Mezzanines, work at height and escape routes
Free online training · Approximate learning time: 150–230 minutes · Self-paced
Full public teaching and readers are free without an account. A free learner account is required for saved LMS progress and recorded assessment. Completion and any course-completion certificate depend on the configured LMS conditions. Open the course overview.
Lesson 1Consider both the person above and the person below
Recognise falls, dropped objects and unsafe access to roofs or edges.
Consider both the person above and the person below
Work at height includes places where a fall could cause injury; the name of the task does not determine the risk. Consider access, working position, edge protection, floor openings and objects that could fall onto people below.
Keep access, storage and fire precautions effective.
Follow the task through the area
A missing section of edge protection
A gate or guard section is open while people move stock near the mezzanine edge.
Loose items above a busy walkway
Loose tools and cartons are stored near a mezzanine edge above a pedestrian route.
The escape stair is used for storage
Returned cartons have been left across part of the mezzanine escape route.
A quick roof inspection crosses fragile material
A leak inspection is proposed from a roof-access point without a confirmed safe route or rescue plan.
A fire door is wedged open for stock movement
A door to the protected stair is wedged open to move cartons. Staff assume the alarm will compensate, but the door cannot perform its intended separation function.
Challenge the first impression
Immediate protection and longer-term changes have different purposes. Explore each level and check what is feasible for the actual site, task and people.
Name who owns the work, verify implementation and check effectiveness in real conditions. A learning result or request for control does not close an operational action.
What counts as work at height?
It is work in any place where a person could fall a distance liable to cause personal injury if precautions were absent; there is no universal two-metre trigger.
Best-practice guide · six simple steps
Best-practice guide: Working at Height
Start with the key actions, then explore value, a workplace example, harm, stronger controls and further help. Choose a step or use Previous and Next; the guide does not advance automatically.
Step 1 of 6 · StartThis cardPNG imagePDFView full sizeAll 6 cardsPNG images (ZIP)PDF (6 pages)Keep one card or the full set for social sharing, team briefings and learning. Each PDF contains one card per page. Read the full topic for explanations, questions and source links.
Read all six steps as text
1. Avoid height, then prevent the remaining fall
Use the actual task, structure and conditions to choose the method.
- Avoid: Complete the task from ground level where reasonably practicable.
- Prevent: Use a suitable safe place or collective fall prevention where work at height remains.
- Minimise: Plan the distance, consequences and rescue for a remaining fall risk.
Keep the work-at-height sequence: avoid the work where reasonably practicable, prevent falls, then minimise the distance and consequences of a remaining fall. Choose collective protection before personal protection at each level. A short task or a fall below two metres can still cause severe injury.
Apply it: Can the task be completed without approaching a fragile surface, opening or unprotected edge?
Read this part of the full topicOpen the full topicWork at Height Regulations 2005 (Great Britain law)Work at Height Regulations (Northern Ireland) 2005 (Northern Ireland law)HSE introduction to working at height safely (Great Britain regulator guidance)2. Turn working at height knowledge into a decision
Use the evidence to improve the actual work arrangement.
- Change at source: Lower a lighting mast for servicing or inspect from a suitable ground-level method so the worker does not need to reach an edge or fragile surface.
- Make it observable: Facilities or design owner verifies access, reach, electrical interfaces and the completed task.
- Keep useful evidence: Survey, method choice, equipment checks, exclusion check, handback and defect record.
Work at height is any work where a person could fall far enough to be injured if precautions were absent; there is no universal two-metre threshold. A fall through a fragile rooflight, from an edge or into an opening can be fatal even during a short task. Survey, method choice, equipment checks, exclusion check, handback and defect record.
Apply it: What evidence would show that the change improves this task, rather than only completing a record?
Read this part of the full topicOpen the full topicHSE Managing risk using PPE (Great Britain)HSE step-by-step guide (Great Britain regulator guidance)HSE mobile elevating work platforms (Great Britain construction guidance)3. Inspect ageing rooflights without stepping on the roof
Fictional example: a practical application of the existing topic lesson.
- Setting: Inspect ageing rooflights without stepping on a suspect roof.
- Act: Review fragility and whether an internal or MEWP method can reach the task; exclude people below.
- Hold / review: Hold if roof strength, route or protection is uncertain or wind exceeds the equipment limit.
Use the selected protected method; maintain edge and opening protection and monitor weather. Leave barriers until access is closed; record defects and owner for repair.
Apply it: At which point would you hold this example, and what evidence would allow it to proceed?
Read this part of the full topicOpen the full topicHSE GEIS5 fragile roofs (Great Britain regulator guidance)HSE roof work (Great Britain construction guidance)Work at Height Regulations 2005 (Great Britain law)4. How does the work lead to harm? decision table
Connect the task, the route to the person and the control that can fail.
- Fragile rooflight or sheet: The surface gives way and a person falls through into the space below.
- Edge, opening or ladder: A slip or overreach leads to a fall onto a hard or obstructed landing.
- Dropped tool or material: A person below is struck even though the worker above remains protected.
Fragile rooflight or sheet: The surface gives way and a person falls through into the space below. Edge, opening or ladder: A slip or overreach leads to a fall onto a hard or obstructed landing. Dropped tool or material: A person below is struck even though the worker above remains protected.
Apply it: Who could be exposed, including other trades, cleaners, maintainers and people nearby?
Read this part of the full topicOpen the full topicHSE introduction to working at height safely (Great Britain regulator guidance)HSE roof work (Great Britain construction guidance)HSENI working at height (Northern Ireland regulator information)5. Use the work-at-height control sequence
Start with the stronger practicable options and verify their effect.
- Avoid height: Use a suitable ground-level inspection or servicing method.
- Prevent collectively: Provide a suitable guarded platform, edge protection or other collective system.
- Prevent personally: Use designed restraint only where appropriate to the assessed task.
- Minimise a fall: Use suitable collective measures before a justified personal fall-arrest system.
- Verify and rescue: Check equipment, anchors, clearance, weather limits and timely rescue.
The legal sequence remains avoid, prevent, minimise. Collective protection takes priority over personal protection. Restraint prevents reaching a fall position; fall arrest allows a fall and requires suitable clearance and a planned rescue. Neither establishes that an uncertain roof is sound.
Apply it: What proves the selected equipment protects this task and permits the planned rescue?
Read this part of the full topicOpen the full topicHSE Managing risk using PPE (Great Britain)HSE step-by-step guide (Great Britain regulator guidance)HSE mobile elevating work platforms (Great Britain construction guidance)6. Use the full working at height lesson
Follow the official sources below and retain the task-specific evidence.
- Official guidance: Work at Height Regulations 2005
- Official guidance: Work at Height Regulations (Northern Ireland) 2005
- Task decision: Survey, method choice, equipment checks, exclusion check, handback and defect record.
Apply it: Which official source and full-topic section will you use to resolve the next decision?
Read this part of the full topicOpen the full topicWork at Height Regulations 2005 (Great Britain law)Work at Height Regulations (Northern Ireland) 2005 (Northern Ireland law)HSE introduction to working at height safely (Great Britain regulator guidance)
Simplified learning guide. Use the full topic, current official guidance and the actual work arrangements. Workplace scenarios labelled fictional are illustrative examples.
HSE means the Health and Safety Executive for Great Britain; HSENI means the Health and Safety Executive for Northern Ireland. Use the legal and regulator route for the work location.
This can include work above ground, near an opening, or at ground level beside a fragile surface over a void. Assess the actual fall path, not just floor height. Ordinary stairs that form a permanent workplace are not automatically a work-at-height task.
Sources: Work at Height Regulations 2005; Work at Height Regulations (Northern Ireland) 2005; HSE introduction to working at height safely
Applied case
Stock is being moved on a mezzanine. An open edge, objects near the boundary, a blocked escape route and a wedged fire door are treated as separate small problems.
Compare your decision
Work at height includes places where a fall could cause injury; the name of the task does not determine the risk. Consider access, working position, edge protection, floor openings and objects that could fall onto people below.
Work at height includes places where a fall could cause injury; the name of the task does not determine the risk. Consider access, working position, edge protection, floor openings and objects that could fall onto people below. Check the actual conditions and retain protection while gaps are resolved.
Lesson 2An escape route must work when needed
Keep escape routes and fire doors effective during everyday work.
An escape route must work when needed
An escape route is more than an exit sign. It must remain usable for the people present, with doors and protection functioning as intended. Temporary storage and wedged doors can undermine an otherwise well-designed arrangement.
Keep access, storage and fire precautions effective.
Follow the task through the area
A missing section of edge protection
A gate or guard section is open while people move stock near the mezzanine edge.
Loose items above a busy walkway
Loose tools and cartons are stored near a mezzanine edge above a pedestrian route.
The escape stair is used for storage
Returned cartons have been left across part of the mezzanine escape route.
A quick roof inspection crosses fragile material
A leak inspection is proposed from a roof-access point without a confirmed safe route or rescue plan.
A fire door is wedged open for stock movement
A door to the protected stair is wedged open to move cartons. Staff assume the alarm will compensate, but the door cannot perform its intended separation function.
Challenge the first impression
Immediate protection and longer-term changes have different purposes. Explore each level and check what is feasible for the actual site, task and people.
Name who owns the work, verify implementation and check effectiveness in real conditions. A learning result or request for control does not close an operational action.
What counts as work at height?
It is work in any place where a person could fall a distance liable to cause personal injury if precautions were absent; there is no universal two-metre trigger.
Best-practice guide · six simple steps
Best-practice guide: Working at Height
Start with the key actions, then explore value, a workplace example, harm, stronger controls and further help. Choose a step or use Previous and Next; the guide does not advance automatically.
Step 1 of 6 · StartThis cardPNG imagePDFView full sizeAll 6 cardsPNG images (ZIP)PDF (6 pages)Keep one card or the full set for social sharing, team briefings and learning. Each PDF contains one card per page. Read the full topic for explanations, questions and source links.
Read all six steps as text
1. Avoid height, then prevent the remaining fall
Use the actual task, structure and conditions to choose the method.
- Avoid: Complete the task from ground level where reasonably practicable.
- Prevent: Use a suitable safe place or collective fall prevention where work at height remains.
- Minimise: Plan the distance, consequences and rescue for a remaining fall risk.
Keep the work-at-height sequence: avoid the work where reasonably practicable, prevent falls, then minimise the distance and consequences of a remaining fall. Choose collective protection before personal protection at each level. A short task or a fall below two metres can still cause severe injury.
Apply it: Can the task be completed without approaching a fragile surface, opening or unprotected edge?
Read this part of the full topicOpen the full topicWork at Height Regulations 2005 (Great Britain law)Work at Height Regulations (Northern Ireland) 2005 (Northern Ireland law)HSE introduction to working at height safely (Great Britain regulator guidance)2. Turn working at height knowledge into a decision
Use the evidence to improve the actual work arrangement.
- Change at source: Lower a lighting mast for servicing or inspect from a suitable ground-level method so the worker does not need to reach an edge or fragile surface.
- Make it observable: Facilities or design owner verifies access, reach, electrical interfaces and the completed task.
- Keep useful evidence: Survey, method choice, equipment checks, exclusion check, handback and defect record.
Work at height is any work where a person could fall far enough to be injured if precautions were absent; there is no universal two-metre threshold. A fall through a fragile rooflight, from an edge or into an opening can be fatal even during a short task. Survey, method choice, equipment checks, exclusion check, handback and defect record.
Apply it: What evidence would show that the change improves this task, rather than only completing a record?
Read this part of the full topicOpen the full topicHSE Managing risk using PPE (Great Britain)HSE step-by-step guide (Great Britain regulator guidance)HSE mobile elevating work platforms (Great Britain construction guidance)3. Inspect ageing rooflights without stepping on the roof
Fictional example: a practical application of the existing topic lesson.
- Setting: Inspect ageing rooflights without stepping on a suspect roof.
- Act: Review fragility and whether an internal or MEWP method can reach the task; exclude people below.
- Hold / review: Hold if roof strength, route or protection is uncertain or wind exceeds the equipment limit.
Use the selected protected method; maintain edge and opening protection and monitor weather. Leave barriers until access is closed; record defects and owner for repair.
Apply it: At which point would you hold this example, and what evidence would allow it to proceed?
Read this part of the full topicOpen the full topicHSE GEIS5 fragile roofs (Great Britain regulator guidance)HSE roof work (Great Britain construction guidance)Work at Height Regulations 2005 (Great Britain law)4. How does the work lead to harm? decision table
Connect the task, the route to the person and the control that can fail.
- Fragile rooflight or sheet: The surface gives way and a person falls through into the space below.
- Edge, opening or ladder: A slip or overreach leads to a fall onto a hard or obstructed landing.
- Dropped tool or material: A person below is struck even though the worker above remains protected.
Fragile rooflight or sheet: The surface gives way and a person falls through into the space below. Edge, opening or ladder: A slip or overreach leads to a fall onto a hard or obstructed landing. Dropped tool or material: A person below is struck even though the worker above remains protected.
Apply it: Who could be exposed, including other trades, cleaners, maintainers and people nearby?
Read this part of the full topicOpen the full topicHSE introduction to working at height safely (Great Britain regulator guidance)HSE roof work (Great Britain construction guidance)HSENI working at height (Northern Ireland regulator information)5. Use the work-at-height control sequence
Start with the stronger practicable options and verify their effect.
- Avoid height: Use a suitable ground-level inspection or servicing method.
- Prevent collectively: Provide a suitable guarded platform, edge protection or other collective system.
- Prevent personally: Use designed restraint only where appropriate to the assessed task.
- Minimise a fall: Use suitable collective measures before a justified personal fall-arrest system.
- Verify and rescue: Check equipment, anchors, clearance, weather limits and timely rescue.
The legal sequence remains avoid, prevent, minimise. Collective protection takes priority over personal protection. Restraint prevents reaching a fall position; fall arrest allows a fall and requires suitable clearance and a planned rescue. Neither establishes that an uncertain roof is sound.
Apply it: What proves the selected equipment protects this task and permits the planned rescue?
Read this part of the full topicOpen the full topicHSE Managing risk using PPE (Great Britain)HSE step-by-step guide (Great Britain regulator guidance)HSE mobile elevating work platforms (Great Britain construction guidance)6. Use the full working at height lesson
Follow the official sources below and retain the task-specific evidence.
- Official guidance: Work at Height Regulations 2005
- Official guidance: Work at Height Regulations (Northern Ireland) 2005
- Task decision: Survey, method choice, equipment checks, exclusion check, handback and defect record.
Apply it: Which official source and full-topic section will you use to resolve the next decision?
Read this part of the full topicOpen the full topicWork at Height Regulations 2005 (Great Britain law)Work at Height Regulations (Northern Ireland) 2005 (Northern Ireland law)HSE introduction to working at height safely (Great Britain regulator guidance)
Simplified learning guide. Use the full topic, current official guidance and the actual work arrangements. Workplace scenarios labelled fictional are illustrative examples.
HSE means the Health and Safety Executive for Great Britain; HSENI means the Health and Safety Executive for Northern Ireland. Use the legal and regulator route for the work location.
This can include work above ground, near an opening, or at ground level beside a fragile surface over a void. Assess the actual fall path, not just floor height. Ordinary stairs that form a permanent workplace are not automatically a work-at-height task.
Sources: Work at Height Regulations 2005; Work at Height Regulations (Northern Ireland) 2005; HSE introduction to working at height safely
Applied case
Stock is being moved on a mezzanine. An open edge, objects near the boundary, a blocked escape route and a wedged fire door are treated as separate small problems.
Compare your decision
An escape route is more than an exit sign. It must remain usable for the people present, with doors and protection functioning as intended. Temporary storage and wedged doors can undermine an otherwise well-designed arrangement.
An escape route is more than an exit sign. It must remain usable for the people present, with doors and protection functioning as intended. Temporary storage and wedged doors can undermine an otherwise well-designed arrangement. Check the actual conditions and retain protection while gaps are resolved.
Lesson 3A missing section of edge protection
Keep people and loads away and have the transfer point secured through the authorised procedure.
Read the scene evidence
A gate or guard section is open while people move stock near the mezzanine edge.
Identify the condition separately from the exposed person and any possible outcome.
How the harm pathway develops
An open mezzanine edge at a transfer point
A gate or guard section is open while people move stock near the mezzanine edge.
How people can be exposed
A person or handling aid enters the exposed edge zone.
Possible harm
A fall from height or a load falling onto people below.
Compare the work arrangements
Download comparison table (PDF · A4 landscape)
Select controls by how they prevent harm
Immediate protection and longer-term changes have different purposes. Explore each level and check what is feasible for the actual site, task and people.
Use the five-level hierarchy below. Inspection, instruction and supervision sustain every chosen control; they do not replace physical prevention.
Verify, communicate and hand back
Name who owns the work, verify implementation and check effectiveness in real conditions. A learning result or request for control does not close an operational action.
Explain the task-specific evidence, who must act and what restriction remains until it is resolved. A closed action or a course badge cannot establish a live site condition.
What counts as work at height?
It is work in any place where a person could fall a distance liable to cause personal injury if precautions were absent; there is no universal two-metre trigger.
Best-practice guide · six simple steps
Best-practice guide: Working at Height
Start with the key actions, then explore value, a workplace example, harm, stronger controls and further help. Choose a step or use Previous and Next; the guide does not advance automatically.
Step 1 of 6 · StartThis cardPNG imagePDFView full sizeAll 6 cardsPNG images (ZIP)PDF (6 pages)Keep one card or the full set for social sharing, team briefings and learning. Each PDF contains one card per page. Read the full topic for explanations, questions and source links.
Read all six steps as text
1. Avoid height, then prevent the remaining fall
Use the actual task, structure and conditions to choose the method.
- Avoid: Complete the task from ground level where reasonably practicable.
- Prevent: Use a suitable safe place or collective fall prevention where work at height remains.
- Minimise: Plan the distance, consequences and rescue for a remaining fall risk.
Keep the work-at-height sequence: avoid the work where reasonably practicable, prevent falls, then minimise the distance and consequences of a remaining fall. Choose collective protection before personal protection at each level. A short task or a fall below two metres can still cause severe injury.
Apply it: Can the task be completed without approaching a fragile surface, opening or unprotected edge?
Read this part of the full topicOpen the full topicWork at Height Regulations 2005 (Great Britain law)Work at Height Regulations (Northern Ireland) 2005 (Northern Ireland law)HSE introduction to working at height safely (Great Britain regulator guidance)2. Turn working at height knowledge into a decision
Use the evidence to improve the actual work arrangement.
- Change at source: Lower a lighting mast for servicing or inspect from a suitable ground-level method so the worker does not need to reach an edge or fragile surface.
- Make it observable: Facilities or design owner verifies access, reach, electrical interfaces and the completed task.
- Keep useful evidence: Survey, method choice, equipment checks, exclusion check, handback and defect record.
Work at height is any work where a person could fall far enough to be injured if precautions were absent; there is no universal two-metre threshold. A fall through a fragile rooflight, from an edge or into an opening can be fatal even during a short task. Survey, method choice, equipment checks, exclusion check, handback and defect record.
Apply it: What evidence would show that the change improves this task, rather than only completing a record?
Read this part of the full topicOpen the full topicHSE Managing risk using PPE (Great Britain)HSE step-by-step guide (Great Britain regulator guidance)HSE mobile elevating work platforms (Great Britain construction guidance)3. Inspect ageing rooflights without stepping on the roof
Fictional example: a practical application of the existing topic lesson.
- Setting: Inspect ageing rooflights without stepping on a suspect roof.
- Act: Review fragility and whether an internal or MEWP method can reach the task; exclude people below.
- Hold / review: Hold if roof strength, route or protection is uncertain or wind exceeds the equipment limit.
Use the selected protected method; maintain edge and opening protection and monitor weather. Leave barriers until access is closed; record defects and owner for repair.
Apply it: At which point would you hold this example, and what evidence would allow it to proceed?
Read this part of the full topicOpen the full topicHSE GEIS5 fragile roofs (Great Britain regulator guidance)HSE roof work (Great Britain construction guidance)Work at Height Regulations 2005 (Great Britain law)4. How does the work lead to harm? decision table
Connect the task, the route to the person and the control that can fail.
- Fragile rooflight or sheet: The surface gives way and a person falls through into the space below.
- Edge, opening or ladder: A slip or overreach leads to a fall onto a hard or obstructed landing.
- Dropped tool or material: A person below is struck even though the worker above remains protected.
Fragile rooflight or sheet: The surface gives way and a person falls through into the space below. Edge, opening or ladder: A slip or overreach leads to a fall onto a hard or obstructed landing. Dropped tool or material: A person below is struck even though the worker above remains protected.
Apply it: Who could be exposed, including other trades, cleaners, maintainers and people nearby?
Read this part of the full topicOpen the full topicHSE introduction to working at height safely (Great Britain regulator guidance)HSE roof work (Great Britain construction guidance)HSENI working at height (Northern Ireland regulator information)5. Use the work-at-height control sequence
Start with the stronger practicable options and verify their effect.
- Avoid height: Use a suitable ground-level inspection or servicing method.
- Prevent collectively: Provide a suitable guarded platform, edge protection or other collective system.
- Prevent personally: Use designed restraint only where appropriate to the assessed task.
- Minimise a fall: Use suitable collective measures before a justified personal fall-arrest system.
- Verify and rescue: Check equipment, anchors, clearance, weather limits and timely rescue.
The legal sequence remains avoid, prevent, minimise. Collective protection takes priority over personal protection. Restraint prevents reaching a fall position; fall arrest allows a fall and requires suitable clearance and a planned rescue. Neither establishes that an uncertain roof is sound.
Apply it: What proves the selected equipment protects this task and permits the planned rescue?
Read this part of the full topicOpen the full topicHSE Managing risk using PPE (Great Britain)HSE step-by-step guide (Great Britain regulator guidance)HSE mobile elevating work platforms (Great Britain construction guidance)6. Use the full working at height lesson
Follow the official sources below and retain the task-specific evidence.
- Official guidance: Work at Height Regulations 2005
- Official guidance: Work at Height Regulations (Northern Ireland) 2005
- Task decision: Survey, method choice, equipment checks, exclusion check, handback and defect record.
Apply it: Which official source and full-topic section will you use to resolve the next decision?
Read this part of the full topicOpen the full topicWork at Height Regulations 2005 (Great Britain law)Work at Height Regulations (Northern Ireland) 2005 (Northern Ireland law)HSE introduction to working at height safely (Great Britain regulator guidance)
Simplified learning guide. Use the full topic, current official guidance and the actual work arrangements. Workplace scenarios labelled fictional are illustrative examples.
HSE means the Health and Safety Executive for Great Britain; HSENI means the Health and Safety Executive for Northern Ireland. Use the legal and regulator route for the work location.
This can include work above ground, near an opening, or at ground level beside a fragile surface over a void. Assess the actual fall path, not just floor height. Ordinary stairs that form a permanent workplace are not automatically a work-at-height task.
Sources: Work at Height Regulations 2005; Work at Height Regulations (Northern Ireland) 2005; HSE introduction to working at height safely
How can the hierarchy of controls avoid work at height and reduce remaining fall risks?
Avoid work at height where reasonably practicable; otherwise prevent a fall, then minimise its distance and consequences.
Choose equipment for the actual task and conditions, plan rescue and check that collective measures and the work plan remain effective.
ERICPD (Eliminate, Reduce including substitution, Isolate, Control, personal protective equipment (PPE), Discipline) helps organise the control decision alongside HSE’s five-level hierarchy. For work at height, keep the legal sequence of avoiding the work, preventing a fall and then minimising distance and consequences. Collective protection takes priority over personal protection. A lower-level measure needs a recorded task-based reason when a stronger option cannot be used.
How can the ERICPD hierarchy of controls avoid work at height and reduce remaining fall risks?
ERICPD is a planning crossmap. Its prompts do not add a sixth rung or rank Isolate above engineering. Discipline verifies and sustains every control level.
How can the ISO 45001 hierarchy of controls avoid work at height and reduce remaining fall risks?
The hierarchy of controls in ISO 45001:2018 comes under Clause 8.1.2 (Eliminating hazards and reducing OH&S risks), which is located within Clause 8 ("Operation").
ESEAP: Elimination, Substitution, Engineering controls, Administrative controls and PPE. Control order: HSE hierarchy of controls and IOSH hierarchy of control guidance.
Sources: HSE Work at height
Control-map basis: HSE Managing risk using PPE; HSE step-by-step guide; HSE mobile elevating work platforms; HSE roof work; HSE assessing all work at height; Work at Height Regulations 2005; Work at Height Regulations (Northern Ireland) 2005; HSE introduction to working at height safely
Applied case
A gate or guard section is open while people move stock near the mezzanine edge. At handover, someone says that assigning an action owner is enough to restart. Decide what is still needed.
Compare your decision
Name who owns the work, verify implementation and check effectiveness in real conditions. A learning result or request for control does not close an operational action.
Name who owns the work, verify implementation and check effectiveness in real conditions. A learning result or request for control does not close an operational action. Ownership and training support the control but do not demonstrate its effectiveness.
Lesson 4Loose items above a busy walkway
Keep people clear below and arrange a safe method to secure or remove the material.
Read the scene evidence
Loose tools and cartons are stored near a mezzanine edge above a pedestrian route.
Identify the condition separately from the exposed person and any possible outcome.
How the harm pathway develops
Unsecured material at height over an occupied area
Loose tools and cartons are stored near a mezzanine edge above a pedestrian route.
How people can be exposed
An item is displaced into the occupied space below.
Possible harm
Impact injury from a falling object.
Compare the work arrangements
Download comparison table (PDF · A4 landscape)
Select controls by how they prevent harm
Immediate protection and longer-term changes have different purposes. Explore each level and check what is feasible for the actual site, task and people.
Use the five-level hierarchy below. Inspection, instruction and supervision sustain every chosen control; they do not replace physical prevention.
Verify, communicate and hand back
Name who owns the work, verify implementation and check effectiveness in real conditions. A learning result or request for control does not close an operational action.
Explain the task-specific evidence, who must act and what restriction remains until it is resolved. A closed action or a course badge cannot establish a live site condition.
What counts as work at height?
It is work in any place where a person could fall a distance liable to cause personal injury if precautions were absent; there is no universal two-metre trigger.
Best-practice guide · six simple steps
Best-practice guide: Working at Height
Start with the key actions, then explore value, a workplace example, harm, stronger controls and further help. Choose a step or use Previous and Next; the guide does not advance automatically.
Step 1 of 6 · StartThis cardPNG imagePDFView full sizeAll 6 cardsPNG images (ZIP)PDF (6 pages)Keep one card or the full set for social sharing, team briefings and learning. Each PDF contains one card per page. Read the full topic for explanations, questions and source links.
Read all six steps as text
1. Avoid height, then prevent the remaining fall
Use the actual task, structure and conditions to choose the method.
- Avoid: Complete the task from ground level where reasonably practicable.
- Prevent: Use a suitable safe place or collective fall prevention where work at height remains.
- Minimise: Plan the distance, consequences and rescue for a remaining fall risk.
Keep the work-at-height sequence: avoid the work where reasonably practicable, prevent falls, then minimise the distance and consequences of a remaining fall. Choose collective protection before personal protection at each level. A short task or a fall below two metres can still cause severe injury.
Apply it: Can the task be completed without approaching a fragile surface, opening or unprotected edge?
Read this part of the full topicOpen the full topicWork at Height Regulations 2005 (Great Britain law)Work at Height Regulations (Northern Ireland) 2005 (Northern Ireland law)HSE introduction to working at height safely (Great Britain regulator guidance)2. Turn working at height knowledge into a decision
Use the evidence to improve the actual work arrangement.
- Change at source: Lower a lighting mast for servicing or inspect from a suitable ground-level method so the worker does not need to reach an edge or fragile surface.
- Make it observable: Facilities or design owner verifies access, reach, electrical interfaces and the completed task.
- Keep useful evidence: Survey, method choice, equipment checks, exclusion check, handback and defect record.
Work at height is any work where a person could fall far enough to be injured if precautions were absent; there is no universal two-metre threshold. A fall through a fragile rooflight, from an edge or into an opening can be fatal even during a short task. Survey, method choice, equipment checks, exclusion check, handback and defect record.
Apply it: What evidence would show that the change improves this task, rather than only completing a record?
Read this part of the full topicOpen the full topicHSE Managing risk using PPE (Great Britain)HSE step-by-step guide (Great Britain regulator guidance)HSE mobile elevating work platforms (Great Britain construction guidance)3. Inspect ageing rooflights without stepping on the roof
Fictional example: a practical application of the existing topic lesson.
- Setting: Inspect ageing rooflights without stepping on a suspect roof.
- Act: Review fragility and whether an internal or MEWP method can reach the task; exclude people below.
- Hold / review: Hold if roof strength, route or protection is uncertain or wind exceeds the equipment limit.
Use the selected protected method; maintain edge and opening protection and monitor weather. Leave barriers until access is closed; record defects and owner for repair.
Apply it: At which point would you hold this example, and what evidence would allow it to proceed?
Read this part of the full topicOpen the full topicHSE GEIS5 fragile roofs (Great Britain regulator guidance)HSE roof work (Great Britain construction guidance)Work at Height Regulations 2005 (Great Britain law)4. How does the work lead to harm? decision table
Connect the task, the route to the person and the control that can fail.
- Fragile rooflight or sheet: The surface gives way and a person falls through into the space below.
- Edge, opening or ladder: A slip or overreach leads to a fall onto a hard or obstructed landing.
- Dropped tool or material: A person below is struck even though the worker above remains protected.
Fragile rooflight or sheet: The surface gives way and a person falls through into the space below. Edge, opening or ladder: A slip or overreach leads to a fall onto a hard or obstructed landing. Dropped tool or material: A person below is struck even though the worker above remains protected.
Apply it: Who could be exposed, including other trades, cleaners, maintainers and people nearby?
Read this part of the full topicOpen the full topicHSE introduction to working at height safely (Great Britain regulator guidance)HSE roof work (Great Britain construction guidance)HSENI working at height (Northern Ireland regulator information)5. Use the work-at-height control sequence
Start with the stronger practicable options and verify their effect.
- Avoid height: Use a suitable ground-level inspection or servicing method.
- Prevent collectively: Provide a suitable guarded platform, edge protection or other collective system.
- Prevent personally: Use designed restraint only where appropriate to the assessed task.
- Minimise a fall: Use suitable collective measures before a justified personal fall-arrest system.
- Verify and rescue: Check equipment, anchors, clearance, weather limits and timely rescue.
The legal sequence remains avoid, prevent, minimise. Collective protection takes priority over personal protection. Restraint prevents reaching a fall position; fall arrest allows a fall and requires suitable clearance and a planned rescue. Neither establishes that an uncertain roof is sound.
Apply it: What proves the selected equipment protects this task and permits the planned rescue?
Read this part of the full topicOpen the full topicHSE Managing risk using PPE (Great Britain)HSE step-by-step guide (Great Britain regulator guidance)HSE mobile elevating work platforms (Great Britain construction guidance)6. Use the full working at height lesson
Follow the official sources below and retain the task-specific evidence.
- Official guidance: Work at Height Regulations 2005
- Official guidance: Work at Height Regulations (Northern Ireland) 2005
- Task decision: Survey, method choice, equipment checks, exclusion check, handback and defect record.
Apply it: Which official source and full-topic section will you use to resolve the next decision?
Read this part of the full topicOpen the full topicWork at Height Regulations 2005 (Great Britain law)Work at Height Regulations (Northern Ireland) 2005 (Northern Ireland law)HSE introduction to working at height safely (Great Britain regulator guidance)
Simplified learning guide. Use the full topic, current official guidance and the actual work arrangements. Workplace scenarios labelled fictional are illustrative examples.
HSE means the Health and Safety Executive for Great Britain; HSENI means the Health and Safety Executive for Northern Ireland. Use the legal and regulator route for the work location.
This can include work above ground, near an opening, or at ground level beside a fragile surface over a void. Assess the actual fall path, not just floor height. Ordinary stairs that form a permanent workplace are not automatically a work-at-height task.
Sources: Work at Height Regulations 2005; Work at Height Regulations (Northern Ireland) 2005; HSE introduction to working at height safely
How can the hierarchy of controls avoid work at height and reduce remaining fall risks?
Avoid work at height where reasonably practicable; otherwise prevent a fall, then minimise its distance and consequences.
Choose equipment for the actual task and conditions, plan rescue and check that collective measures and the work plan remain effective.
ERICPD (Eliminate, Reduce including substitution, Isolate, Control, personal protective equipment (PPE), Discipline) helps organise the control decision alongside HSE’s five-level hierarchy. For work at height, keep the legal sequence of avoiding the work, preventing a fall and then minimising distance and consequences. Collective protection takes priority over personal protection. A lower-level measure needs a recorded task-based reason when a stronger option cannot be used.
How can the ERICPD hierarchy of controls avoid work at height and reduce remaining fall risks?
ERICPD is a planning crossmap. Its prompts do not add a sixth rung or rank Isolate above engineering. Discipline verifies and sustains every control level.
How can the ISO 45001 hierarchy of controls avoid work at height and reduce remaining fall risks?
The hierarchy of controls in ISO 45001:2018 comes under Clause 8.1.2 (Eliminating hazards and reducing OH&S risks), which is located within Clause 8 ("Operation").
ESEAP: Elimination, Substitution, Engineering controls, Administrative controls and PPE. Control order: HSE hierarchy of controls and IOSH hierarchy of control guidance.
Sources: HSE Work at height
Control-map basis: HSE Managing risk using PPE; HSE step-by-step guide; HSE mobile elevating work platforms; HSE roof work; HSE assessing all work at height; Work at Height Regulations 2005; Work at Height Regulations (Northern Ireland) 2005; HSE introduction to working at height safely
Applied case
Loose tools and cartons are stored near a mezzanine edge above a pedestrian route. At handover, someone says that assigning an action owner is enough to restart. Decide what is still needed.
Compare your decision
Name who owns the work, verify implementation and check effectiveness in real conditions. A learning result or request for control does not close an operational action.
Name who owns the work, verify implementation and check effectiveness in real conditions. A learning result or request for control does not close an operational action. Ownership and training support the control but do not demonstrate its effectiveness.
Lesson 5The escape stair is used for storage
Arrange immediate safe restoration of the route and escalate any loss of required escape through the site emergency arrangements.
Read the scene evidence
Returned cartons have been left across part of the mezzanine escape route.
Identify the condition separately from the exposed person and any possible outcome.
How the harm pathway develops
An obstructed emergency route
Returned cartons have been left across part of the mezzanine escape route.
How people can be exposed
People must pass the obstruction during an emergency, possibly with assistance needs.
Possible harm
Delayed escape, falls or exposure to a developing incident.
Compare the work arrangements
Download comparison table (PDF · A4 landscape)
Select controls by how they prevent harm
Immediate protection and longer-term changes have different purposes. Explore each level and check what is feasible for the actual site, task and people.
Use the five-level hierarchy below. Inspection, instruction and supervision sustain every chosen control; they do not replace physical prevention.
Verify, communicate and hand back
Name who owns the work, verify implementation and check effectiveness in real conditions. A learning result or request for control does not close an operational action.
Explain the task-specific evidence, who must act and what restriction remains until it is resolved. A closed action or a course badge cannot establish a live site condition.
What are means of escape and emergency routes?
They are the routes, exits and supporting arrangements that allow people to move from danger to a place of safety quickly and safely.
Best-practice guide · six simple steps
Best-practice guide: Means of escape and emergency routes
Start with the key actions, then explore value, a workplace example, harm, stronger controls and further help. Choose a step or use Previous and Next; the guide does not advance automatically.
Step 1 of 6 · StartThis cardPNG imagePDFView full sizeAll 6 cardsPNG images (ZIP)PDF (6 pages)Keep one card or the full set for social sharing, team briefings and learning. Each PDF contains one card per page. Read the full topic for explanations, questions and source links.
Read all six steps as text
1. What are means of escape and emergency routes?
They are the routes, exits and supporting arrangements that allow people to move from danger to a place of safety quickly and safely.
- Avoid / redesign: Plan storage and works so waste, equipment and ignition sources do not occupy the escape route; examine completing obstructive work while the affected area is unoccupied.
- Control the task: Competent people specify and maintain necessary route protection, doors, lighting and other fire precautions for the actual building and changed layout.
- Verify before release: Walk the whole route and verify safe arrangements before occupation.
They are the routes, exits and supporting arrangements that allow people to move from danger to a place of safety quickly and safely. Means of escape are the routes, exits and supporting arrangements that allow people to reach safety during an emergency.
Apply it: Which part of this plan would you check at the workface before authorising the task?
Read this part of the full topicOpen the full topicHome Office offices and shops fire risk assessment guide (England; method may inform other premises only after local review)HSE hierarchy of controls (Great Britain; apply separate Northern Ireland law where relevant)Home Office means of escape for disabled people (England)2. Turn means of escape and emergency routes knowledge into a decision
Use the evidence to improve the actual work arrangement.
- Change at source: Plan storage and works so waste, equipment and ignition sources do not occupy the escape route; examine completing obstructive work while the affected area is unoccupied.
- Make it observable: Walk the whole route and verify safe arrangements before occupation.
- Keep useful evidence: Temporary route plan and signage.
Means of escape are the routes, exits and supporting arrangements that allow people to reach safety during an emergency. Their design, availability, maintenance and management must fit the premises and the applicable law in England, Wales, Scotland or Northern Ireland. Temporary route plan and signage.
Apply it: What evidence would show that the change improves this task, rather than only completing a record?
Read this part of the full topicOpen the full topicHSE hierarchy of controls (Great Britain; apply separate Northern Ireland law where relevant)Home Office offices and shops fire risk assessment guide (England; method may inform other premises only after local review)Home Office means of escape for disabled people (England)3. Refurbishment escape-route failure scenario
Fictional example: a practical application of the existing topic lesson.
- Hoarding changes route: Temporary route plan and signage.
- Furniture in corridor: Remove storage and inspect daily.
- Fire door propped open: Door control, contractor briefing and supervisor checks.
Hoarding changes route: Temporary route plan and signage. Furniture in corridor: Remove storage and inspect daily.
Apply it: At which point would you hold this example, and what evidence would allow it to proceed?
Read this part of the full topicOpen the full topicHome Office offices and shops fire risk assessment guide (England; method may inform other premises only after local review)4. Where do means of escape fail?
Connect the task, the route to the person and the control that can fail.
- Source / exposure: They fail when route condition, capacity, protection, doors, lighting or people needing help are not managed every day.
- Possible consequence: Escape-route failures are often ordinary and visible: stock in corridors, locked exits, poor signs, doors wedged open, final exits opening into blocked yards, routes through another occupier's space, emergency lights not repaired and staff who have never practised an alternative route.
They fail when route condition, capacity, protection, doors, lighting or people needing help are not managed every day.
Apply it: Who could be exposed, including other trades, cleaners, maintainers and people nearby?
Read this part of the full topicOpen the full topicHome Office offices and shops fire risk assessment guide (England; method may inform other premises only after local review)5. Choose controls for means of escape and emergency routes
Start with the stronger practicable options and verify their effect.
- Eliminate: Plan storage and works so waste, equipment and ignition sources do not occupy the escape route; examine completing obstructive work while the affected area is unoccupied.
- Reduce: Select suitable lower-risk materials or a different work method to reduce the fire or obstruction hazard, while checking other hazards and compatibility.
- Isolate: Competent people specify and maintain necessary route protection, doors, lighting and other fire precautions for the actual building and changed layout.
- Control: Coordinate temporary works, occupancy, routes, signs, communication and individual assistance.
- PPE: Ordinary occupants need usable escape and appropriate assistance, not protective clothing as a substitute for route safety.
Eliminate: Plan storage and works so waste, equipment and ignition sources do not occupy the escape route; examine completing obstructive work while the affected area is unoccupied. Reduce: Select suitable lower-risk materials or a different work method to reduce the fire or obstruction hazard, while checking other hazards and compatibility. Isolate: Competent people specify and maintain necessary route protection, doors, lighting and other fire precautions for the actual building and changed layout. Control: Coordinate temporary works, occupancy, routes, signs, communication and individual assistance. PPE: Ordinary occupants need usable escape and appropriate assistance, not protective clothing as a substitute for route safety. Read the full control table for qualifications, ownership and verification. Use the actual task and applicable jurisdiction; existing technical approval remains unchanged.
Apply it: Which stronger option can be used here, and who will verify it before accepting the remaining risk?
Read this part of the full topicOpen the full topicHSE hierarchy of controls (Great Britain; apply separate Northern Ireland law where relevant)Home Office offices and shops fire risk assessment guide (England; method may inform other premises only after local review)Home Office means of escape for disabled people (England)6. Use the full means of escape and emergency routes lesson
Follow the official sources below and retain the task-specific evidence.
- Official guidance: Home Office offices and shops fire risk assessment guide
- Official guidance: HSE hierarchy of controls
- Task decision: Temporary route plan and signage.
Apply it: Which official source and full-topic section will you use to resolve the next decision?
Read this part of the full topicOpen the full topicHome Office offices and shops fire risk assessment guide (England; method may inform other premises only after local review)HSE hierarchy of controls (Great Britain; apply separate Northern Ireland law where relevant)Home Office means of escape for disabled people (England)
Simplified learning guide. Use the full topic, current official guidance and the actual work arrangements. Workplace scenarios labelled fictional are illustrative examples.
A Personal Emergency Evacuation Plan (PEEP) sets out the people, equipment, communication and route needed for someone who requires assisted escape. A fire risk assessment (FRA) must check whether those arrangements work in the actual building and occupancy. Personal protective equipment (PPE) cannot compensate for an unusable escape route.
A means of escape is more than a marked exit. It includes the route people take, the doors they pass through, the protection from fire and smoke, lighting, signs, alarms, assisted evacuation arrangements, final exit discharge, assembly arrangements and management controls that keep the route available. Sources: Home Office offices and shops fire risk assessment guide; Scottish Government existing non-residential fire safety guidance
GOV.UK fire guidance expects clear passageways to escape routes, routes that are short and direct, enough exits and routes for the people present, emergency doors that open easily, emergency lighting where needed, staff training and a safe meeting point. Sources: Home Office offices and shops fire risk assessment guide; Scottish Government existing non-residential fire safety guidance
Good escape-route management is continuous. A route that was suitable at assessment can become unsafe because of stock, waste, contractor work, changed occupancy, locked doors, damaged lighting, fire doors wedged open, temporary hoardings, events, poor housekeeping or people who now need assistance. Sources: Home Office offices and shops fire risk assessment guide; Scottish Government existing non-residential fire safety guidance
How should means of escape be assured?
Assurance should test whether people can actually reach safety using the routes available during normal and abnormal conditions.
First-line assurance includes daily or shift route checks, supervisor observations and warden reports. Second-line assurance reviews drills, fire-door defects, emergency-lighting tests, route changes and assisted-escape arrangements. Specialist assurance may involve competent fire risk assessors or fire engineers for complex premises. Sources: Home Office offices and shops fire risk assessment guide; Scottish Government existing non-residential fire safety guidance
A useful assurance test is to walk the route during a busy period and ask whether a visitor unfamiliar with the building could find and use it without delay. Sources: Home Office offices and shops fire risk assessment guide; Scottish Government existing non-residential fire safety guidance
Applied case
Returned cartons have been left across part of the mezzanine escape route. At handover, someone says that assigning an action owner is enough to restart. Decide what is still needed.
Compare your decision
Name who owns the work, verify implementation and check effectiveness in real conditions. A learning result or request for control does not close an operational action.
Name who owns the work, verify implementation and check effectiveness in real conditions. A learning result or request for control does not close an operational action. Ownership and training support the control but do not demonstrate its effectiveness.
Lesson 6A quick roof inspection crosses fragile material
Do not access the roof. Arrange a competent assessment of a safer inspection method, access, protection and rescue.
Read the scene evidence
A leak inspection is proposed from a roof-access point without a confirmed safe route or rescue plan.
Identify the condition separately from the exposed person and any possible outcome.
How the harm pathway develops
Fragile roof surfaces or rooflights on an unplanned access route
A leak inspection is proposed from a roof-access point without a confirmed safe route or rescue plan.
How people can be exposed
A person steps onto a surface that cannot support them or approaches an unprotected edge.
Possible harm
A fall through or from the roof and possible falling objects.
Compare the work arrangements
Download comparison table (PDF · A4 landscape)
Select controls by how they prevent harm
Immediate protection and longer-term changes have different purposes. Explore each level and check what is feasible for the actual site, task and people.
Use the five-level hierarchy below. Inspection, instruction and supervision sustain every chosen control; they do not replace physical prevention.
Verify, communicate and hand back
Name who owns the work, verify implementation and check effectiveness in real conditions. A learning result or request for control does not close an operational action.
Explain the task-specific evidence, who must act and what restriction remains until it is resolved. A closed action or a course badge cannot establish a live site condition.
What counts as work at height?
It is work in any place where a person could fall a distance liable to cause personal injury if precautions were absent; there is no universal two-metre trigger.
Best-practice guide · six simple steps
Best-practice guide: Working at Height
Start with the key actions, then explore value, a workplace example, harm, stronger controls and further help. Choose a step or use Previous and Next; the guide does not advance automatically.
Step 1 of 6 · StartThis cardPNG imagePDFView full sizeAll 6 cardsPNG images (ZIP)PDF (6 pages)Keep one card or the full set for social sharing, team briefings and learning. Each PDF contains one card per page. Read the full topic for explanations, questions and source links.
Read all six steps as text
1. Avoid height, then prevent the remaining fall
Use the actual task, structure and conditions to choose the method.
- Avoid: Complete the task from ground level where reasonably practicable.
- Prevent: Use a suitable safe place or collective fall prevention where work at height remains.
- Minimise: Plan the distance, consequences and rescue for a remaining fall risk.
Keep the work-at-height sequence: avoid the work where reasonably practicable, prevent falls, then minimise the distance and consequences of a remaining fall. Choose collective protection before personal protection at each level. A short task or a fall below two metres can still cause severe injury.
Apply it: Can the task be completed without approaching a fragile surface, opening or unprotected edge?
Read this part of the full topicOpen the full topicWork at Height Regulations 2005 (Great Britain law)Work at Height Regulations (Northern Ireland) 2005 (Northern Ireland law)HSE introduction to working at height safely (Great Britain regulator guidance)2. Turn working at height knowledge into a decision
Use the evidence to improve the actual work arrangement.
- Change at source: Lower a lighting mast for servicing or inspect from a suitable ground-level method so the worker does not need to reach an edge or fragile surface.
- Make it observable: Facilities or design owner verifies access, reach, electrical interfaces and the completed task.
- Keep useful evidence: Survey, method choice, equipment checks, exclusion check, handback and defect record.
Work at height is any work where a person could fall far enough to be injured if precautions were absent; there is no universal two-metre threshold. A fall through a fragile rooflight, from an edge or into an opening can be fatal even during a short task. Survey, method choice, equipment checks, exclusion check, handback and defect record.
Apply it: What evidence would show that the change improves this task, rather than only completing a record?
Read this part of the full topicOpen the full topicHSE Managing risk using PPE (Great Britain)HSE step-by-step guide (Great Britain regulator guidance)HSE mobile elevating work platforms (Great Britain construction guidance)3. Inspect ageing rooflights without stepping on the roof
Fictional example: a practical application of the existing topic lesson.
- Setting: Inspect ageing rooflights without stepping on a suspect roof.
- Act: Review fragility and whether an internal or MEWP method can reach the task; exclude people below.
- Hold / review: Hold if roof strength, route or protection is uncertain or wind exceeds the equipment limit.
Use the selected protected method; maintain edge and opening protection and monitor weather. Leave barriers until access is closed; record defects and owner for repair.
Apply it: At which point would you hold this example, and what evidence would allow it to proceed?
Read this part of the full topicOpen the full topicHSE GEIS5 fragile roofs (Great Britain regulator guidance)HSE roof work (Great Britain construction guidance)Work at Height Regulations 2005 (Great Britain law)4. How does the work lead to harm? decision table
Connect the task, the route to the person and the control that can fail.
- Fragile rooflight or sheet: The surface gives way and a person falls through into the space below.
- Edge, opening or ladder: A slip or overreach leads to a fall onto a hard or obstructed landing.
- Dropped tool or material: A person below is struck even though the worker above remains protected.
Fragile rooflight or sheet: The surface gives way and a person falls through into the space below. Edge, opening or ladder: A slip or overreach leads to a fall onto a hard or obstructed landing. Dropped tool or material: A person below is struck even though the worker above remains protected.
Apply it: Who could be exposed, including other trades, cleaners, maintainers and people nearby?
Read this part of the full topicOpen the full topicHSE introduction to working at height safely (Great Britain regulator guidance)HSE roof work (Great Britain construction guidance)HSENI working at height (Northern Ireland regulator information)5. Use the work-at-height control sequence
Start with the stronger practicable options and verify their effect.
- Avoid height: Use a suitable ground-level inspection or servicing method.
- Prevent collectively: Provide a suitable guarded platform, edge protection or other collective system.
- Prevent personally: Use designed restraint only where appropriate to the assessed task.
- Minimise a fall: Use suitable collective measures before a justified personal fall-arrest system.
- Verify and rescue: Check equipment, anchors, clearance, weather limits and timely rescue.
The legal sequence remains avoid, prevent, minimise. Collective protection takes priority over personal protection. Restraint prevents reaching a fall position; fall arrest allows a fall and requires suitable clearance and a planned rescue. Neither establishes that an uncertain roof is sound.
Apply it: What proves the selected equipment protects this task and permits the planned rescue?
Read this part of the full topicOpen the full topicHSE Managing risk using PPE (Great Britain)HSE step-by-step guide (Great Britain regulator guidance)HSE mobile elevating work platforms (Great Britain construction guidance)6. Use the full working at height lesson
Follow the official sources below and retain the task-specific evidence.
- Official guidance: Work at Height Regulations 2005
- Official guidance: Work at Height Regulations (Northern Ireland) 2005
- Task decision: Survey, method choice, equipment checks, exclusion check, handback and defect record.
Apply it: Which official source and full-topic section will you use to resolve the next decision?
Read this part of the full topicOpen the full topicWork at Height Regulations 2005 (Great Britain law)Work at Height Regulations (Northern Ireland) 2005 (Northern Ireland law)HSE introduction to working at height safely (Great Britain regulator guidance)
Simplified learning guide. Use the full topic, current official guidance and the actual work arrangements. Workplace scenarios labelled fictional are illustrative examples.
HSE means the Health and Safety Executive for Great Britain; HSENI means the Health and Safety Executive for Northern Ireland. Use the legal and regulator route for the work location.
This can include work above ground, near an opening, or at ground level beside a fragile surface over a void. Assess the actual fall path, not just floor height. Ordinary stairs that form a permanent workplace are not automatically a work-at-height task.
Sources: Work at Height Regulations 2005; Work at Height Regulations (Northern Ireland) 2005; HSE introduction to working at height safely
How can the hierarchy of controls avoid work at height and reduce remaining fall risks?
Avoid work at height where reasonably practicable; otherwise prevent a fall, then minimise its distance and consequences.
Choose equipment for the actual task and conditions, plan rescue and check that collective measures and the work plan remain effective.
ERICPD (Eliminate, Reduce including substitution, Isolate, Control, personal protective equipment (PPE), Discipline) helps organise the control decision alongside HSE’s five-level hierarchy. For work at height, keep the legal sequence of avoiding the work, preventing a fall and then minimising distance and consequences. Collective protection takes priority over personal protection. A lower-level measure needs a recorded task-based reason when a stronger option cannot be used.
How can the ERICPD hierarchy of controls avoid work at height and reduce remaining fall risks?
ERICPD is a planning crossmap. Its prompts do not add a sixth rung or rank Isolate above engineering. Discipline verifies and sustains every control level.
How can the ISO 45001 hierarchy of controls avoid work at height and reduce remaining fall risks?
The hierarchy of controls in ISO 45001:2018 comes under Clause 8.1.2 (Eliminating hazards and reducing OH&S risks), which is located within Clause 8 ("Operation").
ESEAP: Elimination, Substitution, Engineering controls, Administrative controls and PPE. Control order: HSE hierarchy of controls and IOSH hierarchy of control guidance.
Sources: HSE Work at height
Control-map basis: HSE Managing risk using PPE; HSE step-by-step guide; HSE mobile elevating work platforms; HSE roof work; HSE assessing all work at height; Work at Height Regulations 2005; Work at Height Regulations (Northern Ireland) 2005; HSE introduction to working at height safely
Applied case
A leak inspection is proposed from a roof-access point without a confirmed safe route or rescue plan. At handover, someone says that assigning an action owner is enough to restart. Decide what is still needed.
Compare your decision
Name who owns the work, verify implementation and check effectiveness in real conditions. A learning result or request for control does not close an operational action.
Name who owns the work, verify implementation and check effectiveness in real conditions. A learning result or request for control does not close an operational action. Ownership and training support the control but do not demonstrate its effectiveness.
Lesson 7A fire door is wedged open for stock movement
Stop the stock-movement practice and notify the responsible premises lead. Remove an ordinary wedge only if safe and authorised, check that the door closes correctly, and escalate any closing defect or impaired escape arrangement.
Read the scene evidence
A door to the protected stair is wedged open to move cartons. Staff assume the alarm will compensate, but the door cannot perform its intended separation function.
Identify the condition separately from the exposed person and any possible outcome.
How the harm pathway develops
A wedge defeats a fire door that protects the escape route.
A door to the protected stair is wedged open to move cartons. Staff assume the alarm will compensate, but the door cannot perform its intended separation function.
How people can be exposed
Smoke or heat may pass through the defeated boundary into an escape route used by other occupants.
Possible harm
An escape route could become unsafe before people have left the building.
Compare the work arrangements
Download comparison table (PDF · A4 landscape)
Select controls by how they prevent harm
Immediate protection and longer-term changes have different purposes. Explore each level and check what is feasible for the actual site, task and people.
Use the five-level hierarchy below. Inspection, instruction and supervision sustain every chosen control; they do not replace physical prevention.
Verify, communicate and hand back
Name who owns the work, verify implementation and check effectiveness in real conditions. A learning result or request for control does not close an operational action.
Explain the task-specific evidence, who must act and what restriction remains until it is resolved. A closed action or a course badge cannot establish a live site condition.
What should people check and report?
Check that the intended barrier is present, undamaged and usable, and report a defect before relying on it. Ordinary observation identifies concerns; it does not certify hidden fire resistance or authorise a repair. Sources: HSE explains passive protection performance and deterioration; NIFRS guidance.
The following prompts help a worker or supervisor recognise a change that needs action. Use the approved site design and inspection criteria for the actual system. Do not disturb unknown coatings, insulation or concealed construction simply to investigate; arrange a safe survey, including asbestos information where relevant.
Inspection intervals and defect priorities should follow the risk, specific legal requirements for the premises, manufacturer instructions and competent assessment. There is no single weekly or annual interval for everything on this page. Recheck after damage, alterations, severe weather or other events that could affect the barrier.
What does passive fire protection do?
Passive fire protection uses the building fabric, protective systems and separation to limit fire effects. It can delay heat damage, restrict fire or smoke spread and protect escape or critical plant, but it works only within its design conditions.
Best-practice guide · six simple steps
Best-practice guide: Passive Fire Protection, Layout and Separation
Start with the key actions, then explore value, a workplace example, harm, stronger controls and further help. Choose a step or use Previous and Next; the guide does not advance automatically.
Step 1 of 6 · StartThis cardPNG imagePDFView full sizeAll 6 cardsPNG images (ZIP)PDF (6 pages)Keep one card or the full set for social sharing, team briefings and learning. Each PDF contains one card per page. Read the full topic for explanations, questions and source links.
Read all six steps as text
1. What does passive fire protection do?
Passive fire protection uses the building fabric, protective systems and separation to limit fire effects.
- Avoid / redesign: Avoid the new compartment breach or unnecessary occupied cabin; where feasible remove the flammable inventory or ignition-producing task.
- Control the task: Separate occupied areas from credible effects and maintain complete compartment walls, doors and protected routes.
- Verify before release: Approved alternative route or location and change record.
Passive fire protection uses the building fabric, protective systems and separation to limit fire effects. It can delay heat damage, restrict fire or smoke spread and protect escape or critical plant, but it works only within its design conditions. Passive fire protection uses fire-resisting construction, protective systems and plant separation to slow the spread of heat and smoke and limit escalation.
Apply it: Which part of this plan would you check at the workface before authorising the task?
Read this part of the full topicOpen the full topicHSE explains passive protection performance and deterioration (Great Britain)HSE sets out the GB DSEAR control priorities (Great Britain)HSG176 (Great Britain)2. Turn passive fire protection, layout and separation knowledge into a decision
Use the evidence to improve the actual work arrangement.
- Change at source: Avoid the new compartment breach or unnecessary occupied cabin; where feasible remove the flammable inventory or ignition-producing task.
- Make it observable: Approved alternative route or location and change record.
- Keep useful evidence: Keep the location and penetration ID, design/system evidence, product identification, installer record, before-and-after photographs, inspection and acceptance, updated drawing and closure of the impairment.
Passive fire protection uses fire-resisting construction, protective systems and plant separation to slow the spread of heat and smoke and limit escalation. Its performance depends on complete compartments, suitable fireproofing, drainage and layouts matched to credible fire and explosion scenarios. Keep the location and penetration ID, design/system evidence, product identification, installer record, before-and-after photographs, inspection and acceptance, updated drawing and closure of the impairment.
Apply it: What evidence would show that the change improves this task, rather than only completing a record?
Read this part of the full topicOpen the full topicHSE sets out the GB DSEAR control priorities (Great Britain)HSG176 (Great Britain)HSE plant-layout guidance (Great Britain)3. Example one Restoring a warehouse compartment
Fictional example: a practical application of the existing topic lesson.
- Setting: Install a data cable through a warehouse compartment wall beside an occupied office and protected corridor.
- Act: Consider a route that avoids a new breach.
- Hold / review: Stop on unknown wall construction or material, unexpected services, unsupported product substitution, damage to the boundary or loss of the agreed route.
Keep the opening and work area within the assessed scope. Maintain escape routes, control waste and ignition sources, and record the installed system before it becomes hidden. The competent person checks the installation against the approved specification before concealment.
Apply it: At which point would you hold this example, and what evidence would allow it to proceed?
Read this part of the full topicOpen the full topicHSE explains passive protection performance and deterioration (Great Britain)4. A breach lets fire and smoke cross the boundary
Connect the task, the route to the person and the control that can fail.
- Defect: A propped door or unsealed penetration interrupts the intended separation.
- Spread: Smoke, heat or flame can reach another compartment or escape route.
- People: Occupants may be exposed before evacuation or protection arrangements can work.
A propped door or unsealed penetration interrupts the intended separation. Smoke, heat or flame can reach another compartment or escape route. Occupants may be exposed before evacuation or protection arrangements can work. Use the full topic for the detailed mechanism, task limits and source scope.
Apply it: Where is this harm route present in the actual work, and which control breaks it before anyone is exposed?
Read this part of the full topicOpen the full topicHSE explains passive protection performance and deterioration (Great Britain)5. Choose controls for passive fire protection, layout and separation
Start with the stronger practicable options and verify their effect.
- Eliminate: Avoid the new compartment breach or unnecessary occupied cabin; where feasible remove the flammable inventory or ignition-producing task.
- Reduce or substitute: Use a less hazardous substance or process, or reduce stored inventory where technically feasible; review compatibility and any new hazard.
- Isolate: Separate occupied areas from credible effects and maintain complete compartment walls, doors and protected routes.
- Control — physical and engineered: Specify compatible fire-stopping, protected supports, drainage and, where required, detection or automatic isolation.
- Control — administrative: Coordinate alterations, fire-risk and dangerous-substance assessments, impairment restrictions, inspection and handback.
Eliminate: Avoid the new compartment breach or unnecessary occupied cabin; where feasible remove the flammable inventory or ignition-producing task. Reduce or substitute: Use a less hazardous substance or process, or reduce stored inventory where technically feasible; review compatibility and any new hazard. Isolate: Separate occupied areas from credible effects and maintain complete compartment walls, doors and protected routes. Control — physical and engineered: Specify compatible fire-stopping, protected supports, drainage and, where required, detection or automatic isolation. Control — administrative: Coordinate alterations, fire-risk and dangerous-substance assessments, impairment restrictions, inspection and handback. Read the full control table for qualifications, ownership and verification. Use the actual task and applicable jurisdiction; existing technical approval remains unchanged.
Apply it: Which stronger option can be used here, and who will verify it before accepting the remaining risk?
Read this part of the full topicOpen the full topicHSE sets out the GB DSEAR control priorities (Great Britain)HSG176 (Great Britain)HSE plant-layout guidance (Great Britain)6. Use the full passive fire protection, layout and separation lesson
Follow the official sources below and retain the task-specific evidence.
- Official guidance: HSE explains passive protection performance and deterioration
- Official guidance: HSE sets out the GB DSEAR control priorities
- Task decision: Keep the location and penetration ID, design/system evidence, product identification, installer record, before-and-after photographs, inspection and acceptance, updated drawing and closure of the impairment.
Apply it: Which official source and full-topic section will you use to resolve the next decision?
Read this part of the full topicOpen the full topicHSE explains passive protection performance and deterioration (Great Britain)HSE sets out the GB DSEAR control priorities (Great Britain)HSG176 (Great Britain)
Simplified learning guide. Use the full topic, current official guidance and the actual work arrangements. Workplace scenarios labelled fictional are illustrative examples.
A compartment is a space enclosed by fire-resisting construction. Its walls, floors, doors, junctions and service openings must work together. A sound wall with an unsealed cable hole above a ceiling can still let fire or smoke bypass the intended boundary. A protective coating may slow heating of a steel support, but damage or unsuitable installation can leave the support vulnerable.
Passive measures do not normally need a powered pump or a person to start them. That does not mean nothing moves or changes: a fire door must close, and intumescent materials expand when heated. Alarms, sprinklers and deluge are active systems with different functions. Neither group automatically compensates for failure of the other.
On process sites, layout, separation, drainage and protection of occupied buildings also interrupt escalation: one release or fire must not readily defeat neighbouring equipment or the systems needed to control it. HSE explains passive protection performance and deterioration.
Applied case
A door to the protected stair is wedged open to move cartons. Staff assume the alarm will compensate, but the door cannot perform its intended separation function. At handover, someone says that assigning an action owner is enough to restart. Decide what is still needed.
Compare your decision
Name who owns the work, verify implementation and check effectiveness in real conditions. A learning result or request for control does not close an operational action.
Name who owns the work, verify implementation and check effectiveness in real conditions. A learning result or request for control does not close an operational action. Ownership and training support the control but do not demonstrate its effectiveness.
Lesson 8Shift handover: connect the hazards
Defend the stopping condition and the evidence needed for release.
Reconstruct the whole task
Stock is being moved on a mezzanine. An open edge, objects near the boundary, a blocked escape route and a wedged fire door are treated as separate small problems.
The stored goods have moved, but the edge barrier is still open and the fire door remains wedged to make the next delivery easier.
Maintain restrictions, restore the required physical protection and door function, and verify the actual route before resuming the arrangement.
Build an evidence-led handover
Use the documents as working tools
Map the task, people, exposure pathway, existing controls, missing evidence and review trigger. Use the fictional course case.
Prepare a five-minute task briefing. Ask a scenario question and check understanding, rather than relying on an attendance signature.
Find who owns the control, who can authorise release and how a worker escalates a defect. Check the actual local arrangements.
Compare a claim with an observation, a relevant record and a competent explanation. Record open actions and verify closure.
What should people check and report?
Check that the intended barrier is present, undamaged and usable, and report a defect before relying on it. Ordinary observation identifies concerns; it does not certify hidden fire resistance or authorise a repair. Sources: HSE explains passive protection performance and deterioration; NIFRS guidance.
The following prompts help a worker or supervisor recognise a change that needs action. Use the approved site design and inspection criteria for the actual system. Do not disturb unknown coatings, insulation or concealed construction simply to investigate; arrange a safe survey, including asbestos information where relevant.
Inspection intervals and defect priorities should follow the risk, specific legal requirements for the premises, manufacturer instructions and competent assessment. There is no single weekly or annual interval for everything on this page. Recheck after damage, alterations, severe weather or other events that could affect the barrier.
Applied case
The stored goods have moved, but the edge barrier is still open and the fire door remains wedged to make the next delivery easier.
Compare your decision
Maintain restrictions, restore the required physical protection and door function, and verify the actual route before resuming the arrangement.
Maintain restrictions, restore the required physical protection and door function, and verify the actual route before resuming the arrangement.
Lesson 9Your workplace transfer challenge
Turn one lesson into a bounded check with an owner and a review trigger.
Prepare a useful task briefing
Keep access, storage and fire precautions effective.
Use the printable course workbook to describe one fictional task. State who could be exposed, the harmful mechanism, a higher-level control, the immediate restriction and the evidence needed to close the action.
Test understanding and inspect the arrangement
Verify physical protection and clear routes after changes or deliveries.
Ask the team what they would do if the control failed. Compare their answer with the actual arrangements and the source teaching. Check both what people understand and whether the physical control works.
Keep learning and operational authority clear
Independent warehouse awareness and decision practice for a GB baseline; check corresponding Northern Ireland duties and site arrangements. Completion is not practical competence, a licence or authority for specialist work.
The workbook is a practice document. Use the authorised workplace system for real risk assessments, permits, defect reports and audits. Video demonstrations can be added later; no missing video is required to complete this course.
Applied case
You are asked to prepare a toolbox talk and a check for the next shift. The current document says only: be more careful.
Compare your decision
Identify the task, responsible role, required evidence, restriction and trigger for review.
A useful action connects the work to its owner, evidence and a clear decision boundary.