Optional presentation practice. Choices and model launches do not write LMS grades, completion or certificates. This extension takes additional learning time.
1. Work equipment safety and PUWER awareness Judge the equipment, task and safeguards across the whole working life.
2. Choose a learning route 3. Start with how equipment can harm Start with how equipment can harm.
Work equipment can cut, crush, draw in, entangle, eject material or release electrical, pressure or thermal energy. Noise, vibration, dust and fumes can also cause harm.
Work equipment can cut, crush, draw in, entangle, eject material or release electrical, pressure or thermal energy. Noise, vibration, dust and fumes can also cause harm. The relevant question is how the actual task brings a person into that pathway, including setup, cleaning, adjustment and maintenance. An operator may be safe during normal running but exposed during a frequent jam. A general equipment label does not describe all those situations.
Identify the machine, material, users, environment and foreseeable interventions before choosing controls. Include cleaners, maintainers, contractors and people nearby. Compare what happens at the workface with the instructions. Repeated workarounds or difficult access are evidence that the equipment or method may not suit the job; they should inform the design and control review.
4. The fictional case and decision boundary Start with how equipment can harm.
Task and setting A small workshop buys a used machine. Cleaning access is awkward, jams recur and the team uses an informal workaround while a known safeguard defect awaits attention. Decision to practise A used machine carries a supplier mark and starts correctly, but its instructions do not cover the proposed material or the cleaning access needed after each production run. Evidence to consider Check suitability before and after purchase.
5. Decision 1: interpret the evidence A used machine carries a supplier mark and starts correctly, but its instructions do not cover the proposed material or the cleaning access needed after each production run.
What should govern acceptance?
Suitability for the actual use, safeguards and intervention needs. (supported response) The supplier mark as complete workplace approval. Only the fact that the motor starts. Product information contributes to the decision but cannot replace the task-specific suitability assessment.
6. Reconsider the evidence What should govern acceptance?
Suitability for the actual use, safeguards and intervention needs. (supported response) The supplier mark as complete workplace approval. Only the fact that the motor starts. Product information contributes to the decision but cannot replace the task-specific suitability assessment.
7. Decision 1 explained Product information contributes to the decision but cannot replace the task-specific suitability assessment.
Check suitability before and after purchase.
8. Check suitability before and after purchase Check suitability before and after purchase.
Suitable equipment must fit its intended use, environment and people, including the tasks needed to keep it working. A conformity mark, supplier statement or low purchase price does not establish that a used or new machine is suitable for this operation.
Suitable equipment must fit its intended use, environment and people, including the tasks needed to keep it working. A conformity mark, supplier statement or low purchase price does not establish that a used or new machine is suitable for this operation. Consider material, capacity, stability, access, controls, safeguards, instructions and the actual cleaning and maintenance method. Hired or contractor equipment needs the same attention to its use and interfaces.
Check the physical machine against the accepted information before release. A change of product, layout or duty can invalidate earlier assumptions. Ask who controls modifications and how competent acceptance is recorded. Better purchasing can remove foreseeable dangerous interventions; accepting awkward access and then relying on warnings can build an avoidable failure into the daily work.
9. Match the assurance question Match each card to its meaning. Drag, or use the labelled category selector.
Match each card to its meaning. Drag, or use the labelled category selector.
Does the machine fit the product and cleaning task? — Suitability. Suitability covers actual use. Can a person reach dangerous parts? — Safeguarding. Physical access protection matters. Can the user demonstrate the agreed defect response? — Competence. Attendance alone does not establish understanding. 10. Compare the reasoning: Match the assurance question Does the machine fit the product and cleaning task? Suitability Can a person reach dangerous parts? Safeguarding Can the user demonstrate the agreed defect response? Competence
Match each card to its meaning. Drag, or use the labelled category selector.
Does the machine fit the product and cleaning task? — Suitability. Suitability covers actual use. Can a person reach dangerous parts? — Safeguarding. Physical access protection matters. Can the user demonstrate the agreed defect response? — Competence. Attendance alone does not establish understanding. 11. Remove dangerous intervention before relying on behaviour Remove dangerous intervention before relying on behaviour.
Look for ways to eliminate the need to reach dangerous parts, such as correcting recurring jams or redesigning feed and cleaning access. Then use suitable physical safeguards and safe controls.
Look for ways to eliminate the need to reach dangerous parts, such as correcting recurring jams or redesigning feed and cleaning access. Then use suitable physical safeguards and safe controls. Information, training and supervision support those measures, but they cannot make an exposed blade or nip point acceptable when effective guarding is practicable. PPE also cannot prevent every mechanical injury and may introduce other risks around moving parts.
The safeguarding decision must fit the machine and real access needs. A convenient long tool is not automatically equivalent to enclosing a dangerous part. Competent engineering review is needed for safety-function changes. If nuisance trips or bypasses occur, investigate the design and work pressures rather than simply issuing another warning while the hazardous route remains available.
Open the related fictional model case
12. Decision 2: choose the response An interlock is unreliable and operators reset it repeatedly to keep production moving. A maintenance request exists, so the supervisor considers the reporting duty complete and proposes continued use.
What remains necessary?
Bypass the interlock until maintenance arrives. Control the unsafe use and obtain competent defect resolution. (supported response) Use the request number as proof the safeguard works. Reporting creates an action; it does not restore the protective function or justify unsafe operation.
13. Compare the consequences What remains necessary?
Bypass the interlock until maintenance arrives. Control the unsafe use and obtain competent defect resolution. (supported response) Use the request number as proof the safeguard works. Reporting creates an action; it does not restore the protective function or justify unsafe operation.
14. Decision 2 explained Reporting creates an action; it does not restore the protective function or justify unsafe operation.
Act on safeguards and condition defects.
15. Act on safeguards and condition defects Act on safeguards and condition defects.
Missing guards, unreliable interlocks, damaged leads, repeated trips and overdue safety work are warning signs. A machine that still produces output may have lost an essential protective function. Users should know the checks relevant to their equipment and how to stop and report a concern.
Missing guards, unreliable interlocks, damaged leads, repeated trips and overdue safety work are warning signs. A machine that still produces output may have lost an essential protective function. Users should know the checks relevant to their equipment and how to stop and report a concern. A sticker or an entry in a maintenance queue does not override a current safety defect. Repeated resets can hide the condition instead of resolving it.
Keep the affected equipment out of use where the required safeguard is ineffective, and prevent others inheriting the same defect. Record the machine identity, observation, immediate restriction and responsible action. Competent people assess and repair the function under the appropriate safe system. Do not defeat a device, reach into the danger or improvise a repair to demonstrate the fault.
16. Sort equipment signals Sort the cards. Drag each card, or use its labelled category selector.
Sort the cards. Drag each card, or use its labelled category selector.
A required guard remains absent during production after cleaning. — Requires action or review. Review access and safe intervention. The machine still meets the output target. — Insufficient assurance. Production does not prove protection. The new task differs from supplier instructions. — Requires action or review. Suitability is unresolved. A maintenance ticket exists, so the fault is safe. — Insufficient assurance. A ticket does not restore the function. 17. Compare the reasoning: Sort equipment signals A required guard remains absent during production after cleaning. Requires action or review The machine still meets the output target. Insufficient assurance The new task differs from supplier instructions. Requires action or review A maintenance ticket exists, so the fault is safe. Insufficient assurance
Sort the cards. Drag each card, or use its labelled category selector.
A required guard remains absent during production after cleaning. — Requires action or review. Review access and safe intervention. The machine still meets the output target. — Insufficient assurance. Production does not prove protection. The new task differs from supplier instructions. — Requires action or review. Suitability is unresolved. A maintenance ticket exists, so the fault is safe. — Insufficient assurance. A ticket does not restore the function. 18. Plan cleaning and jam response as real work Plan cleaning and jam response as real work.
Cleaning and clearing blockages can expose people to dangerous movement and stored energy. The work needs a defined method, competent roles and the appropriate isolation and verification for every relevant source.
Cleaning and clearing blockages can expose people to dangerous movement and stored energy. The work needs a defined method, competent roles and the appropriate isolation and verification for every relevant source. A stopped motor does not prove that a conveyor, pressure system, suspended part or linked machine cannot move. An interlock or emergency stop is not automatically a maintenance isolation. Awareness training cannot supply a generic sequence for all equipment.
Use the actual machine information and authorised intervention arrangements. Keep people clear while the uncertainty is resolved; do not reach into a jam to find its cause or ask a colleague to watch the controls. If unexpected energy, material or linked operation appears, withdraw and revise the plan. Effective equipment design should make the required safe intervention usable in practice.
Open the related fictional model case
19. Decision 3: apply and review A safeguard repair is marked complete, but the required functional check and revised cleaning instruction are outstanding. The production team asks to restart because the engineer has left the area.
What supports release?
The completed work-order label alone. The absence of the engineer as proof of acceptance. Verified protective function and an accepted usable method communicated to the team. (supported response) Handback requires the relevant restored function and safe-use arrangements, not merely administrative completion.
20. Revisit the control or support boundary What supports release?
The completed work-order label alone. The absence of the engineer as proof of acceptance. Verified protective function and an accepted usable method communicated to the team. (supported response) Handback requires the relevant restored function and safe-use arrangements, not merely administrative completion.
21. Decision 3 explained Handback requires the relevant restored function and safe-use arrangements, not merely administrative completion.
Verify repair, competence and handback.
22. Verify repair, competence and handback Verify repair, competence and handback.
Useful evidence connects the equipment and task to suitability, safeguards, inspection, maintenance and user understanding. The physical machine must match the record. A competent repair should address the specified protective function, with relevant testing and acceptance before reuse.
Useful evidence connects the equipment and task to suitability, safeguards, inspection, maintenance and user understanding. The physical machine must match the record. A competent repair should address the specified protective function, with relevant testing and acceptance before reuse. Inspection arrangements depend on the equipment and circumstances; a generic annual certificate is not a substitute for the requirements that actually apply. Users still need current checks and a defect route.
Handback should account for people, tools, refitted guards and restored protective arrangements, with any changed method communicated to the owner and users. Demonstrate understanding of the actual work rather than counting attendance alone. Keep restrictions open where verification is missing. A signed work order or paid invoice cannot establish that the machine is ready for the task.
23. Hand back the changed machine Make a decision at each point and use the feedback before continuing.
Make a decision at each point and use the feedback before continuing.
Stage 1: What is the status? The repair is physically complete but required testing is pending.
The affected use remains restricted. — Supported choice. Verification is still missing. Any completed repair authorises production. — Reconsider. Completion is not functional acceptance. Delete the test requirement. — Reconsider. A missing result cannot be erased. Stage 2: What remains? Testing is accepted, but the safe cleaning method has changed.
Rely on last year attendance list. — Reconsider. It does not demonstrate the new method. Communicate and verify understanding of the accepted method. — Supported choice. Users need workable current instructions. Let users discover the change during a jam. — Reconsider. That creates avoidable exposure. 24. Compare the reasoning: Hand back the changed machine What is the status? The affected use remains restricted. What remains? Communicate and verify understanding of the accepted method.
Make a decision at each point and use the feedback before continuing.
Stage 1: What is the status? The repair is physically complete but required testing is pending.
The affected use remains restricted. — Supported choice. Verification is still missing. Any completed repair authorises production. — Reconsider. Completion is not functional acceptance. Delete the test requirement. — Reconsider. A missing result cannot be erased. Stage 2: What remains? Testing is accepted, but the safe cleaning method has changed.
Rely on last year attendance list. — Reconsider. It does not demonstrate the new method. Communicate and verify understanding of the accepted method. — Supported choice. Users need workable current instructions. Let users discover the change during a jam. — Reconsider. That creates avoidable exposure. 26. Take the learning into a fictional task Verify repair, competence and handback.
Task and people A small workshop buys a used machine. Cleaning access is awkward, jams recur and the team uses an informal workaround while a known safeguard defect awaits attention. Control or support Act on safeguards and condition defects. Check and review Verify repair, competence and handback.
27. Explain your reasoning without the answer sheet Use the supplied case facts. Explain why a choice fits the task and what remains uncertain. A points total or completed form cannot replace the required control or support arrangement.
28. Continue with the full course and Knowledge Hub Use the original course for its six lessons, required activities, final assessment and saved record. This optional companion does not change course grades, completion or certificates.
Enable JavaScript for interactive practice, or use the PowerPoint and its notes.