Crownway Fuels

SHAREhub · Company management system · v1.0

← All Crownway resources

Permit to work and simultaneous operations procedure

CWF-PRO-PTW · Completed fictional example · Owner role: Engineering and asset integrity manager

Fictional arrangement or blank working master. No actual approval, site authorisation or completed evidence is supplied.

Permit to work and simultaneous operations procedure

Crownway Fuels Ltd. CWF-PRO-PTW. Version 1.0. Prepared 10 November 2026.

COMPLETED FICTIONAL ARRANGEMENT. This Crownway example supports adaptation and learning. It represents no actual company issue, site approval, signature or completed operational evidence.

Explain who does what, in what sequence, the control rationale, evidence, escalation and safe restart conditions.

Scope and responsibility

BULK; RETAIL. Apply where the site/activity/hazard is present; confirm in the site applicability assessment. Ten English petrol/diesel forecourts and convenience shops, HQ and mobile support. The additional bulk establishment is a separate illustrative scenario. Inventory, regulatory applicability, permissions and site-specific acceptance are unresolved.

Responsible roleRequired action
Engineering and asset integrity managerOwn the arrangement, its current scope and escalation.
Site manager and shift supervisorVerify worksite conditions, coordination, briefing and authorised limits.
Engineering and competent specialistsResolve technical uncertainties, verify protection and retain acceptance evidence.
Workers and contractor performing authorityCheck the agreed method, report change, stop loss of control and provide safe handback.

Information before release

Review current site and equipment information, assessments, permissions, competence, contractor interfaces and emergency readiness. The branch records identify the detailed evidence fields. Missing technical values are resolved from competent site information; do not copy values from teaching models.

Preparation and operation

1 Prepare the activity

Define the exact task, equipment boundary, hazards, isolation references, work party, other permits and validity. The issuer checks the worksite and confirms prerequisites with the performing authority.

2 Carry out and control the work

Coordinate hot work, line breaking, electrical work, entry and adjacent operations as one work picture. Brief the team and suspend when scope, personnel, protection or conditions change. A signature does not replace field verification.

Control rationale

A permit coordinates conflicting activities and confirms controls at the job; a signed form cannot make an unsafe task safe.

Stop escalation and return

Stop if scope, conditions, shifts or isolations change; if gas limits are exceeded, conflicting work starts or any permit condition is not met. Revalidate before restarting.

The person controlling the activity makes it safe and informs the site manager. The relevant competent specialist verifies the failed or uncertain safeguard. Operations authorises any restart separately after technical acceptance, applicable permissions, work coordination and a fresh briefing. Record all continuing restrictions.

Verification and follow through

At handback, account for people and equipment, inspect the work, resolve test and reinstatement requirements and close linked permits in the correct sequence. Operations retains separate authority for return to service.

Worked decision

A cleaning permit and a nearby ignition-producing task are individually documented but their boundaries overlap. The permit coordinator suspends the conflict, reviews simultaneous operations with both parties and issues fresh agreed conditions only after the conflict is resolved.

This invented case illustrates a decision and any continuing hold. It is not evidence that Crownway has completed an inspection, test, exposure evaluation or regulatory submission.

Connected documents

ReferenceUse in this branch
CWF-REG-PTW-01Active permits and simultaneous operations board (Register)
CWF-PTW-PTW-01General hazardous work permit (Permit)
CWF-RA-PTW-01Simultaneous operations and live trading assessment (Risk assessment)
CWF-CHK-PTW-01Permit issue suspension handover and closure check (Checklist)
CWF-AUD-PTW-01Permit to work quality and field compliance audit (Audit tool)

Retain stable record IDs, actual site or asset, template revision, competent author, date and time, findings, actions, owner, due date and evidence. Set the applicable record-specific retention and access rules before operational use. A review date does not authorise deletion; preserve legal holds.

Guidance and related arrangements

Primary guidance 1

Permit-to-work Systems

Crownway document overview

Primary guidance checked 10 November 2026 for the described arrangements. Linked legal-register entries keep their own review dates and territorial conditions. Guidance, ACOPs, company controls and direct statutory duties are distinct.

Primary references: hsg250

Related resources

Primary guidance