Apply the learning

Use these fictional practice sheets. They do not create, sign or approve workplace records.

Download the detailed PowerPointRead all source study notes

Abrasive wheels

Identify the task limits, responsibilities and support or escalation route. Compare the arrangement with the fictional case; do not adopt a template without checking the actual workplace.

  1. A disc fits a grinder but its marked maximum speed is below the tool’s rated speed. Is fitting enough evidence of suitability?
  2. No. Do not use it. Tool and wheel specifications must be compatible; fitting physically does not prove safe operation.
  3. Check one tool’s training, instructions and wheel-selection arrangements with a competent person.

Open live SHAREhub resource

The live SHAREhub tool may require an account. The included fictional exercise remains available offline and never creates a real workplace record.

Abrasive wheels and powered tools audit

Sample relevant questions, identify objective evidence and assign an owned corrective action. A completed form alone does not prove control.

  1. Is the tool and accessory suitable for the task, material and environment? Evidence to seek: Compare wet/dry use, speed, dimensions and attachment compatibility with manufacturer instructions.
  2. Are wheels and discs correctly selected, undamaged and within relevant use limits? Evidence to seek: Inspect identification and condition; check maximum operating speed against the spindle and prevent unsuitable or cracked accessories.
  3. Is access to dangerous moving parts prevented during operation and foreseeable interventions? Evidence to seek: Inspect fixed guards, reach paths, feed openings and exposed transmission; compare the safeguard strategy with the task assessment without entering danger zones.
  4. Are interlocks and protective devices effective and protected against routine defeat? Evidence to seek: Review competent functional-test records and bypass controls; do not defeat or test safeguards by placing a person in danger.

Open live SHAREhub resource

The live SHAREhub tool may require an account. The included fictional exercise remains available offline and never creates a real workplace record.

Engineering workshop shift readiness

Select the checks that would establish usable controls during this shift. State who must act if a check fails and what evidence is needed before release.

  1. Are machine guards fitted? Evidence to seek: Observe safely against the approved local criterion or check the named record. Yes confirms the whole question; No needs a finding and action; N/A needs a reason. Do not defeat safeguards, open live enclosures or perform an unsafe test.
  2. Are authorised stop checks complete? Evidence to seek: Observe safely against the approved local criterion or check the named record. Yes confirms the whole question; No needs a finding and action; N/A needs a reason. Do not defeat safeguards, open live enclosures or perform an unsafe test.

Open live SHAREhub resource

The live SHAREhub tool may require an account. The included fictional exercise remains available offline and never creates a real workplace record.

Cutting and grinding discs

Build a short fictional briefing: task, harm, controls, stop point and a question that checks understanding.

  1. A disc fits a grinder but its marked maximum speed is below the tool’s rated speed. Is fitting enough evidence of suitability?
  2. No. Do not use it. Tool and wheel specifications must be compatible; fitting physically does not prove safe operation.
  3. Check one tool’s training, instructions and wheel-selection arrangements with a competent person.

Open live SHAREhub resource

The live SHAREhub tool may require an account. The included fictional exercise remains available offline and never creates a real workplace record.

Optional visual practice and worked application

Use these fictional exercises to compare evidence and rehearse decisions. They do not alter course completion or assessment requirements. You can work through the same choices on paper.

Wheel, machine and task acceptance: read the evidence

A workshop team is replacing a redundant steel bracket. The proposed wheel fits the machine, but its label states a maximum speed below the speed marked on the grinder.

The failure in this example

The fitter treats physical fit as the acceptance test. That leaves a specification conflict which a guard or a careful operator cannot resolve.

A better arrangement

Hold the proposed combination. First consider whether another method avoids the abrasive-wheel task; otherwise obtain a suitable compatible wheel, machine and task arrangement through competent authorised checks.

Worked record: who owns the decision?

The workshop supervisor controls task release; the competent person responsible for selection and fitting verifies the component information.

Match the evidence roles in this task

A workshop team is replacing a redundant steel bracket. The proposed wheel fits the machine, but its label states a maximum speed below the speed marked on the grinder.

Place each statement under the evidence role it describes. These roles support one task decision; they are not interchangeable.

  • The grinder marking identifies the speed which the selected wheel must safely accommodate. Machine speed. This statement addresses machine speed. The grinder marking identifies the speed which the selected wheel must safely accommodate.
  • The wheel marking gives its own maximum permissible speed and intended application. Wheel specification. This statement addresses wheel specification. The wheel marking gives its own maximum permissible speed and intended application.
  • The proposed cut has a defined material, workholding, people and dust/spark-control arrangement. Task arrangement. This statement addresses task arrangement. The proposed cut has a defined material, workholding, people and dust/spark-control arrangement.

Open this interactive lesson

Wheel, machine and task acceptance: test the arrangement

The fitter treats physical fit as the acceptance test. That leaves a specification conflict which a guard or a careful operator cannot resolve. Hold the proposed combination. First consider whether another method avoids the abrasive-wheel task; otherwise obtain a suitable compatible wheel, machine and task arrangement through competent authorised checks.

Worked record: evidence to obtain

Machine identification and speed, the wheel identification and maximum permissible speed, application and dimensions, guard and mounting requirements, condition and the actual material/task controls.

Worked record: decision and owner

Hold the proposed combination. First consider whether another method avoids the abrasive-wheel task; otherwise obtain a suitable compatible wheel, machine and task arrangement through competent authorised checks. The workshop supervisor controls task release; the competent person responsible for selection and fitting verifies the component information.

Why the weak assurance fails

The fitter treats physical fit as the acceptance test. That leaves a specification conflict which a guard or a careful operator cannot resolve.

Choose evidence that supports the review

A workshop team is replacing a redundant steel bracket. The proposed wheel fits the machine, but its label states a maximum speed below the speed marked on the grinder. The team is reviewing what can support acceptance.

Select the two statements which support the example’s review. Leave the two unsupported shortcuts unselected.

  • An identified compatible wheel and the relevant machine/manufacturer information are checked together. Relevant evidence. This is useful evidence for this example. Machine identification and speed, the wheel identification and maximum permissible speed, application and dimensions, guard and mounting requirements, condition and the actual material/task controls.
  • The workholding, guard, surrounding people and generated hazards are checked for the actual cut. Relevant evidence. This is useful evidence for this example. Machine identification and speed, the wheel identification and maximum permissible speed, application and dimensions, guard and mounting requirements, condition and the actual material/task controls.
  • The wheel fits the spindle, so the lower speed marking can be disregarded. Insufficient evidence. This does not resolve the example’s acceptance gap. The fitter treats physical fit as the acceptance test. That leaves a specification conflict which a guard or a careful operator cannot resolve.
  • A general abrasive-wheel attendance certificate is used instead of verifying this combination. Insufficient evidence. This does not resolve the example’s acceptance gap. The fitter treats physical fit as the acceptance test. That leaves a specification conflict which a guard or a careful operator cannot resolve.

Open this interactive lesson

Wheel, machine and task acceptance: follow the changed condition

The replacement wheel has different markings, or the task changes from cutting to grinding. Follow the decision route; it supplies learning outcomes, not permission for real work.

A meaningful change

The replacement wheel has different markings, or the task changes from cutting to grinding. Revisit the basis of the affected decision instead of extending an earlier acceptance beyond its scope.

Worked record: what remains on hold?

The fitter treats physical fit as the acceptance test. That leaves a specification conflict which a guard or a careful operator cannot resolve. The example remains unresolved until the machine, wheel and task specifications are compatible and legible.

Worked record: what would support later acceptance?

Machine identification and speed, the wheel identification and maximum permissible speed, application and dimensions, guard and mounting requirements, condition and the actual material/task controls. The workshop supervisor controls task release; the competent person responsible for selection and fitting verifies the component information.

Follow the changed-condition decision

A workshop team is replacing a redundant steel bracket. The proposed wheel fits the machine, but its label states a maximum speed below the speed marked on the grinder. Changed condition: The replacement wheel has different markings, or the task changes from cutting to grinding.

Follow the evidence gates and compare the outcome of an unresolved condition with an established one.

  • Has the reviewer established that the machine, wheel and task specifications are compatible and legible?
    • Yes, the stated basis is established: That resolves this evidence question; check the separate readiness condition next. Next: Has the responsible owner established that the guard, workholding, surrounding people and exposure controls have been checked for this cut?
    • No, the basis remains unresolved: Do not infer acceptance from an incomplete or conflicting basis. The fitter treats physical fit as the acceptance test. That leaves a specification conflict which a guard or a careful operator cannot resolve. Next: Example outcome: retain the hold point — Hold the proposed combination. First consider whether another method avoids the abrasive-wheel task; otherwise obtain a suitable compatible wheel, machine and task arrangement through competent authorised checks.
  • Has the responsible owner established that the guard, workholding, surrounding people and exposure controls have been checked for this cut?
    • Yes, the required readiness evidence is established: In this fictional exercise, both evidence gates are established. Real work still follows its own authorised release. Next: Example outcome: record the verified basis for the authorised decision — Record the evidence, owner and limits of this example’s decision. The replacement wheel has different markings, or the task changes from cutting to grinding. is a reason to review it again; the course does not authorise actual work.
    • No, readiness or competent cover is still missing: An agreed principle is not a usable arrangement. Resolve the missing condition before affected work proceeds. Next: Example outcome: arrange the missing protection or support — The workshop supervisor controls task release; the competent person responsible for selection and fitting verifies the component information. Re-plan the affected work and obtain evidence that the required readiness condition is met.
  • Example outcome: retain the hold point

    Hold the proposed combination. First consider whether another method avoids the abrasive-wheel task; otherwise obtain a suitable compatible wheel, machine and task arrangement through competent authorised checks.

  • Example outcome: arrange the missing protection or support

    The workshop supervisor controls task release; the competent person responsible for selection and fitting verifies the component information. Re-plan the affected work and obtain evidence that the required readiness condition is met.

  • Example outcome: record the verified basis for the authorised decision

    Record the evidence, owner and limits of this example’s decision. The replacement wheel has different markings, or the task changes from cutting to grinding. is a reason to review it again; the course does not authorise actual work.

Open this interactive lesson

Abrasive-wheel assurance review

Select the abrasive-wheel or engineering assurance template. Use this bracket-cutting case to record the conflicting markings, the selection owner and the evidence required before task release.

Fictional record — task and concern: A workshop team is replacing a redundant steel bracket. The proposed wheel fits the machine, but its label states a maximum speed below the speed marked on the grinder.

Fictional record — decision: Hold the proposed combination. First consider whether another method avoids the abrasive-wheel task; otherwise obtain a suitable compatible wheel, machine and task arrangement through competent authorised checks.

Fictional record — owner: The workshop supervisor controls task release; the competent person responsible for selection and fitting verifies the component information.

Fictional record — verification and review: Machine identification and speed, the wheel identification and maximum permissible speed, application and dimensions, guard and mounting requirements, condition and the actual material/task controls. Review trigger: The replacement wheel has different markings, or the task changes from cutting to grinding.

Optional choices save on this browser, separately from recorded course progress. Live tools retain their own access and competent-review requirements.