Crownway Fuels

SHAREhub · Company management system · v1.0

← All Crownway resources

Maintenance inspection and safety critical reliability procedure

CWF-PRO-MAINT · Completed fictional example · Owner role: Engineering and asset integrity manager

Fictional arrangement or blank working master. No actual approval, site authorisation or completed evidence is supplied.

Maintenance inspection and safety critical reliability procedure

Crownway Fuels Ltd. CWF-PRO-MAINT. Version 1.0. Prepared 10 November 2026.

COMPLETED FICTIONAL ARRANGEMENT. This Crownway example supports adaptation and learning. It represents no actual company issue, site approval, signature or completed operational evidence.

Explain who does what, in what sequence, the control rationale, evidence, escalation and safe restart conditions.

Scope and responsibility

BULK; HQ; RETAIL. Apply where the site/activity/hazard is present; confirm in the site applicability assessment. Ten English petrol/diesel forecourts and convenience shops, HQ and mobile support. The additional bulk establishment is a separate illustrative scenario. Inventory, regulatory applicability, permissions and site-specific acceptance are unresolved.

Responsible roleRequired action
Engineering and asset integrity managerOwn the arrangement, its current scope and escalation.
Site manager and shift supervisorVerify worksite conditions, coordination, briefing and authorised limits.
Engineering and competent specialistsResolve technical uncertainties, verify protection and retain acceptance evidence.
Workers and contractor performing authorityCheck the agreed method, report change, stop loss of control and provide safe handback.

Information before release

Review current site and equipment information, assessments, permissions, competence, contractor interfaces and emergency readiness. The branch records identify the detailed evidence fields. Missing technical values are resolved from competent site information; do not copy values from teaching models.

Preparation and operation

1 Prepare the activity

Engineering identifies assets and degradation modes, assigns criticality and defines competent inspection, maintenance, examination and proof-test requirements. Distinguish each activity and its evidence.

2 Carry out and control the work

Schedule work with isolation, permits, spares and competent contractors available. Track overdue safety-critical tasks and impairments with risk review and restrictions; do not silently roll the due date forward.

Control rationale

Deferred tests and poorly controlled repairs can silently remove safeguards while the site continues trading.

Stop escalation and return

Take affected equipment out of use for danger, failed safety function or examination prohibition; escalate critical backlog with explicit operating restriction and authority.

The person controlling the activity makes it safe and informs the site manager. The relevant competent specialist verifies the failed or uncertain safeguard. Operations authorises any restart separately after technical acceptance, applicable permissions, work coordination and a fresh briefing. Record all continuing restrictions.

Verification and follow through

Record as-found defects, work performed, test acceptance and as-left status. Confirm whether pressure-system or lifting-equipment duties are triggered by the actual equipment. A fuel tank is not automatically a qualifying pressure system.

Worked decision

A safety-critical inspection is overdue and no justification supports continued operation. Engineering escalates the impairment to operations and the board, establishes restrictions and obtains competent examination. Closing the work order without results is refused.

This invented case illustrates a decision and any continuing hold. It is not evidence that Crownway has completed an inspection, test, exposure evaluation or regulatory submission.

Connected documents

ReferenceUse in this branch
CWF-REG-MAINT-01Plant criticality maintenance and examination register (Register)
CWF-PLN-MAINT-01Safety critical maintenance and proof test schedule (Plan)
CWF-CHK-MAINT-01Preventive maintenance and functional test record (Checklist)
CWF-FRM-MAINT-01Safety critical impairment and overdue task decision (Form)
CWF-REG-MAINT-02Pressure system and lifting examination applicability register (Register)
CWF-CHK-MAINT-02Maintenance quality and contractor handback check (Checklist)

Retain stable record IDs, actual site or asset, template revision, competent author, date and time, findings, actions, owner, due date and evidence. Set the applicable record-specific retention and access rules before operational use. A review date does not authorise deletion; preserve legal holds.

Guidance and related arrangements

Primary guidance 1

Primary guidance 2

Health and Safety Management Systems

Crownway document overview

Primary guidance checked 10 November 2026 for the described arrangements. Linked legal-register entries keep their own review dates and territorial conditions. Guidance, ACOPs, company controls and direct statutory duties are distinct.

Primary references: maintenance | pressure systems

Related resources

Primary guidance