Care home safety / Moving and handling: hoists, slings and safe support
Care home safety · SH-CARE-05Moving and handling: hoists, slings and safe support

Free online training · Approximate learning time: 110–170 minutes · Self-paced
Make the person, plan, equipment and trained team work together before a transfer.
Full public teaching and readers are free without an account. A free learner account is required for saved LMS progress and recorded assessment. Completion and any course-completion certificate depend on the configured LMS conditions.
Who this course is for
Care staff, senior carers, moving-and-handling leads and equipment coordinators.
Make the person, plan, equipment and trained team work together before a transfer. Work through person-centred teaching, original cases and independent decisions before the model-linked practice. Preserve dignity, individual choice and the applicable lawful care process.
Care-home safety awareness with a Great Britain workplace baseline. CQC, DHSC and cited residential-care examples apply to England where stated; confirm the relevant national regime. This course does not confer clinical, medicines, lifting, restraint, maintenance or emergency-response competence or authorisation.
Learning outcomes
- Recognise size, attachment, condition and compatibility problems in a lifting arrangement.
- Distinguish pre-use checks, maintenance and thorough examination.
- Stop unsuitable transfers, maintain support and verify a current individual arrangement.
Course outline
Understand the person and activity
- Plan the transfer around the personApply plan the transfer around the person to the current person and task.
- Compatibility is more than a connector fittingApply compatibility is more than a connector fitting to the current person and task.
Choose suitable controls and support
- A pre-use check can stop a lift todayAct on current damage even when records are satisfactory.
- An examination report must match the actual equipmentDistinguish examination, maintenance and task readiness.
Verify information and role boundaries
- Attendance and support continue through a paused transferDo not leave a person suspended while solving another task.
- A safe transfer needs the complete current arrangementVerify changes rather than relying on one suitable component.
- Select the sling for this person and this transferTreat equipment identity as part of the care decision; availability pressure must not replace individual suitability.
- A connection that appears to fit may still be incompatibleControl interfaces between products as carefully as each product itself, especially when stock or suppliers change.
- Damaged stitching is a stop point for a lifting slingMake defect segregation work across care, laundry and stores so unsafe equipment cannot quietly re-enter circulation.
Practise the care-home decisions
- Link the lifting examination to the actual equipmentTrace safety evidence from the physical asset to the report, scope, findings and verified defect closure.
- A person in a hoist needs the planned continuous supportDesign care routines around predictable interruptions, so staff can finish safety-critical movements without competing tasks.
Defend the complete readiness plan
- The transfer interrupted by a shortageMake a complete readiness decision without compromising support.
- Take a verified action into the workplaceConnect one actual task to an owner, evidence and a clear release or escalation decision.
Activities, model practice and assessment
Work through 5 required applied activities and 3 model-practice pauses, with explanatory feedback and independent lesson decisions. Complete 5 distinct model mission sequences across those pauses. Use the actual fictional residential care home model or its equivalent accessible route to complete the required decision sequences; launching the model alone does not complete practice.
The 20-question assessment requires at least 80% plus every designated critical safety answer. Complete the required activities, practice and lesson checks. Points and badges cannot offset a critical safety error.
Use the LMS for confirmed save/resume and recorded results. Any certificate follows its configured passed-completion and grade conditions.
Open the public interactive practice copy; public practice is separate from the LMS record.
Sources and learning provenance
Original fictional cases are paired with public SHAREhub teaching and structured topic records. Use the applicable jurisdiction and primary guidance for live work.
Topic sections, source identities and versions
| Public topic | Chunk and version | Jurisdiction and sources |
|---|---|---|
| manual-handling · sector-examples | manual-handling--sector-examples 2.0 | Great Britain, Northern Ireland hse-manual, hseni-manual |
| load-handling-equipment-and-lifting-operations · inspection | load-handling-equipment-and-lifting-operations--inspection 2026-10-02-additive-1 | Great Britain, Northern Ireland load-handling-equipment-and-lifting-operations-src-02, load-handling-equipment-and-lifting-operations-src-01 |
| load-handling-equipment-and-lifting-operations · report-to-task-release | load-handling-equipment-and-lifting-operations--report-to-task-release 2026-10-02-additive-1 | Great Britain load-handling-equipment-and-lifting-operations-src-02, load-handling-equipment-and-lifting-operations-src-01, load-handling-equipment-and-lifting-operations-src-03 |
| hazard-identification-and-risk-assessment-foundations · hierarchy-applied | hazard-identification-and-risk-assessment-foundations--hierarchy-applied | Great Britain, Northern Ireland source-hse-risk, source-hseni-risk, share-hierarchy-hse |
| work-equipment-lifting-equipment-and-pressure-systems · first-actions | work-equipment-lifting-equipment-and-pressure-systems--first-actions 3.0 | Great Britain, Northern Ireland source-indg229, source-puwer_use, source-gb_puwer, source-ni_puwer, source-l22, source-introduction, source-gb_market, source-ni_market, source-sector_products |
| maintenance-inspection-and-testing-of-work-equipment-and-machinery · defects | maintenance-inspection-and-testing-of-work-equipment-and-machinery--defects 2.0 | Great Britain, Northern Ireland hse-maint, hse-loler-exam, m-review-pssr |
| work-equipment-lifting-equipment-and-pressure-systems · lifting-examination | work-equipment-lifting-equipment-and-pressure-systems--lifting-examination 3.0 | Great Britain, Northern Ireland source-loler_exam, source-l113, source-inspection, source-maintenance, source-gb_loler, source-ni_loler, source-faq, source-hseni_equipment, source-loler |
| manual-handling · decision-tool | manual-handling--decision-tool 2.0 | Great Britain, Northern Ireland hse-manual, hseni-manual |
| hazard-identification-and-risk-assessment-foundations · risk-process | hazard-identification-and-risk-assessment-foundations--risk-process | Great Britain, Northern Ireland source-hse-risk, source-hseni-risk |
Course SH-CARE-05 · version 2026.10.20.2. .
Questions about this course
Is this training free?
Full public teaching and readers are free without an account. A free learner account is required for saved LMS progress and recorded assessment. Completion and any course-completion certificate depend on the configured LMS conditions.
How long should I allow?
Approximately 110–170 minutes, including teaching, lesson checks, required activities, model or accessible practice and one assessment attempt. Individual pace, review and retries vary. Save and resume in the LMS.
Can I learn without a 3D-capable browser?
Yes. The complete HTML reader provides the teaching. Required model practice has an equivalent accessible decision route in the interactive course. Use the LMS route for recorded learning.
What is required to pass?
Complete the required learning, activities, practice and lesson decisions. The 20-question final assessment requires at least 80% plus every designated critical safety answer. Points cannot compensate for a critical safety error. Follow the feedback before retrying.
Does this authorise care operations?
Care-home safety awareness with a Great Britain workplace baseline. CQC, DHSC and cited residential-care examples apply to England where stated; confirm the relevant national regime. This course does not confer clinical, medicines, lifting, restraint, maintenance or emergency-response competence or authorisation. This independent course does not award an external qualification or replace competent task assessment, practical training or site authorisation.
Which manual handling assessments will you learn to use?
TILEO helps you review the wider task; MAC supports appropriate lifting, carrying and team handling of inanimate loads; RAPP supports appropriate pushing and pulling.
Moving a person needs an individual, person-centred assessment, care plan, suitable equipment and competent assistance. These object-handling MAC and RAPP calculators do not assess a resident's transfer or select a hoist, sling or staffing level. TILEO can organise general task questions but does not replace the individual's care assessment. Use the tools only for appropriate inanimate-load activities such as supplies or linen trolleys, alongside the course's care-specific arrangements.
This additional teaching takes about 2–5 minutes, in addition to the course estimate. Optional reading and workplace assessment take additional time.
Learn how to select the method, use separate reports for mixed tasks, add a company logo and keep editable Word or PDF records. After a saved pass, the course offers a direct route to the assessment tools. Workplace assessment and practical competence remain separate from course completion.