CWF-POL-SCOPE · Completed fictional example · Owner role: Health safety and environmental lead
Site inventory and regulatory applicability policy
Topical health and safety policy
Crownway Fuels Ltd
| Business name | Crownway Fuels Ltd | Employees | Approximately 200 |
| Industry | Petrol and diesel forecourts and convenience retail | Operating locations | Ten English petrol/diesel forecourts and convenience shops, HQ and mobile support. The additional bulk establishment is a separate illustrative scenario. Inventory, regulatory applicability, permissions and site-specific acceptance are unresolved. |
| Policy reference | CWF-POL-SCOPE | Status | In progress — confirm controlled issue |
| Owner | Health safety and environmental lead | Approval authority | Managing director and board |
| Issue version | 1.0 | Business area | Site inventory and regulatory applicability |
| Effective date | Not recorded | Next review | Not recorded |
| Jurisdiction | England baseline. GB duties and conditional national overlays retain their own scope. Northern Ireland is outside this example. | Audience | Health safety and environmental lead; Site manager and shift supervisor; Fuel operator and retail colleague; Engineering and asset integrity manager; Contractor performing authority |
Controlled document. Confirm the current issue and authorised approval before use.
Contents
Select a section to open it. ISO 45001 references show the clause alignment.
Business context
1 Policy statement ISO 5.1, 5.2, 5.4, 10.3
2 Purpose ISO 4.1, 6.1, 6.2
3 Scope ISO 4.3
4 Definitions and abbreviations ISO 7.4, 7.5
5 Legal regulatory and other requirements ISO 6.1.3
6 Roles responsibilities and accountabilities ISO 5.1, 5.3
7 Worker consultation and participation ISO 5.4
8 Hazard identification and risk assessment ISO 6.1.2, 6.1.4
9 Control measures and safe systems of work ISO 8.1, 8.1.2
10 Competence training and awareness ISO 7.2, 7.3
11 Communication requirements ISO 7.4
12 Operational requirements ISO 8.1
13 Emergency preparedness and response ISO 8.2
14 Incident reporting investigation and learning ISO 10.2
15 Monitoring measurement and performance evaluation ISO 9.1
16 Audit and assurance ISO 9.2
17 Management review ISO 9.3
18 Objectives targets and improvement plan ISO 6.2
19 Management of change ISO 8.1.3
20 Procurement contractors and suppliers ISO 8.1.4
21 Records and documented information ISO 7.5
22 Nonconformance and corrective action ISO 10.2
23 Continual improvement ISO 10.3
24 Policy review and approval ISO 5.2, 7.5
Appendix A ISO 45001 clause mapping
Appendix B Review and source record
Business context
Return to contents
Activities and scope: Site inventory and regulatory applicability at applicable sites
Significant risks and interfaces: Hazards and legal thresholds attach to actual substances, quantities, activities and establishment boundaries, not the company name.
Existing arrangements: Use the linked Crownway procedure and supporting records. This example contains no operational results or approved issue.
Other requirements: Determine actual permission, design, manufacturer and contract requirements before adoption.
Relevant learning: No actual Crownway incident history supplied. The worked decision in the linked procedure is invented.
Confirm competent review and organisational approval before issue. Tailor this policy to the actual business, activities, workers, locations and jurisdiction. Verify applicable legal duties, resources, control arrangements and evidence before issue. ISO 45001 clause references are an alignment guide; they do not establish certification or compliance. Unconfirmed arrangements must be resolved before the policy is used.
1 Policy statement
Return to contents
ISO 45001 alignment: 5.1, 5.2, 5.4, 10.3
We prevent work-related injury and ill health and protect people and the environment through proportionate control of site inventory and regulatory applicability. The board provides resources, supports consultation and protects the right to stop unsafe work. No new fuel, capacity increase, boundary change or activity starts with an unresolved tier, permit, certificate or material-change notification decision.
Implementation and effectiveness evidence
Board commitments and resourcing decisions; actual stop and escalation evidence.
SHARE guidance: uk legal framework
2 Purpose
Return to contents
ISO 45001 alignment: 4.1, 6.1, 6.2
This policy establishes company direction for site inventory and regulatory applicability. Hazards and legal thresholds attach to actual substances, quantities, activities and establishment boundaries, not the company name. The linked procedure translates these commitments into practical preparation, operating, verification and handback decisions.
Implementation and effectiveness evidence
Defined objective, task scope and links to practical arrangements.
SHARE guidance: uk legal framework
3 Scope
Return to contents
ISO 45001 alignment: 4.3
BULK; HQ; RETAIL. Apply where the site/activity/hazard is present; confirm in the site applicability assessment. Apply only to the established activities present at the actual location. Ten English petrol/diesel forecourts and convenience shops, HQ and mobile support. The additional bulk establishment is a separate illustrative scenario. Inventory, regulatory applicability, permissions and site-specific acceptance are unresolved. A bulk-scenario requirement is not a finding about an existing forecourt.
Implementation and effectiveness evidence
Site profile, operator, activity and applicability decision with unresolved limits.
SHARE guidance: uk legal framework
4 Definitions and abbreviations
Return to contents
ISO 45001 alignment: 7.4, 7.5
A critical control prevents or limits a serious harm scenario. An impairment is an unavailable or unreliable safeguard. Verification tests evidence against defined criteria. An action marked implemented still needs effectiveness review. Work release is the separate decision by an authorised person for a defined task.
Implementation and effectiveness evidence
Shared definitions and a briefing demonstrating understanding.
SHARE guidance: uk legal framework
5 Legal regulatory and other requirements
Return to contents
ISO 45001 alignment: 6.1.3
The HSE lead and relevant specialist check the actual dutyholder, jurisdiction, activity and trigger. Direct duties, permit or certificate requirements, ACOPs, guidance, standards and company rules are recorded distinctly. Illustrative company control supporting the duties and applicability conditions in the linked legal register. No register entry grants a permission.
Implementation and effectiveness evidence
Current legal and permissions register, dutyholder decision and dated primary sources.
SHARE guidance: uk legal framework
6 Roles responsibilities and accountabilities
Return to contents
ISO 45001 alignment: 5.1, 5.3
Health safety and environmental lead owns this policy and its evidence. Operations coordinates actual work and site interfaces. Engineering decides technical fitness within competence. The board resolves resources and major risk decisions. Workers report defects and stop unsafe work. Appointed specialists advise within their scope; legal dutyholders retain their duties.
Implementation and effectiveness evidence
Named appointments, competence, deputies and authority limits.
SHARE guidance: uk legal framework
7 Worker consultation and participation
Return to contents
ISO 45001 alignment: 5.4
Consult the people who perform and are affected by the work, including night staff, mobile staff, contractors and recognised representatives. Record concerns before the decision, explain the response and test understanding. Provide accessible ways to report uncertainty or challenge an unsafe arrangement without detriment.
Implementation and effectiveness evidence
Consultation record, workforce concerns and feedback to originators.
SHARE guidance: uk legal framework
8 Hazard identification and risk assessment
Return to contents
ISO 45001 alignment: 6.1.2, 6.1.4
Build a site-by-site inventory of the operator, activities, nation, maximum dangerous-substance holdings and wastes. Use classifications from current safety data and competent advice; sales throughput is not the COMAH inventory. Record uncertainties, credible consequences and people affected. Link the organisational risk to the relevant task and specialist assessments. A favourable rating cannot displace a duty or a failed critical control.
Implementation and effectiveness evidence
Assessment, worker input, assumptions and control selection rationale.
SHARE guidance: uk legal framework
9 Control measures and safe systems of work
Return to contents
ISO 45001 alignment: 8.1, 8.1.2
Create one approved applicability assessment per real site. Reconcile maximum inventories and CLP classifications against current COMAH Schedule 1, including named substances, categories and aggregation. Confirm establishment boundaries, permits, drainage and nearby receptors with competent specialists. The environmental, engineering and process-safety leads determine independent permission routes. Record petroleum certification, environmental permitting, planning and hazardous-substances consent separately, including changes and pre-start requirements.
Implementation and effectiveness evidence
Actual control implementation and task-specific evidence of protective function.
SHARE guidance: uk legal framework
10 Competence training and awareness
Return to contents
ISO 45001 alignment: 7.2, 7.3
Define the competence required for site inventory and regulatory applicability and check practical capability, experience, language and supervision. Keep an explicit authorised scope and reassess after change or failure. Awareness-course completion is evidence of learning only, not practical authority to carry out the task.
Implementation and effectiveness evidence
Task competence evaluation, supervision and restricted authorisation.
SHARE guidance: uk legal framework
11 Communication requirements
Return to contents
ISO 45001 alignment: 7.4
Brief current instructions, limits, precautions and stop conditions before the work. Use a two-way understanding check and hand over impairments between shifts and parties. The document controller withdraws superseded instructions while preserving the history and its evidence.
Implementation and effectiveness evidence
Current issue distribution, briefing, understanding and shift handover.
SHARE guidance: uk legal framework
12 Operational requirements
Return to contents
ISO 45001 alignment: 8.1
Build a site-by-site inventory of the operator, activities, nation, maximum dangerous-substance holdings and wastes. Use classifications from current safety data and competent advice; sales throughput is not the COMAH inventory. The environmental, engineering and process-safety leads determine independent permission routes. Record petroleum certification, environmental permitting, planning and hazardous-substances consent separately, including changes and pre-start requirements. Close the activity through the linked handback and verification controls; record the safe final state and unresolved restrictions.
Implementation and effectiveness evidence
Preparation, operating and handback records linked to the actual work.
SHARE guidance: uk legal framework
13 Emergency preparedness and response
Return to contents
ISO 45001 alignment: 8.2
Raise the alarm, protect people and summon emergency assistance promptly when required. Withdraw and prevent re-entry. Only trained and authorised people attempt isolation, containment or rescue within a safe method. Use the site-specific emergency plan and provide responders accurate substance and access information.
Implementation and effectiveness evidence
Site emergency arrangements, cover, exercises and unresolved readiness actions.
SHARE guidance: uk legal framework
14 Incident reporting investigation and learning
Return to contents
ISO 45001 alignment: 10.2
Report incidents, near misses, occupational-health concerns and barrier failures promptly. Preserve facts after making the area safe. The HSE lead checks applicable RIDDOR, COMAH and environmental reporting criteria and deadlines separately. Investigation examines evidence and organisational causes, not only individual actions.
Implementation and effectiveness evidence
Facts, reporting decision, genuine submission evidence where required and investigation.
SHARE guidance: uk legal framework
15 Monitoring measurement and performance evaluation
Return to contents
ISO 45001 alignment: 9.1
Reconcile the inventory against purchase limits, tank capacity, process holdings and credible temporary storage. Have a competent reviewer check Schedule 1 classification and aggregation before assigning any COMAH tier. Use evidence from actual work, not merely a signed form. Keep missing, failed and overdue safeguards visible and escalate promptly.
Implementation and effectiveness evidence
Defined indicators, source records, exceptions and field verification.
SHARE guidance: uk legal framework
16 Audit and assurance
Return to contents
ISO 45001 alignment: 9.2
A competent reviewer with appropriate independence samples the applicable duty, procedure, worksite and evidence. State the sample and limits, challenge inconsistent accounts and test repeat findings. A document audit or external certificate alone does not establish effective control across every site.
Implementation and effectiveness evidence
Audit criteria, sample, independence limits, findings and verification.
SHARE guidance: uk legal framework
17 Management review
Return to contents
ISO 45001 alignment: 9.3
The board reviews critical failures, exposure concerns, overdue actions, legal change, worker feedback, audit findings and resource constraints. Record decisions, owners, dates and restrictions. Serious control failures are escalated immediately rather than waiting for a planned meeting.
Implementation and effectiveness evidence
Management review decisions, resources, action ownership and follow-through.
SHARE guidance: uk legal framework
18 Objectives targets and improvement plan
Return to contents
ISO 45001 alignment: 6.2
The policy owner sets measurable improvements from the actual control gaps. Each objective has a baseline, accountable role, resources, milestones and an effectiveness test. Success means the intended control functions reliably in the defined scope; production or checklist totals alone are insufficient.
Implementation and effectiveness evidence
Baseline, milestones and defined effectiveness results.
SHARE guidance: uk legal framework
19 Management of change
Return to contents
ISO 45001 alignment: 8.1.3
Screen changes to equipment, product, layout, staffing, software, contractor arrangements and operating method before implementation. Obtain technical and regulatory review, update information, brief people and verify readiness. Temporary changes have an owner, expiry, restoration plan and review before extension.
Implementation and effectiveness evidence
Change assessment, permission review, readiness and temporary-change expiry.
SHARE guidance: uk legal framework
20 Procurement contractors and suppliers
Return to contents
ISO 45001 alignment: 8.1.4
Specify the competence, compatibility, safety function, information and lifecycle support required before purchase or appointment. Coordinate contractor hazards, permits, isolations and simultaneous work. Reject unauthorised substitutions and verify completed work and technical handback before operational return.
Implementation and effectiveness evidence
Supplier specification, capability checks, work coordination and handback.
SHARE guidance: uk legal framework
21 Records and documented information
Return to contents
ISO 45001 alignment: 7.5
Retain the permanent document and record references, current revision, actual scope, competent author, dates, findings, restrictions, actions and supporting evidence. Approved content, competent owner, briefing and field verification appropriate to the document. Apply an approved record-specific retention rule and legal holds. Restrict personal and clinical information to authorised access.
Implementation and effectiveness evidence
Controlled record, evidence reference, access and applicable retention decision.
SHARE guidance: uk legal framework
22 Nonconformance and corrective action
Return to contents
ISO 45001 alignment: 10.2
Make the affected area safe, record the failed requirement and apply interim restrictions. Assign an owner and due date without concealing delay by resetting it. Record implementation separately from competent verification. Reopen an action when the control is ineffective or assumptions change.
Implementation and effectiveness evidence
Containment, owner, due date, implementation and separate effectiveness evidence.
SHARE guidance: uk legal framework
23 Continual improvement
Return to contents
ISO 45001 alignment: 10.3
Review repeated failures and transferable learning across the ten forecourts, HQ and mobile work. Test whether the change improves the actual task and creates any new risk. Maintain specialist and bulk-scenario boundaries when sharing an improvement.
Implementation and effectiveness evidence
Cross-site learning, tested improvement and remaining limitations.
SHARE guidance: uk legal framework
24 Policy review and approval
Return to contents
ISO 45001 alignment: 5.2, 7.5
Prepared as a fictional Crownway example on 10 November 2026. Before first use and after change, incident, defective control or assurance finding; risk-based scheduled review. The owner resolves competent review comments and the board records any genuine controlled issue separately. Approval, signatures and effective dates are intentionally absent from this example. ISO references are alignment aids and do not establish certification.
Implementation and effectiveness evidence
Technical review, resolved comments, genuine approval and issue history when adopted.
SHARE guidance: uk legal framework
Appendix A ISO 45001 clause mapping
Return to contents
Clause references follow the supplied SHARE topical policy framework. This mapping is an alignment aid and does not reproduce the standard or establish certification.
| Policy section | ISO 45001 clauses |
| 1 Policy statement | 5.1, 5.2, 5.4, 10.3 |
| 2 Purpose | 4.1, 6.1, 6.2 |
| 3 Scope | 4.3 |
| 4 Definitions and abbreviations | 7.4, 7.5 |
| 5 Legal regulatory and other requirements | 6.1.3 |
| 6 Roles responsibilities and accountabilities | 5.1, 5.3 |
| 7 Worker consultation and participation | 5.4 |
| 8 Hazard identification and risk assessment | 6.1.2, 6.1.4 |
| 9 Control measures and safe systems of work | 8.1, 8.1.2 |
| 10 Competence training and awareness | 7.2, 7.3 |
| 11 Communication requirements | 7.4 |
| 12 Operational requirements | 8.1 |
| 13 Emergency preparedness and response | 8.2 |
| 14 Incident reporting investigation and learning | 10.2 |
| 15 Monitoring measurement and performance evaluation | 9.1 |
| 16 Audit and assurance | 9.2 |
| 17 Management review | 9.3 |
| 18 Objectives targets and improvement plan | 6.2 |
| 19 Management of change | 8.1.3 |
| 20 Procurement contractors and suppliers | 8.1.4 |
| 21 Records and documented information | 7.5 |
| 22 Nonconformance and corrective action | 10.2 |
| 23 Continual improvement | 10.3 |
| 24 Policy review and approval | 5.2, 7.5 |
Appendix B Review and source record
Return to contents
Source and review record
Original Crownway company example prepared 10 November 2026
Completed fictional policy. Approval and effective date remain blank. Current primary guidance was checked for the described scope; site-specific applicability and technical acceptance remain separate.
Reviewer confirmation: Pending
Questions to resolve:
Confirm the actual site and activity scope, named role holders and deputies.
Resolve applicable permissions, technical limits and evidence gaps before controlled issue.
Research source versions
UK Legal Framework
Supporting Knowledge Hub guidance
Updated: 2026-11-10 source checked
Knowledge Hub data SHA-256: b738c08cff8de8907bd068df5d92b6d26d70ac8e37023c6ccd172154dda563af
https://www.sharehub.ltd/knowledge-hub/uk-legal-framework.html
Framework: supplied SHARE HSE Topical Policy Template. Current standard and policy guidance:
ISO 45001 overview | HSE policy guidance
Primary references: comah15 | owner petrol station