CWF-PLN-DSEAR-01 · Completed fictional example · Owner role: Competent DSEAR and Ex specialist
Hazardous area classification drawings and basis
Crownway Fuels Ltd. CWF-PLN-DSEAR-01. Version 1.0. Prepared 10 November 2026.
COMPLETED FICTIONAL ARRANGEMENT. This Crownway example supports adaptation and learning. It represents no actual company issue, site approval, signature or completed operational evidence.
Provide the site/task-specific hazardous area classification drawings and basis and retain its controlled output.
Purpose scope and accountable roles
BULK; RETAIL. Apply where the site/activity/hazard is present; confirm in the site applicability assessment. Ten English petrol/diesel forecourts and convenience shops, HQ and mobile support. The additional bulk establishment is a separate illustrative scenario. Inventory, regulatory applicability, permissions and site-specific acceptance are unresolved.
Competent DSEAR and Ex specialist owns delivery of this plan. Operations secures staffing and resources; engineering, the HSE lead and relevant competent specialists confirm technical and legal prerequisites. The board resolves constraints affecting critical controls.
Planned arrangements
Identify dangerous substances, release points, quantities, temperatures, ventilation, people and abnormal conditions. Consider eliminating or reducing the substance and preventing releases before relying on ignition control.
A competent specialist evaluates explosive-atmosphere risks, hazardous areas, equipment suitability and interfaces. Establish any required explosion-safety verification before first use and after relevant change, with controlled drawings and technical records.
Required planning outputs
The Ex specialist retains a controlled assessment and drawing set covering each item below. Record the assessed basis, supporting evidence, accepted limits and unresolved actions. No zone distance or local engineering value is supplied by this example.
• Sources of release
• Grade
• Zone extent
• Assumptions
• Ventilation
• Pits/drains and interfaces
• Competent approval
Delivery verification and review
Walk the actual fill, vent, dispenser, drain and work areas against the assessment. Check equipment selection and inspection evidence for the actual zone and substance. Do not derive a hazardous-zone distance from a teaching picture.
| Stage | Example management arrangement |
| Before the activity | Owner confirms the scope, competent people, current information and permissions. Open critical prerequisites prevent release. |
| At implementation | Site supervisor verifies the physical arrangement and understanding. Engineering checks the accepted technical criteria for the affected equipment. |
| After change or failure | Suspend the affected scope, assess the changed risk, update information and brief people before a new decision. |
| Planned review | Owner reviews at a justified risk-based interval. Area management challenges evidence and independent assurance samples effectiveness. |
Stop escalation and return
Stop dispensing, transfer or affected maintenance for an uncontrolled release, failed ventilation, unverified zone/equipment suitability, uncontrolled ignition source or loss of essential protection.
The person controlling the activity makes it safe and informs the site manager. The relevant competent specialist verifies the failed or uncertain safeguard. Operations authorises any restart separately after technical acceptance, applicable permissions, work coordination and a fresh briefing. Record all continuing restrictions.
Worked decision
A contractor proposes a battery tool beside a fill connection without an assessed work boundary. The site manager suspends the task and obtains competent DSEAR advice, an appropriate method and verified controls before a new work-release decision.
This invented case illustrates a decision and any continuing hold. It is not evidence that Crownway has completed an inspection, test, exposure evaluation or regulatory submission.
Guidance and related arrangements
Primary guidance 1
Primary guidance 2
Risk Assessment of Flammable or Explosive Atmospheres
Crownway document overview
Primary guidance checked 10 November 2026 for the described arrangements. Linked legal-register entries keep their own review dates and territorial conditions. Guidance, ACOPs, company controls and direct statutory duties are distinct.
Primary references: dsear | official requirements