Optional presentation practice. Choices and model launches do not write LMS grades, completion or certificates. This extension takes additional learning time.
1. Safe systems of work and task planning Combine safeguards, a usable method and clear task decisions.
2. Choose a learning route 3. Understand the work system Explain why a method is more than a document.
A safe system of work is the planned way to complete a task after its hazards, people, equipment and changing conditions have been assessed. It combines suitable physical safeguards with a usable sequence, competent people, clear interfaces and stop decisions.
A safe system of work is the planned way to complete a task after its hazards, people, equipment and changing conditions have been assessed. It combines suitable physical safeguards with a usable sequence, competent people, clear interfaces and stop decisions. A written method alone does not prevent contact with moving machinery, release of stored energy or exposure to harmful material when the control it describes is absent. A safe system of work is the bridge between a risk assessment and a task being done safely. It should explain the task, hazards, people affected, controls, sequence, competence, equipment, supervision, emergency action and stop points. The quality test is whether a competent worker can use it to do the work safely in real conditions.
4. The fictional case and decision boundary Explain why a method is more than a document.
Task and setting A fictional maintenance team receives a familiar document for a task with unfamiliar interfaces. Decision to practise Fictional case: A planner copies a routine method for an unusual maintenance task. The new task exposes stored energy and involves another team, neither considered in the copied sequence. Evidence to consider Identify people, equipment and interfaces before work.
5. Decision 1: interpret the evidence Fictional case: A planner copies a routine method for an unusual maintenance task. The new task exposes stored energy and involves another team, neither considered in the copied sequence.
What should planning do?
Keep the routine method because it is familiar. Let the crew discover conditions during work. Assess the actual task and dependencies before agreeing its method and responsibilities. (supported response) The safe system must fit the real activity.
6. Reconsider the evidence What should planning do?
Keep the routine method because it is familiar. Let the crew discover conditions during work. Assess the actual task and dependencies before agreeing its method and responsibilities. (supported response) The safe system must fit the real activity.
7. Decision 1 explained The safe system must fit the real activity.
Identify people, equipment and interfaces before work.
8. Plan the actual sequence Identify people, equipment and interfaces before work.
A good SSOW is built from real task analysis and hierarchy-led control, not copied text. The best safe systems are written after watching the job and talking to the people who do it.
A good SSOW is built from real task analysis and hierarchy-led control, not copied text. The best safe systems are written after watching the job and talking to the people who do it. That is how hidden hazards, awkward steps, time pressure and informal adaptations are found. HSE machinery safety . A safe system should then be tested before issue. If workers cannot follow it in real conditions, the system should change before work continues. Observe the actual job and identify each task step, person and harm route. Choose physical safeguards before preparing the method, then test whether workers can follow the sequence, recognise changed conditions and stop safely. A safe system should include normal work, non-routine work, cleaning, maintenance, breakdowns, emergencies, contractor interfaces, new starters, vulnerable workers and environmental changes.
9. Build the task system Arrange the steps for this case. Drag, or use Move up and Move down.
Arrange the steps for this case. Drag, or use Move up and Move down.
Define the actual task and relevant hazards. Choose reviewed controls and the usable sequence. Confirm competent roles, information and readiness. Communicate stop conditions and verify the arrangement in use. Planning connects safeguards, method, people and verification.
10. Compare the reasoning: Build the task system 1 Define the actual task and relevant hazards. 2 Choose reviewed controls and the usable sequence. 3 Confirm competent roles, information and readiness. 4 Communicate stop conditions and verify the arrangement in use.
Arrange the steps for this case. Drag, or use Move up and Move down.
Define the actual task and relevant hazards. Choose reviewed controls and the usable sequence. Confirm competent roles, information and readiness. Communicate stop conditions and verify the arrangement in use. Planning connects safeguards, method, people and verification.
11. Build stronger precautions into the method Compare design changes and arrangements dependent on action.
Remove or reduce the hazard before relying on procedures or personal protection. For safe systems of work, assess the actual task and first look for a way to remove the hazard.
Remove or reduce the hazard before relying on procedures or personal protection. For safe systems of work, assess the actual task and first look for a way to remove the hazard. Where that is not possible, consider a safer substitute, engineered separation and then clear work procedures. PPE protects against remaining exposure; it does not make an uncontrolled task safe. HSE hierarchy of controls The selected measures need a named owner, a usable stop point and a check that they still work when the task or conditions change. In Northern Ireland, verify the separate legal route and site instructions. A maintainer needs access behind a conveyor guard; prevent unexpected motion and released stored energy. ERICPD is a planning crossmap.
Open the related fictional model case
12. Decision 2: choose the response Fictional case: The instruction says check everything and continue normally. It does not identify the required state, accepting role or response if an indication conflicts with the task plan.
What should improve?
Specific checks, decision boundaries and clear stop or escalation conditions. (supported response) More general reassurance. A rule to choose the most convenient indication. Users need a method that supports the actual decision.
13. Compare the consequences What should improve?
Specific checks, decision boundaries and clear stop or escalation conditions. (supported response) More general reassurance. A rule to choose the most convenient indication. Users need a method that supports the actual decision.
14. Decision 2 explained Users need a method that supports the actual decision.
Use clear decisions and stop conditions.
15. Make the method usable Use clear decisions and stop conditions.
A procedure should support decision-making at the point of work, not bury critical information. HSE operating-procedure guidance is especially useful here: procedures should reflect plant practice, use simple familiar language, identify prerequisites, place warnings before relevant steps and be validated before issue. HSE procedures .
A procedure should support decision-making at the point of work, not bury critical information. HSE operating-procedure guidance is especially useful here: procedures should reflect plant practice, use simple familiar language, identify prerequisites, place warnings before relevant steps and be validated before issue. HSE procedures . For ordinary workplaces, the same principles apply. A good procedure is clear, current, task-specific, usable and supported by training and supervision. A safe system should not be used to justify weak engineering where stronger controls are reasonably practicable. A key professional lesson is that procedural controls are often weaker than design or engineering controls. If a guard, barrier, isolation, LEV, mechanical aid or separation control is available and proportionate, the safe system should include it rather than replace it.
16. Improve the vague instruction Choose every supported action. Leave the unsuitable actions unselected.
Choose every supported action. Leave the unsuitable actions unselected.
Identify required checks and decision roles. — Supported action. Make the task usable. Choose any reassuring indication. — Leave unselected. A conflict needs resolution. State the stop and escalation route. — Supported action. Users need a boundary. 17. Compare the reasoning: Improve the vague instruction Identify required checks and decision roles. Supported action Choose any reassuring indication. Leave unselected State the stop and escalation route. Supported action
Choose every supported action. Leave the unsuitable actions unselected.
Identify required checks and decision roles. — Supported action. Make the task usable. Choose any reassuring indication. — Leave unselected. A conflict needs resolution. State the stop and escalation route. — Supported action. Users need a boundary. 18. Confirm readiness and understanding Choose evidence beyond attendance.
Keep the current assessment and method alongside proof that the physical controls work, people are competent, defects were resolved and a named person released the task. Records should allow a supervisor to reconstruct a hold and restart decision. Evidence is as important as explanation.
Keep the current assessment and method alongside proof that the physical controls work, people are competent, defects were resolved and a named person released the task. Records should allow a supervisor to reconstruct a hold and restart decision. Evidence is as important as explanation. A competent manager should be able to retrieve records that show who owns the control, what standard applies, what was checked and what changed after findings. Evidence should combine documents, field observation and conversations. A form may show intent, but observation and worker understanding show whether the safe system is alive. For roller cleaning, compare the task assessment and product information with the physical guard, isolation point, lock-off and zero-energy test.
Open the related fictional model case
19. Decision 3: apply and review Fictional case: An extra connection is discovered during work. The agreed method does not cover it, and the outgoing team wants to hand back the task as complete before clarification.
What is sound?
Describe the task as complete to match the schedule. Restrict the affected work and resolve scope, condition and hand-back through the responsible route. (supported response) Test the connection by opening it. Changed conditions need a controlled decision, not improvisation.
20. Revisit the control or support boundary What is sound?
Describe the task as complete to match the schedule. Restrict the affected work and resolve scope, condition and hand-back through the responsible route. (supported response) Test the connection by opening it. Changed conditions need a controlled decision, not improvisation.
21. Decision 3 explained Changed conditions need a controlled decision, not improvisation.
Recognise a changed task and controlled hand-back.
22. Stop when the basis changes Recognise a changed task and controlled hand-back.
Pause the affected work when the live task differs from the assessment, a critical control is missing, or the person authorised to release it cannot resolve the mismatch.
Pause the affected work when the live task differs from the assessment, a critical control is missing, or the person authorised to release it cannot resolve the mismatch. Make the area or plant safe, identify the owner and record the evidence needed before a competent restart decision. Escalation must be practical. Supervisors and workers need to know which conditions mean stop, pause, seek authorisation, redesign the work or involve a competent specialist. The decision guide should be used during planning, pre-start briefings, live supervision, audit sampling and incident learning. If the work no longer matches the assessment or procedure, the safe answer is to stop and re-establish control. A missing guard, unclear isolation, unexpected motion or cleaner with unknown hazards is a no-go.
23. Match the hand-back status Match each card to its meaning. Drag, or use the labelled category selector.
Match each card to its meaning. Drag, or use the labelled category selector.
The specified component was fitted. — Work performed. This describes completed work. A temporary connection is unresolved. — Configuration question. Actual state remains uncertain. The authorised role accepts the required conditions. — Operational acceptance. This is a separate defined decision. 24. Compare the reasoning: Match the hand-back status The specified component was fitted. Work performed A temporary connection is unresolved. Configuration question The authorised role accepts the required conditions. Operational acceptance
Match each card to its meaning. Drag, or use the labelled category selector.
The specified component was fitted. — Work performed. This describes completed work. A temporary connection is unresolved. — Configuration question. Actual state remains uncertain. The authorised role accepts the required conditions. — Operational acceptance. This is a separate defined decision. 25. Apply the lesson in a fictional workplace A signed RAMS sheet lists hazards but omits the public, adjacent trades, changing ground and who will verify the controls.
Recognise a changed task and controlled hand-back.
Open the related fictional model case
26. Take the learning into a fictional task Recognise a changed task and controlled hand-back.
Task and people A fictional maintenance team receives a familiar document for a task with unfamiliar interfaces. Control or support Use clear decisions and stop conditions. Check and review Recognise a changed task and controlled hand-back.
27. Explain your reasoning without the answer sheet Use the supplied case facts. Explain why a choice fits the task and what remains uncertain. A points total or completed form cannot replace the required control or support arrangement.
28. Continue with the full course and Knowledge Hub Use the original course for its six lessons, required activities, final assessment and saved record. This optional companion does not change course grades, completion or certificates.
Enable JavaScript for interactive practice, or use the PowerPoint and its notes.