This printable companion contains a blank workplace plan and a fictional worked example on separate print pages. It is a planning aid; use your organisation’s competent assessment and authorisation arrangements.

HAND–ARM VIBRATION · BLANK WORKPLACE PLAN
Before the task starts
Confirm a suitable method, credible personal exposure plan and clear stop/restart decisions. Do not enter confidential clinical details.
1. Choose and verify the method
ESEAP: Elimination → Substitution → Engineering → Administrative controls → PPE. Use ERICPD as a planning cross-check; Discipline supports every level.
| Stronger feasible control / what it changes | Owner and evidence that it works |
|---|---|
Check suitability, output, consumables, handling and other hazards. Dust/noise/fragment controls do not automatically reduce HAV dose. Gloves may support warmth; do not apply an unverified vibration reduction.
2. Review the person’s whole day
| Tool / task | Representative magnitude (m/s²) | Actual contact (min) | Points |
|---|---|---|---|
| TOTAL |
Points = magnitude² × minutes ÷ 30. Add all relevant HAV contributions; assess whole-body vibration separately. Action value: 100 points /2.5 m/s² A(8). Limit value: 400 points /5.0 m/s² A(8). Neither guarantees safety.
3. Check readiness and agree the hold conditions
Verification before release
Tool / accessory condition and compatibility:
Achievable limits, communication and restrictions:
Stop and restart
Stop if these conditions change or controls fail:
Evidence required / who accepts restart:
Report symptoms promptly; do not wait for an annual check. Implement occupational-health work advice through the appropriate route. Review unresolved restrictions at handover.
SHARElearn · Great Britain · Awareness planning aid. Primary guidance: hse.gov.uk/vibration/hav/ · Task controls: sharehub.ltd/knowledge-hub/hand-arm-vibration-syndrome.html

FICTIONAL WORKED EXAMPLE
Two operations, one daily contribution
These invented values teach the calculation. They are not generic ratings for a sander, breaker or any real tool, and are not a permission or safe-time allowance.
| Operation | Magnitude (m/s²) | Contact time | Calculation | Points |
|---|---|---|---|---|
| A | 4 | 60 min /1 hour | 4² ×60 ÷30 | 32 |
| B | 6 | 30 min /0.5 hour | 6² ×30 ÷30 | 36 |
| Combined | 68 |
68 points converts to 2.5 ×√(68 ÷100) ≈ 2.06 m/s² A(8).
What the result means
The fictional total is below the 100-point action value. It does not guarantee individual safety, remove practical prevention duties or dismiss a symptom report. Add any other relevant hand-transmitted operations for the person’s day.
Do not add vibration magnitudes or partial A(8) values. A lunch break or tool change does not reset accumulated daily exposure.
Make the plan useful
- Question the source. Can the hazardous manual step be removed or replaced by a suitable, verified lower-exposure process?
- Verify the inputs. Does the magnitude represent the actual tool, accessory, condition, material and method? Does contact time represent real work?
- Check the whole task. Consider workholding, dust, noise, fragments, handling and other people.
- Set hold conditions. Pause for abnormal vibration, defects, longer contact, changed material, failed controls or symptoms needing review.
- Support the person. Arrange appropriate reporting and health advice; implement work restrictions and follow up.
Useful primary references
- HSE calculator: hse.gov.uk/vibration/hav/calculator-guide.htm
- HSE control guidance: hse.gov.uk/vibration/hav/protect.htm
- HSE duties: hse.gov.uk/vibration/hav/responsibilities.htm
- Knowledge Hub task panels: sharehub.ltd/knowledge-hub/hand-arm-vibration-syndrome.html
Use the assessed SHARElms course for recorded learning and completion. This sheet is a workplace conversation aid and does not diagnose a condition or certify a task.