Yard traffic and loading-bay safety
Free online training · Approximate learning time: 210–320 minutes · Self-paced
Full public teaching and readers are free without an account. A free learner account is required for saved LMS progress and recorded assessment. Completion and any course-completion certificate depend on the configured LMS conditions. Open the course overview.
Lesson 1Trace the delivery from gate to departure
Separate pedestrians and vehicles through suitable layout and traffic arrangements.
Trace the delivery from gate to departure
The traffic arrangement must work for the visitor who has never seen the site. Follow the actual route from the gate, identify waiting and reporting points, and check that people can reach welfare without entering vehicle movements.
Manage arrival, positioning, transfer and departure as one sequence.
Follow the task through the area
A shortcut behind a reversing trailer
A visiting driver is manoeuvring while a picker considers cutting across the bay.
An open loading-bay edge
The trailer has left and the open bay is being used as a temporary staging point.
The trailer starts to move during loading
Loading has begun but the site and driver have not confirmed the departure control.
A shifted load inside the delivery
The load has shifted towards a trailer door; the team has not agreed a recovery plan.
An escalating dispute at the gate
A delivery dispute is escalating while one member of staff is alone at the gate.
A forklift defect is dismissed as minor
An operator reports a steering or braking concern before the next loading run.
Weather and visibility change the yard
Heavy rain, ice or poor light changes the conditions for a planned delivery movement.
The traffic plan no longer matches the yard
A delivery overflow has covered the protected walkway. The noticeboard still shows yesterday’s route, and a visiting driver is following it towards reception.
A forklift load blocks the driver’s view
A tall packaged load blocks the forklift operator’s forward view. An agency worker is about to cross the proposed route while dispatch asks for a quick move.
Challenge the first impression
Immediate protection and longer-term changes have different purposes. Explore each level and check what is feasible for the actual site, task and people.
Name who owns the work, verify implementation and check effectiveness in real conditions. A learning result or request for control does not close an operational action.
What is workplace transport and work-related driving?
It covers vehicle movement in workplaces and journeys people make by road for work.
HSE means the Health and Safety Executive for Great Britain; HSENI means the Health and Safety Executive for Northern Ireland. Use the legal and regulator route for the work location.
Site traffic includes people on foot as well as lift trucks, lorries, vans and mobile plant. Work-related road travel includes company vehicles and private vehicles used for business. Map where their paths meet, including deliveries, loading, reversing and temporary changes. Design out movements and separate routes before relying on signs, signals or a person standing close to a moving vehicle.
The strongest framework is safe site, safe vehicle and safe driver, with safe journey added for public-road driving. Transport incidents often involve interface risk: pedestrians in vehicle routes, reversing, blind spots, loading/unloading, visiting drivers, poor lighting, temporary routes, rushing, fatigue or communication failure.
A banksman or sign is not a substitute for good layout. The best control is to remove or physically separate the conflict before relying on people to see each other at the last moment.
Sources: HSE Workplace transport; HSENI Workplace transport
Applied case
Two deliveries arrive together in heavy rain. A visiting driver cannot find the waiting point, a trailer is being unloaded and a forklift has a reported defect.
Compare your decision
The traffic arrangement must work for the visitor who has never seen the site. Follow the actual route from the gate, identify waiting and reporting points, and check that people can reach welfare without entering vehicle movements.
The traffic arrangement must work for the visitor who has never seen the site. Follow the actual route from the gate, identify waiting and reporting points, and check that people can reach welfare without entering vehicle movements. Check the actual conditions and retain protection while gaps are resolved.
Lesson 2Control the interface at the loading bay
Recognise loading-edge, trailer-movement, load-stability and visibility hazards.
Control the interface at the loading bay
Loading creates interfaces between the vehicle, trailer, dock, handling equipment and people. Agree who controls the operation and how premature departure is prevented. A timetable does not replace a positive release arrangement.
Manage arrival, positioning, transfer and departure as one sequence.
Follow the task through the area
A shortcut behind a reversing trailer
A visiting driver is manoeuvring while a picker considers cutting across the bay.
An open loading-bay edge
The trailer has left and the open bay is being used as a temporary staging point.
The trailer starts to move during loading
Loading has begun but the site and driver have not confirmed the departure control.
A shifted load inside the delivery
The load has shifted towards a trailer door; the team has not agreed a recovery plan.
An escalating dispute at the gate
A delivery dispute is escalating while one member of staff is alone at the gate.
A forklift defect is dismissed as minor
An operator reports a steering or braking concern before the next loading run.
Weather and visibility change the yard
Heavy rain, ice or poor light changes the conditions for a planned delivery movement.
The traffic plan no longer matches the yard
A delivery overflow has covered the protected walkway. The noticeboard still shows yesterday’s route, and a visiting driver is following it towards reception.
A forklift load blocks the driver’s view
A tall packaged load blocks the forklift operator’s forward view. An agency worker is about to cross the proposed route while dispatch asks for a quick move.
Challenge the first impression
Immediate protection and longer-term changes have different purposes. Explore each level and check what is feasible for the actual site, task and people.
Name who owns the work, verify implementation and check effectiveness in real conditions. A learning result or request for control does not close an operational action.
What counts as work at height?
It is work in any place where a person could fall a distance liable to cause personal injury if precautions were absent; there is no universal two-metre trigger.
Best-practice guide · six simple steps
Best-practice guide: Working at Height
Start with the key actions, then explore value, a workplace example, harm, stronger controls and further help. Choose a step or use Previous and Next; the guide does not advance automatically.
Step 1 of 6 · StartThis cardPNG imagePDFView full sizeAll 6 cardsPNG images (ZIP)PDF (6 pages)Keep one card or the full set for social sharing, team briefings and learning. Each PDF contains one card per page. Read the full topic for explanations, questions and source links.
Read all six steps as text
1. Avoid height, then prevent the remaining fall
Use the actual task, structure and conditions to choose the method.
- Avoid: Complete the task from ground level where reasonably practicable.
- Prevent: Use a suitable safe place or collective fall prevention where work at height remains.
- Minimise: Plan the distance, consequences and rescue for a remaining fall risk.
Keep the work-at-height sequence: avoid the work where reasonably practicable, prevent falls, then minimise the distance and consequences of a remaining fall. Choose collective protection before personal protection at each level. A short task or a fall below two metres can still cause severe injury.
Apply it: Can the task be completed without approaching a fragile surface, opening or unprotected edge?
Read this part of the full topicOpen the full topicWork at Height Regulations 2005 (Great Britain law)Work at Height Regulations (Northern Ireland) 2005 (Northern Ireland law)HSE introduction to working at height safely (Great Britain regulator guidance)2. Turn working at height knowledge into a decision
Use the evidence to improve the actual work arrangement.
- Change at source: Lower a lighting mast for servicing or inspect from a suitable ground-level method so the worker does not need to reach an edge or fragile surface.
- Make it observable: Facilities or design owner verifies access, reach, electrical interfaces and the completed task.
- Keep useful evidence: Survey, method choice, equipment checks, exclusion check, handback and defect record.
Work at height is any work where a person could fall far enough to be injured if precautions were absent; there is no universal two-metre threshold. A fall through a fragile rooflight, from an edge or into an opening can be fatal even during a short task. Survey, method choice, equipment checks, exclusion check, handback and defect record.
Apply it: What evidence would show that the change improves this task, rather than only completing a record?
Read this part of the full topicOpen the full topicHSE Managing risk using PPE (Great Britain)HSE step-by-step guide (Great Britain regulator guidance)HSE mobile elevating work platforms (Great Britain construction guidance)3. Inspect ageing rooflights without stepping on the roof
Fictional example: a practical application of the existing topic lesson.
- Setting: Inspect ageing rooflights without stepping on a suspect roof.
- Act: Review fragility and whether an internal or MEWP method can reach the task; exclude people below.
- Hold / review: Hold if roof strength, route or protection is uncertain or wind exceeds the equipment limit.
Use the selected protected method; maintain edge and opening protection and monitor weather. Leave barriers until access is closed; record defects and owner for repair.
Apply it: At which point would you hold this example, and what evidence would allow it to proceed?
Read this part of the full topicOpen the full topicHSE GEIS5 fragile roofs (Great Britain regulator guidance)HSE roof work (Great Britain construction guidance)Work at Height Regulations 2005 (Great Britain law)4. How does the work lead to harm? decision table
Connect the task, the route to the person and the control that can fail.
- Fragile rooflight or sheet: The surface gives way and a person falls through into the space below.
- Edge, opening or ladder: A slip or overreach leads to a fall onto a hard or obstructed landing.
- Dropped tool or material: A person below is struck even though the worker above remains protected.
Fragile rooflight or sheet: The surface gives way and a person falls through into the space below. Edge, opening or ladder: A slip or overreach leads to a fall onto a hard or obstructed landing. Dropped tool or material: A person below is struck even though the worker above remains protected.
Apply it: Who could be exposed, including other trades, cleaners, maintainers and people nearby?
Read this part of the full topicOpen the full topicHSE introduction to working at height safely (Great Britain regulator guidance)HSE roof work (Great Britain construction guidance)HSENI working at height (Northern Ireland regulator information)5. Use the work-at-height control sequence
Start with the stronger practicable options and verify their effect.
- Avoid height: Use a suitable ground-level inspection or servicing method.
- Prevent collectively: Provide a suitable guarded platform, edge protection or other collective system.
- Prevent personally: Use designed restraint only where appropriate to the assessed task.
- Minimise a fall: Use suitable collective measures before a justified personal fall-arrest system.
- Verify and rescue: Check equipment, anchors, clearance, weather limits and timely rescue.
The legal sequence remains avoid, prevent, minimise. Collective protection takes priority over personal protection. Restraint prevents reaching a fall position; fall arrest allows a fall and requires suitable clearance and a planned rescue. Neither establishes that an uncertain roof is sound.
Apply it: What proves the selected equipment protects this task and permits the planned rescue?
Read this part of the full topicOpen the full topicHSE Managing risk using PPE (Great Britain)HSE step-by-step guide (Great Britain regulator guidance)HSE mobile elevating work platforms (Great Britain construction guidance)6. Use the full working at height lesson
Follow the official sources below and retain the task-specific evidence.
- Official guidance: Work at Height Regulations 2005
- Official guidance: Work at Height Regulations (Northern Ireland) 2005
- Task decision: Survey, method choice, equipment checks, exclusion check, handback and defect record.
Apply it: Which official source and full-topic section will you use to resolve the next decision?
Read this part of the full topicOpen the full topicWork at Height Regulations 2005 (Great Britain law)Work at Height Regulations (Northern Ireland) 2005 (Northern Ireland law)HSE introduction to working at height safely (Great Britain regulator guidance)
Simplified learning guide. Use the full topic, current official guidance and the actual work arrangements. Workplace scenarios labelled fictional are illustrative examples.
HSE means the Health and Safety Executive for Great Britain; HSENI means the Health and Safety Executive for Northern Ireland. Use the legal and regulator route for the work location.
This can include work above ground, near an opening, or at ground level beside a fragile surface over a void. Assess the actual fall path, not just floor height. Ordinary stairs that form a permanent workplace are not automatically a work-at-height task.
Sources: Work at Height Regulations 2005; Work at Height Regulations (Northern Ireland) 2005; HSE introduction to working at height safely
Applied case
Two deliveries arrive together in heavy rain. A visiting driver cannot find the waiting point, a trailer is being unloaded and a forklift has a reported defect.
Compare your decision
Loading creates interfaces between the vehicle, trailer, dock, handling equipment and people. Agree who controls the operation and how premature departure is prevented. A timetable does not replace a positive release arrangement.
Loading creates interfaces between the vehicle, trailer, dock, handling equipment and people. Agree who controls the operation and how premature departure is prevented. A timetable does not replace a positive release arrangement. Check the actual conditions and retain protection while gaps are resolved.
Lesson 3A shortcut behind a reversing trailer
Keep people out of the manoeuvring area and contact the yard controller from the protected route.
Read the scene evidence
A visiting driver is manoeuvring while a picker considers cutting across the bay.
Identify the condition separately from the exposed person and any possible outcome.
How the harm pathway develops
A vehicle movement crossing an unprotected pedestrian route
A visiting driver is manoeuvring while a picker considers cutting across the bay.
How people can be exposed
A person enters the vehicle manoeuvring envelope.
Possible harm
Impact or crushing between a moving vehicle and a fixed object.
Compare the work arrangements
Download comparison table (PDF · A4 landscape)
Select controls by how they prevent harm
Immediate protection and longer-term changes have different purposes. Explore each level and check what is feasible for the actual site, task and people.
Use the five-level hierarchy below. Inspection, instruction and supervision sustain every chosen control; they do not replace physical prevention.
Verify, communicate and hand back
Name who owns the work, verify implementation and check effectiveness in real conditions. A learning result or request for control does not close an operational action.
Explain the task-specific evidence, who must act and what restriction remains until it is resolved. A closed action or a course badge cannot establish a live site condition.
What is workplace transport and work-related driving?
It covers vehicle movement in workplaces and journeys people make by road for work.
HSE means the Health and Safety Executive for Great Britain; HSENI means the Health and Safety Executive for Northern Ireland. Use the legal and regulator route for the work location.
Site traffic includes people on foot as well as lift trucks, lorries, vans and mobile plant. Work-related road travel includes company vehicles and private vehicles used for business. Map where their paths meet, including deliveries, loading, reversing and temporary changes. Design out movements and separate routes before relying on signs, signals or a person standing close to a moving vehicle.
The strongest framework is safe site, safe vehicle and safe driver, with safe journey added for public-road driving. Transport incidents often involve interface risk: pedestrians in vehicle routes, reversing, blind spots, loading/unloading, visiting drivers, poor lighting, temporary routes, rushing, fatigue or communication failure.
A banksman or sign is not a substitute for good layout. The best control is to remove or physically separate the conflict before relying on people to see each other at the last moment.
Sources: HSE Workplace transport; HSENI Workplace transport
How can the ISO 45001 hierarchy of controls prevent vehicle collisions during workplace transport and work journeys?
Remove the hazard where reasonably practicable. If it remains, consider a safer method, engineering controls and safe work arrangements before personal protective equipment for residual risk.
HSE places elimination, substitution, engineering, administrative controls and personal protective equipment in that order. Verify that the chosen controls work on the actual task.
ERICPD (Eliminate, Reduce including substitution, Isolate, Control, personal protective equipment (PPE), Discipline) is a SHARE decision prompt cross-mapped to HSE’s five-level hierarchy. Apply it to the vehicle movement, loading task and road journey separately. A sign, banksman or high-visibility garment cannot compensate for a layout that repeatedly puts people in the vehicle path.
How can the ERICPD hierarchy of controls prevent vehicle collisions during workplace transport and work journeys?
ERICPD is a planning crossmap. Its prompts do not add a sixth rung or rank Isolate above engineering. Discipline verifies and sustains every control level.
How can the ISO 45001 hierarchy of controls prevent vehicle collisions during workplace transport and work journeys?
The hierarchy of controls in ISO 45001:2018 comes under Clause 8.1.2 (Eliminating hazards and reducing OH&S risks), which is located within Clause 8 ("Operation").
ESEAP: Elimination, Substitution, Engineering controls, Administrative controls and PPE. Control order: HSE hierarchy of controls and IOSH hierarchy of control guidance.
Sources: HSE hierarchy of control
Control-map basis: HSE hierarchy of control; HSE Workplace transport checklist, reversing; HSE Driving and riding safely for work; HSE Workplace transport; HSE Safe workplace; HSE Safe drivers
Applied case
A visiting driver is manoeuvring while a picker considers cutting across the bay. At handover, someone says that assigning an action owner is enough to restart. Decide what is still needed.
Compare your decision
Name who owns the work, verify implementation and check effectiveness in real conditions. A learning result or request for control does not close an operational action.
Name who owns the work, verify implementation and check effectiveness in real conditions. A learning result or request for control does not close an operational action. Ownership and training support the control but do not demonstrate its effectiveness.
Lesson 4An open loading-bay edge
Keep people and loads away from the edge and have the bay secured by the authorised team.
Read the scene evidence
The trailer has left and the open bay is being used as a temporary staging point.
Identify the condition separately from the exposed person and any possible outcome.
How the harm pathway develops
An unprotected change in level at the loading dock
The trailer has left and the open bay is being used as a temporary staging point.
How people can be exposed
A worker or trolley reaches the exposed edge.
Possible harm
A fall from the dock or a load falling onto people below.
Compare the work arrangements
Download comparison table (PDF · A4 landscape)
Select controls by how they prevent harm
Immediate protection and longer-term changes have different purposes. Explore each level and check what is feasible for the actual site, task and people.
Use the five-level hierarchy below. Inspection, instruction and supervision sustain every chosen control; they do not replace physical prevention.
Verify, communicate and hand back
Name who owns the work, verify implementation and check effectiveness in real conditions. A learning result or request for control does not close an operational action.
Explain the task-specific evidence, who must act and what restriction remains until it is resolved. A closed action or a course badge cannot establish a live site condition.
What counts as work at height?
It is work in any place where a person could fall a distance liable to cause personal injury if precautions were absent; there is no universal two-metre trigger.
Best-practice guide · six simple steps
Best-practice guide: Working at Height
Start with the key actions, then explore value, a workplace example, harm, stronger controls and further help. Choose a step or use Previous and Next; the guide does not advance automatically.
Step 1 of 6 · StartThis cardPNG imagePDFView full sizeAll 6 cardsPNG images (ZIP)PDF (6 pages)Keep one card or the full set for social sharing, team briefings and learning. Each PDF contains one card per page. Read the full topic for explanations, questions and source links.
Read all six steps as text
1. Avoid height, then prevent the remaining fall
Use the actual task, structure and conditions to choose the method.
- Avoid: Complete the task from ground level where reasonably practicable.
- Prevent: Use a suitable safe place or collective fall prevention where work at height remains.
- Minimise: Plan the distance, consequences and rescue for a remaining fall risk.
Keep the work-at-height sequence: avoid the work where reasonably practicable, prevent falls, then minimise the distance and consequences of a remaining fall. Choose collective protection before personal protection at each level. A short task or a fall below two metres can still cause severe injury.
Apply it: Can the task be completed without approaching a fragile surface, opening or unprotected edge?
Read this part of the full topicOpen the full topicWork at Height Regulations 2005 (Great Britain law)Work at Height Regulations (Northern Ireland) 2005 (Northern Ireland law)HSE introduction to working at height safely (Great Britain regulator guidance)2. Turn working at height knowledge into a decision
Use the evidence to improve the actual work arrangement.
- Change at source: Lower a lighting mast for servicing or inspect from a suitable ground-level method so the worker does not need to reach an edge or fragile surface.
- Make it observable: Facilities or design owner verifies access, reach, electrical interfaces and the completed task.
- Keep useful evidence: Survey, method choice, equipment checks, exclusion check, handback and defect record.
Work at height is any work where a person could fall far enough to be injured if precautions were absent; there is no universal two-metre threshold. A fall through a fragile rooflight, from an edge or into an opening can be fatal even during a short task. Survey, method choice, equipment checks, exclusion check, handback and defect record.
Apply it: What evidence would show that the change improves this task, rather than only completing a record?
Read this part of the full topicOpen the full topicHSE Managing risk using PPE (Great Britain)HSE step-by-step guide (Great Britain regulator guidance)HSE mobile elevating work platforms (Great Britain construction guidance)3. Inspect ageing rooflights without stepping on the roof
Fictional example: a practical application of the existing topic lesson.
- Setting: Inspect ageing rooflights without stepping on a suspect roof.
- Act: Review fragility and whether an internal or MEWP method can reach the task; exclude people below.
- Hold / review: Hold if roof strength, route or protection is uncertain or wind exceeds the equipment limit.
Use the selected protected method; maintain edge and opening protection and monitor weather. Leave barriers until access is closed; record defects and owner for repair.
Apply it: At which point would you hold this example, and what evidence would allow it to proceed?
Read this part of the full topicOpen the full topicHSE GEIS5 fragile roofs (Great Britain regulator guidance)HSE roof work (Great Britain construction guidance)Work at Height Regulations 2005 (Great Britain law)4. How does the work lead to harm? decision table
Connect the task, the route to the person and the control that can fail.
- Fragile rooflight or sheet: The surface gives way and a person falls through into the space below.
- Edge, opening or ladder: A slip or overreach leads to a fall onto a hard or obstructed landing.
- Dropped tool or material: A person below is struck even though the worker above remains protected.
Fragile rooflight or sheet: The surface gives way and a person falls through into the space below. Edge, opening or ladder: A slip or overreach leads to a fall onto a hard or obstructed landing. Dropped tool or material: A person below is struck even though the worker above remains protected.
Apply it: Who could be exposed, including other trades, cleaners, maintainers and people nearby?
Read this part of the full topicOpen the full topicHSE introduction to working at height safely (Great Britain regulator guidance)HSE roof work (Great Britain construction guidance)HSENI working at height (Northern Ireland regulator information)5. Use the work-at-height control sequence
Start with the stronger practicable options and verify their effect.
- Avoid height: Use a suitable ground-level inspection or servicing method.
- Prevent collectively: Provide a suitable guarded platform, edge protection or other collective system.
- Prevent personally: Use designed restraint only where appropriate to the assessed task.
- Minimise a fall: Use suitable collective measures before a justified personal fall-arrest system.
- Verify and rescue: Check equipment, anchors, clearance, weather limits and timely rescue.
The legal sequence remains avoid, prevent, minimise. Collective protection takes priority over personal protection. Restraint prevents reaching a fall position; fall arrest allows a fall and requires suitable clearance and a planned rescue. Neither establishes that an uncertain roof is sound.
Apply it: What proves the selected equipment protects this task and permits the planned rescue?
Read this part of the full topicOpen the full topicHSE Managing risk using PPE (Great Britain)HSE step-by-step guide (Great Britain regulator guidance)HSE mobile elevating work platforms (Great Britain construction guidance)6. Use the full working at height lesson
Follow the official sources below and retain the task-specific evidence.
- Official guidance: Work at Height Regulations 2005
- Official guidance: Work at Height Regulations (Northern Ireland) 2005
- Task decision: Survey, method choice, equipment checks, exclusion check, handback and defect record.
Apply it: Which official source and full-topic section will you use to resolve the next decision?
Read this part of the full topicOpen the full topicWork at Height Regulations 2005 (Great Britain law)Work at Height Regulations (Northern Ireland) 2005 (Northern Ireland law)HSE introduction to working at height safely (Great Britain regulator guidance)
Simplified learning guide. Use the full topic, current official guidance and the actual work arrangements. Workplace scenarios labelled fictional are illustrative examples.
HSE means the Health and Safety Executive for Great Britain; HSENI means the Health and Safety Executive for Northern Ireland. Use the legal and regulator route for the work location.
This can include work above ground, near an opening, or at ground level beside a fragile surface over a void. Assess the actual fall path, not just floor height. Ordinary stairs that form a permanent workplace are not automatically a work-at-height task.
Sources: Work at Height Regulations 2005; Work at Height Regulations (Northern Ireland) 2005; HSE introduction to working at height safely
How can the hierarchy of controls avoid work at height and reduce remaining fall risks?
Avoid work at height where reasonably practicable; otherwise prevent a fall, then minimise its distance and consequences.
Choose equipment for the actual task and conditions, plan rescue and check that collective measures and the work plan remain effective.
ERICPD (Eliminate, Reduce including substitution, Isolate, Control, personal protective equipment (PPE), Discipline) helps organise the control decision alongside HSE’s five-level hierarchy. For work at height, keep the legal sequence of avoiding the work, preventing a fall and then minimising distance and consequences. Collective protection takes priority over personal protection. A lower-level measure needs a recorded task-based reason when a stronger option cannot be used.
How can the ERICPD hierarchy of controls avoid work at height and reduce remaining fall risks?
ERICPD is a planning crossmap. Its prompts do not add a sixth rung or rank Isolate above engineering. Discipline verifies and sustains every control level.
How can the ISO 45001 hierarchy of controls avoid work at height and reduce remaining fall risks?
The hierarchy of controls in ISO 45001:2018 comes under Clause 8.1.2 (Eliminating hazards and reducing OH&S risks), which is located within Clause 8 ("Operation").
ESEAP: Elimination, Substitution, Engineering controls, Administrative controls and PPE. Control order: HSE hierarchy of controls and IOSH hierarchy of control guidance.
Sources: HSE Work at height
Control-map basis: HSE Managing risk using PPE; HSE step-by-step guide; HSE mobile elevating work platforms; HSE roof work; HSE assessing all work at height; Work at Height Regulations 2005; Work at Height Regulations (Northern Ireland) 2005; HSE introduction to working at height safely
Applied case
The trailer has left and the open bay is being used as a temporary staging point. At handover, someone says that assigning an action owner is enough to restart. Decide what is still needed.
Compare your decision
Name who owns the work, verify implementation and check effectiveness in real conditions. A learning result or request for control does not close an operational action.
Name who owns the work, verify implementation and check effectiveness in real conditions. A learning result or request for control does not close an operational action. Ownership and training support the control but do not demonstrate its effectiveness.
Lesson 5The trailer starts to move during loading
Stop loading, keep clear of the interface and ask the responsible controller to secure and verify the loading arrangement.
Read the scene evidence
Loading has begun but the site and driver have not confirmed the departure control.
Identify the condition separately from the exposed person and any possible outcome.
How the harm pathway develops
Uncontrolled movement of a vehicle at an occupied loading interface
Loading has begun but the site and driver have not confirmed the departure control.
How people can be exposed
A person or handling vehicle crosses the moving dock-to-trailer interface.
Possible harm
A fall, trapping or overturning at the gap.
Compare the work arrangements
Download comparison table (PDF · A4 landscape)
Select controls by how they prevent harm
Immediate protection and longer-term changes have different purposes. Explore each level and check what is feasible for the actual site, task and people.
Use the five-level hierarchy below. Inspection, instruction and supervision sustain every chosen control; they do not replace physical prevention.
Verify, communicate and hand back
Name who owns the work, verify implementation and check effectiveness in real conditions. A learning result or request for control does not close an operational action.
Explain the task-specific evidence, who must act and what restriction remains until it is resolved. A closed action or a course badge cannot establish a live site condition.
What is workplace transport and work-related driving?
It covers vehicle movement in workplaces and journeys people make by road for work.
HSE means the Health and Safety Executive for Great Britain; HSENI means the Health and Safety Executive for Northern Ireland. Use the legal and regulator route for the work location.
Site traffic includes people on foot as well as lift trucks, lorries, vans and mobile plant. Work-related road travel includes company vehicles and private vehicles used for business. Map where their paths meet, including deliveries, loading, reversing and temporary changes. Design out movements and separate routes before relying on signs, signals or a person standing close to a moving vehicle.
The strongest framework is safe site, safe vehicle and safe driver, with safe journey added for public-road driving. Transport incidents often involve interface risk: pedestrians in vehicle routes, reversing, blind spots, loading/unloading, visiting drivers, poor lighting, temporary routes, rushing, fatigue or communication failure.
A banksman or sign is not a substitute for good layout. The best control is to remove or physically separate the conflict before relying on people to see each other at the last moment.
Sources: HSE Workplace transport; HSENI Workplace transport
How can the ISO 45001 hierarchy of controls prevent vehicle collisions during workplace transport and work journeys?
Remove the hazard where reasonably practicable. If it remains, consider a safer method, engineering controls and safe work arrangements before personal protective equipment for residual risk.
HSE places elimination, substitution, engineering, administrative controls and personal protective equipment in that order. Verify that the chosen controls work on the actual task.
ERICPD (Eliminate, Reduce including substitution, Isolate, Control, personal protective equipment (PPE), Discipline) is a SHARE decision prompt cross-mapped to HSE’s five-level hierarchy. Apply it to the vehicle movement, loading task and road journey separately. A sign, banksman or high-visibility garment cannot compensate for a layout that repeatedly puts people in the vehicle path.
How can the ERICPD hierarchy of controls prevent vehicle collisions during workplace transport and work journeys?
ERICPD is a planning crossmap. Its prompts do not add a sixth rung or rank Isolate above engineering. Discipline verifies and sustains every control level.
How can the ISO 45001 hierarchy of controls prevent vehicle collisions during workplace transport and work journeys?
The hierarchy of controls in ISO 45001:2018 comes under Clause 8.1.2 (Eliminating hazards and reducing OH&S risks), which is located within Clause 8 ("Operation").
ESEAP: Elimination, Substitution, Engineering controls, Administrative controls and PPE. Control order: HSE hierarchy of controls and IOSH hierarchy of control guidance.
Sources: HSE hierarchy of control
Control-map basis: HSE hierarchy of control; HSE Workplace transport checklist, reversing; HSE Driving and riding safely for work; HSE Workplace transport; HSE Safe workplace; HSE Safe drivers
Applied case
Loading has begun but the site and driver have not confirmed the departure control. At handover, someone says that assigning an action owner is enough to restart. Decide what is still needed.
Compare your decision
Name who owns the work, verify implementation and check effectiveness in real conditions. A learning result or request for control does not close an operational action.
Name who owns the work, verify implementation and check effectiveness in real conditions. A learning result or request for control does not close an operational action. Ownership and training support the control but do not demonstrate its effectiveness.
Lesson 6A shifted load inside the delivery
Keep people outside the possible movement area and arrange a competent assessment before opening or unloading.
Read the scene evidence
The load has shifted towards a trailer door; the team has not agreed a recovery plan.
Identify the condition separately from the exposed person and any possible outcome.
How the harm pathway develops
An unstable load with uncertain weight and restraint
The load has shifted towards a trailer door; the team has not agreed a recovery plan.
How people can be exposed
Opening the door or handling the load releases stored movement.
Possible harm
Falling stock, crushing or overturning of handling equipment.
Compare the work arrangements
Download comparison table (PDF · A4 landscape)
Select controls by how they prevent harm
Immediate protection and longer-term changes have different purposes. Explore each level and check what is feasible for the actual site, task and people.
Use the five-level hierarchy below. Inspection, instruction and supervision sustain every chosen control; they do not replace physical prevention.
Verify, communicate and hand back
Name who owns the work, verify implementation and check effectiveness in real conditions. A learning result or request for control does not close an operational action.
Explain the task-specific evidence, who must act and what restriction remains until it is resolved. A closed action or a course badge cannot establish a live site condition.
What does load-handling equipment and lifting operations mean?
It means moving loads using suitable aids or lifting equipment under a planned, supervised and competent system.
Best-practice guide · six simple steps
Best-practice guide: Load-Handling Equipment and Lifting Operations
Start with the key actions, then explore value, a workplace example, harm, stronger controls and further help. Choose a step or use Previous and Next; the guide does not advance automatically.
Step 1 of 6 · StartThis cardPNG imagePDFView full sizeAll 6 cardsPNG images (ZIP)PDF (6 pages)Keep one card or the full set for social sharing, team briefings and learning. Each PDF contains one card per page. Read the full topic for explanations, questions and source links.
Read all six steps as text
1. What does load-handling equipment and lifting operations mean?
It means moving loads using suitable aids or lifting equipment under a planned, supervised and competent system.
- Avoid / redesign: Avoid moving the motor by redesigning work at its current position where feasible.
- Control the task: Use rated lifting gear, secure attachments and a segregated travel route.
- Verify before release: Planner records feasibility; unclear task holds lift.
It means moving loads using suitable aids or lifting equipment under a planned, supervised and competent system. Choose a safer way to move the load before designing a lift.
Apply it: Which part of this plan would you check at the workface before authorising the task?
Read this part of the full topicOpen the full topicLOLER overview (Great Britain)Safe use of lifting equipment (L113) (Great Britain)2. Turn load-handling equipment and lifting operations knowledge into a decision
Use the evidence to improve the actual work arrangement.
- Change at source: Avoid moving the motor by redesigning work at its current position where feasible.
- Make it observable: Planner records feasibility; unclear task holds lift.
- Keep useful evidence: Shrink-wrapped pallet, weight confirmed, no leaning, no damaged pallet.
Choose a safer way to move the load before designing a lift. Where lifting equipment is needed, a competent person plans the operation, selects equipment and accessories for the load and environment, keeps people away from a suspended load and verifies pre-use checks, maintenance and statutory examination. Shrink-wrapped pallet, weight confirmed, no leaning, no damaged pallet.
Apply it: What evidence would show that the change improves this task, rather than only completing a record?
Read this part of the full topicOpen the full topicLOLER overview (Great Britain)3. Worked lifting assessment example
Fictional example: a practical application of the existing topic lesson.
- Load: What is being lifted and where is the centre of gravity?
- Equipment: Is the lift truck and attachment suitable?
- Route: Can the load travel safely?
Load: What is being lifted and where is the centre of gravity? Evidence / response: Shrink-wrapped pallet, weight confirmed, no leaning, no damaged pallet. Equipment: Is the lift truck and attachment suitable? Evidence / response: Correct rated capacity, fork length suitable, daily check complete.
Apply it: At which point would you hold this example, and what evidence would allow it to proceed?
Read this part of the full topicOpen the full topicLOLER overview (Great Britain)4. Follow the load and the people in its path
Connect the task, the route to the person and the control that can fail.
- Load failure: An unsuitable attachment or insecure load can fall or shift.
- Movement: A swinging load or moving lifting equipment can trap or strike people.
- Stability: Ground, capacity or setup failures can overturn equipment or destabilise the lift.
An unsuitable attachment or insecure load can fall or shift. A swinging load or moving lifting equipment can trap or strike people. Ground, capacity or setup failures can overturn equipment or destabilise the lift. Use the full topic for the detailed mechanism, task limits and source scope.
Apply it: Where is this harm route present in the actual work, and which control breaks it before anyone is exposed?
Read this part of the full topicOpen the full topicLOLER overview (Great Britain)Safe use of lifting equipment (L113) (Great Britain)5. Choose controls for load-handling equipment and lifting operations
Start with the stronger practicable options and verify their effect.
- Eliminate: Avoid moving the motor by redesigning work at its current position where feasible.
- Reduce: Use a lighter modular component or a lower-risk delivery/move method.
- Isolate: Use rated lifting gear, secure attachments and a segregated travel route.
- Control: Approved lift plan, signaler, exclusion, weather/ground checks and communication.
- PPE: Head, foot, hand protection for residual contact hazard.
Eliminate: Avoid moving the motor by redesigning work at its current position where feasible. Reduce: Use a lighter modular component or a lower-risk delivery/move method. Isolate: Use rated lifting gear, secure attachments and a segregated travel route. Control: Approved lift plan, signaler, exclusion, weather/ground checks and communication. PPE: Head, foot, hand protection for residual contact hazard. Read the full control table for qualifications, ownership and verification. Use the actual task and applicable jurisdiction; existing technical approval remains unchanged.
Apply it: Which stronger option can be used here, and who will verify it before accepting the remaining risk?
Read this part of the full topicOpen the full topicLOLER overview (Great Britain)6. Use the full load-handling equipment and lifting operations lesson
Follow the official sources below and retain the task-specific evidence.
- Official guidance: LOLER overview
- Official guidance: Safe use of lifting equipment (L113)
- Task decision: Shrink-wrapped pallet, weight confirmed, no leaning, no damaged pallet.
Apply it: Which official source and full-topic section will you use to resolve the next decision?
Read this part of the full topicOpen the full topicLOLER overview (Great Britain)Safe use of lifting equipment (L113) (Great Britain)
Simplified learning guide. Use the full topic, current official guidance and the actual work arrangements. Workplace scenarios labelled fictional are illustrative examples.
This topic sits between manual handling, work equipment, workplace transport and lifting operations. A sack truck, trolley or pallet truck may reduce manual handling effort, but it can introduce new risks such as runaway loads, poor steering, trapping, slopes, unsuitable wheels or overloading. A crane, hoist, lift truck or lifting accessory can remove manual effort but creates higher-energy hazards such as suspended loads, overturning, dropped loads, crushing, striking structures or instability.
The first professional judgement is whether the load needs to be handled at all. Can the task be eliminated, delivered closer to the point of use, split into smaller units, palletised, mechanised, redesigned or completed at a better height? If handling remains, the task, individual, load and environment still matter. If lifting equipment is used, the organisation must also consider suitability, strength, stability, marking, pre-use checks, maintenance, inspection, thorough examination, competent planning and supervision.
For learners, the key is not to memorise equipment names. The useful mental model is: what is the load, how will it move, what could fail, who could be struck, trapped, fall or strain, what prevents the event, and what evidence proves the control is live today?
Lifting Operations and Lifting Equipment Regulations (LOLER) scope depends on what the equipment actually does. HSE’s LOLER overview says simple pallet trucks that raise a load only just clear of the ground, and many conveyors, are outside LOLER but remain subject to the Provision and Use of Work Equipment Regulations (PUWER). HSE L113 identifies high-lift pallet trucks able to raise forks above 300 mm as LOLER examples. Do not assign the LOLER six-/12-month examination cycle to every load-handling aid; first check whether it is lifting equipment within scope.
Download comparison table (PDF · A4 landscape)
How can the hierarchy of controls prevent dropped loads and unsafe lifting operations?
Remove the need for hazardous handling where feasible, then select equipment and controls for the residual lift.
Eliminate, Reduce, Isolate, Control, Personal protective equipment (PPE) and Discipline (ERICPD) below maps to the five-level hierarchy for a motor lifted from a workshop bay. HSE lifting overview sets the planning and equipment principles. The supervisor holds the move if load identity, attachment, travel clearance or equipment condition is uncertain.
The five levels are elimination, substitution, engineering, administrative controls and PPE. “Discipline” is the sustained inspection, feedback and repair that keeps each selected level effective.
How can the ERICPD hierarchy of controls prevent dropped loads and unsafe lifting operations?
ERICPD is a planning crossmap. Its prompts do not add a sixth rung or rank Isolate above engineering. Discipline verifies and sustains every control level.
Worked activity: Task application for Load-Handling Equipment and Lifting Operations
- Activity and release context
- Eliminate, Reduce, Isolate, Control, Personal protective equipment (PPE) and Discipline (ERICPD) below maps to the five-level hierarchy for a motor lifted from a workshop bay. HSE lifting overview sets the planning and equipment principles. The supervisor holds the move if load identity, attachment, travel clearance or equipment condition is uncertain.
- Full example
- Read the activity, checks and hand-back in context
How can the ISO 45001 hierarchy of controls prevent dropped loads and unsafe lifting operations?
The hierarchy of controls in ISO 45001:2018 comes under Clause 8.1.2 (Eliminating hazards and reducing OH&S risks), which is located within Clause 8 ("Operation").
ESEAP: Elimination, Substitution, Engineering controls, Administrative controls and PPE. Control order: HSE hierarchy of controls and IOSH hierarchy of control guidance.
Worked activity: Task application for Load-Handling Equipment and Lifting Operations
- Activity and release context
- Eliminate, Reduce, Isolate, Control, Personal protective equipment (PPE) and Discipline (ERICPD) below maps to the five-level hierarchy for a motor lifted from a workshop bay. HSE lifting overview sets the planning and equipment principles. The supervisor holds the move if load identity, attachment, travel clearance or equipment condition is uncertain.
- Full example
- Read the activity, checks and hand-back in context
Applied case
The load has shifted towards a trailer door; the team has not agreed a recovery plan. At handover, someone says that assigning an action owner is enough to restart. Decide what is still needed.
Compare your decision
Name who owns the work, verify implementation and check effectiveness in real conditions. A learning result or request for control does not close an operational action.
Name who owns the work, verify implementation and check effectiveness in real conditions. A learning result or request for control does not close an operational action. Ownership and training support the control but do not demonstrate its effectiveness.
Lesson 7An escalating dispute at the gate
Maintain distance and a safe exit, withdraw from immediate danger and use the site support or emergency arrangements.
Read the scene evidence
A delivery dispute is escalating while one member of staff is alone at the gate.
Identify the condition separately from the exposed person and any possible outcome.
How the harm pathway develops
Threatening behaviour at an isolated delivery interface
A delivery dispute is escalating while one member of staff is alone at the gate.
How people can be exposed
A worker has no safe separation or reliable access to help.
Possible harm
Threats or assault, and psychological harm.
Compare the work arrangements
Download comparison table (PDF · A4 landscape)
Select controls by how they prevent harm
Immediate protection and longer-term changes have different purposes. Explore each level and check what is feasible for the actual site, task and people.
Use the five-level hierarchy below. Inspection, instruction and supervision sustain every chosen control; they do not replace physical prevention.
Verify, communicate and hand back
Name who owns the work, verify implementation and check effectiveness in real conditions. A learning result or request for control does not close an operational action.
Explain the task-specific evidence, who must act and what restriction remains until it is resolved. A closed action or a course badge cannot establish a live site condition.
What counts as violence at work?
HSE defines it broadly as work-related incidents where a person is abused, threatened or assaulted; this includes face-to-face, telephone and online conduct, not only physical injury.
Best-practice guide · six simple steps
Best-practice guide: Violence at Work
Start with the key actions, then explore value, a workplace example, harm, stronger controls and further help. Choose a step or use Previous and Next; the guide does not advance automatically.
Step 1 of 6 · StartThis cardPNG imagePDFView full sizeAll 6 cardsPNG images (ZIP)PDF (6 pages)Keep one card or the full set for social sharing, team briefings and learning. Each PDF contains one card per page. Read the full topic for explanations, questions and source links.
Read all six steps as text
1. What counts as violence at work?
HSE defines it broadly as work-related incidents where a person is abused, threatened or assaulted; this includes face-to-face, telephone and online conduct, not only physical injury.
- Avoid / redesign: Remote option, cashless process, different location or no lone visit.
- Control the task: Queue, appointment, two-person task, escalation and security.
- Verify before release: Check access and equality effects.
HSE defines it broadly as work-related incidents where a person is abused, threatened or assaulted; this includes face-to-face, telephone and online conduct, not only physical injury. Violence at work covers work-related abuse, threats and assaults, including incidents that cause psychological harm without a visible injury.
Apply it: Which part of this plan would you check at the workface before authorising the task?
Read this part of the full topicOpen the full topicHSE Violence and aggression at work overview (Great Britain guidance)GOV.UK workplace bullying and harassment (Great Britain)NI discrimination at work (Northern Ireland)2. Turn violence at work knowledge into a decision
Use the evidence to improve the actual work arrangement.
- Change at source: Remote option, cashless process, different location or no lone visit.
- Make it observable: Check access and equality effects.
- Keep useful evidence: Queue/service data, roster, alarm test, incident account, CCTV hold, police reference if any and action verification.
Violence at work covers work-related abuse, threats and assaults, including incidents that cause psychological harm without a visible injury. Risk grows when a worker must refuse a service, handle valuables, work alone or cannot withdraw safely. Queue/service data, roster, alarm test, incident account, CCTV hold, police reference if any and action verification.
Apply it: What evidence would show that the change improves this task, rather than only completing a record?
Read this part of the full topicOpen the full topicHSE Control measures to prevent violence and aggression (Great Britain guidance)HSE Examples of ways to prevent violence (Great Britain guidance)HSE HSG48 Reducing error and influencing behaviour (Great Britain guidance)3. Riverside evening reception response
Fictional example: a practical application of the existing topic lesson.
- Setting: Resolve bookings and entry at an evening leisure-centre reception with a growing queue.
- Act: Confirm peak cover, waiting information, access control, safe staff route and emergency roles.
- Hold / review: Pause service, withdraw to staff space and call 999 if violence is happening or danger is immediate.
A customer shouts and makes a credible threat after a booking failure; worker keeps distance and ends contact. Account for people, offer support, preserve footage and verify changes before normal service.
Apply it: At which point would you hold this example, and what evidence would allow it to proceed?
Read this part of the full topicOpen the full topicHSE Control measures to prevent violence and aggression (Great Britain guidance)HSE Examples of ways to prevent violence (Great Britain guidance)HSE Reporting and learning from violent incidents (Great Britain guidance)4. Who and what circumstances can face higher risk?
Connect the task, the route to the person and the control that can fail.
- Source / exposure: Risk rises through the interaction of the task, people, place, time, service conditions and available support; job title or a label such as vulnerable worker is not a substitute for that assessment.
- Possible consequence: Relevant circumstances include public contact, refusing or enforcing a decision, handling medicines, money or valuables, delivering bad news, delays, queues, intoxication, distress, lone or late work, home visits, isolated travel and access to personal information.
- Control failure: New starters, trainees, agency workers, people working alone and workers whose communication, disability or experience affects escape or help may need different controls.
Risk rises through the interaction of the task, people, place, time, service conditions and available support; job title or a label such as vulnerable worker is not a substitute for that assessment.
Apply it: Who could be exposed, including other trades, cleaners, maintainers and people nearby?
Read this part of the full topicOpen the full topicHSE Violence at work: assessing the risks (Great Britain guidance)HSE Examples of ways to prevent violence (Great Britain guidance)HSE Lone working overview (Great Britain guidance)5. Choose controls for violence at work
Start with the stronger practicable options and verify their effect.
- Eliminate or redesign: Remote option, cashless process, different location or no lone visit.
- Environment and collective protection: Visibility, separation, exits, secure staff space and lighting.
- Organisation and staffing: Queue, appointment, two-person task, escalation and security.
- Personal skills and devices: Communication, de-escalation, radio and alarm.
Eliminate or redesign: Remote option, cashless process, different location or no lone visit. Environment and collective protection: Visibility, separation, exits, secure staff space and lighting. Organisation and staffing: Queue, appointment, two-person task, escalation and security. Personal skills and devices: Communication, de-escalation, radio and alarm. Read the full control table for qualifications, ownership and verification. Use the actual task and applicable jurisdiction; existing technical approval remains unchanged.
Apply it: Which stronger option can be used here, and who will verify it before accepting the remaining risk?
Read this part of the full topicOpen the full topicHSE Control measures to prevent violence and aggression (Great Britain guidance)HSE Examples of ways to prevent violence (Great Britain guidance)HSE HSG48 Reducing error and influencing behaviour (Great Britain guidance)6. Use the full violence at work lesson
Follow the official sources below and retain the task-specific evidence.
- Official guidance: HSE Violence and aggression at work overview
- Official guidance: GOV.UK workplace bullying and harassment
- Task decision: Queue/service data, roster, alarm test, incident account, CCTV hold, police reference if any and action verification.
Apply it: Which official source and full-topic section will you use to resolve the next decision?
Read this part of the full topicOpen the full topicHSE Violence and aggression at work overview (Great Britain guidance)GOV.UK workplace bullying and harassment (Great Britain)NI discrimination at work (Northern Ireland)
Simplified learning guide. Use the full topic, current official guidance and the actual work arrangements. Workplace scenarios labelled fictional are illustrative examples.
Threats, intimidation, sexual or discriminatory abuse, stalking, attempted assault, spitting, biting, robbery and weapon incidents can require prevention and response even when nobody is injured. Personal disputes, domestic abuse, bullying or harassment may fall outside HSE's work-related-violence definition or primary remit, but an employer may still need immediate safety, police, safeguarding, HR, equality and support action. This page does not classify a crime or decide civil or employment liability.
Basis: HSE Violence and aggression at work overview; GOV.UK workplace bullying and harassment; NI discrimination at work; GOV.UK Contact the police
What is the prevention hierarchy?
First remove or redesign conflict-prone work; then use collective workplace and service controls, adequate staffing, communication and tested emergency arrangements. Personal skills and devices support those controls; resistance or absorbing aggression is never a control tier.
Avoid unnecessary face-to-face refusal, cash or isolated contact where a safer channel works. Reduce foreseeable frustration through clear information and service design. Separate workers from reach or weapons where proportionate, provide exits and visible support, and resource the response. Training, scripts and alarms support the system but cannot repair an unsafe layout, impossible workload, lone deployment or slow response. Physical intervention is specialist and risk-specific; this page does not authorise it. See HSE Control measures to prevent violence and aggression.
Applied case
A delivery dispute is escalating while one member of staff is alone at the gate. At handover, someone says that assigning an action owner is enough to restart. Decide what is still needed.
Compare your decision
Name who owns the work, verify implementation and check effectiveness in real conditions. A learning result or request for control does not close an operational action.
Name who owns the work, verify implementation and check effectiveness in real conditions. A learning result or request for control does not close an operational action. Ownership and training support the control but do not demonstrate its effectiveness.
Lesson 8A forklift defect is dismissed as minor
Stop the affected use, keep the equipment from being taken by another operator and arrange competent defect assessment.
Read the scene evidence
An operator reports a steering or braking concern before the next loading run.
Identify the condition separately from the exposed person and any possible outcome.
How the harm pathway develops
A safety-related defect on mobile handling equipment
An operator reports a steering or braking concern before the next loading run.
How people can be exposed
The equipment is used before its safe condition is established.
Possible harm
Loss of control, collision or crushing.
Compare the work arrangements
Download comparison table (PDF · A4 landscape)
Select controls by how they prevent harm
Immediate protection and longer-term changes have different purposes. Explore each level and check what is feasible for the actual site, task and people.
Use the five-level hierarchy below. Inspection, instruction and supervision sustain every chosen control; they do not replace physical prevention.
Verify, communicate and hand back
Name who owns the work, verify implementation and check effectiveness in real conditions. A learning result or request for control does not close an operational action.
Explain the task-specific evidence, who must act and what restriction remains until it is resolved. A closed action or a course badge cannot establish a live site condition.
How do maintenance, inspection and testing differ?
Maintenance keeps equipment in safe condition; inspection finds dangerous condition or deterioration; testing challenges a specified function. Statutory thorough examination or written-scheme examination applies only to equipment within the relevant specialist regime.
Best-practice guide · six simple steps
Best-practice guide: Maintenance, inspection and testing of work equipment and machinery
Start with the key actions, then explore value, a workplace example, harm, stronger controls and further help. Choose a step or use Previous and Next; the guide does not advance automatically.
Step 1 of 6 · StartThis cardPNG imagePDFView full sizeAll 6 cardsPNG images (ZIP)PDF (6 pages)Keep one card or the full set for social sharing, team briefings and learning. Each PDF contains one card per page. Read the full topic for explanations, questions and source links.
Read all six steps as text
1. How do maintenance, inspection and testing differ?
Maintenance keeps equipment in safe condition; inspection finds dangerous condition or deterioration; testing challenges a specified function.
- Avoid / redesign: At purchase or modification, the engineer moves lubrication, adjustment or condition-monitoring points outside the danger zone where practicable, so routine checks do not require guard removal or access beside moving parts.
- Control the task: For the repair, authorised staff identify and isolate the conveyor and connected feeds, prevent reconnection, control stored energy and support parts that could move or fall using the machine-specific method.
- Verify before release: Verify the revised arrangement against all use and maintenance tasks.
Maintenance keeps equipment in safe condition; inspection finds dangerous condition or deterioration; testing challenges a specified function. Statutory thorough examination or written-scheme examination applies only to equipment within the relevant specialist regime. Maintenance keeps equipment in safe condition, inspection finds defects or deterioration, and testing checks a specified function.
Apply it: Which part of this plan would you check at the workface before authorising the task?
Read this part of the full topicOpen the full topicHSE inspection of work equipment (Great Britain)HSE maintenance of work equipment (Great Britain)HSE LOLER overview (Great Britain)2. Turn maintenance, inspection and testing of work equipment and machinery knowledge into a decision
Use the evidence to improve the actual work arrangement.
- Change at source: At purchase or modification, the engineer moves lubrication, adjustment or condition-monitoring points outside the danger zone where practicable, so routine checks do not require guard removal or access beside moving parts.
- Make it observable: Verify the revised arrangement against all use and maintenance tasks.
- Keep useful evidence: Keep defect and hold record, isolation method, repair, functional test, affected inspection decision, contractor handback and recurring-failure review.
Maintenance keeps equipment in safe condition, inspection finds defects or deterioration, and testing checks a specified function. Choose each check for the actual equipment and hazard; statutory examination is a separate requirement only where the relevant law applies. Keep defect and hold record, isolation method, repair, functional test, affected inspection decision, contractor handback and recurring-failure review.
Apply it: What evidence would show that the change improves this task, rather than only completing a record?
Read this part of the full topicOpen the full topicHSE managing risk using PPE (Great Britain; apply separate Northern Ireland law where relevant, Great Britain)HSE maintenance of work equipment (Great Britain)HSE inspection of work equipment (Great Britain)3. the site team service and failed interlock
Fictional example: a practical application of the existing topic lesson.
- Setting: the site team’s warehouse conveyor moves bagged building material.
- Act: The operator stops and reports the failure; the supervisor holds the whole affected line.
- Hold / review: Hold if guard function, isolation, run-down, linked restart or personnel accounting is uncertain.
Competent repair investigates the interlock and service change. No production running or improvised powered test occurs while a person is exposed. Restore guards, clear tools and people, perform the specified protected stop/restart test, record the result and obtain named release.
Apply it: At which point would you hold this example, and what evidence would allow it to proceed?
Read this part of the full topicOpen the full topicHSE maintenance of work equipment (Great Britain)HSE inspection of work equipment (Great Britain)HSE L22 Safe use of work equipment (Great Britain; approved for use in NI via HSENI)4. Why does the distinction matter?
Connect the task, the route to the person and the control that can fail.
- Source / exposure: If the wrong check is chosen, a defect can remain hidden until a person meets moving machinery, a load falls or stored pressure is released.
- Possible consequence: A quarterly conveyor service might change a bearing but leave an interlock disconnected.
- Control failure: A forklift service might overlook a lifting-chain defect requiring competent examination.
If the wrong check is chosen, a defect can remain hidden until a person meets moving machinery, a load falls or stored pressure is released.
Apply it: Who could be exposed, including other trades, cleaners, maintainers and people nearby?
Read this part of the full topicOpen the full topicHSE inspection of work equipment (Great Britain)HSE thorough examination of lifting equipment (Great Britain)HSE pressure systems regulations overview (Great Britain)5. Choose controls for maintenance, inspection and testing of work equipment and machinery
Start with the stronger practicable options and verify their effect.
- Eliminate: At purchase or modification, the engineer moves lubrication, adjustment or condition-monitoring points outside the danger zone where practicable, so routine checks do not require guard removal or access beside moving parts.
- Reduce: The engineer evaluates an alternative bearing or maintainable assembly that reduces intervention frequency or permits servicing from a protected location, subject to the machine specification and change assessment.
- Isolate: For the repair, authorised staff identify and isolate the conveyor and connected feeds, prevent reconnection, control stored energy and support parts that could move or fall using the machine-specific method.
- Control: The engineer defines a protected functional test with the required response and acceptance criteria, and the supervisor keeps everyone out of the danger zone.
- PPE: Select eye protection for particles and other task-specific protection where residual exposure remains.
Eliminate: At purchase or modification, the engineer moves lubrication, adjustment or condition-monitoring points outside the danger zone where practicable, so routine checks do not require guard removal or access beside moving parts. Reduce: The engineer evaluates an alternative bearing or maintainable assembly that reduces intervention frequency or permits servicing from a protected location, subject to the machine specification and change assessment. Isolate: For the repair, authorised staff identify and isolate the conveyor and connected feeds, prevent reconnection, control stored energy and support parts that could move or fall using the machine-specific method. Control: The engineer defines a protected functional test with the required response and acceptance criteria, and the supervisor keeps everyone out of the danger zone. PPE: Select eye protection for particles and other task-specific protection where residual exposure remains. Read the full control table for qualifications, ownership and verification. Use the actual task and applicable jurisdiction; existing technical approval remains unchanged.
Apply it: Which stronger option can be used here, and who will verify it before accepting the remaining risk?
Read this part of the full topicOpen the full topicHSE managing risk using PPE (Great Britain; apply separate Northern Ireland law where relevant, Great Britain)HSE maintenance of work equipment (Great Britain)HSE inspection of work equipment (Great Britain)6. Use the full maintenance, inspection and testing of work equipment and machinery lesson
Follow the official sources below and retain the task-specific evidence.
- Official guidance: HSE inspection of work equipment
- Official guidance: HSE maintenance of work equipment
- Task decision: Keep defect and hold record, isolation method, repair, functional test, affected inspection decision, contractor handback and recurring-failure review.
Apply it: Which official source and full-topic section will you use to resolve the next decision?
Read this part of the full topicOpen the full topicHSE inspection of work equipment (Great Britain)HSE maintenance of work equipment (Great Britain)HSE LOLER overview (Great Britain)
Simplified learning guide. Use the full topic, current official guidance and the actual work arrangements. Workplace scenarios labelled fictional are illustrative examples.
The Provision and Use of Work Equipment Regulations (PUWER), Lifting Operations and Lifting Equipment Regulations (LOLER) and Pressure Systems Safety Regulations (PSSR) each have distinct scope in GB and NI. A service sheet can show lubrication but not that an interlock stops a conveyor. A pre-use check can reveal an obvious damaged guard but does not replace a competent inspection where deterioration or installation creates significant risk. Lifting-equipment thorough examination and pressure-system written-scheme examination have different legal purposes and qualified examiners. HSE maintenance of work equipment, HSE inspection of work equipment, HSE LOLER overview and HSE pressure systems regulations overview.
Download comparison table (PDF · A4 landscape)
How can the ISO 45001 hierarchy of controls reduce machinery risks during maintenance, inspection and testing?
Choose the safe intervention and test method before a maintainer approaches danger. Design out unnecessary access, use engineered separation and secure isolation for the planned work, then support those measures with competent instruction, controlled tests and residual PPE.
Illustrative decision: BuildOut replaces a conveyor bearing and checks the protective interlock. Mechanical repair and demonstration of the safety function are separate tasks. The engineer specifies the isolation and the protected test; the supervisor coordinates operators, cleaners and linked equipment.
ERICPD means Eliminate, Reduce (including substitution), Isolate, Control, PPE and Discipline. The five-level hierarchy groups measures as elimination, substitution, engineering controls, administrative controls and PPE. They overlap: isolation is usually an engineering measure; control can include engineered and administrative measures. Discipline means maintaining and checking the controls, supervising the method and learning from defects, rather than blaming someone or accepting weaker protection.
How can the ERICPD hierarchy of controls reduce machinery risks during maintenance, inspection and testing?
ERICPD is a planning crossmap. Its prompts do not add a sixth rung or rank Isolate above engineering. Discipline verifies and sustains every control level.
How can the ISO 45001 hierarchy of controls reduce machinery risks during maintenance, inspection and testing?
The hierarchy of controls in ISO 45001:2018 comes under Clause 8.1.2 (Eliminating hazards and reducing OH&S risks), which is located within Clause 8 ("Operation").
ESEAP: Elimination, Substitution, Engineering controls, Administrative controls and PPE. Control order: HSE hierarchy of controls and IOSH hierarchy of control guidance.
The comparison is an original illustrative application of the general HSE hierarchy, not a machine-specific method, permit or design approval. The employer must choose measures for the actual work and jurisdiction. Apply the separate Northern Ireland legal route where relevant; the local assessment and competent technical decision govern release.
Sources: HSE hierarchy of controls; HSE maintenance of work equipment; HSE inspection of work equipment; HSENI PUWER 1999.
Applied case
An operator reports a steering or braking concern before the next loading run. At handover, someone says that assigning an action owner is enough to restart. Decide what is still needed.
Compare your decision
Name who owns the work, verify implementation and check effectiveness in real conditions. A learning result or request for control does not close an operational action.
Name who owns the work, verify implementation and check effectiveness in real conditions. A learning result or request for control does not close an operational action. Ownership and training support the control but do not demonstrate its effectiveness.
Lesson 9Weather and visibility change the yard
Hold the affected movement and have the responsible person reassess the actual route, surface, visibility and safe alternatives.
Read the scene evidence
Heavy rain, ice or poor light changes the conditions for a planned delivery movement.
Identify the condition separately from the exposed person and any possible outcome.
How the harm pathway develops
Deteriorated grip and visibility at a vehicle and pedestrian interface
Heavy rain, ice or poor light changes the conditions for a planned delivery movement.
How people can be exposed
A person or vehicle enters a route whose visibility or surface no longer suits the planned movement.
Possible harm
Collision, loss of control or a fall.
Compare the work arrangements
Download comparison table (PDF · A4 landscape)
Select controls by how they prevent harm
Immediate protection and longer-term changes have different purposes. Explore each level and check what is feasible for the actual site, task and people.
Use the five-level hierarchy below. Inspection, instruction and supervision sustain every chosen control; they do not replace physical prevention.
Verify, communicate and hand back
Name who owns the work, verify implementation and check effectiveness in real conditions. A learning result or request for control does not close an operational action.
Explain the task-specific evidence, who must act and what restriction remains until it is resolved. A closed action or a course badge cannot establish a live site condition.
What is workplace transport and work-related driving?
It covers vehicle movement in workplaces and journeys people make by road for work.
HSE means the Health and Safety Executive for Great Britain; HSENI means the Health and Safety Executive for Northern Ireland. Use the legal and regulator route for the work location.
Site traffic includes people on foot as well as lift trucks, lorries, vans and mobile plant. Work-related road travel includes company vehicles and private vehicles used for business. Map where their paths meet, including deliveries, loading, reversing and temporary changes. Design out movements and separate routes before relying on signs, signals or a person standing close to a moving vehicle.
The strongest framework is safe site, safe vehicle and safe driver, with safe journey added for public-road driving. Transport incidents often involve interface risk: pedestrians in vehicle routes, reversing, blind spots, loading/unloading, visiting drivers, poor lighting, temporary routes, rushing, fatigue or communication failure.
A banksman or sign is not a substitute for good layout. The best control is to remove or physically separate the conflict before relying on people to see each other at the last moment.
Sources: HSE Workplace transport; HSENI Workplace transport
How can the ISO 45001 hierarchy of controls prevent vehicle collisions during workplace transport and work journeys?
Remove the hazard where reasonably practicable. If it remains, consider a safer method, engineering controls and safe work arrangements before personal protective equipment for residual risk.
HSE places elimination, substitution, engineering, administrative controls and personal protective equipment in that order. Verify that the chosen controls work on the actual task.
ERICPD (Eliminate, Reduce including substitution, Isolate, Control, personal protective equipment (PPE), Discipline) is a SHARE decision prompt cross-mapped to HSE’s five-level hierarchy. Apply it to the vehicle movement, loading task and road journey separately. A sign, banksman or high-visibility garment cannot compensate for a layout that repeatedly puts people in the vehicle path.
How can the ERICPD hierarchy of controls prevent vehicle collisions during workplace transport and work journeys?
ERICPD is a planning crossmap. Its prompts do not add a sixth rung or rank Isolate above engineering. Discipline verifies and sustains every control level.
How can the ISO 45001 hierarchy of controls prevent vehicle collisions during workplace transport and work journeys?
The hierarchy of controls in ISO 45001:2018 comes under Clause 8.1.2 (Eliminating hazards and reducing OH&S risks), which is located within Clause 8 ("Operation").
ESEAP: Elimination, Substitution, Engineering controls, Administrative controls and PPE. Control order: HSE hierarchy of controls and IOSH hierarchy of control guidance.
Sources: HSE hierarchy of control
Control-map basis: HSE hierarchy of control; HSE Workplace transport checklist, reversing; HSE Driving and riding safely for work; HSE Workplace transport; HSE Safe workplace; HSE Safe drivers
Applied case
Heavy rain, ice or poor light changes the conditions for a planned delivery movement. At handover, someone says that assigning an action owner is enough to restart. Decide what is still needed.
Compare your decision
Name who owns the work, verify implementation and check effectiveness in real conditions. A learning result or request for control does not close an operational action.
Name who owns the work, verify implementation and check effectiveness in real conditions. A learning result or request for control does not close an operational action. Ownership and training support the control but do not demonstrate its effectiveness.
Lesson 10The traffic plan no longer matches the yard
Hold the conflicting movements, protect people from a safe position and ask the logistics lead to establish and verify a separated route before releasing traffic.
Read the scene evidence
A delivery overflow has covered the protected walkway. The noticeboard still shows yesterday’s route, and a visiting driver is following it towards reception.
Identify the condition separately from the exposed person and any possible outcome.
How the harm pathway develops
A temporary stock area diverts pedestrians through a working vehicle route.
A delivery overflow has covered the protected walkway. The noticeboard still shows yesterday’s route, and a visiting driver is following it towards reception.
How people can be exposed
People follow the old plan or the shortest apparent route into vehicle movements.
Possible harm
A pedestrian could be struck or trapped by a moving vehicle.
Compare the work arrangements
Download comparison table (PDF · A4 landscape)
Select controls by how they prevent harm
Immediate protection and longer-term changes have different purposes. Explore each level and check what is feasible for the actual site, task and people.
Use the five-level hierarchy below. Inspection, instruction and supervision sustain every chosen control; they do not replace physical prevention.
Verify, communicate and hand back
Name who owns the work, verify implementation and check effectiveness in real conditions. A learning result or request for control does not close an operational action.
Explain the task-specific evidence, who must act and what restriction remains until it is resolved. A closed action or a course badge cannot establish a live site condition.
What should a practical traffic layout model include?
A useful layout drawing shows both normal and changed routes, the people exposed and the clearance needed by the actual vehicle; it is checked on site.
Show separate pedestrian and vehicle entry, direct walkways, controlled crossings, loading and turning space, parking, visibility, lighting, gradients, overhead services and emergency access. Recheck the plan when scaffolds, hoarding, road plates, excavations or welfare routes change; temporary works can create new vehicle-pedestrian interfaces. Check the path people actually choose, including disabled access and visiting drivers. Barriers must suit the site risk rather than merely look robust.
A drawing is a communication tool, not proof of safety. The route must be walked and driven under representative conditions and changed after a near miss, altered phase, new vehicle or failed control.
How should traffic management be assured?
Walk routes at busy times and after changes. Check separation, visibility, reversing need, visiting-driver knowledge and whether stopped movements restart only after correction and hand-back.
Applied case
A delivery overflow has covered the protected walkway. The noticeboard still shows yesterday’s route, and a visiting driver is following it towards reception. At handover, someone says that assigning an action owner is enough to restart. Decide what is still needed.
Compare your decision
Name who owns the work, verify implementation and check effectiveness in real conditions. A learning result or request for control does not close an operational action.
Name who owns the work, verify implementation and check effectiveness in real conditions. A learning result or request for control does not close an operational action. Ownership and training support the control but do not demonstrate its effectiveness.
Lesson 11A forklift load blocks the driver’s view
Keep the move on hold and people outside the operating area. Ask the authorised operator and supervisor to confirm a suitable load, equipment and travel method before movement.
Read the scene evidence
A tall packaged load blocks the forklift operator’s forward view. An agency worker is about to cross the proposed route while dispatch asks for a quick move.
Identify the condition separately from the exposed person and any possible outcome.
How the harm pathway develops
The proposed forklift movement has no demonstrated clear view or protected travel arrangement.
A tall packaged load blocks the forklift operator’s forward view. An agency worker is about to cross the proposed route while dispatch asks for a quick move.
How people can be exposed
A driver may not see a person or obstacle within the truck’s travel or turning area.
Possible harm
Vehicle impact, trapping or a displaced load could cause serious injury.
Compare the work arrangements
Download comparison table (PDF · A4 landscape)
Select controls by how they prevent harm
Immediate protection and longer-term changes have different purposes. Explore each level and check what is feasible for the actual site, task and people.
Use the five-level hierarchy below. Inspection, instruction and supervision sustain every chosen control; they do not replace physical prevention.
Verify, communicate and hand back
Name who owns the work, verify implementation and check effectiveness in real conditions. A learning result or request for control does not close an operational action.
Explain the task-specific evidence, who must act and what restriction remains until it is resolved. A closed action or a course badge cannot establish a live site condition.
How does the safe site, safe vehicle, safe driver and safe journey model work?
The model separates transport risk into parts that can be checked, owned and improved.
Workplace transport and road driving overlap, but they need different controls. A yard needs route design, segregation, reversing control and loading rules. A road journey needs planning, fatigue control, vehicle roadworthiness, phone rules, weather decisions and realistic schedules.
The model is useful because it stops organisations blaming the driver for risks created by layout, deadlines, vehicle defects, poor delivery control or unmanaged grey fleet.
When are banksmen useful and where do they fail?
Banksmen can support controlled movements, but they do not replace segregation, layout and vehicle controls.
A banksman is sometimes needed for reversing, lifting, manoeuvring or complex vehicle movements. But using a banksman as the main control for poor design is weak. The banksman can be struck, ignored, hidden in a blind spot or drawn into the line of fire.
If a movement happens repeatedly, redesign the route or loading area where practicable rather than relying on manual signalling every time.
One-off complex delivery. Banksman role: Control movement and communication; Better design question: Can timing and area be isolated?.
Routine reversing. Banksman role: May support but should not be default; Better design question: Can one-way route remove reversing?.
Poor visibility. Banksman role: Guide only from safe position; Better design question: Can cameras, mirrors or route design improve visibility?.
Public interface. Banksman role: Coordinate with barriers and exclusion; Better design question: Can public be physically separated?.
No safe standing point. Banksman role: Do not use banksman as sacrificial control; Better design question: Redesign movement or stop.
How does work-related road driving fit into workplace transport?
Road risk needs safe journey, safe driver and safe vehicle controls alongside site transport controls.
Many organisations manage site vehicles carefully but overlook road journeys. A field engineer driving between jobs, a manager visiting sites or a worker using a private car for business still creates work-related road risk.
The organisation should control journey need, timing, fatigue, distraction, vehicle condition, driver competence, insurance, emergency arrangements and pressure from appointments or delivery targets.
Journey need. Good practice: Avoid unnecessary journeys; Weak practice: Drive because it is habit.
Timing. Good practice: Allow rest and realistic schedules; Weak practice: Back-to-back jobs encourage speeding.
Driver fitness. Good practice: Fatigue and medication concerns can be reported; Weak practice: Drivers fear reporting issues.
Distraction. Good practice: No calls or messages while driving; Weak practice: Work calls expected on the road.
Vehicle. Good practice: Maintenance, tyres and defects are controlled; Weak practice: Private vehicles unchecked.
Emergency. Good practice: Breakdown and lone-worker routes are known; Weak practice: Driver improvises.
Sources: HSE Workplace transport; HSE Driving and riding safely for work; HSE Workplace transport checklist, reversing; HSE Safe workplace; HSENI Driving at work
Is this a work journey?
A private-car trip between work sites is work travel and needs the grey-fleet checks. Ordinary travel between home and the usual workplace is generally commuting; a home-origin journey to somewhere other than the normal workplace may be work travel. Establish the actual purpose and pattern using the applicable GB or NI route, including relevant motorcycles and cycles. Do not classify every journey from home alike.
Fictional road decision: delay changes the plan
A technician’s site-to-site appointment is delayed. The fleet/line manager checks the actual vehicle, authorisation, business-use insurance, defects and driver fatigue, then reschedules or provides another safe arrangement instead of asking the driver to recover time. Hold the journey if the vehicle or driver is not fit for it. Record the revised appointment, work cover and receiving contact; a valid MOT alone does not release the trip.
How can the ISO 45001 hierarchy of controls prevent vehicle collisions during workplace transport and work journeys?
Remove the hazard where reasonably practicable. If it remains, consider a safer method, engineering controls and safe work arrangements before personal protective equipment for residual risk.
HSE places elimination, substitution, engineering, administrative controls and personal protective equipment in that order. Verify that the chosen controls work on the actual task.
ERICPD (Eliminate, Reduce including substitution, Isolate, Control, personal protective equipment (PPE), Discipline) is a SHARE decision prompt cross-mapped to HSE’s five-level hierarchy. Apply it to the vehicle movement, loading task and road journey separately. A sign, banksman or high-visibility garment cannot compensate for a layout that repeatedly puts people in the vehicle path.
How can the ERICPD hierarchy of controls prevent vehicle collisions during workplace transport and work journeys?
ERICPD is a planning crossmap. Its prompts do not add a sixth rung or rank Isolate above engineering. Discipline verifies and sustains every control level.
How can the ISO 45001 hierarchy of controls prevent vehicle collisions during workplace transport and work journeys?
The hierarchy of controls in ISO 45001:2018 comes under Clause 8.1.2 (Eliminating hazards and reducing OH&S risks), which is located within Clause 8 ("Operation").
ESEAP: Elimination, Substitution, Engineering controls, Administrative controls and PPE. Control order: HSE hierarchy of controls and IOSH hierarchy of control guidance.
Sources: HSE hierarchy of control
Control-map basis: HSE hierarchy of control; HSE Workplace transport checklist, reversing; HSE Driving and riding safely for work; HSE Workplace transport; HSE Safe workplace; HSE Safe drivers
Applied case
A tall packaged load blocks the forklift operator’s forward view. An agency worker is about to cross the proposed route while dispatch asks for a quick move. At handover, someone says that assigning an action owner is enough to restart. Decide what is still needed.
Compare your decision
Name who owns the work, verify implementation and check effectiveness in real conditions. A learning result or request for control does not close an operational action.
Name who owns the work, verify implementation and check effectiveness in real conditions. A learning result or request for control does not close an operational action. Ownership and training support the control but do not demonstrate its effectiveness.
Lesson 12Shift handover: connect the hazards
Defend the stopping condition and the evidence needed for release.
Reconstruct the whole task
Two deliveries arrive together in heavy rain. A visiting driver cannot find the waiting point, a trailer is being unloaded and a forklift has a reported defect.
The last pallet is on the dock, but the driver has not received a clear release and a colleague is still checking inside the trailer.
Maintain the agreed prevention of premature departure until people and equipment are clear and the authorised handover is complete.
Build an evidence-led handover
Use the documents as working tools
Map the task, people, exposure pathway, existing controls, missing evidence and review trigger. Use the fictional course case.
Prepare a five-minute task briefing. Ask a scenario question and check understanding, rather than relying on an attendance signature.
Find who owns the control, who can authorise release and how a worker escalates a defect. Check the actual local arrangements.
Compare a claim with an observation, a relevant record and a competent explanation. Record open actions and verify closure.
How does the safe site, safe vehicle, safe driver and safe journey model work?
The model separates transport risk into parts that can be checked, owned and improved.
Workplace transport and road driving overlap, but they need different controls. A yard needs route design, segregation, reversing control and loading rules. A road journey needs planning, fatigue control, vehicle roadworthiness, phone rules, weather decisions and realistic schedules.
The model is useful because it stops organisations blaming the driver for risks created by layout, deadlines, vehicle defects, poor delivery control or unmanaged grey fleet.
When are banksmen useful and where do they fail?
Banksmen can support controlled movements, but they do not replace segregation, layout and vehicle controls.
A banksman is sometimes needed for reversing, lifting, manoeuvring or complex vehicle movements. But using a banksman as the main control for poor design is weak. The banksman can be struck, ignored, hidden in a blind spot or drawn into the line of fire.
If a movement happens repeatedly, redesign the route or loading area where practicable rather than relying on manual signalling every time.
One-off complex delivery. Banksman role: Control movement and communication; Better design question: Can timing and area be isolated?.
Routine reversing. Banksman role: May support but should not be default; Better design question: Can one-way route remove reversing?.
Poor visibility. Banksman role: Guide only from safe position; Better design question: Can cameras, mirrors or route design improve visibility?.
Public interface. Banksman role: Coordinate with barriers and exclusion; Better design question: Can public be physically separated?.
No safe standing point. Banksman role: Do not use banksman as sacrificial control; Better design question: Redesign movement or stop.
How does work-related road driving fit into workplace transport?
Road risk needs safe journey, safe driver and safe vehicle controls alongside site transport controls.
Many organisations manage site vehicles carefully but overlook road journeys. A field engineer driving between jobs, a manager visiting sites or a worker using a private car for business still creates work-related road risk.
The organisation should control journey need, timing, fatigue, distraction, vehicle condition, driver competence, insurance, emergency arrangements and pressure from appointments or delivery targets.
Journey need. Good practice: Avoid unnecessary journeys; Weak practice: Drive because it is habit.
Timing. Good practice: Allow rest and realistic schedules; Weak practice: Back-to-back jobs encourage speeding.
Driver fitness. Good practice: Fatigue and medication concerns can be reported; Weak practice: Drivers fear reporting issues.
Distraction. Good practice: No calls or messages while driving; Weak practice: Work calls expected on the road.
Vehicle. Good practice: Maintenance, tyres and defects are controlled; Weak practice: Private vehicles unchecked.
Emergency. Good practice: Breakdown and lone-worker routes are known; Weak practice: Driver improvises.
Sources: HSE Workplace transport; HSE Driving and riding safely for work; HSE Workplace transport checklist, reversing; HSE Safe workplace; HSENI Driving at work
Is this a work journey?
A private-car trip between work sites is work travel and needs the grey-fleet checks. Ordinary travel between home and the usual workplace is generally commuting; a home-origin journey to somewhere other than the normal workplace may be work travel. Establish the actual purpose and pattern using the applicable GB or NI route, including relevant motorcycles and cycles. Do not classify every journey from home alike.
Fictional road decision: delay changes the plan
A technician’s site-to-site appointment is delayed. The fleet/line manager checks the actual vehicle, authorisation, business-use insurance, defects and driver fatigue, then reschedules or provides another safe arrangement instead of asking the driver to recover time. Hold the journey if the vehicle or driver is not fit for it. Record the revised appointment, work cover and receiving contact; a valid MOT alone does not release the trip.
Applied case
The last pallet is on the dock, but the driver has not received a clear release and a colleague is still checking inside the trailer.
Compare your decision
Maintain the agreed prevention of premature departure until people and equipment are clear and the authorised handover is complete.
Maintain the agreed prevention of premature departure until people and equipment are clear and the authorised handover is complete.
Lesson 13Your workplace transfer challenge
Turn one lesson into a bounded check with an owner and a review trigger.
Prepare a useful task briefing
Manage arrival, positioning, transfer and departure as one sequence.
Use the printable course workbook to describe one fictional task. State who could be exposed, the harmful mechanism, a higher-level control, the immediate restriction and the evidence needed to close the action.
Test understanding and inspect the arrangement
Check the delivery handover and release conditions before a vehicle departs.
Ask the team what they would do if the control failed. Compare their answer with the actual arrangements and the source teaching. Check both what people understand and whether the physical control works.
Keep learning and operational authority clear
Independent warehouse awareness and decision practice for a GB baseline; check corresponding Northern Ireland duties and site arrangements. Completion is not practical competence, a licence or authority for specialist work.
The workbook is a practice document. Use the authorised workplace system for real risk assessments, permits, defect reports and audits. Video demonstrations can be added later; no missing video is required to complete this course.
Applied case
You are asked to prepare a toolbox talk and a check for the next shift. The current document says only: be more careful.
Compare your decision
Identify the task, responsible role, required evidence, restriction and trigger for review.
A useful action connects the work to its owner, evidence and a clear decision boundary.