Optional presentation practice. Choices and model launches do not write LMS grades, completion or certificates. This extension takes additional learning time.
1. Machinery guarding and interlocks Prevent access to danger and understand what an interlock does not prove.
2. Choose a learning route 3. Find every route to dangerous parts Find every route to dangerous parts.
Machinery can entangle, draw in, crush, cut or strike a person. A guard should prevent reaching dangerous parts through, over, under or around it, not simply cover the most visible side.
Machinery can entangle, draw in, crush, cut or strike a person. A guard should prevent reaching dangerous parts through, over, under or around it, not simply cover the most visible side. Access during cleaning, adjustment and jam response matters as much as the normal operator position. Ejected material and linked equipment can create additional pathways. An incident-free period does not demonstrate that a reachable hazard is controlled.
Observe the actual task without approaching or challenging the danger. Report missing panels, loose fixings, new openings or changes that could invalidate the access assessment. Include cleaners, maintainers and other people with different reach or access needs. Engineering dimensions and safe distances require the competent machine-specific basis; a course photograph cannot establish whether a particular gap is acceptable.
4. The fictional case and decision boundary Find every route to dangerous parts.
Task and setting A packaging conveyor stops when its gate opens, but dangerous motion remains reachable and operators have started resetting nuisance trips. Cleaning and restart arrangements need review. Decision to practise Cleaning is awkward behind a fixed cover, so workers remove it for production and keep a warning sign nearby. The proposed improvement is another briefing with no access redesign. Evidence to consider Reduce entry and choose effective safeguarding.
5. Decision 1: interpret the evidence Cleaning is awkward behind a fixed cover, so workers remove it for production and keep a warning sign nearby. The proposed improvement is another briefing with no access redesign.
Which action addresses the stronger control need?
Accept the sign as an equivalent cover. Keep the cover off whenever production is busy. Review the task and provide effective usable physical safeguarding. (supported response) Usable design and effective separation need resolution; instruction cannot make the open hazard equivalent to a suitable guard.
6. Reconsider the evidence Which action addresses the stronger control need?
Accept the sign as an equivalent cover. Keep the cover off whenever production is busy. Review the task and provide effective usable physical safeguarding. (supported response) Usable design and effective separation need resolution; instruction cannot make the open hazard equivalent to a suitable guard.
7. Decision 1 explained Usable design and effective separation need resolution; instruction cannot make the open hazard equivalent to a suitable guard.
Reduce entry and choose effective safeguarding.
8. Reduce entry and choose effective safeguarding Reduce entry and choose effective safeguarding.
Reduce the need for dangerous access by correcting jam causes and designing suitable feed, adjustment and cleaning arrangements. Prevent access using suitable fixed guarding where practicable. Where necessary access needs a different arrangement, competent selection may include an interlocked guard or other protective device.
Reduce the need for dangerous access by correcting jam causes and designing suitable feed, adjustment and cleaning arrangements. Prevent access using suitable fixed guarding where practicable. Where necessary access needs a different arrangement, competent selection may include an interlocked guard or other protective device. Tools, information and supervision support the chosen system; an emergency stop or warning sign is not equivalent to practicable physical protection.
The safeguard must suit the access frequency, foreseeable misuse and hazard behaviour. If workers remove protection because visibility or cleaning is difficult, investigate that work-system failure. Do not solve production inconvenience by defeating the device. A competent review should provide a usable protected method rather than rely on people working carefully beside dangerous movement or repeatedly tolerating nuisance trips.
9. Match the function Match each card to its meaning. Drag, or use the labelled category selector.
Match each card to its meaning. Drag, or use the labelled category selector.
Prevents reaching the dangerous part. — Physical guard. Assess all credible access routes. Links opening access to prevention or stopping of danger. — Interlocked access. The whole function matters. Controls relevant energy for the intrusive work. — Intervention isolation. A normal stop alone may not provide this. 10. Compare the reasoning: Match the function Prevents reaching the dangerous part. Physical guard Links opening access to prevention or stopping of danger. Interlocked access Controls relevant energy for the intrusive work. Intervention isolation
Match each card to its meaning. Drag, or use the labelled category selector.
Prevents reaching the dangerous part. — Physical guard. Assess all credible access routes. Links opening access to prevention or stopping of danger. — Interlocked access. The whole function matters. Controls relevant energy for the intrusive work. — Intervention isolation. A normal stop alone may not provide this. 11. Understand the complete safety function Understand the complete safety function.
An interlocked guard connects access to a protective function so dangerous operation is prevented or stopped when access opens. The protection must act before a person can reach the danger.
An interlocked guard connects access to a protective function so dangerous operation is prevented or stopped when access opens. The protection must act before a person can reach the danger. If movement takes time to cease, the competent design must prevent access during that dangerous period. Closing a guard should not itself restart the machine. A door-position switch alone does not establish these behaviours.
The function can depend on the sensor, wiring, control system, output devices, drive, brake and mechanical stopping performance. Some arrangements need guard locking or means to prevent a person being trapped. Requirements depend on the actual machine and risk. Users recognise and report a concern; they should not defeat a switch or reach inside to discover whether the system reacts quickly enough.
Open the related fictional model case
12. Decision 2: choose the response A cleaner opens an interlocked gate and prepares to reach into the machine. Pressure and an upstream feed remain outside the work plan, although the main drive has stopped.
What is required before the intervention?
A complete authorised safe system covering relevant energy, feed and verification. (supported response) The open gate as proof that all sources are isolated. A colleague watching the start button. Guard operation does not establish the isolation needed for intrusive work.
13. Compare the consequences What is required before the intervention?
A complete authorised safe system covering relevant energy, feed and verification. (supported response) The open gate as proof that all sources are isolated. A colleague watching the start button. Guard operation does not establish the isolation needed for intrusive work.
14. Decision 2 explained Guard operation does not establish the isolation needed for intrusive work.
Do not confuse guarded access with isolation.
15. Do not confuse guarded access with isolation Do not confuse guarded access with isolation.
Cleaning, adjustment or repair can require a different safe system from normal operation. An interlock or emergency stop may leave electrical supply, pressure, gravity, coasting parts or linked equipment available.
Cleaning, adjustment or repair can require a different safe system from normal operation. An interlock or emergency stop may leave electrical supply, pressure, gravity, coasting parts or linked equipment available. The authorised intervention plan must identify the actual boundary and relevant stored energy, protect everyone involved and verify the required safe condition. A normal stop is not automatically an isolation, even if no movement is visible.
Keep the work outside the danger until that plan is established and implemented by the competent authorised roles. Do not reach into a blockage because the gate is open or ask another person to hold a button. Where movement is genuinely needed during work, a separately engineered and authorised arrangement is required. An awareness course cannot specify that mode or provide a universal lockout sequence.
16. Plan a safeguard concern response Arrange the steps for this case. Drag, or use Move up and Move down.
Arrange the steps for this case. Drag, or use Move up and Move down.
Stop the affected unsafe use and keep people clear. Report the machine, fault and immediate restriction. Obtain competent repair and safe functional verification. Complete authorised handback and communicate the accepted method. This is a reporting and acceptance route, not a procedure for reaching into or testing a machine.
17. Compare the reasoning: Plan a safeguard concern response 1 Stop the affected unsafe use and keep people clear. 2 Report the machine, fault and immediate restriction. 3 Obtain competent repair and safe functional verification. 4 Complete authorised handback and communicate the accepted method.
Arrange the steps for this case. Drag, or use Move up and Move down.
Stop the affected unsafe use and keep people clear. Report the machine, fault and immediate restriction. Obtain competent repair and safe functional verification. Complete authorised handback and communicate the accepted method. This is a reporting and acceptance route, not a procedure for reaching into or testing a machine.
18. Stop defeat and report the actual fault Stop defeat and report the actual fault.
Stop and keep the affected machine out of use when a required guard is missing, dangerous movement is reachable or an interlock is defeated or ineffective. Tell the supervisor and keep others clear through the site arrangements.
Stop and keep the affected machine out of use when a required guard is missing, dangerous movement is reachable or an interlock is defeated or ineffective. Tell the supervisor and keep others clear through the site arrangements. A designed movable guard can open during intended safe access, but the hazardous condition must remain prevented. The concern is the protective function, not a rule that every open door is automatically defective.
Do not use spare actuators, magnets, wedges or repeated resets to keep production running. A useful report identifies the machine, affected safeguard, observed condition, exposed people and immediate restriction. Competent people assess, repair and verify the function safely. Investigate the reason for bypassing, including work access and production pressure, so the defect does not return after a warning or temporary fix.
Open the related fictional model case
19. Decision 3: apply and review A switch has been replaced and the work order is closed, but stopping behaviour and restart prevention have not been verified. The team asks to resume because the new switch lights correctly.
What supports return to service?
A completed invoice as automatic release. Competent verification of the complete protective function and authorised handback. (supported response) The switch light alone. The replacement component must work within the complete safety function; its indicator does not prove that function.
20. Revisit the control or support boundary What supports return to service?
A completed invoice as automatic release. Competent verification of the complete protective function and authorised handback. (supported response) The switch light alone. The replacement component must work within the complete safety function; its indicator does not prove that function.
21. Decision 3 explained The replacement component must work within the complete safety function; its indicator does not prove that function.
Accept the restored function, not only the repair entry.
22. Accept the restored function, not only the repair entry Accept the restored function, not only the repair entry.
Handback needs evidence that the required safeguard works on the actual machine, with competent testing and acceptance appropriate to the risk. The check should address the specified access, stopping and restart behaviour and any changed method.
Handback needs evidence that the required safeguard works on the actual machine, with competent testing and acceptance appropriate to the risk. The check should address the specified access, stopping and restart behaviour and any changed method. Do not invent a universal test interval or engineering performance value. A modification or reported fault can require review before further use even when a routine inspection date has not arrived.
Account for people and tools, restore guards and protective arrangements, and communicate the accepted condition to the machine owner and users. A service invoice or completed work order is not the same as functional verification. Use a planned safe test method that prevents exposure; never challenge a guard with a person. Keep restrictions open until the responsible authorised handback is complete.
23. Choose handback evidence Choose every supported action. Leave the unsuitable actions unselected.
Choose every supported action. Leave the unsuitable actions unselected.
The complete access, stopping and restart function is verified. — Supported action. Match the actual protective specification. Changed instructions reach the users and machine owner. — Supported action. The restored method must be usable. A new switch indicator replaces all functional checks. — Leave unselected. One component does not prove the chain. An operator reaches in to test the stop. — Leave unselected. Testing must prevent exposure. 24. Compare the reasoning: Choose handback evidence The complete access, stopping and restart function is verified. Supported action Changed instructions reach the users and machine owner. Supported action A new switch indicator replaces all functional checks. Leave unselected An operator reaches in to test the stop. Leave unselected
Choose every supported action. Leave the unsuitable actions unselected.
The complete access, stopping and restart function is verified. — Supported action. Match the actual protective specification. Changed instructions reach the users and machine owner. — Supported action. The restored method must be usable. A new switch indicator replaces all functional checks. — Leave unselected. One component does not prove the chain. An operator reaches in to test the stop. — Leave unselected. Testing must prevent exposure. 25. Apply the lesson in a fictional workplace The model shows a guard and connected extraction. For the next cut, the operator proposes lifting the guard and disconnecting the hose because they obstruct the work.
Accept the restored function, not only the repair entry.
Open the related fictional model case
26. Take the learning into a fictional task Accept the restored function, not only the repair entry.
Task and people A packaging conveyor stops when its gate opens, but dangerous motion remains reachable and operators have started resetting nuisance trips. Cleaning and restart arrangements need review. Control or support Do not confuse guarded access with isolation. Check and review Accept the restored function, not only the repair entry.
27. Explain your reasoning without the answer sheet Use the supplied case facts. Explain why a choice fits the task and what remains uncertain. A points total or completed form cannot replace the required control or support arrangement.
28. Continue with the full course and Knowledge Hub Use the original course for its six lessons, required activities, final assessment and saved record. This optional companion does not change course grades, completion or certificates.
Enable JavaScript for interactive practice, or use the PowerPoint and its notes.