Build practical health and safety knowledge around everyday work. Choose a course, work through its explanations and scenarios, test your understanding, then keep your certificate in your learning account.
Short enough to fit into your day
Approximate learning time: 25–30 minutes per course, including core teaching, activities, lesson decisions and assessment. Save and resume when needed. Optional reading, practical tools and retries can take longer.
Free members may complete one included course per UK calendar month. Choose from the 15 courses below. Your next allowance begins on the first day of the next month; unused allowances do not accumulate. Earned certificates and saved progress remain in your account.
Each course has six focused lessons, three applied activities and a ten-question final assessment. The pass requires all learning and activities, at least 80% and every critical answer correct. Completion is awareness learning, with workplace-specific instruction and practical authorisation considered separately.
SH-SA-05
Free member training · Approx. 25–30 minutes
Connect hazardous substances, exposure and effective controls.
- Identify substances and exposure routes.
- Use a data sheet within a task assessment.
- Prioritise prevention and source control.
- Distinguish control checks and health surveillance.
6 lessons · 3 applied activities · 10-question assessment
SH-SA-18
Free member training · Approx. 25–30 minutes
Fit screen work to the person, the task and the locations actually used.
- Recognise the whole workstation and likely discomfort routes.
- Choose practical equipment and work-pattern improvements.
- Report concerns and verify that agreed changes work.
Includes office and home workstation assessment tools. Allow an additional 10–20 minutes per setup.
6 lessons · 3 applied activities · 10-question assessment
SH-SA-21
Free member training · Approx. 25–30 minutes
Recognise electrical harm routes, reject damaged equipment and respect the boundary of competent electrical work.
- Trace an electrical source to the person or material exposed.
- Distinguish user checks, maintenance and competent electrical work.
- Respond to defects and changed conditions without improvising a repair.
6 lessons · 3 applied activities · 10-question assessment
SH-SA-22
Free member training · Approx. 45–60 minutes with optional extinguisher practice
Prevent ignition and spread, recognise control failures and follow the premises emergency plan.
- Recognise ignition, fuel and spread routes.
- Prioritise prevention and effective building protection.
- Respond to an alarm or failed control within the local plan.
Allow approximately 45–60 minutes for the core course and optional extinguisher section: 25–30 minutes for core learning and assessment, plus 20–30 minutes for the extinguisher reference and games. The separate extra visual practice across the six lessons adds another 12–20 minutes if you use it all; further reading and retries may take longer.
Recognise ignition, fuel, smoke spread and failed controls, then follow the actual premises emergency plan. In the optional response-boundary section, compare six fire classes and 11 extinguisher types using Knowledge Hub images and tables, try two matching games and explore a four-stage response pathway. Recognition practice does not authorise firefighting or change the course assessment.
6 lessons · 3 applied activities · 10-question assessment
SH-SA-25
Free member training · Approx. 25–30 minutes
Know how to summon help and check that workplace first-aid arrangements match real work.
- Recognise the boundary between arrangements and trained first aid.
- Check hazards, shifts, location and access in a needs assessment.
- Summon appropriate help without exposing a responder to uncontrolled danger.
6 lessons · 3 applied activities · 10-question assessment
SH-SA-15
Free member training · Approx. 25–30 minutes
Recognise role responsibilities and connect them with actual controls.
- Connect duties with practical prevention.
- Recognise jurisdiction and source differences.
- Distinguish worker cooperation and employer responsibility.
- Use competent help and relevant assurance.
6 lessons · 3 applied activities · 10-question assessment
SH-SA-26
Free member training · Approx. 25–30 minutes
Decide whether the task can be done alone and test the whole help-and-response arrangement.
- Distinguish a suitable lone task from a higher-risk intervention.
- Check contact, location, escalation and achievable help.
- Stop or restrict work when the agreed assumptions fail.
6 lessons · 3 applied activities · 10-question assessment
SH-SA-09
Free member training · Approx. 25–30 minutes
Identify harmful work pressures and improve work design.
- Recognise work-related risk factors.
- Use the six work-design areas.
- Hold a bounded supportive conversation.
- Review organisational changes and their effect.
6 lessons · 3 applied activities · 10-question assessment
SH-SA-10
Free member training · Approx. 25–30 minutes
Reduce handling demands before relying on technique.
- Recognise handling beyond lifting.
- Assess interacting demand factors.
- Compare avoidance, redesign and aids.
- Review difficulty and verify changes.
6 lessons · 3 applied activities · 10-question assessment
SH-SA-33
Free member training · Approx. 25–30 minutes
Reduce noise at source and use representative exposure, fit and hearing-support evidence for different decisions.
- Distinguish sound level, daily exposure and peak concerns.
- Prioritise source reduction and suitable compatible protection.
- Respond to change, uncertainty and hearing concerns through competent routes.
6 lessons · 3 applied activities · 10-question assessment
SH-SA-20
Free member training · Approx. 25–30 minutes
Choose protection for the remaining hazard, then keep its fit, compatibility and condition effective.
- Place PPE after stronger hazard controls.
- Check suitability, fit and compatibility for the task and wearer.
- Recognise defects and verify protection in actual use.
6 lessons · 3 applied activities · 10-question assessment
SH-SA-01
Free member training · Approx. 25–30 minutes
Turn a task into a clear harm pathway, effective controls and checks.
- Describe a credible harm pathway.
- Compare stronger and weaker control functions.
- Record owned actions and verification.
- Recognise review and specialist-advice triggers.
6 lessons · 3 applied activities · 10-question assessment
SH-SA-19
Free member training · Approx. 25–30 minutes
Control the route, contamination and work pattern before relying on warnings or careful walking.
- Distinguish slip and trip mechanisms.
- Choose source, route and cleaning controls before warnings alone.
- Check hand-back and recurring defects against actual users.
6 lessons · 3 applied activities · 10-question assessment
SH-SA-27
Free member training · Approx. 25–30 minutes
Prevent unsafe contact through work design and give workers a reliable way to withdraw and summon help.
- Recognise task-based violence risks without stereotyping people.
- Choose service, layout and staffing controls before reliance on personal coping.
- Withdraw, summon help and report through appropriate safe routes.
6 lessons · 3 applied activities · 10-question assessment
SH-SA-39
Free member training · Approx. 25–30 minutes
Avoid the fall where possible, then protect the actual task and people below.
- Recognise a fall path including openings and fragile surfaces.
- Apply avoid, prevent and minimise in that order.
- Hold changed or unverified work until controls are restored.
6 lessons · 3 applied activities · 10-question assessment