: Before a fictional task, a user notices damage to a flexible lead.

Separate the user’s response from the later competent return-to-use decision.

  • Is damage, abnormal condition or suitability in doubt?
    • Yes.: Treat the concern through the defined safe defect route. Next: Has the defined equipment-control route prevented inadvertent reuse?
    • No concern is found in the user check.: A user check has limits; continue only within the actual suitable arrangement. Next: Follow the actual use and maintenance arrangement — This planning path does not prove safety. Use suitable equipment and the workplace checks and reporting route.
  • Has the defined equipment-control route prevented inadvertent reuse?
    • No or unknown.: Report and keep affected use controlled through the workplace arrangement; do not handle unsafe exposed parts. Next: Keep affected use controlled — Do not improvise repair, tape over damage, open electrical parts or repeatedly reset protection. Obtain the responsible competent response.
    • Yes, affected use is controlled.: The next question concerns competent correction and verification, not another casual user check. Next: Has the responsible competent person authorised return on suitable evidence?
  • Has the responsible competent person authorised return on suitable evidence?
    • No.: A reported or tagged item remains out of use until the appropriate decision. Next: Keep affected use controlled — Do not improvise repair, tape over damage, open electrical parts or repeatedly reset protection. Obtain the responsible competent response.
    • Yes.: Use only within the confirmed conditions and normal checks. Next: Follow the actual use and maintenance arrangement — This planning path does not prove safety. Use suitable equipment and the workplace checks and reporting route.
  • Keep affected use controlled

    Do not improvise repair, tape over damage, open electrical parts or repeatedly reset protection. Obtain the responsible competent response.

  • Follow the actual use and maintenance arrangement

    This planning path does not prove safety. Use suitable equipment and the workplace checks and reporting route.

Open the interactive lesson

Match the work and the environment

Use the hierarchy to compare proposals for work near moisture and traffic. An additional protective device does not make unsuitable or damaged equipment acceptable.

The environment changes risk

Dampness, rough handling, traffic and washdown can change the suitability of a dry-room arrangement.

Choose the whole arrangement

The actual assessment covers method, equipment, supply and cable protection. Alternatives introduce their own task and battery or fire questions.

Use competent resolution

When conditions differ from the plan, hold affected use for the responsible review. The lesson does not teach selection or testing of electrical protection.

Sort environment proposals

Fictional example: Fictional practice: A fictional indoor power-tool arrangement is proposed for a damp loading area.

Group each proposal by what it actually achieves.

  • Obtain a suitable method, equipment and supply arrangement for the actual damp task. Changes or assesses the work arrangement: This addresses suitability at the planning stage; competent advice may be needed.
  • Protect and route leads as defined by the assessed method. Supports an established arrangement: Cable protection supports the whole suitable arrangement; it is not a substitute for it.
  • Use the damaged indoor lead carefully because a protective device is fitted. Does not resolve the concern: An additional device does not make damage or unsuitable conditions acceptable.

Open the interactive lesson

Understand the maintenance layers

Explore the review diagram and distinguish an ordinary user check from formal competent inspection and testing where justified. A universal annual sticker is not the maintenance system.

User checks

A user can identify obvious accessible damage and changed conditions after suitable instruction. This does not reveal every hidden fault.

Formal inspection and testing

Appropriate competent inspection and testing answer different condition questions. The need and frequency depend on actual equipment, use, environment and history.

Learn from defects

Recurring crushed leads can indicate a routing, storage or task-design problem. Replacing a label leaves that cause in place.

Match the maintenance evidence

Fictional example: Fictional practice: A fictional workshop reviews how three different checks contribute.

Match each example to its main role.

  • A user notices a cracked casing before use and reports it. User check: This is a useful visible-condition check with a clear defect route.
  • A person with the required competence examines and tests as justified by the risks. Competent inspection/testing: This is a competent condition check; the exercise does not confer that competence.
  • The manager analyses repeated cable damage and changes routing and handling. Review of the maintenance system: This reviews the system and addresses a repeated problem rather than relying on a date label.

Open the interactive lesson

Separate planned charging concerns from an emergency

Use the work-review diagram with the written battery case. Do not infer a battery state from the pictured equipment. Charging needs its own compatible equipment, location and response arrangements.

Plan charging

Use compatible equipment and the manufacturer’s instructions within the workplace arrangement. Protect batteries and leads from foreseeable damage.

Keep escape and combustibles in view

The location and unattended periods matter. Removing a trailing lead does not remove electrical, heat or fire concerns.

Recognise active failure

Abnormal heat, swelling, leakage or smoke needs the appropriate response. An active event is not a routine request to carry a damaged item elsewhere.

Choose the defensible charging responses

Fictional example: Fictional practice: A fictional team is reviewing a charging station beside delivery stock.

Select every appropriate planning or response statement.

  • Check compatibility and the manufacturer’s instructions for the charging arrangement. Compatibility and instructions are part of controlled charging.
  • Review stock, escape routes and foreseeable damage at the charging location. Charging must fit the actual surroundings and task.
  • Carry a smoking battery through occupied areas to the ordinary damaged-equipment box. An active failure needs the site emergency response; moving it can spread danger.
  • Report a damaged cool item through the defined competent handling/disposal route. A planned defect route differs from an active emergency and still needs competent arrangements.

Open the interactive lesson

Recognise the competent-work boundary

The diagram asks about all relevant sources and routes before work. A visible main switch, meter or lock is not proof that an ordinary learner can undertake isolation, testing or repair.

Hidden and alternative sources

Services may be concealed or the drawings incomplete. Another supply or retained energy can matter to a task-specific competent assessment.

Stop changed or uncertain work

Unexpected material or an uncertain service route needs the affected activity held for resolution before a revised method proceeds.

Emergency help without another casualty

Use the actual emergency plan and suitable specialist help when an electrical danger may remain. This course does not authorise touching endangered people or equipment.

Explore the service uncertainty

Fictional example: Fictional practice: A fictional team preparing a task finds that the service information does not match what is present.

Choose the awareness response without inventing a detection, testing or isolation method.

  • Does the task information reliably identify and control the relevant service hazard?
    • No or uncertain.: The uncertainty needs competent resolution before the affected task proceeds. Next: Hold affected activity and obtain competent help — Keep the area or task controlled through the actual procedure, report the uncertainty and obtain a revised authorised method. Do not improvise electrical testing, isolation or repair.
    • Yes, through the reviewed task-specific arrangement.: The person’s authority and competence still determine what they may do. Next: Is the proposed work within the person’s actual authorised competence?
  • Is the proposed work within the person’s actual authorised competence?
    • No.: Course awareness is not authority for specialist electrical work. Next: Hold affected activity and obtain competent help — Keep the area or task controlled through the actual procedure, report the uncertainty and obtain a revised authorised method. Do not improvise electrical testing, isolation or repair.
    • Yes.: Follow the real competent work-control arrangements; this exercise grants no permission. Next: Stay within the actual authorised role — Use the current controlled method, competent supervision and change-response route. A correct activity answer does not authorise work.
  • Hold affected activity and obtain competent help

    Keep the area or task controlled through the actual procedure, report the uncertainty and obtain a revised authorised method. Do not improvise electrical testing, isolation or repair.

  • Stay within the actual authorised role

    Use the current controlled method, competent supervision and change-response route. A correct activity answer does not authorise work.

Open the interactive lesson

Optional choices in the player are saved on this browser. They are separate from formal assessment results and records.

SHAREhub home