Managing health and safety with Plan–Do–Check–Act · detailed source study

Optional reference study from the SHAREhub topic pages and selected source records used for this course. The core learning-time estimate excludes this extended reference.

How does leadership connect Plan, Do, Check, Act in a health and safety management system?
How does leadership connect Plan, Do, Check, Act in a health and safety management system?

Source: health-and-safety-management-systems--pdca-leadership-cycle

Plan, Do, Check, Act (PDCA) connects what an organisation intends to achieve with what people do, the evidence of results and the changes needed to improve. Leadership keeps those four parts connected; the arrows show a repeating cycle, not a one-off paperwork exercise. The document hierarchy shows what supports the system. PDCA explains how that system stays alive: turn policy and legal duties into controlled work, test the results and change what is ineffective. ISO 45001:2018 + Amd 1:2024 Understand the activities and people affected, identify hazards, assess risks and opportunities, establish applicable requirements and set owned OH&S objectives. Risk profiling informs planning as well as implementation. Evidence to connect: Activity review; risk and legal registers; worker input; objectives, owners, resources and measures of success.

Diagram Provide competent people, usable current information and suitable resources. Operate the agreed controls and manage procurement, contractors, change and emergencies with worker involvement. Evidence to connect: Current policies and procedures; competence evidence; maintenance and operational records; contractor, change and emergency arrangements. Diagram Evaluate reliable monitoring and measurement, relevant compliance evidence, internal audits and management review. Routine checks and independent audit serve different purposes; low accident numbers alone cannot show that controls work. Evidence to connect: First-line checks; exposure and control-performance information; compliance evaluations; audit samples and management-review decisions. Diagram Respond to incidents, nonconformities and ineffective controls. Protect people, address the causes, assign action and verify effectiveness, then update affected risks, arrangements and competence requirements.

Evidence to connect: Corrective actions with owners and dates; cause analysis; verified changes; revised documents and feedback into the next plan. Diagram Leaders own the effectiveness of the OH&S system, set priorities and provide resources. Context defines what the system must address; worker consultation and participation inform decisions throughout the cycle, not just at the centre. Evidence to connect: An accurate system scope; policy commitments; clear authority and responsibilities; worker participation; resource and review decisions followed through. Diagram Read the picture as a learning aid, not an official ISO clause diagram. Its risk-profiling label sits under Do; ISO planning also addresses hazards, risks, opportunities and relevant obligations before work begins.

Likewise, formal ISO management review is part of performance evaluation, with its decisions feeding subsequent improvement. Activities can span more than one stage. What must we achieve and what could prevent it? Understand the organisation and its activities, identify requirements and significant risks, and agree objectives, responsibilities, resources and measures of success. Useful evidence: Policy commitments; activity and risk registers; applicable obligations; objectives with owners and baselines. Risk and legal register · Related guidance Are the planned arrangements working in daily practice? Provide competent people, suitable equipment and current instructions. Operate and maintain controls, involve workers, and manage suppliers, contractors, changes and emergencies. Useful evidence: Controlled procedures; competence evidence; operating and maintenance records; contractor and change decisions.

Management-system documents · Related guidance What does reliable evidence tell us? Use operational checks, monitoring, appropriate compliance evaluation, internal audit and management review to test results and control effectiveness. Low accident numbers alone are not enough. Useful evidence: Routine checklist findings; measurements and trends; audit samples; compliance evaluations; management-review decisions. Routine checklists and auditing · Related guidance What will change and how will we know it helped? Correct the immediate problem, address its causes, assign improvements and verify their effectiveness. Feed the learning back into the next plan and the affected documents, risks and training. Useful evidence: Corrective actions with owners; revised controls and documents; verification results; updated objectives and lessons.

Incidents and improvement actions · Related guidance Clause 4 (context) and clause 5 (leadership) shape the whole system, not just one quadrant. ISO 45001 also places worker consultation and participation at the heart of the system. Support, risk decisions and learning continue across stage boundaries. An integrated system may share a document register, audit programme or change process, but it must retain the distinct safety, quality and environmental criteria. Success in one area does not excuse failure in another. For concrete cutting, connect the relevant policy and assessment to the actual dust-control method. Put the agreed equipment, instruction and supervision in place. Check the control in use and review suitable exposure evidence.

If it is ineffective, restrict the affected work, resolve the cause, verify the revised method and update the linked records. This is an illustrative system trail, not a task-specific safe method or completed assessment. In the SHAREhub environment: link the risk or objective, its current arrangement, monitoring evidence and any improvement action. Retain a responsible owner, relevant dates and evidence that the change worked; a link between records is not proof of effectiveness. The cycle can organise a management system, but the diagram, a document library or a completed checklist does not establish conformity, certification or legal compliance. Use the authorised applicable standard and actual workplace evidence. Do not wait for the next audit or annual review to address an ineffective control.

Interpretation and edition references: HSE: managing health and safety through PDCA; HSE: Managing for health and safety (HSG65); ISO 45001: published edition and scope; ISO/TC 283: ISO 45001 clause-family guidance and FAQs; ISO 9001:2026: quality management systems; ISO 14001:2026: environmental management systems. Source links checked 2026-10-20; this is not whole-page technical approval.

How should a health and safety management system start with business activities?
How should a health and safety management system start with business activities?

Source: health-and-safety-management-systems--business-review

Review what the business actually does, identify the risks arising from those activities, establish the applicable legal requirements and build practical arrangements that control the work. Use Plan, Do, Check, Act to keep those arrangements effective. Review what the business actually does, identify the risks arising from those activities, establish the applicable legal requirements and build practical arrangements that control the work. Use Plan, Do, Check, Act to keep those arrangements effective. Build a health and safety management system around what the business actually does. Apply it: Which part of this plan would you check at the workface before authorising the task? Build a health and safety management system around what the business actually does.

Review its activities, identify the risks and applicable legal duties, then develop practical systems of work with clear responsibilities, competent people and effective controls. Risk register and CDM project risk profile. Apply it: What evidence would show that the change improves this task, rather than only completing a record? Assessing: Map significant risk areas and decide which need corporate standards, project controls and specialist review. Evidence / response: Risk register and CDM project risk profile. Analysing: Compare policy, project plans, RAMS, inspections, audits and incidents to see where the system drifts. Evidence / response: Assurance dashboard and audit themes. Apply it: At which point would you hold this example, and what evidence would allow it to proceed?

Policy is not linked to arrangements: Intent does not reach the work. Risk assessments are copied: Controls do not match real work. Actions close without proof: Weak controls remain. Apply it: Who could be exposed, including other trades, cleaners, maintainers and people nearby? Eliminate: Design surface-mounted containment or a preformed service route so no chase is cut. Reduce: Select a compatible lower-dust board or prefabricated route where specification allows. Isolate: Keep other trades out of the dust release path with a verified enclosure. Control: Use suitable chaser and on-tool extraction for the actual material and depth. Control: Schedule the work, limit cut length and prohibit dry sweeping. Read the full control table for qualifications, ownership and verification.

Use the actual task and applicable jurisdiction; existing technical approval remains unchanged. Apply it: Which stronger option can be used here, and who will verify it before accepting the remaining risk? Use the full topic for the decision points, practical examples, detailed control tables and source scope. HSE guidance applies to Great Britain; use HSENI for the Northern Ireland route and the source’s stated jurisdiction. A simplified guide does not change the page’s technical-review or approval status. Apply it: Which official source and full-topic section will you use to resolve the next decision? Keep one card or the full set for social sharing, team briefings and learning. Each PDF contains one card per page. Read the full topic for explanations, questions and source links.

Review what the business actually does, identify the risks arising from those activities, establish the applicable legal requirements and build practical arrangements that control the work. Review what the business actually does, identify the risks arising from those activities, establish the applicable legal requirements and build practical arrangements that control the work. Use Plan, Do, Check, Act to keep those arrangements effective. Build a health and safety management system around what the business actually does. Apply it: Which part of this plan would you check at the workface before authorising the task? Use the evidence to improve the actual work arrangement. Build a health and safety management system around what the business actually does.

Review its activities, identify the risks and applicable legal duties, then develop practical systems of work with clear responsibilities, competent people and effective controls. Risk register and CDM project risk profile. Apply it: What evidence would show that the change improves this task, rather than only completing a record? Fictional example: a practical application of the existing topic lesson. Assessing: Map significant risk areas and decide which need corporate standards, project controls and specialist review. Evidence / response: Risk register and CDM project risk profile. Analysing: Compare policy, project plans, RAMS, inspections, audits and incidents to see where the system drifts. Evidence / response: Assurance dashboard and audit themes.

Apply it: At which point would you hold this example, and what evidence would allow it to proceed? Connect the task, the route to the person and the control that can fail. Policy is not linked to arrangements: Intent does not reach the work. Risk assessments are copied: Controls do not match real work. Actions close without proof: Weak controls remain. Apply it: Who could be exposed, including other trades, cleaners, maintainers and people nearby? Start with the stronger practicable options and verify their effect. Eliminate: Design surface-mounted containment or a preformed service route so no chase is cut. Reduce: Select a compatible lower-dust board or prefabricated route where specification allows. Isolate: Keep other trades out of the dust release path with a verified enclosure.

Control: Use suitable chaser and on-tool extraction for the actual material and depth. Control: Schedule the work, limit cut length and prohibit dry sweeping. Read the full control table for qualifications, ownership and verification. Use the actual task and applicable jurisdiction; existing technical approval remains unchanged. Apply it: Which stronger option can be used here, and who will verify it before accepting the remaining risk? Follow the official sources below and retain the task-specific evidence. Use the full topic for the decision points, practical examples, detailed control tables and source scope. HSE guidance applies to Great Britain; use HSENI for the Northern Ireland route and the source’s stated jurisdiction. A simplified guide does not change the page’s technical-review or approval status.

Apply it: Which official source and full-topic section will you use to resolve the next decision? Simplified learning guide. Use the full topic and the actual work arrangements; existing technical-review and approval statuses still apply. Workplace scenarios labelled fictional are illustrative examples. The activity review is the foundation of the management system. Involve workers and supervisors, observe the work and compare existing arrangements with what happens in practice. Leadership sets the scope, responsibilities and resources; the activity and risk review determines which operating arrangements the business needs. Map services, processes, sites, people, equipment and materials. Include routine work, deliveries, cleaning, maintenance, contractors, unusual conditions and emergencies. Record where activities interact and who may be affected.

Output: an activity map with a responsible manager for each area. For each activity, identify hazards, who could be harmed and how, and whether current controls work. Include immediate injury and longer-term health risks. Prioritise gaps by risk, with action owners and completion dates. Output: activity risk assessments and a prioritised risk register linked to the activity map. Check which legal requirements apply to the actual work and location. Record the duty, why it applies, the action needed and the evidence that will demonstrate it is being met. Resolve uncertainty with competent support before finalising arrangements. Output: a legal register linked to activities, risk assessments and control arrangements. Use the hierarchy of controls to remove hazards or reduce risks at source.

Decide how the activity will be planned, authorised, carried out, maintained and handed back. Specify essential controls, responsibilities and conditions that require work to stop. Output: workable operating standards and safe methods, supported by maintenance, procurement, contractor and emergency arrangements where relevant. Provide the equipment, time, competent people, instruction and supervision needed. Test the method with those doing the work. Keep instructions accessible, check understanding and confirm controls are in place before work starts. Output: working controls, clear responsibilities and evidence of implementation. Check critical controls during work and evaluate compliance against the legal register. Review inspections, incidents, worker feedback and audit findings. Leaders assign and resource improvements, verify their effectiveness and update the activity map, assessments and arrangements when things change.

Output: verified actions and a revised plan for the next cycle. Keep the connections visible: activity → risk assessment → applicable duty → control and safe method → responsible person → check and evidence → review and improvement. The risk and legal reviews inform one another; revisit both when the activity or requirements change. Continue with the legal register, Plan, Do, Check, Act and the Build Out UK management system explorer. Guidance: HSE risk assessment steps; HSE managing health and safety; HSG65. The sequence and outputs above are SHARE’s practical application of these principles.

How should a legal register turn health and safety duties into practical action?
How should a legal register turn health and safety duties into practical action?

Source: health-and-safety-management-systems--legal-register

A useful legal register connects each applicable requirement to the activities it affects, the controls required, a responsible person and evidence of implementation. A list of legislation alone does not show compliance. The legal register and risk register answer different questions. The risk register describes what could cause harm and how it is controlled. The legal register identifies the applicable duties and how the business will meet and check them. Link the two to the same activities and procedures. Worked connection — refurbishment dust: the activity review identifies concrete chasing; the assessment identifies silica exposure; the legal review identifies the applicable substance-control duties.

The operating arrangement considers avoiding the chase, then specifies the necessary dust controls, competent users, equipment checks and stop conditions for any remaining cutting. Inspections and maintenance evidence test whether the controls work; defects feed back into the method and management review. This is an illustrative connection, not a complete assessment or legal-register entry. HSE concrete chasing guidance. A legal register is a practical management tool; there is no general requirement for every business to keep a document with that name. The underlying duties are to comply with applicable law and maintain effective arrangements. Use current requirements for the relevant jurisdiction, including separate Northern Ireland instruments and nation-specific requirements where applicable. HSE management duties; GB and Northern Ireland duties.

What are the key points for health and safety management systems?

Source: health-and-safety-management-systems--key-points

Start with business activities, identify their risks and legal duties, and build practical controls that improve through Plan, Do, Check, Act. Learning point: Relationship map from the current topic. Official source supports the management principle; example requires local verification. Source basis: HSE health and safety management systems. Learning point: Relationship map from the current topic. Official source supports the management principle; example requires local verification. Source basis: HSE health and safety management systems. Learning point: Relationship map from the current topic. Official source supports the management principle; example requires local verification. Source basis: HSE health and safety management systems.

What does a health and safety management system mean?

Source: health-and-safety-management-systems--meaning

It means the repeatable arrangements that make risk control happen before, during and after work. A management system connects policy, risk assessment, people, controls, monitoring and learning. It should make clear who does what, when and how. It should also show how decisions are made when circumstances change, such as a new contractor, new equipment, a near miss, a health surveillance trend or a maintenance backlog. The most useful way to test a system is to follow a risk from identification to control. If a dust hazard is identified, the system should show how exposure is assessed, how controls are selected, how workers are trained, how LEV is maintained, how health surveillance is considered and how performance is reviewed.

A system connects a named owner, the site risk profile, working controls and feedback; a procedure library alone cannot show whether silica extraction works. HSE health and safety management systems

How does Plan, Do, Check, Act keep a health and safety management system working?

Source: health-and-safety-management-systems--pdca

Plan, Do, Check, Act is a continuous cycle that keeps health and safety arrangements controlled and improving. Use the cycle on one real control. The Plan, Do, Check, Act cycle is applied to a fictional lift-truck guard-check arrangement. Define the check and responsibility, implement it, observe normal use and sample records, then correct weaknesses and verify improvement. Check asks whether the intended arrangements work in practice. Representative records, discussion with users and observation of normal use provide evidence about implementation. Corroborate that the prescribed checks happen and controls remain effective; completed forms alone do not prove this. Management-cycle example only. The lift-truck guard and operating scenes do not prescribe a guard design, inspection test or permission to operate.

Source guidance: HSE HSG65 Plan starts with the business activity review: assess the risks, identify applicable duties through the legal register, and design the controls, responsibilities, resources and objectives. Do puts the safe methods, equipment, competence and supervision into use. Check tests control effectiveness and compliance through observation, monitoring, inspection and audit. Act uses the findings to improve arrangements and update the activity, risk and legal reviews. The business review and PDCA belong together. The review establishes what must be managed; PDCA keeps it managed. Involve workers throughout and repeat the review when activities, people, equipment, legal requirements or evidence of control effectiveness change.

Plan the no-chase route, implement compatible extraction if cutting remains, check capture during work and act on defects before repeating the task. HSG65 Managing for health and safety

How formal should a health and safety management system be?
How formal should a health and safety management system be?

Source: health-and-safety-management-systems--proportionate

The system should be proportionate to the size, complexity and risk profile of the organisation. The right level of formality depends on the risk, complexity and pace of change. A small business may control simple risks with simple arrangements, while construction, public-facing and major-hazard settings need stronger standards, evidence and assurance. A small low-risk operation may need simple arrangements, but a multi-project contractor needs enough coordination to keep high-risk controls consistent. HSE health and safety management systems

How do formal, certified and informal health and safety management systems differ?

Source: health-and-safety-management-systems--formal-informal

Informal systems can manage simple risks; formal and certified systems add structure, evidence and assurance where complexity increases. A formal system can help because it defines responsibilities, standards, records and review. Certification can provide external assurance and supply-chain confidence. But both can fail if attention shifts from risk control to maintaining certificates and documents. An informal system can be effective in simple settings when the owner understands the risks, talks to workers, fixes problems and reviews change. It becomes weak when knowledge sits in one person's head or when growth, contractors and complexity outpace the arrangements. Certification can demonstrate a system was assessed against a standard; it does not establish that this contractor’s extraction captures dust today. HSE health and safety management systems

What elements should a health and safety management system include?

Source: health-and-safety-management-systems--system-elements

A management system should cover leadership, policy, planning, risk control, competence, communication, monitoring, audit and review. The elements below should work together. If leadership, policy, risk assessment, operational control, competence, consultation, monitoring and review sit in separate silos, the system can look complete while failing in practice. Policy, risk assessment, competence, consultation, operating checks and learning must connect to the same task owner. HSG65 Managing for health and safety

How does a health and safety management system flow from policy to improvement?

Source: health-and-safety-management-systems--system-flow

A good management system connects leadership intent and the business activity review to risks, applicable duties, practical controls, evidence and improvement. The policy sets direction and responsibilities.

Review the business activities

and assess their risks. Use a legal register to identify applicable duties. Design and implement practical arrangements for each activity, with named owners and competent people. Monitoring and compliance evaluation check the result; management review resources improvements and closes the PDCA loop. This flow is especially useful for learners because it turns HSG65 and Plan, Do, Check, Act into a practical story. It also helps managers avoid isolated documents: a policy without a risk register is vague; a risk register without controls is a list; controls without monitoring are assumptions; actions without verification are hope. A defect report should travel from the cutting crew to repair, competent verification and a changed project standard if the problem recurs. HSG65 Managing for health and safety

How should a health and safety management system connect policy to real work?

Source: health-and-safety-management-systems--policy-to-field

The system should show a visible line from the policy promise to the control used by the worker. This worked flow shows how a broad policy promise becomes a task control. It helps learners and managers see the route from a signed policy to risk assessment, supervision, verification and review. For this separate work-at-height flow, ask the site supervisor to show the actual access/edge or fragile-surface controls, rescue arrangements and the stop rule when protection fails. The concrete-chasing example elsewhere is a different task. HSE concrete chasing and mortar raking

How should a risk register support a health and safety management system?

Source: health-and-safety-management-systems--risk-register

A risk register should help leaders prioritise controls, ownership, monitoring and review instead of acting as a static list. Build the risk register from the activity review and assessments. Link each significant scenario to the relevant legal-register entry, operating procedure, control owner, assurance checks and review triggers. These connections turn the register into a tool for decisions and follow-up. Record the inhalation harm route, exposed trades, control owner, failed-capture stop point and evidence of recovery. HSG65 Managing for health and safety

How should competence fit into a health and safety management system?

Source: health-and-safety-management-systems--competence

Competence should be defined by role, risk and task, then checked through evidence of performance. Competence is more than attending a course. A supervisor needs to know what good looks like, when to stop work and how to verify controls. A maintenance engineer needs technical knowledge, isolation discipline and limits of authority. A senior leader needs enough understanding to challenge dashboards and resource risk-based decisions. A management system should therefore define competence requirements, assessment methods, refresher triggers and supervision needs. Assess the cutter and supervisor on the installed tool and extraction method, not on attendance at a generic induction. HSG65 Managing for health and safety

How should worker consultation support a health and safety management system?
How should worker consultation support a health and safety management system?

Source: health-and-safety-management-systems--consultation

Consultation improves control quality by involving the people who understand the work and its practical barriers. Consultation is strongest when it is matched to the decision being made. The routes below range from formal safety representatives to task-level briefings and design reviews, because different issues need different conversations. Ask cutters why hoses are disconnected and let their answers change tool selection and procurement. HSE consulting and involving workers

How should monitoring and review keep a health and safety management system effective?

Source: health-and-safety-management-systems--monitoring-review

Monitoring and review should show whether controls are working, drifting or needing stronger action. Monitoring and review keep the system alive after arrangements have been written. The examples below show how inspection, audit, incident learning, health data and management review should lead to action. A management review should challenge repeat extraction failures and fund a design or supplier change. HSG65 Managing for health and safety

What records show that a health and safety management system is working?

Source: health-and-safety-management-systems--records

Records should prove decision quality, control implementation and review, not just document existence. Records should prove that controls were selected, implemented, checked and improved. The table helps distinguish useful evidence from records that exist only because someone expected a document. Match equipment checks and action logs to observations of actual dust capture; a completed form alone is weak evidence. HSG65 Managing for health and safety

Which health and safety management duties apply in Great Britain and Northern Ireland?

Source: health-and-safety-management-systems--legal

Effective management duties apply in each jurisdiction; an ISO certificate or policy document does not replace control of the work. Use the instrument for the site and workforce. Reporting a specified dangerous occurrence is distinct from recording an ordinary near miss; neither replaces checking the actual control. Management of Health and Safety at Work Regulations 1999 Management of Health and Safety at Work Regulations (NI) 2000 Reporting of Injuries, Diseases and Dangerous Occurrences Regulations 2013 Reporting of Injuries, Diseases and Dangerous Occurrences Regulations (NI) 1997

How can the hierarchy of controls guide practical risk reduction within a management system?

Source: health-and-safety-management-systems--hierarchy-applied

ERICPD is used here as a planning mnemonic. The linked HSE five-level hierarchy is the official source for the order and relative reliability of controls; the two labels are not identical. The document, dashboard or audit can assign and test a control; the hierarchy applies to the real hazard and people exposed. BuildOut Ltd plans concrete chasing during refurbishment. Cutting can release respirable crystalline silica; breathing it can cause silicosis, COPD and lung cancer. The management system must let a designer remove the cut, a supervisor hold failed extraction and leaders verify the repair. HSE concrete chasing and mortar raking HSE silica cancer and lung-disease risk ERICPD is a six-stage planning aid. HSE’s five levels place elimination and substitution before engineering, administration and residual PPE.

Isolate normally maps to engineered separation; ERICPD Control may be physical or administrative. Discipline sustains the selected control through maintenance, supervision and learning. HSE five-level hierarchy HSE five-level hierarchy ERICPD is a planning crossmap. Its prompts do not add a sixth rung or rank Isolate above engineering. Discipline verifies and sustains every control level. The hierarchy of controls in ISO 45001:2018 comes under Clause 8.1.2 (Eliminating hazards and reducing OH&S risks), which is located within Clause 8 ("Operation"). ESEAP: Elimination, Substitution, Engineering controls, Administrative controls and PPE. Control order: HSE hierarchy of controls and IOSH hierarchy of control guidance.

How should a health and safety management system verify controls for a task?

Source: health-and-safety-management-systems--standards

Learning point: Evidence map: these are the current topic’s explanation and conditions. HSE supports proportionate health and safety management; the task example is SHARE editorial guidance, not a clause-level claim from a commercial standard. Source basis: HSE management-system and ISO 45001 advice. For concrete chasing on a refurbishment project, the management check should start with a real control decision: Design surface-mounted containment or a preformed service route so no chase is cut. Name the person who will test it, keep evidence from the actual work, and reopen the assessment when the failure condition in the hierarchy table occurs. HSE management-system guidance. A review should compare the planned control with what workers and supervisors can use in practice.

Record the defect, owner, interim protection, verification and next review trigger so that a policy statement or certificate does not stand in for a working control.

How could BuildOut Ltd connect its system to project controls?
How could BuildOut Ltd connect its system to project controls?

Source: health-and-safety-management-systems--business-example

BuildOut Ltd would use a proportionate formal management system to control construction risk across projects and contractors. Learning point: Compare the named situations, controls and evidence together. Official source supports the management principle; example requires local verification. Source basis: HSE concrete chasing and mortar raking. Learning point: Compare the named situations, controls and evidence together. Official source supports the management principle; example requires local verification. Source basis: HSE concrete chasing and mortar raking. In this fictional example, BuildOut Ltd has multiple refurbishment and construction projects. Its system must connect corporate policy to project-level planning, contractor control, work at height, temporary works, dust, lifting, plant, fire and welfare arrangements. BuildOut’s project records matter only if its supervisors can hold work when silica control fails.

HSE concrete chasing and mortar raking

How can health and safety management-system decisions transfer across sectors?

Source: health-and-safety-management-systems--sector-transfer

Transfer the decision method, not the assumed control: identify people, harm route, strongest feasible safeguard and hold point. A policy, system or indicator becomes useful when the owner tests the actual barrier under the conditions of work. HSG65 Managing for health and safety HSE health and safety management systems

How can readers practise health and safety management-system decisions?

Source: health-and-safety-management-systems--study

Use health and safety management systems as a workplace case: identify the real task, the person who owns the control decision and the evidence that shows the control is working. State what would make work pause and who would authorise a safe restart. Then trace each legal or medical claim to a direct source in Official links, checking whether it applies in Great Britain, Northern Ireland or both. Explain any uncertainty and the specialist advice needed rather than filling the gap with an assumed rule. These are SHARE practice prompts, not an accredited syllabus or marking rule. For management-system context, see HSE management-system guidance.

What must each role demonstrate before acting within a health and safety management system?

Source: health-and-safety-management-systems--training

Role awareness must be followed by a practical demonstration, an assessor and a reassessment trigger. Use the live or simulated task to test the stop decision and control evidence. A briefing, certificate or dashboard does not release a failed physical safeguard. HSE concrete chasing and mortar raking HSG65 Managing for health and safety HSE health and safety management systems

What warning signs show a management system is failing?

Source: health-and-safety-management-systems--warning-signs

Warning signs appear when the system creates documents but does not change control, behaviour or decisions. Warning signs are included because failure usually appears before a serious event. Treat these points as prompts for inspection, audit, supervision and management review rather than as simple compliance statements.

What are the key points for health and safety policy?

Source: health-and-safety-policy--key-points

A policy should explain intent, responsibilities and arrangements in a way that changes what people do. Source basis: HSE prepare a health and safety policy. Source basis: HSE prepare a health and safety policy. A policy should explain intent, responsibilities and arrangements in a way that changes what people do. A health and safety policy sets out how an employer will manage risk, who owns decisions and which practical arrangements make the commitment real. Apply it: Which part of this plan would you check at the workface before authorising the task? A health and safety policy sets out how an employer will manage risk, who owns decisions and which practical arrangements make the commitment real.

In both Great Britain and Northern Ireland, employers with five or more employees must record the policy in writing and communicate it. Risk profile and policy review notes. Apply it: What evidence would show that the change improves this task, rather than only completing a record? Assessing: Review activities, people affected, public interface, contractors and seasonal changes before updating policy arrangements. Evidence / response: Risk profile and policy review notes. Analysing: Compare incidents, customer complaints, audits and worker feedback to identify where responsibilities are unclear. Evidence / response: Trend review and responsibility gap analysis. Apply it: At which point would you hold this example, and what evidence would allow it to proceed? Policy is generic: Controls do not match actual risk.

People cannot describe responsibilities: Gaps appear during incidents or audits. Objectives are vague: Improvement cannot be measured. Apply it: Who could be exposed, including other trades, cleaners, maintainers and people nearby? Eliminate: Redesign access so deliveries drive through without reversing across the entrance. Reduce: Test smaller vehicle and outside-zone transfer if through access is not feasible. Isolate: Use fixed pedestrian barriers and a separate accessible route. Control: Add designed gate and visibility aids after separation is secured. Control: Book deliveries outside peak arrival and brief drivers on route. Read the full control table for qualifications, ownership and verification. Use the actual task and applicable jurisdiction; existing technical approval remains unchanged.

Apply it: Which stronger option can be used here, and who will verify it before accepting the remaining risk? Use the full topic for the decision points, practical examples, detailed control tables and source scope. HSE guidance applies to Great Britain; use HSENI for the Northern Ireland route and the source’s stated jurisdiction. A simplified guide does not change the page’s technical-review or approval status. Apply it: Which official source and full-topic section will you use to resolve the next decision? Keep one card or the full set for social sharing, team briefings and learning. Each PDF contains one card per page. Read the full topic for explanations, questions and source links.

A policy should explain intent, responsibilities and arrangements in a way that changes what people do. A policy should explain intent, responsibilities and arrangements in a way that changes what people do. A health and safety policy sets out how an employer will manage risk, who owns decisions and which practical arrangements make the commitment real. Apply it: Which part of this plan would you check at the workface before authorising the task? Use the evidence to improve the actual work arrangement. A health and safety policy sets out how an employer will manage risk, who owns decisions and which practical arrangements make the commitment real.

In both Great Britain and Northern Ireland, employers with five or more employees must record the policy in writing and communicate it. Risk profile and policy review notes. Apply it: What evidence would show that the change improves this task, rather than only completing a record? Fictional example: a practical application of the existing topic lesson. Assessing: Review activities, people affected, public interface, contractors and seasonal changes before updating policy arrangements. Evidence / response: Risk profile and policy review notes. Analysing: Compare incidents, customer complaints, audits and worker feedback to identify where responsibilities are unclear. Evidence / response: Trend review and responsibility gap analysis. Apply it: At which point would you hold this example, and what evidence would allow it to proceed?

Connect the task, the route to the person and the control that can fail. Policy is generic: Controls do not match actual risk. People cannot describe responsibilities: Gaps appear during incidents or audits. Objectives are vague: Improvement cannot be measured. Apply it: Who could be exposed, including other trades, cleaners, maintainers and people nearby? Start with the stronger practicable options and verify their effect. Eliminate: Redesign access so deliveries drive through without reversing across the entrance. Reduce: Test smaller vehicle and outside-zone transfer if through access is not feasible. Isolate: Use fixed pedestrian barriers and a separate accessible route. Control: Add designed gate and visibility aids after separation is secured. Control: Book deliveries outside peak arrival and brief drivers on route.

Read the full control table for qualifications, ownership and verification. Use the actual task and applicable jurisdiction; existing technical approval remains unchanged. Apply it: Which stronger option can be used here, and who will verify it before accepting the remaining risk? Follow the official sources below and retain the task-specific evidence. Use the full topic for the decision points, practical examples, detailed control tables and source scope. HSE guidance applies to Great Britain; use HSENI for the Northern Ireland route and the source’s stated jurisdiction. A simplified guide does not change the page’s technical-review or approval status. Apply it: Which official source and full-topic section will you use to resolve the next decision? Simplified learning guide.

Use the full topic and the actual work arrangements; existing technical-review and approval statuses still apply. Workplace scenarios labelled fictional are illustrative examples.

What does a health and safety policy mean?
What does a health and safety policy mean?

Source: health-and-safety-policy--meaning

A health and safety policy is the organisation's written or stated approach to managing health and safety in practice. The policy should be simple enough for people to understand and specific enough to guide decisions. It should not try to hold every procedure. Its job is to set direction, define responsibility and point to the practical arrangements that control risk. A good policy links to the wider management system. If it promises safe contractors, the arrangements should explain contractor selection, induction, permits, supervision and review. If it promises worker involvement, the arrangements should say how consultation happens and how feedback is closed. A policy names the commitment, decision owners and arrangements that keep visitors out of vehicle routes. HSE prepare a health and safety policy

What does the law require for health and safety policy?

Source: health-and-safety-policy--legal-requirement

Employers need a health and safety policy; in both Great Britain and Northern Ireland, those with five or more employees must write it down. HSE guidance explains that a health and safety policy sets out the general approach to health and safety and how the employer will manage it. It should say who does what, when and how, and it must be shared with employees. The legal point is not only the document. The policy should be given effect through arrangements. A written policy that nobody understands or uses is weak evidence of management. The five-employee written threshold applies in both GB and NI; the need to manage vehicle risk applies regardless of headcount. HSE prepare a health and safety policy

What are the three parts of a health and safety policy?

Source: health-and-safety-policy--three-parts

The three parts are statement of intent, responsibilities and arrangements. The three-part structure is the simplest way to test whether a policy is usable. The statement sets intent, responsibilities name ownership, and arrangements explain how the intent will be delivered. State the intent to separate people and vehicles, name the route owner, and link the physical layout and hold rule. HSE prepare a health and safety policy

What could a simple health and safety policy look like?

Source: health-and-safety-policy--mini-policy

Illustrative chain: the site director commits resources for separated pedestrian access; the operations manager (deputy: duty manager) owns local traffic arrangement TRA-01. Before opening, the duty manager checks the barrier and crossing against that arrangement. A damaged barrier closes the affected route. The authorised operations manager receives repair and observed-function evidence before reopening, records the decision and sets the review date. This is an original teaching example, not an approved traffic layout. A simple policy should be specific enough to guide responsibility and arrangements without becoming a full procedure manual. The example below is deliberately short. A real business would tailor it to its activities, risks, size, locations, workforce and consultation arrangements.

The value is in the structure: clear intent, named responsibility and practical arrangements that point to the controls used in the management system. For learners, this is a useful way to remember that a policy is not only a signed statement. It should show who owns the system and how the organisation will plan, organise, control, monitor and review health and safety. A short example should identify who stops a delivery when the entrance route is occupied. HSE prepare a health and safety policy

What should the statement of intent include?

Source: health-and-safety-policy--statement

The statement should set the organisation's commitment, aims and leadership accountability in plain language. A statement of intent should be short, credible and specific. It should make a real commitment to prevention, resources and review rather than relying on slogans that workers and managers cannot apply. A signed commitment matters when leaders fund a route change and keep visitors away from reversing vehicles. HSE prepare a health and safety policy

How should responsibilities be written?

Source: health-and-safety-policy--responsibilities

Responsibilities should be specific enough that people know what they own and what evidence they must provide. Responsibilities need enough detail for people to understand their authority and evidence requirements. The examples below show how roles differ across directors, managers, supervisors, workers, advisers and contractors. Name who controls bookings, barrier maintenance, driver instruction and authority to hold a delivery. HSE prepare a health and safety policy

What practical arrangements should a policy point to?

Source: health-and-safety-policy--arrangements

Arrangements should describe how the organisation plans, organises, controls, monitors and reviews health and safety. Arrangements are where policy becomes management practice. They should point readers towards the controls, registers, checks and reviews that actually manage significant risks. The policy should point to a site-specific traffic plan, not try to replace the swept-path design. HSE separating pedestrians and vehicles

How should objectives and SMART targets be used?
How should objectives and SMART targets be used?

Source: health-and-safety-policy--objectives

Illustrative local objective: the operations manager owns the review of 20 defined high-risk handling tasks at the baseline date. By 31 December 2026, eliminate or redesign at least six so no more than 14 remain in that assessed set. The competent assessor verifies the task changes and any transferred risks; the manager signs off the evidence. Record additions/removals to the task set separately. Briefing attendance alone cannot demonstrate achievement. Objectives should turn policy intent into measurable improvement that links to significant risk. A weak objective says 'reduce accidents'. A stronger objective names the risk area, improvement, owner, measure and review date. Objectives should focus on meaningful control improvement, not only injury reduction. Objectives should also be realistic.

A target that can be achieved only by under-reporting is dangerous. Better targets measure action closure, control quality, competence, exposure reduction or audit findings. Measure verified route separation and closure of pedestrian conflicts, not only the number of briefings. HSG65 Managing for health and safety

How should the policy be communicated?

Source: health-and-safety-policy--communication

The policy should be communicated so people understand what it means for their role and work. Communication should be matched to the audience and the change being made. A policy update may need induction, team briefing, consultation and supervisor conversation, not just an intranet upload. Tell workers, drivers and contractors which route to use and whom to contact when the gate or barrier fails. HSE prepare a health and safety policy

How should a health and safety policy be kept current?

Source: health-and-safety-policy--current

A policy should be reviewed regularly and whenever work, risk, law, people or evidence changes. Policies should change when the organisation, work, law, risk profile or evidence changes. The triggers below are practical prompts for review rather than waiting for an arbitrary annual date. Review the arrangement when a supplier changes vehicle size, the entrance moves or a conflict is reported. HSE prepare a health and safety policy

How is a policy different from a procedure?

Source: health-and-safety-policy--policy-v-procedure

A policy sets intent and responsibilities; procedures explain how specific activities are controlled. This distinction helps stop one document doing too much. Policies set direction, while standards, procedures, assessments and checklists translate that direction into practical control. The policy sets responsibility and intent; the traffic procedure gives the safe route and live stop point. HSE prepare a health and safety policy

What evidence shows a policy is working?

Source: health-and-safety-policy--evidence

Evidence should show that the policy is known, applied, reviewed and linked to real controls. Evidence should be read as a chain rather than a filing exercise. A single record rarely proves good management on its own; stronger assurance comes from matching records, observations, interviews, trends and verified action closure. Check the route at busy arrival times and ask staff whether they can actually hold a conflicting delivery. HSE separating pedestrians and vehicles

What common weaknesses make policies ineffective?

Source: health-and-safety-policy--weaknesses

Policies fail when they are generic, poorly communicated, out of date or disconnected from real arrangements. Weak policies usually fail because they are too generic, poorly owned or disconnected from real arrangements. The table shows how those weaknesses appear and what a stronger approach would look like. A policy that says “safety first” but leaves visitors in a reversing path has failed to assign effective control. HSE prepare a health and safety policy

Which duties apply in Great Britain and Northern Ireland?

Source: health-and-safety-policy--legal

Effective management duties apply in each jurisdiction; an ISO certificate or policy document does not replace control of the work. Use the instrument for the site and workforce. Reporting a specified dangerous occurrence is distinct from recording an ordinary near miss; neither replaces checking the actual control. Management of Health and Safety at Work Regulations 1999 Management of Health and Safety at Work Regulations (NI) 2000 Reporting of Injuries, Diseases and Dangerous Occurrences Regulations 2013 Reporting of Injuries, Diseases and Dangerous Occurrences Regulations (NI) 1997 Both HSE and HSENI say a written health and safety policy is required when an employer has five or more employees; below that threshold a written policy can still help.

The policy must be communicated and kept useful in the work. HSE prepare a health and safety policy HSENI health and safety policy

How can the ISO 45001 hierarchy of controls turn health and safety policy into effective risk controls?
How can the ISO 45001 hierarchy of controls turn health and safety policy into effective risk controls?

Source: health-and-safety-policy--hierarchy-applied

ERICPD is used here as a planning mnemonic. The linked HSE five-level hierarchy is the official source for the order and relative reliability of controls; the two labels are not identical. The document, dashboard or audit can assign and test a control; the hierarchy applies to the real hazard and people exposed. Riverside Leisure Ltd receives deliveries beside a public entrance. A reversing vehicle can strike and crush a visitor. The policy must name the owner of the route, require pedestrian separation and empower staff to hold a delivery when the route is occupied; a signed statement alone is not a barrier. HSE separating pedestrians and vehicles ERICPD is a six-stage planning aid.

HSE’s five levels place elimination and substitution before engineering, administration and residual PPE. Isolate normally maps to engineered separation; ERICPD Control may be physical or administrative. Discipline sustains the selected control through maintenance, supervision and learning. HSE five-level hierarchy HSE five-level hierarchy The hierarchy of controls in ISO 45001:2018 comes under Clause 8.1.2 (Eliminating hazards and reducing OH&S risks), which is located within Clause 8 ("Operation"). ESEAP: Elimination, Substitution, Engineering controls, Administrative controls and PPE. Control order: HSE hierarchy of controls and IOSH hierarchy of control guidance.

How should management verify controls for this task?

Source: health-and-safety-policy--standards

Source basis: HSE management-system and ISO 45001 advice. For delivery vehicle reversing across a leisure-centre pedestrian entrance, the management check should start with a real control decision: Redesign access so deliveries drive through without reversing across the entrance. Name the person who will test it, keep evidence from the actual work, and reopen the assessment when the failure condition in the hierarchy table occurs. HSE management-system guidance. A review should compare the planned control with what workers and supervisors can use in practice. Record the defect, owner, interim protection, verification and next review trigger so that a policy statement or certificate does not stand in for a working control.

How could Riverside Leisure Ltd make its policy real?

Source: health-and-safety-policy--business-example

Riverside Leisure Ltd would use its health and safety policy to connect public-facing leisure risks to clear responsibilities and local arrangements. Source basis: HSE separating pedestrians and vehicles. Source basis: HSE separating pedestrians and vehicles. In this fictional example, Riverside Leisure Ltd operates leisure centres, pools, events and food outlets. Its policy must be simple enough for frontline teams and clear enough to cover public safety, contractors, young workers, pool operations, fire, hygiene and wellbeing. Riverside should test the entrance layout at peak use and update its policy arrangement after a route change. HSE separating pedestrians and vehicles

How does this management decision transfer across sectors?

Source: health-and-safety-policy--sector-transfer

Transfer the decision method, not the assumed control: identify people, harm route, strongest feasible safeguard and hold point. A policy, system or indicator becomes useful when the owner tests the actual barrier under the conditions of work. HSG65 Managing for health and safety HSE health and safety management systems

How can readers practise this decision?

Source: health-and-safety-policy--study

Use health and safety policy as a workplace case: identify the real task, the person who owns the control decision and the evidence that shows the control is working. State what would make work pause and who would authorise a safe restart. Then trace each legal or medical claim to a direct source in Official links, checking whether it applies in Great Britain, Northern Ireland or both. Explain any uncertainty and the specialist advice needed rather than filling the gap with an assumed rule. These are SHARE practice prompts, not an accredited syllabus or marking rule. For management-system context, see HSE management-system guidance.

What must each role demonstrate before acting?

Source: health-and-safety-policy--training

Role awareness must be followed by a practical demonstration, an assessor and a reassessment trigger. Use the live or simulated task to test the stop decision and control evidence. A briefing, certificate or dashboard does not release a failed physical safeguard. HSE separating pedestrians and vehicles HSE prepare a health and safety policy HSENI health and safety policy

What warning signs show the policy is not working?

Source: health-and-safety-policy--warning-signs

Warning signs appear when the policy is known as a document but not used as a management tool. Warning signs are included because failure usually appears before a serious event. Treat these points as prompts for inspection, audit, supervision and management review rather than as simple compliance statements.

Source tables and records 1
Practical legal register fields

Table ID: health-and-safety-management-systems-legal-register-design

Source: https://www.sharehub.ltd/knowledge-hub/health-and-safety-management-systems.html Scope: Illustrative SHARE register fields. Check the exact applicable duty rather than treating this format as a legal requirement.

Row 1

Column 1

Activity and location

Column 2

Identify the process, site, people and jurisdiction covered; link the relevant activity and risk assessment.

Row 2

Column 1

Requirement and applicability

Column 2

Record the current instrument and relevant provision, the duty in practical terms and why it applies. Record the reason for any exclusion.

Row 3

Column 1

Required arrangements

Column 2

Link the duty to operating controls, procedures, competence, maintenance, examinations or other actions it requires.

Row 4

Column 1

Owner and resources

Column 2

Name the responsible role, competent support, resources, action deadline and any escalation route.

Row 5

Column 1

Evidence and evaluation

Column 2

Record what was checked, when and by whom, with links to observations and records. Distinguish a planned action from a control verified in use.

Row 6

Column 1

Gaps and review

Column 2

Track unresolved duties, corrective actions and review dates. Recheck after legal, activity, equipment, site or workforce changes and relevant findings.

Read the complete comparison table
Practical legal register fields
RowColumn 1Column 2
1Activity and locationIdentify the process, site, people and jurisdiction covered; link the relevant activity and risk assessment.
2Requirement and applicabilityRecord the current instrument and relevant provision, the duty in practical terms and why it applies. Record the reason for any exclusion.
3Required arrangementsLink the duty to operating controls, procedures, competence, maintenance, examinations or other actions it requires.
4Owner and resourcesName the responsible role, competent support, resources, action deadline and any escalation route.
5Evidence and evaluationRecord what was checked, when and by whom, with links to observations and records. Distinguish a planned action from a control verified in use.
6Gaps and reviewTrack unresolved duties, corrective actions and review dates. Recheck after legal, activity, equipment, site or workforce changes and relevant findings.
Management system tests

Table ID: health-and-safety-management-systems-management-system-tests

Source: https://www.sharehub.ltd/knowledge-hub/health-and-safety-management-systems.html Scope: Official source supports the management principle; example requires local verification.

Row 1

Test question

Is risk identified?

What it checks

Hazards and affected people are recognised.

Example evidence

Risk assessment, register and worker consultation. HSE health and safety management systems

Row 2

Test question

Is ownership clear?

What it checks

Someone has authority and accountability.

Example evidence

Role descriptions and action owners. HSE health and safety management systems

Row 3

Test question

Are controls implemented?

What it checks

Controls exist and are used in the field.

Example evidence

Observation, inspection and maintenance records. HSE health and safety management systems

Row 4

Test question

Is competence managed?

What it checks

People understand tasks and limits.

Example evidence

Training, assessment and supervision records. HSE health and safety management systems

Row 5

Test question

Is performance reviewed?

What it checks

Evidence changes decisions.

Example evidence

Audit reports and management review actions. HSE health and safety management systems

Read the complete comparison table
Management system tests
RowTest questionWhat it checksExample evidence
1Is risk identified?Hazards and affected people are recognised.Risk assessment, register and worker consultation. HSE health and safety management systems
2Is ownership clear?Someone has authority and accountability.Role descriptions and action owners. HSE health and safety management systems
3Are controls implemented?Controls exist and are used in the field.Observation, inspection and maintenance records. HSE health and safety management systems
4Is competence managed?People understand tasks and limits.Training, assessment and supervision records. HSE health and safety management systems
5Is performance reviewed?Evidence changes decisions.Audit reports and management review actions. HSE health and safety management systems
PDCA in practical terms

Table ID: health-and-safety-management-systems-pdca-in-practical-terms

Source: https://www.sharehub.ltd/knowledge-hub/health-and-safety-management-systems.html Scope: Official source supports the management principle; example requires local verification.

Row 1

Stage

Plan

Practical question

What risks, legal duties, resources and objectives need attention?

Typical evidence

Activity review, risk assessments, risk register, legal register, policy, objectives and resourced programme. HSG65 Managing for health and safety

Row 2

Stage

Do

Practical question

Are controls implemented and understood?

Typical evidence

Procedures, training, supervision and contractor rules. HSG65 Managing for health and safety

Row 3

Stage

Check

Practical question

Are controls working and are weak signals visible?

Typical evidence

Inspections, monitoring, audits and incident findings. HSG65 Managing for health and safety

Row 4

Stage

Act

Practical question

What needs to change because of evidence?

Typical evidence

Management review, action closure and revised arrangements. HSG65 Managing for health and safety

Read the complete comparison table
PDCA in practical terms
RowStagePractical questionTypical evidence
1PlanWhat risks, legal duties, resources and objectives need attention?Activity review, risk assessments, risk register, legal register, policy, objectives and resourced programme. HSG65 Managing for health and safety
2DoAre controls implemented and understood?Procedures, training, supervision and contractor rules. HSG65 Managing for health and safety
3CheckAre controls working and are weak signals visible?Inspections, monitoring, audits and incident findings. HSG65 Managing for health and safety
4ActWhat needs to change because of evidence?Management review, action closure and revised arrangements. HSG65 Managing for health and safety
Proportionate management system examples

Table ID: health-and-safety-management-systems-proportionate-management-system-examples

Source: https://www.sharehub.ltd/knowledge-hub/health-and-safety-management-systems.html Scope: Official source supports the management principle; example requires local verification.

Row 1

Organisation

Small low-risk office

Suitable approach

Simple policy, risk assessments, basic training and periodic review.

Where more formality is needed

If work changes, contractors attend or vulnerable workers need support. HSE health and safety management systems

Row 2

Organisation

Riverside leisure centre

Suitable approach

Formal arrangements for public interface, fire, pool safety, food, contractors and safeguarding.

Where more formality is needed

Seasonal activities, events and young workers. HSE health and safety management systems

Row 3

Organisation

BuildOut construction contractor

Suitable approach

Project-level CPPs, contractor control, inspections, permits and audit programme.

Where more formality is needed

High-risk work, temporary works and multiple sites. HSE health and safety management systems

Row 4

Organisation

Crownway fuel site

Suitable approach

Formal process safety, legal register, barrier assurance and emergency management.

Where more formality is needed

COMAH/DSEAR hazards, major accident scenarios and safety-critical assets. HSE health and safety management systems

Row 5

Organisation

Multi-site business

Suitable approach

Corporate standards with local implementation evidence.

Where more formality is needed

Different sites, managers, cultures and risk profiles. HSE health and safety management systems

Read the complete comparison table
Proportionate management system examples
RowOrganisationSuitable approachWhere more formality is needed
1Small low-risk officeSimple policy, risk assessments, basic training and periodic review.If work changes, contractors attend or vulnerable workers need support. HSE health and safety management systems
2Riverside leisure centreFormal arrangements for public interface, fire, pool safety, food, contractors and safeguarding.Seasonal activities, events and young workers. HSE health and safety management systems
3BuildOut construction contractorProject-level CPPs, contractor control, inspections, permits and audit programme.High-risk work, temporary works and multiple sites. HSE health and safety management systems
4Crownway fuel siteFormal process safety, legal register, barrier assurance and emergency management.COMAH/DSEAR hazards, major accident scenarios and safety-critical assets. HSE health and safety management systems
5Multi-site businessCorporate standards with local implementation evidence.Different sites, managers, cultures and risk profiles. HSE health and safety management systems
System type comparison

Table ID: health-and-safety-management-systems-system-type-comparison

Source: https://www.sharehub.ltd/knowledge-hub/health-and-safety-management-systems.html Scope: Official source supports the management principle; example requires local verification.

Row 1

System type

Informal

Best fit

Small, low-risk, stable work.

Strength

Simple and close to the work.

Failure mode

Relies on memory and one person's knowledge. HSE health and safety management systems

Row 2

System type

Formal internal system

Best fit

Growing or higher-risk business.

Strength

Clear standards, roles and records.

Failure mode

Can become paperwork-heavy. HSE health and safety management systems

Row 3

System type

Certified ISO 45001 system

Best fit

Complex, multi-site or supply-chain driven organisation.

Strength

Structured clauses, audit and external challenge.

Failure mode

Certification mistaken for proof of control. HSE health and safety management systems

Row 4

System type

Sector framework

Best fit

Specialist industries such as process safety, construction or transport.

Strength

Targets sector risks and common controls.

Failure mode

Copied without local adaptation. HSE health and safety management systems

Read the complete comparison table
System type comparison
RowSystem typeBest fitStrengthFailure mode
1InformalSmall, low-risk, stable work.Simple and close to the work.Relies on memory and one person's knowledge. HSE health and safety management systems
2Formal internal systemGrowing or higher-risk business.Clear standards, roles and records.Can become paperwork-heavy. HSE health and safety management systems
3Certified ISO 45001 systemComplex, multi-site or supply-chain driven organisation.Structured clauses, audit and external challenge.Certification mistaken for proof of control. HSE health and safety management systems
4Sector frameworkSpecialist industries such as process safety, construction or transport.Targets sector risks and common controls.Copied without local adaptation. HSE health and safety management systems
Core management system elements

Table ID: health-and-safety-management-systems-core-management-system-elements

Source: https://www.sharehub.ltd/knowledge-hub/health-and-safety-management-systems.html Scope: Official source supports the management principle; example requires local verification.

Row 1

Element

Leadership

Purpose

Set direction, resources and accountability.

Good evidence

Management review and risk decisions. HSG65 Managing for health and safety

Row 2

Element

Policy

Purpose

State intent, responsibilities and arrangements.

Good evidence

Signed, current and communicated policy. HSG65 Managing for health and safety

Row 3

Element

Risk assessment

Purpose

Identify hazards and controls.

Good evidence

Suitable assessments and risk register. HSG65 Managing for health and safety

Row 4

Element

Operational control

Purpose

Make controls work in the field.

Good evidence

Procedures, permits, inspections and supervision. HSG65 Managing for health and safety

Row 5

Element

Competence

Purpose

Ensure people can perform safely.

Good evidence

Role-based training and assessment. HSG65 Managing for health and safety

Row 6

Element

Consultation

Purpose

Use worker knowledge and legal consultation routes.

Good evidence

Meeting notes and feedback loops. HSG65 Managing for health and safety

Row 7

Element

Monitoring and audit

Purpose

Check control health and system performance.

Good evidence

Inspections, audits and indicators. HSG65 Managing for health and safety

Row 8

Element

Learning and review

Purpose

Improve after evidence changes.

Good evidence

Action tracker and updated arrangements. HSG65 Managing for health and safety

Read the complete comparison table
Core management system elements
RowElementPurposeGood evidence
1LeadershipSet direction, resources and accountability.Management review and risk decisions. HSG65 Managing for health and safety
2PolicyState intent, responsibilities and arrangements.Signed, current and communicated policy. HSG65 Managing for health and safety
3Risk assessmentIdentify hazards and controls.Suitable assessments and risk register. HSG65 Managing for health and safety
4Operational controlMake controls work in the field.Procedures, permits, inspections and supervision. HSG65 Managing for health and safety
5CompetenceEnsure people can perform safely.Role-based training and assessment. HSG65 Managing for health and safety
6ConsultationUse worker knowledge and legal consultation routes.Meeting notes and feedback loops. HSG65 Managing for health and safety
7Monitoring and auditCheck control health and system performance.Inspections, audits and indicators. HSG65 Managing for health and safety
8Learning and reviewImprove after evidence changes.Action tracker and updated arrangements. HSG65 Managing for health and safety
Worked management system flow

Table ID: health-and-safety-management-systems-worked-management-system-flow

Source: https://www.sharehub.ltd/knowledge-hub/health-and-safety-management-systems.html Scope: Official source supports the management principle; example requires local verification.

Row 1

Flow step

Business activity review

What happens

Map actual work, people, locations and interfaces, then assess the activity risks.

Example output

Activity map and linked risk assessments with owners and priorities.

Row 2

Flow step

Applicable legal duties

What happens

Identify duties for each activity and jurisdiction and translate them into required arrangements.

Example output

Legal register linked to activities, control standards, owners and compliance evidence.

Row 3

Flow step

Policy

What happens

Leadership states intent, scope, responsibilities and commitment to prevent harm.

Example output

Signed policy with clear accountabilities. HSG65 Managing for health and safety

Row 4

Flow step

Risk register

What happens

Significant risk scenarios are captured, prioritised and owned.

Example output

Register showing work at height, workplace transport, dust and contractor risks. HSG65 Managing for health and safety

Row 5

Flow step

Controls

What happens

ERICPD-style controls are selected and translated into standards, procedures and task controls.

Example output

Edge protection standard, traffic segregation plan and COSHH controls. HSG65 Managing for health and safety

Row 6

Flow step

Competence

What happens

Roles are matched to training, assessment, authorisation and supervision requirements.

Example output

Supervisor competence matrix and contractor onboarding record. HSG65 Managing for health and safety

Row 7

Flow step

Monitoring

What happens

First-line checks confirm controls are present and used during work.

Example output

Closed-question site inspection and permit check. HSG65 Managing for health and safety

Row 8

Flow step

Audit

What happens

System audits and independent reviews sample documents, interviews and work as done under a defined mandate.

Example output

Internal audit report with risk-ranked findings. HSG65 Managing for health and safety

Row 9

Flow step

Review

What happens

Leaders review trends, repeated weaknesses, change and resource needs.

Example output

Management review minutes with decisions and owners. HSG65 Managing for health and safety

Row 10

Flow step

Improvement

What happens

Actions are implemented and verified in the workplace.

Example output

Action closure evidence, re-audit and updated standards. HSG65 Managing for health and safety

Read the complete comparison table
Worked management system flow
RowFlow stepWhat happensExample output
1Business activity reviewMap actual work, people, locations and interfaces, then assess the activity risks.Activity map and linked risk assessments with owners and priorities.
2Applicable legal dutiesIdentify duties for each activity and jurisdiction and translate them into required arrangements.Legal register linked to activities, control standards, owners and compliance evidence.
3PolicyLeadership states intent, scope, responsibilities and commitment to prevent harm.Signed policy with clear accountabilities. HSG65 Managing for health and safety
4Risk registerSignificant risk scenarios are captured, prioritised and owned.Register showing work at height, workplace transport, dust and contractor risks. HSG65 Managing for health and safety
5ControlsERICPD-style controls are selected and translated into standards, procedures and task controls.Edge protection standard, traffic segregation plan and COSHH controls. HSG65 Managing for health and safety
6CompetenceRoles are matched to training, assessment, authorisation and supervision requirements.Supervisor competence matrix and contractor onboarding record. HSG65 Managing for health and safety
7MonitoringFirst-line checks confirm controls are present and used during work.Closed-question site inspection and permit check. HSG65 Managing for health and safety
8AuditSystem audits and independent reviews sample documents, interviews and work as done under a defined mandate.Internal audit report with risk-ranked findings. HSG65 Managing for health and safety
9ReviewLeaders review trends, repeated weaknesses, change and resource needs.Management review minutes with decisions and owners. HSG65 Managing for health and safety
10ImprovementActions are implemented and verified in the workplace.Action closure evidence, re-audit and updated standards. HSG65 Managing for health and safety
Policy to field example

Table ID: health-and-safety-management-systems-policy-to-field-example

Source: https://www.sharehub.ltd/knowledge-hub/health-and-safety-management-systems.html Scope: Official source supports the management principle; example requires local verification.

Row 1

System layer

Policy

Example for work at height

Commitment to prevent falls and manage contractors.

Evidence

Signed policy and objectives. HSE: Working at height—planning, prevention and rescue

Row 2

System layer

Standard

Example for work at height

Work at height standard sets hierarchy and permit requirements.

Evidence

Controlled standard. HSE: Working at height—planning, prevention and rescue

Row 3

System layer

Assessment

Example for work at height

Task-specific assessment identifies roof edge and fragile surface risk.

Evidence

RAMS and site survey. HSE: Working at height—planning, prevention and rescue

Row 4

System layer

Implementation

Example for work at height

Edge protection, MEWP, rescue plan and competent operators.

Evidence

Inspection, training and equipment records. HSE: Working at height—planning, prevention and rescue

Row 5

System layer

Verification

Example for work at height

Supervisor checks controls before work and during task.

Evidence

Closed-question checklist and photos. HSE: Working at height—planning, prevention and rescue

Row 6

System layer

Review

Example for work at height

Near miss leads to revised contractor mobilisation gate.

Evidence

Investigation and action closure. HSE: Working at height—planning, prevention and rescue

Read the complete comparison table
Policy to field example
RowSystem layerExample for work at heightEvidence
1PolicyCommitment to prevent falls and manage contractors.Signed policy and objectives. HSE: Working at height—planning, prevention and rescue
2StandardWork at height standard sets hierarchy and permit requirements.Controlled standard. HSE: Working at height—planning, prevention and rescue
3AssessmentTask-specific assessment identifies roof edge and fragile surface risk.RAMS and site survey. HSE: Working at height—planning, prevention and rescue
4ImplementationEdge protection, MEWP, rescue plan and competent operators.Inspection, training and equipment records. HSE: Working at height—planning, prevention and rescue
5VerificationSupervisor checks controls before work and during task.Closed-question checklist and photos. HSE: Working at height—planning, prevention and rescue
6ReviewNear miss leads to revised contractor mobilisation gate.Investigation and action closure. HSE: Working at height—planning, prevention and rescue
Risk register fields

Table ID: health-and-safety-management-systems-risk-register-fields

Source: https://www.sharehub.ltd/knowledge-hub/health-and-safety-management-systems.html Scope: Official source supports the management principle; example requires local verification.

Row 1

Field

Risk scenario

Why it matters

Describes what can happen.

Example

Forklift collision with pedestrian at dispatch. HSG65 Managing for health and safety

Row 2

Field

Current controls

Why it matters

Shows what is relied on now.

Example

Segregated route, barriers and marshal. HSG65 Managing for health and safety

Row 3

Field

Control owner

Why it matters

Defines accountability.

Example

Warehouse manager. HSG65 Managing for health and safety

Row 4

Field

Assurance method

Why it matters

Shows how control health is checked.

Example

Weekly route inspection and audit sample. HSG65 Managing for health and safety

Row 5

Field

Action and due date

Why it matters

Turns review into improvement.

Example

Barrier upgrade by named date. HSG65 Managing for health and safety

Row 6

Field

Review trigger

Why it matters

Keeps the register current.

Example

Layout change, near miss or traffic increase. HSG65 Managing for health and safety

Read the complete comparison table
Risk register fields
RowFieldWhy it mattersExample
1Risk scenarioDescribes what can happen.Forklift collision with pedestrian at dispatch. HSG65 Managing for health and safety
2Current controlsShows what is relied on now.Segregated route, barriers and marshal. HSG65 Managing for health and safety
3Control ownerDefines accountability.Warehouse manager. HSG65 Managing for health and safety
4Assurance methodShows how control health is checked.Weekly route inspection and audit sample. HSG65 Managing for health and safety
5Action and due dateTurns review into improvement.Barrier upgrade by named date. HSG65 Managing for health and safety
6Review triggerKeeps the register current.Layout change, near miss or traffic increase. HSG65 Managing for health and safety
Competence system examples

Table ID: health-and-safety-management-systems-competence-system-examples

Source: https://www.sharehub.ltd/knowledge-hub/health-and-safety-management-systems.html Scope: Official source supports the management principle; example requires local verification.

Row 1

Role

Director

Competence need

Understand legal duties, risk profile and resource decisions.

Evidence

Leadership training and board review. HSG65 Managing for health and safety

Row 2

Role

Supervisor

Competence need

Verify controls and manage change at the workface.

Evidence

Field assessment and inspection quality. HSG65 Managing for health and safety

Row 3

Role

Worker

Competence need

Understand hazards, controls and stop-work triggers.

Evidence

Task briefing and observation. HSG65 Managing for health and safety

Row 4

Role

HSE adviser

Competence need

Advise within competence and escalate specialist issues.

Evidence

CPD, qualification and advice records. HSG65 Managing for health and safety

Row 5

Role

Contractor

Competence need

Meet site standards and task competence.

Evidence

Prequalification and induction. HSG65 Managing for health and safety

Read the complete comparison table
Competence system examples
RowRoleCompetence needEvidence
1DirectorUnderstand legal duties, risk profile and resource decisions.Leadership training and board review. HSG65 Managing for health and safety
2SupervisorVerify controls and manage change at the workface.Field assessment and inspection quality. HSG65 Managing for health and safety
3WorkerUnderstand hazards, controls and stop-work triggers.Task briefing and observation. HSG65 Managing for health and safety
4HSE adviserAdvise within competence and escalate specialist issues.CPD, qualification and advice records. HSG65 Managing for health and safety
5ContractorMeet site standards and task competence.Prequalification and induction. HSG65 Managing for health and safety
Consultation routes

Table ID: health-and-safety-management-systems-consultation-routes

Source: https://www.sharehub.ltd/knowledge-hub/health-and-safety-management-systems.html Scope: Official source supports the management principle; example requires local verification.

Row 1

Route

Safety representatives

Best used for

Formal worker consultation and inspection feedback.

Evidence

Committee minutes and action tracker. HSE consulting and involving workers

Row 2

Route

Toolbox talks

Best used for

Task-level feedback and immediate learning.

Evidence

Briefing notes and actions. HSE consulting and involving workers

Row 3

Route

Design reviews

Best used for

Controls before equipment or process changes.

Evidence

Design risk review. HSE consulting and involving workers

Row 4

Route

Incident learning sessions

Best used for

Understanding why controls failed.

Evidence

Learning notes and revised controls. HSE consulting and involving workers

Row 5

Route

Surveys or focus groups

Best used for

Culture, workload and wellbeing signals.

Evidence

Themes and action plan. HSE consulting and involving workers

Read the complete comparison table
Consultation routes
RowRouteBest used forEvidence
1Safety representativesFormal worker consultation and inspection feedback.Committee minutes and action tracker. HSE consulting and involving workers
2Toolbox talksTask-level feedback and immediate learning.Briefing notes and actions. HSE consulting and involving workers
3Design reviewsControls before equipment or process changes.Design risk review. HSE consulting and involving workers
4Incident learning sessionsUnderstanding why controls failed.Learning notes and revised controls. HSE consulting and involving workers
5Surveys or focus groupsCulture, workload and wellbeing signals.Themes and action plan. HSE consulting and involving workers
Monitoring and review examples

Table ID: health-and-safety-management-systems-monitoring-and-review-examples

Source: https://www.sharehub.ltd/knowledge-hub/health-and-safety-management-systems.html Scope: Official source supports the management principle; example requires local verification.

Row 1

Evidence source

Inspections

What it shows

Condition of workplace and controls.

Management response

Fix defects and identify repeated causes. HSG65 Managing for health and safety

Row 2

Evidence source

Audits

What it shows

Whether the system matches requirements and field reality.

Management response

Rank findings and verify action closure. HSG65 Managing for health and safety

Row 3

Evidence source

Incident investigations

What it shows

Where controls failed or were missing.

Management response

Update assessments and standards. HSG65 Managing for health and safety

Row 4

Evidence source

Health surveillance

What it shows

Early signs of work-related ill health.

Management response

Review exposure controls and role arrangements. HSG65 Managing for health and safety

Row 5

Evidence source

Management review

What it shows

Whether the whole system is effective.

Management response

Set resources, objectives and priorities. HSG65 Managing for health and safety

Read the complete comparison table
Monitoring and review examples
RowEvidence sourceWhat it showsManagement response
1InspectionsCondition of workplace and controls.Fix defects and identify repeated causes. HSG65 Managing for health and safety
2AuditsWhether the system matches requirements and field reality.Rank findings and verify action closure. HSG65 Managing for health and safety
3Incident investigationsWhere controls failed or were missing.Update assessments and standards. HSG65 Managing for health and safety
4Health surveillanceEarly signs of work-related ill health.Review exposure controls and role arrangements. HSG65 Managing for health and safety
5Management reviewWhether the whole system is effective.Set resources, objectives and priorities. HSG65 Managing for health and safety
Management system records

Table ID: health-and-safety-management-systems-management-system-records

Source: https://www.sharehub.ltd/knowledge-hub/health-and-safety-management-systems.html Scope: Official source supports the management principle; example requires local verification.

Row 1

Record

Risk assessment

What it should prove

Significant risks and controls are understood.

Weak version

Generic document copied between tasks. HSG65 Managing for health and safety

Row 2

Record

Training record

What it should prove

Role competence is managed.

Weak version

Attendance only, no assessment. HSG65 Managing for health and safety

Row 3

Record

Inspection log

What it should prove

Controls are checked and defects escalated.

Weak version

Ticked without findings or action. HSG65 Managing for health and safety

Row 4

Record

Action tracker

What it should prove

Improvements are owned and verified.

Weak version

Closed by email without evidence. HSG65 Managing for health and safety

Row 5

Record

Management review

What it should prove

Leaders make decisions from evidence.

Weak version

Minutes with no actions. HSG65 Managing for health and safety

Read the complete comparison table
Management system records
RowRecordWhat it should proveWeak version
1Risk assessmentSignificant risks and controls are understood.Generic document copied between tasks. HSG65 Managing for health and safety
2Training recordRole competence is managed.Attendance only, no assessment. HSG65 Managing for health and safety
3Inspection logControls are checked and defects escalated.Ticked without findings or action. HSG65 Managing for health and safety
4Action trackerImprovements are owned and verified.Closed by email without evidence. HSG65 Managing for health and safety
5Management reviewLeaders make decisions from evidence.Minutes with no actions. HSG65 Managing for health and safety
Gb Ni Duties

Table ID: health-and-safety-management-systems-gb-ni-duties

Source: https://www.sharehub.ltd/knowledge-hub/health-and-safety-management-systems.html Scope: The row names the separate GB and NI instruments.

Row 1

Column 1

General duties

Column 2

GB Health and Safety at Work etc. Act 1974: protect employees and affected others. Instrument

Column 3

NI Health and Safety at Work Order 1978: separate NI general-duty route. Instrument

Row 2

Column 1

Assessment and arrangements

Column 2

GB Management Regulations 1999: assess risk and plan, organise, control, monitor and review. Instrument

Column 3

NI Management Regulations 2000: separate NI assessment and arrangements route. Instrument

Row 3

Column 1

Recognised union representatives

Column 2

GB Safety Representatives and Safety Committees Regulations 1977 where recognised-union representatives are appointed. Instrument

Column 3

NI Safety Representatives and Safety Committees Regulations 1979 for the NI route. Instrument

Row 4

Column 1

Other employee consultation

Column 2

GB Consultation with Employees Regulations 1996 where the union route does not cover workers. Instrument

Column 3

NI Consultation with Employees Regulations 1996 for the NI route. Instrument

Row 5

Column 1

Specified reports

Column 2

GB RIDDOR 2013 covers specified injuries, diseases and dangerous occurrences; ordinary near misses need internal learning. Instrument

Column 3

NI RIDDOR 1997 is separate; ordinary near misses are not automatically reportable. Instrument

Read the complete comparison table
Gb Ni Duties
RowColumn 1Column 2Column 3
1General dutiesGB Health and Safety at Work etc. Act 1974: protect employees and affected others. InstrumentNI Health and Safety at Work Order 1978: separate NI general-duty route. Instrument
2Assessment and arrangementsGB Management Regulations 1999: assess risk and plan, organise, control, monitor and review. InstrumentNI Management Regulations 2000: separate NI assessment and arrangements route. Instrument
3Recognised union representativesGB Safety Representatives and Safety Committees Regulations 1977 where recognised-union representatives are appointed. InstrumentNI Safety Representatives and Safety Committees Regulations 1979 for the NI route. Instrument
4Other employee consultationGB Consultation with Employees Regulations 1996 where the union route does not cover workers. InstrumentNI Consultation with Employees Regulations 1996 for the NI route. Instrument
5Specified reportsGB RIDDOR 2013 covers specified injuries, diseases and dangerous occurrences; ordinary near misses need internal learning. InstrumentNI RIDDOR 1997 is separate; ordinary near misses are not automatically reportable. Instrument
Source tables and records 2
Hierarchy Crossmap

Table ID: health-and-safety-management-systems-hierarchy-crossmap

Source: https://www.sharehub.ltd/knowledge-hub/health-and-safety-management-systems.html Scope: Illustrative decision; competent task and jurisdiction review remains necessary.

Row 1

Column 1

Eliminate

Column 2

Elimination

Column 3

Design surface-mounted containment or a preformed service route so no chase is cut.

Column 4

Designer approves route; project manager checks installed method.

Column 5

New layout holds work until checked. HSE concrete chasing and mortar raking

Row 2

Column 1

Reduce / substitute

Column 2

Substitution

Column 3

Select a compatible lower-dust board or prefabricated route where specification allows.

Column 4

Designer tests performance and new hazards.

Column 5

Unproved material fails release. HSE concrete chasing and mortar raking

Row 3

Column 1

Isolate

Column 2

Engineering

Column 3

Keep other trades out of the dust release path with a verified enclosure.

Column 4

Supervisor observes barrier and airflow.

Column 5

Dust escapes: stop cut. HSE concrete chasing and mortar raking

Row 4

Column 1

Control: physical

Column 2

Engineering

Column 3

Use suitable chaser and on-tool extraction for the actual material and depth.

Column 4

Maintainer tests capture; supervisor witnesses live cut.

Column 5

Failed capture: stop and repair. HSE concrete chasing and mortar raking

Row 5

Column 1

Control: method

Column 2

Administrative

Column 3

Schedule the work, limit cut length and prohibit dry sweeping.

Column 4

Supervisor checks work method in field.

Column 5

Changed task triggers reassessment. HSE concrete chasing and mortar raking

Row 6

Column 1

PPE

Column 2

PPE

Column 3

Select suitable fit-tested RPE for residual dust alongside extraction.

Column 4

Competent assessor verifies selection and fit.

Column 5

RPE cannot release failed extraction. HSE concrete chasing and mortar raking

Row 7

Column 1

Discipline

Column 2

Sustains controls

Column 3

Trend defects, review contractor feedback and close recurring fixes.

Column 4

Project manager checks field effectiveness.

Column 5

Repeat escape triggers redesign. HSE concrete chasing and mortar raking

Read the complete comparison table
Hierarchy Crossmap
RowColumn 1Column 2Column 3Column 4Column 5
1EliminateEliminationDesign surface-mounted containment or a preformed service route so no chase is cut.Designer approves route; project manager checks installed method.New layout holds work until checked. HSE concrete chasing and mortar raking
2Reduce / substituteSubstitutionSelect a compatible lower-dust board or prefabricated route where specification allows.Designer tests performance and new hazards.Unproved material fails release. HSE concrete chasing and mortar raking
3IsolateEngineeringKeep other trades out of the dust release path with a verified enclosure.Supervisor observes barrier and airflow.Dust escapes: stop cut. HSE concrete chasing and mortar raking
4Control: physicalEngineeringUse suitable chaser and on-tool extraction for the actual material and depth.Maintainer tests capture; supervisor witnesses live cut.Failed capture: stop and repair. HSE concrete chasing and mortar raking
5Control: methodAdministrativeSchedule the work, limit cut length and prohibit dry sweeping.Supervisor checks work method in field.Changed task triggers reassessment. HSE concrete chasing and mortar raking
6PPEPPESelect suitable fit-tested RPE for residual dust alongside extraction.Competent assessor verifies selection and fit.RPE cannot release failed extraction. HSE concrete chasing and mortar raking
7DisciplineSustains controlsTrend defects, review contractor feedback and close recurring fixes.Project manager checks field effectiveness.Repeat escape triggers redesign. HSE concrete chasing and mortar raking
Hierarchy Crossmap

Table ID: health-and-safety-management-systems-hierarchy-crossmap-eseap

Source: https://www.sharehub.ltd/knowledge-hub/health-and-safety-management-systems.html Scope: Illustrative decision; competent task and jurisdiction review remains necessary.

Row 1

Column 1

Elimination

Column 2

Elimination

Column 3

Design surface-mounted containment or a preformed service route so no chase is cut.

Column 4

Designer approves route; project manager checks installed method.

Column 5

New layout holds work until checked. HSE concrete chasing and mortar raking

Row 2

Column 1

Substitution

Column 2

Substitution

Column 3

Select a compatible lower-dust board or prefabricated route where specification allows.

Column 4

Designer tests performance and new hazards.

Column 5

Unproved material fails release. HSE concrete chasing and mortar raking

Row 3

Column 1

Engineering controls

Column 2

Engineering

Column 3

Keep other trades out of the dust release path with a verified enclosure.

Column 4

Supervisor observes barrier and airflow.

Column 5

Dust escapes: stop cut. HSE concrete chasing and mortar raking

Row 4

Column 1

Engineering controls

Column 2

Engineering

Column 3

Use suitable chaser and on-tool extraction for the actual material and depth.

Column 4

Maintainer tests capture; supervisor witnesses live cut.

Column 5

Failed capture: stop and repair. HSE concrete chasing and mortar raking

Row 5

Column 1

Administrative controls

Column 2

Administrative

Column 3

Schedule the work, limit cut length and prohibit dry sweeping.

Column 4

Supervisor checks work method in field.

Column 5

Changed task triggers reassessment. HSE concrete chasing and mortar raking

Row 6

Column 1

PPE

Column 2

PPE

Column 3

Select suitable fit-tested RPE for residual dust alongside extraction.

Column 4

Competent assessor verifies selection and fit.

Column 5

RPE cannot release failed extraction. HSE concrete chasing and mortar raking

Row 7

Column 1

Administrative controls

Column 2

Sustains controls

Column 3

Trend defects, review contractor feedback and close recurring fixes.

Column 4

Project manager checks field effectiveness.

Column 5

Repeat escape triggers redesign. HSE concrete chasing and mortar raking

Read the complete comparison table
Hierarchy Crossmap
RowColumn 1Column 2Column 3Column 4Column 5
1EliminationEliminationDesign surface-mounted containment or a preformed service route so no chase is cut.Designer approves route; project manager checks installed method.New layout holds work until checked. HSE concrete chasing and mortar raking
2SubstitutionSubstitutionSelect a compatible lower-dust board or prefabricated route where specification allows.Designer tests performance and new hazards.Unproved material fails release. HSE concrete chasing and mortar raking
3Engineering controlsEngineeringKeep other trades out of the dust release path with a verified enclosure.Supervisor observes barrier and airflow.Dust escapes: stop cut. HSE concrete chasing and mortar raking
4Engineering controlsEngineeringUse suitable chaser and on-tool extraction for the actual material and depth.Maintainer tests capture; supervisor witnesses live cut.Failed capture: stop and repair. HSE concrete chasing and mortar raking
5Administrative controlsAdministrativeSchedule the work, limit cut length and prohibit dry sweeping.Supervisor checks work method in field.Changed task triggers reassessment. HSE concrete chasing and mortar raking
6PPEPPESelect suitable fit-tested RPE for residual dust alongside extraction.Competent assessor verifies selection and fit.RPE cannot release failed extraction. HSE concrete chasing and mortar raking
7Administrative controlsSustains controlsTrend defects, review contractor feedback and close recurring fixes.Project manager checks field effectiveness.Repeat escape triggers redesign. HSE concrete chasing and mortar raking
BuildOut Ltd worked example

Table ID: health-and-safety-management-systems-buildout-ltd-worked-example

Source: https://www.sharehub.ltd/knowledge-hub/health-and-safety-management-systems.html Scope: Official source supports the management principle; example requires local verification.

Row 1

Management element

Assessing

How the business would manage it

Map significant risk areas and decide which need corporate standards, project controls and specialist review.

Evidence to review

Risk register and CDM project risk profile. HSE concrete chasing and mortar raking

Row 2

Management element

Analysing

How the business would manage it

Compare policy, project plans, RAMS, inspections, audits and incidents to see where the system drifts.

Evidence to review

Assurance dashboard and audit themes. HSE concrete chasing and mortar raking

Row 3

Management element

Implementing

How the business would manage it

Use project start-up gates, contractor onboarding, supervisor checklists and role-based competence requirements.

Evidence to review

CPP, induction records and supervisor standards. HSE concrete chasing and mortar raking

Row 4

Management element

Checking

How the business would manage it

Use site inspections, management-system audits and independent specialist reviews classified by the function directing them for high-risk work.

Evidence to review

Inspection data, audit reports and expert reviews. HSE concrete chasing and mortar raking

Row 5

Management element

Learning

How the business would manage it

Convert incidents, near misses and repeat findings into changes to standards, procurement and training.

Evidence to review

Learning log and revised procedures. HSE concrete chasing and mortar raking

Row 6

Management element

Improving

How the business would manage it

Review performance with directors and resource recurring weaknesses such as dust control or contractor supervision.

Evidence to review

Management review actions and verified closure. HSE concrete chasing and mortar raking

Read the complete comparison table
BuildOut Ltd worked example
RowManagement elementHow the business would manage itEvidence to review
1AssessingMap significant risk areas and decide which need corporate standards, project controls and specialist review.Risk register and CDM project risk profile. HSE concrete chasing and mortar raking
2AnalysingCompare policy, project plans, RAMS, inspections, audits and incidents to see where the system drifts.Assurance dashboard and audit themes. HSE concrete chasing and mortar raking
3ImplementingUse project start-up gates, contractor onboarding, supervisor checklists and role-based competence requirements.CPP, induction records and supervisor standards. HSE concrete chasing and mortar raking
4CheckingUse site inspections, management-system audits and independent specialist reviews classified by the function directing them for high-risk work.Inspection data, audit reports and expert reviews. HSE concrete chasing and mortar raking
5LearningConvert incidents, near misses and repeat findings into changes to standards, procurement and training.Learning log and revised procedures. HSE concrete chasing and mortar raking
6ImprovingReview performance with directors and resource recurring weaknesses such as dust control or contractor supervision.Management review actions and verified closure. HSE concrete chasing and mortar raking
Sector Transfer

Table ID: health-and-safety-management-systems-sector-transfer

Source: https://www.sharehub.ltd/knowledge-hub/health-and-safety-management-systems.html Scope: Illustrative decision; competent task and jurisdiction review remains necessary.

Row 1

Column 1

Construction

Column 2

Concrete chasing exposes workers and other trades to respirable silica.

Column 3

System owner specifies no-chase design, supervisor checks live capture, and repeat defects feed procurement review; stop on failed capture. HSE concrete chasing and mortar raking

Row 2

Column 1

Fuel logistics

Column 2

Tank overfill can release fuel and form an ignitable vapour cloud.

Column 3

Process owner assigns independent protection, test evidence and change control; hold transfer on bypass. HSE Buncefield learning

Row 3

Column 1

Leisure

Column 2

Reversing delivery vehicle crosses a public entrance.

Column 3

Facilities owner maintains the separated route and reviews incident feedback; hold conflicting delivery. HSE separating pedestrians and vehicles

Read the complete comparison table
Sector Transfer
RowColumn 1Column 2Column 3
1ConstructionConcrete chasing exposes workers and other trades to respirable silica.System owner specifies no-chase design, supervisor checks live capture, and repeat defects feed procurement review; stop on failed capture. HSE concrete chasing and mortar raking
2Fuel logisticsTank overfill can release fuel and form an ignitable vapour cloud.Process owner assigns independent protection, test evidence and change control; hold transfer on bypass. HSE Buncefield learning
3LeisureReversing delivery vehicle crosses a public entrance.Facilities owner maintains the separated route and reviews incident feedback; hold conflicting delivery. HSE separating pedestrians and vehicles
Competence Matrix

Table ID: health-and-safety-management-systems-competence-matrix

Source: https://www.sharehub.ltd/knowledge-hub/health-and-safety-management-systems.html Scope: Illustrative decision; competent task and jurisdiction review remains necessary.

Row 1

Column 1

Construction worker

Column 2

Recognise dust escape, report it and hold the cut.

Column 3

Supervisor observes a real or simulated stop.

Column 4

Material or tool changes. HSE concrete chasing and mortar raking

Row 2

Column 1

Supervisor

Column 2

Verify on-tool capture and other-trade exclusion before release.

Column 3

Manager samples field check and defect hand-back.

Column 4

Failed extraction or new crew. HSE concrete chasing and mortar raking

Row 3

Column 1

Designer or purchaser

Column 2

Assess no-chase route and tool compatibility.

Column 3

Technical peer checks design and purchase record.

Column 4

Specification change. HSE concrete chasing and mortar raking

Row 4

Column 1

Project manager

Column 2

Resource repair and verify contractor controls across jobs.

Column 3

Director checks risk register and site evidence.

Column 4

Repeat defect or new contractor. HSG65 Managing for health and safety

Row 5

Column 1

System auditor or adviser

Column 2

Trace policy, risk and records to tested field capture.

Column 3

Independent competent reviewer samples evidence.

Column 4

Audit finding or legal update. HSE health and safety management systems

Read the complete comparison table
Competence Matrix
RowColumn 1Column 2Column 3Column 4
1Construction workerRecognise dust escape, report it and hold the cut.Supervisor observes a real or simulated stop.Material or tool changes. HSE concrete chasing and mortar raking
2SupervisorVerify on-tool capture and other-trade exclusion before release.Manager samples field check and defect hand-back.Failed extraction or new crew. HSE concrete chasing and mortar raking
3Designer or purchaserAssess no-chase route and tool compatibility.Technical peer checks design and purchase record.Specification change. HSE concrete chasing and mortar raking
4Project managerResource repair and verify contractor controls across jobs.Director checks risk register and site evidence.Repeat defect or new contractor. HSG65 Managing for health and safety
5System auditor or adviserTrace policy, risk and records to tested field capture.Independent competent reviewer samples evidence.Audit finding or legal update. HSE health and safety management systems
Management system warning signs

Table ID: health-and-safety-management-systems-management-system-warning-signs

Source: https://www.sharehub.ltd/knowledge-hub/health-and-safety-management-systems.html Scope: Official source supports the management principle; example requires local verification.

Row 1

Warning sign

Policy is not linked to arrangements

How harm can develop

Intent does not reach the work.

Action

Map policy commitments to procedures and evidence. HSE health and safety management systems

Row 2

Warning sign

Risk assessments are copied

How harm can develop

Controls do not match real work.

Action

Review with workers and field observation. HSE health and safety management systems

Row 3

Warning sign

Actions close without proof

How harm can develop

Weak controls remain.

Action

Require verification evidence. HSE health and safety management systems

Row 4

Warning sign

Certification is over-relied on

How harm can develop

Leaders stop challenging field reality.

Action

Audit high-risk controls and worker understanding. HSE health and safety management systems

Row 5

Warning sign

Management review is passive

How harm can develop

Repeat problems continue.

Action

Use trend data and assign strategic actions. HSE health and safety management systems

Row 6

Warning sign

Contractors sit outside the system

How harm can develop

Interfaces become uncontrolled.

Action

Integrate contractor standards and assurance. HSE health and safety management systems

Read the complete comparison table
Management system warning signs
RowWarning signHow harm can developAction
1Policy is not linked to arrangementsIntent does not reach the work.Map policy commitments to procedures and evidence. HSE health and safety management systems
2Risk assessments are copiedControls do not match real work.Review with workers and field observation. HSE health and safety management systems
3Actions close without proofWeak controls remain.Require verification evidence. HSE health and safety management systems
4Certification is over-relied onLeaders stop challenging field reality.Audit high-risk controls and worker understanding. HSE health and safety management systems
5Management review is passiveRepeat problems continue.Use trend data and assign strategic actions. HSE health and safety management systems
6Contractors sit outside the systemInterfaces become uncontrolled.Integrate contractor standards and assurance. HSE health and safety management systems
Related SHARE pages

Table ID: health-and-safety-management-systems-related-share-pages

Source: https://www.sharehub.ltd/knowledge-hub/health-and-safety-management-systems.html Scope: Official source supports the management principle; example requires local verification.

Row 1

Related page

Health and Safety Policy

Why it helps

Explains the policy structure and keeping it current.

Row 2

Related page

Health and Safety Leadership and Influence

Why it helps

Explains leadership, resources and trust.

Row 3

Related page

Health and Safety Auditing

Why it helps

Explains evidence sampling and assurance.

Row 4

Related page

Health and Safety Performance Monitoring, Measuring, Review and Audit

Why it helps

Explains indicators and management review.

Row 5

Related page

Health and Safety Regulations in the UK

Why it helps

Explains the legal framework behind management arrangements.

Read the complete comparison table
Related SHARE pages
RowRelated pageWhy it helps
1Health and Safety PolicyExplains the policy structure and keeping it current.
2Health and Safety Leadership and InfluenceExplains leadership, resources and trust.
3Health and Safety AuditingExplains evidence sampling and assurance.
4Health and Safety Performance Monitoring, Measuring, Review and AuditExplains indicators and management review.
5Health and Safety Regulations in the UKExplains the legal framework behind management arrangements.
Official Links

Table ID: health-and-safety-management-systems-official-links

Source: https://www.sharehub.ltd/knowledge-hub/health-and-safety-management-systems.html Scope: Guidance and standards are not law; each row states its scope.

Row 1

Column 1

UK legislation

Column 2

Health and Safety at Work etc. Act 1974

Column 3

Great Britain

Column 4

General work-health and safety duties

Column 5

1974, as amended

Row 2

Column 1

UK legislation

Column 2

Health and Safety at Work (NI) Order 1978

Column 3

Northern Ireland

Column 4

NI general work-health and safety duties

Column 5

1978, as amended

Row 3

Column 1

UK legislation

Column 2

Management of Health and Safety at Work Regulations 1999

Column 3

Great Britain

Column 4

GB assessment and management arrangements

Column 5

1999, as amended

Row 4

Column 1

UK legislation

Column 2

Management of Health and Safety at Work Regulations (NI) 2000

Column 3

Northern Ireland

Column 4

NI assessment and management arrangements

Column 5

2000, as amended

Row 5

Column 1

UK legislation

Column 2

Safety Representatives and Safety Committees Regulations 1977

Column 3

Great Britain

Column 4

GB recognised union representative consultation

Column 5

1977, as amended

Row 6

Column 1

UK legislation

Column 2

Safety Representatives and Safety Committees Regulations (NI) 1979

Column 3

Northern Ireland

Column 4

NI recognised union representative consultation

Column 5

1979, as amended

Row 7

Column 1

UK legislation

Column 2

Health and Safety (Consultation with Employees) Regulations 1996

Column 3

Great Britain

Column 4

GB consultation with other employees

Column 5

1996, as amended

Row 8

Column 1

UK legislation

Column 2

Health and Safety (Consultation with Employees) Regulations (NI) 1996

Column 3

Northern Ireland

Column 4

NI consultation with other employees

Column 5

1996, as amended

Row 9

Column 1

UK legislation

Column 2

Reporting of Injuries, Diseases and Dangerous Occurrences Regulations 2013

Column 3

Great Britain

Column 4

Specified GB reportable events

Column 5

2013, as amended

Row 10

Column 1

UK legislation

Column 2

Reporting of Injuries, Diseases and Dangerous Occurrences Regulations (NI) 1997

Column 3

Northern Ireland

Column 4

Specified NI reportable events

Column 5

1997, as amended

Row 11

Column 1

HSE

Column 2

HSE managing health and safety

Column 3

Great Britain

Column 4

Plan, Do, Check, Act and risk-management arrangements

Column 5

Current guidance

Row 12

Column 1

HSE

Column 2

HSE health and safety management systems

Column 3

Great Britain

Column 4

Formal system is not a legal requirement; control and proportionate documentation matter

Column 5

Current guidance

Row 13

Column 1

HSE

Column 2

HSG65 Managing for health and safety

Column 3

Great Britain

Column 4

Plan, Do, Check, Act management

Column 5

Current public edition

Row 14

Column 1

HSE

Column 2

HSE management-system and ISO 45001 advice

Column 3

Great Britain

Column 4

Real-world risk control beyond certification

Column 5

Current guidance

Row 15

Column 1

HSE

Column 2

HSE health and safety management systems

Column 3

Great Britain

Column 4

HSE explains how ISO 45001 can be used proportionately; law and working controls remain the test

Column 5

Current guidance

Row 16

Column 1

HSE

Column 2

HSE five-level hierarchy

Column 3

Great Britain

Column 4

Elimination, substitution, engineering, administrative, PPE order

Column 5

Current guidance

Row 17

Column 1

HSE

Column 2

HSE consulting and involving workers

Column 3

Great Britain

Column 4

GB consultation and worker voice

Column 5

Current guidance

Row 18

Column 1

HSENI

Column 2

HSENI trade-union representatives and consultation

Column 3

Northern Ireland

Column 4

NI representative and direct consultation

Column 5

Current guidance

Row 19

Column 1

HSE

Column 2

HSE prepare a health and safety policy

Column 3

Great Britain

Column 4

GB policy, three parts, five-employee written threshold and communication

Column 5

Current guidance

Row 20

Column 1

HSENI

Column 2

HSENI health and safety policy

Column 3

Northern Ireland

Column 4

NI policy, three parts and five-employee written threshold

Column 5

Current guidance

Row 21

Column 1

HSE

Column 2

HSE concrete chasing and mortar raking

Column 3

Great Britain

Column 4

Eliminate dusty chasing where possible; on-tool extraction and residual RPE

Column 5

Current guidance

Row 22

Column 1

HSE

Column 2

HSE silica cancer and lung-disease risk

Column 3

Great Britain

Column 4

Silicosis, COPD and lung-cancer harm from respirable silica

Column 5

Current guidance

Row 23

Column 1

HSE

Column 2

HSE large-tank high-level-switch safety alert

Column 3

Great Britain

Column 4

Specific large-tank switch installation and test risks; device scope must be checked

Column 5

HID 6-2010; updated 2025

Row 24

Column 1

HSE

Column 2

HSE Buncefield learning

Column 3

Great Britain

Column 4

Fuel overfill, vapour cloud, explosion and major-accident learning

Column 5

Incident learning

Row 25

Column 1

HSE

Column 2

HSE separating pedestrians and vehicles

Column 3

Great Britain

Column 4

Physical separation for pedestrian and vehicle collision prevention

Column 5

Current guidance

Row 26

Column 1

HSE

Column 2

INDG417 Leading health and safety at work

Column 3

Great Britain

Column 4

Directors and boards: leadership, involvement and review

Column 5

Revision 1, June 2013

Read the complete comparison table
Official Links
RowColumn 1Column 2Column 3Column 4Column 5
1UK legislationHealth and Safety at Work etc. Act 1974Great BritainGeneral work-health and safety duties1974, as amended
2UK legislationHealth and Safety at Work (NI) Order 1978Northern IrelandNI general work-health and safety duties1978, as amended
3UK legislationManagement of Health and Safety at Work Regulations 1999Great BritainGB assessment and management arrangements1999, as amended
4UK legislationManagement of Health and Safety at Work Regulations (NI) 2000Northern IrelandNI assessment and management arrangements2000, as amended
5UK legislationSafety Representatives and Safety Committees Regulations 1977Great BritainGB recognised union representative consultation1977, as amended
6UK legislationSafety Representatives and Safety Committees Regulations (NI) 1979Northern IrelandNI recognised union representative consultation1979, as amended
7UK legislationHealth and Safety (Consultation with Employees) Regulations 1996Great BritainGB consultation with other employees1996, as amended
8UK legislationHealth and Safety (Consultation with Employees) Regulations (NI) 1996Northern IrelandNI consultation with other employees1996, as amended
9UK legislationReporting of Injuries, Diseases and Dangerous Occurrences Regulations 2013Great BritainSpecified GB reportable events2013, as amended
10UK legislationReporting of Injuries, Diseases and Dangerous Occurrences Regulations (NI) 1997Northern IrelandSpecified NI reportable events1997, as amended
11HSEHSE managing health and safetyGreat BritainPlan, Do, Check, Act and risk-management arrangementsCurrent guidance
12HSEHSE health and safety management systemsGreat BritainFormal system is not a legal requirement; control and proportionate documentation matterCurrent guidance
13HSEHSG65 Managing for health and safetyGreat BritainPlan, Do, Check, Act managementCurrent public edition
14HSEHSE management-system and ISO 45001 adviceGreat BritainReal-world risk control beyond certificationCurrent guidance
15HSEHSE health and safety management systemsGreat BritainHSE explains how ISO 45001 can be used proportionately; law and working controls remain the testCurrent guidance
16HSEHSE five-level hierarchyGreat BritainElimination, substitution, engineering, administrative, PPE orderCurrent guidance
17HSEHSE consulting and involving workersGreat BritainGB consultation and worker voiceCurrent guidance
18HSENIHSENI trade-union representatives and consultationNorthern IrelandNI representative and direct consultationCurrent guidance
19HSEHSE prepare a health and safety policyGreat BritainGB policy, three parts, five-employee written threshold and communicationCurrent guidance
20HSENIHSENI health and safety policyNorthern IrelandNI policy, three parts and five-employee written thresholdCurrent guidance
21HSEHSE concrete chasing and mortar rakingGreat BritainEliminate dusty chasing where possible; on-tool extraction and residual RPECurrent guidance
22HSEHSE silica cancer and lung-disease riskGreat BritainSilicosis, COPD and lung-cancer harm from respirable silicaCurrent guidance
23HSEHSE large-tank high-level-switch safety alertGreat BritainSpecific large-tank switch installation and test risks; device scope must be checkedHID 6-2010; updated 2025
24HSEHSE Buncefield learningGreat BritainFuel overfill, vapour cloud, explosion and major-accident learningIncident learning
25HSEHSE separating pedestrians and vehiclesGreat BritainPhysical separation for pedestrian and vehicle collision preventionCurrent guidance
26HSEINDG417 Leading health and safety at workGreat BritainDirectors and boards: leadership, involvement and reviewRevision 1, June 2013
Acronyms and meanings

Table ID: health-and-safety-management-systems-acronyms-and-meanings

Source: https://www.sharehub.ltd/knowledge-hub/health-and-safety-management-systems.html Scope: Official source supports the management principle; example requires local verification.

Row 1

Acronym

PDCA

Meaning

Plan, Do, Check, Act

Plain english use

Continuous improvement cycle used by HSE and management systems.

Row 2

Acronym

HSG65

Meaning

Managing for health and safety

Plain english use

HSE management system guidance book.

Row 3

Acronym

ISO

Meaning

International Organization for Standardization

Plain english use

Publisher of ISO 45001 and other standards.

Row 4

Acronym

OH&S

Meaning

Occupational Health and Safety

Plain english use

Term used in ISO 45001.

Row 5

Acronym

NGC

Meaning

IOSH National General Certificate

Plain english use

IOSH qualification context; SHARE learning support for management systems and practical evidence.

Read the complete comparison table
Acronyms and meanings
RowAcronymMeaningPlain english use
1PDCAPlan, Do, Check, ActContinuous improvement cycle used by HSE and management systems.
2HSG65Managing for health and safetyHSE management system guidance book.
3ISOInternational Organization for StandardizationPublisher of ISO 45001 and other standards.
4OH&SOccupational Health and SafetyTerm used in ISO 45001.
5NGCIOSH National General CertificateIOSH qualification context; SHARE learning support for management systems and practical evidence.
Individual editable BuildOut documents

Table ID: health-and-safety-management-systems-buildout-documents

Source: https://www.sharehub.ltd/knowledge-hub/health-and-safety-management-systems.html

Row 1

Document

Governance, document change and review procedureBOUK-PRO-GOV · Completed fictional example · v1.0

Purpose

Approve documents, assign owners, control versions and evaluate management performance.

Editable download

Download DOCXRead preview

Row 2

Document

Legal and other requirements registerBOUK-REG-GOV-01 · Blank register with separate fictional worked entries · v1.1

Purpose

A detailed GB construction legal baseline with 142 requirement entries, environmental permits and consents, national overlays and eight completed fictional decisions, plus a blank live register.

Editable download

Download XLSXRead preview

Row 3

Document

Document and records control registerBOUK-REG-GOV-02 · Blank register with separate fictional worked entries · v1.0

Purpose

Control IDs, revisions, approvals, access, retention and withdrawn copies.

Editable download

Download XLSXRead preview

Row 4

Document

Annual health and safety objectives and resources planBOUK-PLN-GOV-01 · Completed fictional example · v1.0

Purpose

Set measurable objectives, owners and resources based on risks and performance.

Editable download

Download DOCXRead preview

Row 5

Document

Management review and improvement decision recordBOUK-FRM-GOV-01 · Blank editable master · v1.0

Purpose

Record review inputs, decisions, resources, actions and follow-up.

Editable download

Download DOCXRead preview

Row 6

Document

Management-of-change assessmentBOUK-FRM-GOV-02 · Blank editable master · v1.0

Purpose

Assess new work, equipment, workforce or sequencing before approval.

Editable download

Download DOCXRead preview

Row 7

Document

Dutyholder and responsibility appointment recordBOUK-FRM-GOV-03 · Blank editable master · v1.0

Purpose

Make role, competence, authority, interfaces and acceptance explicit.

Editable download

Download DOCXRead preview

Row 8

Document

Employers liability insurance and statutory information registerBOUK-REG-GOV-03 · Blank register with separate fictional worked entries · v1.0

Purpose

Track insurance cover/certificate accessibility and required health and safety information for employees.

Editable download

Download XLSXRead preview

Read the complete comparison table
Individual editable BuildOut documents
RowDocumentPurposeEditable download
1Governance, document change and review procedureBOUK-PRO-GOV · Completed fictional example · v1.0Approve documents, assign owners, control versions and evaluate management performance.Download DOCXRead preview
2Legal and other requirements registerBOUK-REG-GOV-01 · Blank register with separate fictional worked entries · v1.1A detailed GB construction legal baseline with 142 requirement entries, environmental permits and consents, national overlays and eight completed fictional decisions, plus a blank live register.Download XLSXRead preview
3Document and records control registerBOUK-REG-GOV-02 · Blank register with separate fictional worked entries · v1.0Control IDs, revisions, approvals, access, retention and withdrawn copies.Download XLSXRead preview
4Annual health and safety objectives and resources planBOUK-PLN-GOV-01 · Completed fictional example · v1.0Set measurable objectives, owners and resources based on risks and performance.Download DOCXRead preview
5Management review and improvement decision recordBOUK-FRM-GOV-01 · Blank editable master · v1.0Record review inputs, decisions, resources, actions and follow-up.Download DOCXRead preview
6Management-of-change assessmentBOUK-FRM-GOV-02 · Blank editable master · v1.0Assess new work, equipment, workforce or sequencing before approval.Download DOCXRead preview
7Dutyholder and responsibility appointment recordBOUK-FRM-GOV-03 · Blank editable master · v1.0Make role, competence, authority, interfaces and acceptance explicit.Download DOCXRead preview
8Employers liability insurance and statutory information registerBOUK-REG-GOV-03 · Blank register with separate fictional worked entries · v1.0Track insurance cover/certificate accessibility and required health and safety information for employees.Download XLSXRead preview
Policy questions

Table ID: health-and-safety-policy-policy-questions

Source: https://www.sharehub.ltd/knowledge-hub/health-and-safety-policy.html Scope: Official source supports the management principle; example requires local verification.

Row 1

Question

What is our commitment?

Good answer

Prevent harm and manage significant risks proportionately.

Weak answer

Safety is our top priority. HSE prepare a health and safety policy

Row 2

Question

Who is responsible?

Good answer

Named roles with authority and duties.

Weak answer

Everyone is responsible. HSE prepare a health and safety policy

Row 3

Question

How will we do it?

Good answer

Risk assessment, competence, controls, monitoring and review.

Weak answer

Follow procedures. HSE prepare a health and safety policy

Row 4

Question

How will people know?

Good answer

Briefing, induction, consultation and accessible copies.

Weak answer

Policy is on the intranet. HSE prepare a health and safety policy

Row 5

Question

How will it improve?

Good answer

Objectives, audits, incident learning and management review.

Weak answer

Annual signature only. HSE prepare a health and safety policy

Read the complete comparison table
Policy questions
RowQuestionGood answerWeak answer
1What is our commitment?Prevent harm and manage significant risks proportionately.Safety is our top priority. HSE prepare a health and safety policy
2Who is responsible?Named roles with authority and duties.Everyone is responsible. HSE prepare a health and safety policy
3How will we do it?Risk assessment, competence, controls, monitoring and review.Follow procedures. HSE prepare a health and safety policy
4How will people know?Briefing, induction, consultation and accessible copies.Policy is on the intranet. HSE prepare a health and safety policy
5How will it improve?Objectives, audits, incident learning and management review.Annual signature only. HSE prepare a health and safety policy
Source tables and records 3
Policy legal requirements in practical terms

Table ID: health-and-safety-policy-policy-legal-requirements-in-practical-terms

Source: https://www.sharehub.ltd/knowledge-hub/health-and-safety-policy.html Scope: Official source supports the management principle; example requires local verification.

Row 1

Requirement

Have a policy

Practical meaning

The employer has a clear approach to managing health and safety.

Evidence

Policy document or stated arrangements. HSE prepare a health and safety policy

Row 2

Requirement

Write it down if five or more employees

Practical meaning

Formal written record is required.

Evidence

Signed and dated policy. HSE prepare a health and safety policy HSENI health and safety policy

Row 3

Requirement

Share it with employees

Practical meaning

Workers know what applies and what changed.

Evidence

Induction, briefing and accessible copy. HSE prepare a health and safety policy

Row 4

Requirement

State responsibilities

Practical meaning

People know who does what.

Evidence

Role table and management structure. HSE prepare a health and safety policy

Row 5

Requirement

Keep it current

Practical meaning

Policy reflects current work and risk.

Evidence

Review record and change log. HSE prepare a health and safety policy

Read the complete comparison table
Policy legal requirements in practical terms
RowRequirementPractical meaningEvidence
1Have a policyThe employer has a clear approach to managing health and safety.Policy document or stated arrangements. HSE prepare a health and safety policy
2Write it down if five or more employeesFormal written record is required.Signed and dated policy. HSE prepare a health and safety policy HSENI health and safety policy
3Share it with employeesWorkers know what applies and what changed.Induction, briefing and accessible copy. HSE prepare a health and safety policy
4State responsibilitiesPeople know who does what.Role table and management structure. HSE prepare a health and safety policy
5Keep it currentPolicy reflects current work and risk.Review record and change log. HSE prepare a health and safety policy
Three-part policy structure

Table ID: health-and-safety-policy-three-part-policy-structure

Source: https://www.sharehub.ltd/knowledge-hub/health-and-safety-policy.html Scope: Official source supports the management principle; example requires local verification.

Row 1

Policy part

Statement of intent

Purpose

Sets commitment and aims.

Example content

Signed commitment to prevent injury and ill health. HSE prepare a health and safety policy

Row 2

Policy part

Responsibilities

Purpose

Names roles and accountabilities.

Example content

Director, managers, supervisors, workers and advisers. HSE prepare a health and safety policy

Row 3

Policy part

Arrangements

Purpose

Explains how the aims are achieved.

Example content

Risk assessment, training, consultation, contractors, emergency, monitoring and review. HSE prepare a health and safety policy

Read the complete comparison table
Three-part policy structure
RowPolicy partPurposeExample content
1Statement of intentSets commitment and aims.Signed commitment to prevent injury and ill health. HSE prepare a health and safety policy
2ResponsibilitiesNames roles and accountabilities.Director, managers, supervisors, workers and advisers. HSE prepare a health and safety policy
3ArrangementsExplains how the aims are achieved.Risk assessment, training, consultation, contractors, emergency, monitoring and review. HSE prepare a health and safety policy
Mini policy example

Table ID: health-and-safety-policy-mini-policy-example

Source: https://www.sharehub.ltd/knowledge-hub/health-and-safety-policy.html Scope: Official source supports the management principle; example requires local verification.

Row 1

Policy part

Statement of intent

Example wording

We will prevent work-related injury and ill health by identifying significant risks, providing competent people and resources, consulting workers and reviewing performance.

Why it works

It names prevention, resources, consultation and review rather than using a slogan. HSE prepare a health and safety policy

Row 2

Policy part

Responsibilities

Example wording

The managing director owns the policy and review. Managers implement arrangements. Supervisors verify controls. Workers follow controls and report defects. The HSE adviser supports and escalates concerns.

Why it works

It makes roles and authority visible. HSE prepare a health and safety policy

Row 3

Policy part

Arrangements

Example wording

We will use risk assessment, contractor control, training, emergency planning, inspection, audit, incident learning and management review to manage our significant risks.

Why it works

It points to the system elements that make the policy real. HSE prepare a health and safety policy

Row 4

Policy part

Objectives

Example wording

We will reduce high-risk manual handling tasks by introducing mechanical aids and verifying use through supervisor checks by 31 December.

Why it works

It shows a SMART improvement linked to a real risk. HSE prepare a health and safety policy

Row 5

Policy part

Review

Example wording

This policy will be reviewed annually and after significant change, incident findings, audit findings or legal/guidance updates.

Why it works

It avoids the policy becoming stale. HSE prepare a health and safety policy

Read the complete comparison table
Mini policy example
RowPolicy partExample wordingWhy it works
1Statement of intentWe will prevent work-related injury and ill health by identifying significant risks, providing competent people and resources, consulting workers and reviewing performance.It names prevention, resources, consultation and review rather than using a slogan. HSE prepare a health and safety policy
2ResponsibilitiesThe managing director owns the policy and review. Managers implement arrangements. Supervisors verify controls. Workers follow controls and report defects. The HSE adviser supports and escalates concerns.It makes roles and authority visible. HSE prepare a health and safety policy
3ArrangementsWe will use risk assessment, contractor control, training, emergency planning, inspection, audit, incident learning and management review to manage our significant risks.It points to the system elements that make the policy real. HSE prepare a health and safety policy
4ObjectivesWe will reduce high-risk manual handling tasks by introducing mechanical aids and verifying use through supervisor checks by 31 December.It shows a SMART improvement linked to a real risk. HSE prepare a health and safety policy
5ReviewThis policy will be reviewed annually and after significant change, incident findings, audit findings or legal/guidance updates.It avoids the policy becoming stale. HSE prepare a health and safety policy
Statement of intent quality

Table ID: health-and-safety-policy-statement-of-intent-quality

Source: https://www.sharehub.ltd/knowledge-hub/health-and-safety-policy.html Scope: Official source supports the management principle; example requires local verification.

Row 1

Element

Commitment

Good wording approach

Specific commitment to manage risk and prevent harm.

Weak wording

Safety first slogan. HSE prepare a health and safety policy

Row 2

Element

Scope

Good wording approach

Covers employees, contractors, visitors and others affected.

Weak wording

Employees only. HSE prepare a health and safety policy

Row 3

Element

Leadership

Good wording approach

Most senior person signs and owns review.

Weak wording

Unsigned generic template. HSE prepare a health and safety policy

Row 4

Element

Resources

Good wording approach

Acknowledges need for competent people, time and controls.

Weak wording

No link to resources. HSE prepare a health and safety policy

Row 5

Element

Review

Good wording approach

States regular and change-triggered review.

Weak wording

Review when convenient. HSE prepare a health and safety policy

Read the complete comparison table
Statement of intent quality
RowElementGood wording approachWeak wording
1CommitmentSpecific commitment to manage risk and prevent harm.Safety first slogan. HSE prepare a health and safety policy
2ScopeCovers employees, contractors, visitors and others affected.Employees only. HSE prepare a health and safety policy
3LeadershipMost senior person signs and owns review.Unsigned generic template. HSE prepare a health and safety policy
4ResourcesAcknowledges need for competent people, time and controls.No link to resources. HSE prepare a health and safety policy
5ReviewStates regular and change-triggered review.Review when convenient. HSE prepare a health and safety policy
Responsibility examples

Table ID: health-and-safety-policy-responsibility-examples

Source: https://www.sharehub.ltd/knowledge-hub/health-and-safety-policy.html Scope: Official source supports the management principle; example requires local verification.

Row 1

Role

Director

Responsibility

Set policy, resources and review performance.

Evidence

Management review minutes. HSE prepare a health and safety policy

Row 2

Role

Manager

Responsibility

Implement arrangements and close actions.

Evidence

Action tracker and team briefings. HSE prepare a health and safety policy

Row 3

Role

Supervisor

Responsibility

Verify controls during work and escalate defects.

Evidence

Inspection and briefing records. HSE prepare a health and safety policy

Row 4

Role

Worker

Responsibility

Follow controls, report defects and cooperate.

Evidence

Reports, observations and training. HSE prepare a health and safety policy

Row 5

Role

HSE adviser

Responsibility

Advise, support, monitor and escalate within competence.

Evidence

Audit reports and advice records. HSE prepare a health and safety policy

Row 6

Role

Contractor

Responsibility

Follow site rules and coordinate risk.

Evidence

RAMS, permits and supervision records. HSE prepare a health and safety policy

Read the complete comparison table
Responsibility examples
RowRoleResponsibilityEvidence
1DirectorSet policy, resources and review performance.Management review minutes. HSE prepare a health and safety policy
2ManagerImplement arrangements and close actions.Action tracker and team briefings. HSE prepare a health and safety policy
3SupervisorVerify controls during work and escalate defects.Inspection and briefing records. HSE prepare a health and safety policy
4WorkerFollow controls, report defects and cooperate.Reports, observations and training. HSE prepare a health and safety policy
5HSE adviserAdvise, support, monitor and escalate within competence.Audit reports and advice records. HSE prepare a health and safety policy
6ContractorFollow site rules and coordinate risk.RAMS, permits and supervision records. HSE prepare a health and safety policy
Policy arrangement topics

Table ID: health-and-safety-policy-policy-arrangement-topics

Source: https://www.sharehub.ltd/knowledge-hub/health-and-safety-policy.html Scope: Official source supports the management principle; example requires local verification.

Row 1

Arrangement

Risk assessment

What it should cover

How risks are assessed, recorded and reviewed.

Evidence

Assessment register. HSE separating pedestrians and vehicles

Row 2

Arrangement

Competence and training

What it should cover

Role requirements, assessment and refresher training.

Evidence

Training matrix and competence checks. HSE separating pedestrians and vehicles

Row 3

Arrangement

Consultation

What it should cover

Worker involvement routes and feedback.

Evidence

Committee notes and action tracker. HSE separating pedestrians and vehicles

Row 4

Arrangement

Contractors

What it should cover

Selection, onboarding, supervision and review.

Evidence

Prequalification and site monitoring. HSE separating pedestrians and vehicles

Row 5

Arrangement

Emergency arrangements

What it should cover

Fire, first aid, evacuation and serious events.

Evidence

Plans, drills and equipment checks. HSE separating pedestrians and vehicles

Row 6

Arrangement

Monitoring and audit

What it should cover

Inspections, indicators, audits and management review.

Evidence

Monitoring schedule and audit reports. HSE separating pedestrians and vehicles

Read the complete comparison table
Policy arrangement topics
RowArrangementWhat it should coverEvidence
1Risk assessmentHow risks are assessed, recorded and reviewed.Assessment register. HSE separating pedestrians and vehicles
2Competence and trainingRole requirements, assessment and refresher training.Training matrix and competence checks. HSE separating pedestrians and vehicles
3ConsultationWorker involvement routes and feedback.Committee notes and action tracker. HSE separating pedestrians and vehicles
4ContractorsSelection, onboarding, supervision and review.Prequalification and site monitoring. HSE separating pedestrians and vehicles
5Emergency arrangementsFire, first aid, evacuation and serious events.Plans, drills and equipment checks. HSE separating pedestrians and vehicles
6Monitoring and auditInspections, indicators, audits and management review.Monitoring schedule and audit reports. HSE separating pedestrians and vehicles
SMART objective examples

Table ID: health-and-safety-policy-smart-objective-examples

Source: https://www.sharehub.ltd/knowledge-hub/health-and-safety-policy.html Scope: Official source supports the management principle; example requires local verification.

Row 1

Weak objective

Improve safety culture.

Stronger smart objective

Close 90% of worker concern actions within agreed risk-based timescales by quarter end.

Why stronger

Measurable and linked to trust. HSG65 Managing for health and safety

Row 2

Weak objective

Reduce accidents.

Stronger smart objective

Reduce high-risk manual handling tasks by 30% through mechanical aids by December.

Why stronger

Focuses on risk reduction. HSG65 Managing for health and safety

Row 3

Weak objective

Do more training.

Stronger smart objective

Assess all supervisors on permit handback verification by 30 September.

Why stronger

Checks competence, not attendance. HSG65 Managing for health and safety

Row 4

Weak objective

Improve contractors.

Stronger smart objective

Audit the next five high-risk contractor jobs against mobilisation and supervision standards.

Why stronger

Tests the system in real work. HSG65 Managing for health and safety

Read the complete comparison table
SMART objective examples
RowWeak objectiveStronger smart objectiveWhy stronger
1Improve safety culture.Close 90% of worker concern actions within agreed risk-based timescales by quarter end.Measurable and linked to trust. HSG65 Managing for health and safety
2Reduce accidents.Reduce high-risk manual handling tasks by 30% through mechanical aids by December.Focuses on risk reduction. HSG65 Managing for health and safety
3Do more training.Assess all supervisors on permit handback verification by 30 September.Checks competence, not attendance. HSG65 Managing for health and safety
4Improve contractors.Audit the next five high-risk contractor jobs against mobilisation and supervision standards.Tests the system in real work. HSG65 Managing for health and safety
Policy communication methods

Table ID: health-and-safety-policy-policy-communication-methods

Source: https://www.sharehub.ltd/knowledge-hub/health-and-safety-policy.html Scope: Official source supports the management principle; example requires local verification.

Row 1

Method

Induction

Best used for

New starters and contractors.

Good practice

Explain role-specific arrangements. HSE prepare a health and safety policy

Row 2

Method

Team briefing

Best used for

Policy changes and local priorities.

Good practice

Use examples from the work. HSE prepare a health and safety policy

Row 3

Method

Noticeboards or intranet

Best used for

Reference and access.

Good practice

Keep current and easy to find. HSE prepare a health and safety policy

Row 4

Method

Consultation meetings

Best used for

Feedback and improvement.

Good practice

Record actions and respond. HSE prepare a health and safety policy

Row 5

Method

Supervisor conversations

Best used for

Task-level meaning.

Good practice

Translate policy into control checks. HSE prepare a health and safety policy

Read the complete comparison table
Policy communication methods
RowMethodBest used forGood practice
1InductionNew starters and contractors.Explain role-specific arrangements. HSE prepare a health and safety policy
2Team briefingPolicy changes and local priorities.Use examples from the work. HSE prepare a health and safety policy
3Noticeboards or intranetReference and access.Keep current and easy to find. HSE prepare a health and safety policy
4Consultation meetingsFeedback and improvement.Record actions and respond. HSE prepare a health and safety policy
5Supervisor conversationsTask-level meaning.Translate policy into control checks. HSE prepare a health and safety policy
Policy review triggers

Table ID: health-and-safety-policy-policy-review-triggers

Source: https://www.sharehub.ltd/knowledge-hub/health-and-safety-policy.html Scope: Official source supports the management principle; example requires local verification.

Row 1

Trigger

Business change

Why it matters

Roles and risks may change.

Example

New site, service or product. HSE prepare a health and safety policy

Row 2

Trigger

Incident or near miss

Why it matters

Policy arrangements may have failed.

Example

Investigation finds unclear responsibility. HSE prepare a health and safety policy

Row 3

Trigger

Audit finding

Why it matters

Evidence shows gap in arrangements.

Example

Contractor procedure not followed. HSE prepare a health and safety policy

Row 4

Trigger

Legal or guidance update

Why it matters

Duties or expectations may change.

Example

New or revised HSE guidance. HSE prepare a health and safety policy

Row 5

Trigger

Leadership change

Why it matters

Accountability and signature may need update.

Example

New managing director. HSE prepare a health and safety policy

Row 6

Trigger

Worker feedback

Why it matters

Arrangements may not fit real work.

Example

Supervisors lack time for checks. HSE prepare a health and safety policy

Read the complete comparison table
Policy review triggers
RowTriggerWhy it mattersExample
1Business changeRoles and risks may change.New site, service or product. HSE prepare a health and safety policy
2Incident or near missPolicy arrangements may have failed.Investigation finds unclear responsibility. HSE prepare a health and safety policy
3Audit findingEvidence shows gap in arrangements.Contractor procedure not followed. HSE prepare a health and safety policy
4Legal or guidance updateDuties or expectations may change.New or revised HSE guidance. HSE prepare a health and safety policy
5Leadership changeAccountability and signature may need update.New managing director. HSE prepare a health and safety policy
6Worker feedbackArrangements may not fit real work.Supervisors lack time for checks. HSE prepare a health and safety policy
Policy and procedure difference

Table ID: health-and-safety-policy-policy-and-procedure-difference

Source: https://www.sharehub.ltd/knowledge-hub/health-and-safety-policy.html Scope: Official source supports the management principle; example requires local verification.

Row 1

Document

Policy

Purpose

States commitment, responsibilities and arrangements.

Example

Health and safety policy. HSE prepare a health and safety policy

Row 2

Document

Standard

Purpose

Sets organisational rules for a topic.

Example

Contractor management standard. HSE prepare a health and safety policy

Row 3

Document

Procedure

Purpose

Explains how a process is carried out.

Example

Permit to work procedure. HSE prepare a health and safety policy

Row 4

Document

Risk assessment

Purpose

Identifies hazards and controls for specific work.

Example

COSHH or task assessment. HSE prepare a health and safety policy

Row 5

Document

Checklist

Purpose

Verifies key controls.

Example

Pre-use ladder check. HSE prepare a health and safety policy

Read the complete comparison table
Policy and procedure difference
RowDocumentPurposeExample
1PolicyStates commitment, responsibilities and arrangements.Health and safety policy. HSE prepare a health and safety policy
2StandardSets organisational rules for a topic.Contractor management standard. HSE prepare a health and safety policy
3ProcedureExplains how a process is carried out.Permit to work procedure. HSE prepare a health and safety policy
4Risk assessmentIdentifies hazards and controls for specific work.COSHH or task assessment. HSE prepare a health and safety policy
5ChecklistVerifies key controls.Pre-use ladder check. HSE prepare a health and safety policy
Policy evidence

Table ID: health-and-safety-policy-policy-evidence

Source: https://www.sharehub.ltd/knowledge-hub/health-and-safety-policy.html Scope: Official source supports the management principle; example requires local verification.

Row 1

Evidence

Signed current policy

What it proves

Leadership commitment and review.

What to challenge

Is it generic or current? HSE separating pedestrians and vehicles

Row 2

Evidence

Communication records

What it proves

Workers were told and changes shared.

What to challenge

Did people understand it? HSE separating pedestrians and vehicles

Row 3

Evidence

Responsibility matrix

What it proves

Ownership is clear.

What to challenge

Do role holders have authority? HSE separating pedestrians and vehicles

Row 4

Evidence

Arrangement records

What it proves

Policy links to real controls.

What to challenge

Are arrangements implemented? HSE separating pedestrians and vehicles

Row 5

Evidence

Audit findings

What it proves

Policy works or needs improvement.

What to challenge

Are findings closed with evidence? HSE separating pedestrians and vehicles

Row 6

Evidence

Management review

What it proves

Leaders act on performance.

What to challenge

Did review change decisions? HSE separating pedestrians and vehicles

Read the complete comparison table
Policy evidence
RowEvidenceWhat it provesWhat to challenge
1Signed current policyLeadership commitment and review.Is it generic or current? HSE separating pedestrians and vehicles
2Communication recordsWorkers were told and changes shared.Did people understand it? HSE separating pedestrians and vehicles
3Responsibility matrixOwnership is clear.Do role holders have authority? HSE separating pedestrians and vehicles
4Arrangement recordsPolicy links to real controls.Are arrangements implemented? HSE separating pedestrians and vehicles
5Audit findingsPolicy works or needs improvement.Are findings closed with evidence? HSE separating pedestrians and vehicles
6Management reviewLeaders act on performance.Did review change decisions? HSE separating pedestrians and vehicles
Policy weaknesses

Table ID: health-and-safety-policy-policy-weaknesses

Source: https://www.sharehub.ltd/knowledge-hub/health-and-safety-policy.html Scope: Official source supports the management principle; example requires local verification.

Row 1

Weakness

Copied template

Why it matters

Does not reflect actual work or responsibilities.

Better approach

Tailor to risk profile and roles. HSE prepare a health and safety policy

Row 2

Weakness

Responsibilities vague

Why it matters

People do not know what they own.

Better approach

Name roles, duties and evidence. HSE prepare a health and safety policy

Row 3

Weakness

Arrangements missing

Why it matters

Intent is not translated into action.

Better approach

Link to practical procedures and controls. HSE prepare a health and safety policy

Row 4

Weakness

Not shared

Why it matters

Workers cannot follow what they do not know.

Better approach

Communicate and brief changes. HSE prepare a health and safety policy

Row 5

Weakness

No review trigger

Why it matters

Policy becomes stale after change.

Better approach

Set review triggers and owners. HSE prepare a health and safety policy

Read the complete comparison table
Policy weaknesses
RowWeaknessWhy it mattersBetter approach
1Copied templateDoes not reflect actual work or responsibilities.Tailor to risk profile and roles. HSE prepare a health and safety policy
2Responsibilities vaguePeople do not know what they own.Name roles, duties and evidence. HSE prepare a health and safety policy
3Arrangements missingIntent is not translated into action.Link to practical procedures and controls. HSE prepare a health and safety policy
4Not sharedWorkers cannot follow what they do not know.Communicate and brief changes. HSE prepare a health and safety policy
5No review triggerPolicy becomes stale after change.Set review triggers and owners. HSE prepare a health and safety policy
Hierarchy Crossmap

Table ID: health-and-safety-policy-hierarchy-crossmap

Source: https://www.sharehub.ltd/knowledge-hub/health-and-safety-policy.html Scope: Illustrative decision; competent task and jurisdiction review remains necessary.

Row 1

Column 1

Eliminate

Column 2

Elimination

Column 3

Redesign access so deliveries drive through without reversing across the entrance.

Column 4

Estate owner verifies swept path and access.

Column 5

Unproved layout holds use. HSE separating pedestrians and vehicles

Row 2

Column 1

Reduce / substitute

Column 2

Substitution

Column 3

Test smaller vehicle and outside-zone transfer if through access is not feasible.

Column 4

Logistics manager assesses extra journeys and handling risks.

Column 5

No credit if conflict moves elsewhere. HSE separating pedestrians and vehicles

Row 3

Column 1

Isolate

Column 2

Engineering

Column 3

Use fixed pedestrian barriers and a separate accessible route.

Column 4

Facilities manager verifies route at busy time.

Column 5

Barrier gap: hold delivery. HSE separating pedestrians and vehicles

Row 4

Column 1

Control: physical

Column 2

Engineering

Column 3

Add designed gate and visibility aids after separation is secured.

Column 4

Facilities team tests gate and sight lines.

Column 5

Failed critical aid: hold. HSE separating pedestrians and vehicles

Row 5

Column 1

Control: method

Column 2

Administrative

Column 3

Book deliveries outside peak arrival and brief drivers on route.

Column 4

Supervisor observes first and changed delivery.

Column 5

Occupied route: stop movement. HSE separating pedestrians and vehicles

Row 6

Column 1

PPE

Column 2

PPE

Column 3

Use high-visibility clothing for authorised route workers; it cannot prevent impact.

Column 4

Supervisor checks issue.

Column 5

PPE cannot release failed separation. HSE separating pedestrians and vehicles

Row 7

Column 1

Discipline

Column 2

Sustains controls

Column 3

Review reports and repair gaps; update policy arrangements when layout or supplier changes.

Column 4

Manager checks action closure and field condition.

Column 5

Repeat conflict triggers redesign. HSE separating pedestrians and vehicles

Read the complete comparison table
Hierarchy Crossmap
RowColumn 1Column 2Column 3Column 4Column 5
1EliminateEliminationRedesign access so deliveries drive through without reversing across the entrance.Estate owner verifies swept path and access.Unproved layout holds use. HSE separating pedestrians and vehicles
2Reduce / substituteSubstitutionTest smaller vehicle and outside-zone transfer if through access is not feasible.Logistics manager assesses extra journeys and handling risks.No credit if conflict moves elsewhere. HSE separating pedestrians and vehicles
3IsolateEngineeringUse fixed pedestrian barriers and a separate accessible route.Facilities manager verifies route at busy time.Barrier gap: hold delivery. HSE separating pedestrians and vehicles
4Control: physicalEngineeringAdd designed gate and visibility aids after separation is secured.Facilities team tests gate and sight lines.Failed critical aid: hold. HSE separating pedestrians and vehicles
5Control: methodAdministrativeBook deliveries outside peak arrival and brief drivers on route.Supervisor observes first and changed delivery.Occupied route: stop movement. HSE separating pedestrians and vehicles
6PPEPPEUse high-visibility clothing for authorised route workers; it cannot prevent impact.Supervisor checks issue.PPE cannot release failed separation. HSE separating pedestrians and vehicles
7DisciplineSustains controlsReview reports and repair gaps; update policy arrangements when layout or supplier changes.Manager checks action closure and field condition.Repeat conflict triggers redesign. HSE separating pedestrians and vehicles
Riverside Leisure Ltd worked example

Table ID: health-and-safety-policy-riverside-leisure-ltd-worked-example

Source: https://www.sharehub.ltd/knowledge-hub/health-and-safety-policy.html Scope: Official source supports the management principle; example requires local verification.

Row 1

Management element

Assessing

How the business would manage it

Review activities, people affected, public interface, contractors and seasonal changes before updating policy arrangements.

Evidence to review

Risk profile and policy review notes. HSE separating pedestrians and vehicles

Row 2

Management element

Analysing

How the business would manage it

Compare incidents, customer complaints, audits and worker feedback to identify where responsibilities are unclear.

Evidence to review

Trend review and responsibility gap analysis. HSE separating pedestrians and vehicles

Row 3

Management element

Implementing

How the business would manage it

Brief managers and supervisors on policy responsibilities and link arrangements to pool safety, food hygiene, fire and safeguarding procedures.

Evidence to review

Briefing records and controlled procedures. HSE separating pedestrians and vehicles

Row 4

Management element

Checking

How the business would manage it

Audit whether teams know their responsibilities and whether arrangements are being used in live centres.

Evidence to review

Audit reports and field observations. HSE separating pedestrians and vehicles

Row 5

Management element

Learning

How the business would manage it

Use drill learning, slips, hygiene findings and contractor issues to update policy arrangements.

Evidence to review

Learning log and policy change record. HSE separating pedestrians and vehicles

Row 6

Management element

Improving

How the business would manage it

Set measurable objectives such as action closure, fire drill improvement, water safety checks and contractor audit completion.

Evidence to review

SMART objectives and management review. HSE separating pedestrians and vehicles

Read the complete comparison table
Riverside Leisure Ltd worked example
RowManagement elementHow the business would manage itEvidence to review
1AssessingReview activities, people affected, public interface, contractors and seasonal changes before updating policy arrangements.Risk profile and policy review notes. HSE separating pedestrians and vehicles
2AnalysingCompare incidents, customer complaints, audits and worker feedback to identify where responsibilities are unclear.Trend review and responsibility gap analysis. HSE separating pedestrians and vehicles
3ImplementingBrief managers and supervisors on policy responsibilities and link arrangements to pool safety, food hygiene, fire and safeguarding procedures.Briefing records and controlled procedures. HSE separating pedestrians and vehicles
4CheckingAudit whether teams know their responsibilities and whether arrangements are being used in live centres.Audit reports and field observations. HSE separating pedestrians and vehicles
5LearningUse drill learning, slips, hygiene findings and contractor issues to update policy arrangements.Learning log and policy change record. HSE separating pedestrians and vehicles
6ImprovingSet measurable objectives such as action closure, fire drill improvement, water safety checks and contractor audit completion.SMART objectives and management review. HSE separating pedestrians and vehicles
Sector Transfer

Table ID: health-and-safety-policy-sector-transfer

Source: https://www.sharehub.ltd/knowledge-hub/health-and-safety-policy.html Scope: Illustrative decision; competent task and jurisdiction review remains necessary.

Row 1

Column 1

Construction

Column 2

Concrete chasing exposes workers and other trades to respirable silica.

Column 3

Policy names the project owner, no-chase preference, extraction arrangement and failed-capture stop point. HSE concrete chasing and mortar raking

Row 2

Column 1

Fuel logistics

Column 2

Tank overfill can release fuel and form an ignitable vapour cloud.

Column 3

Policy names technical control ownership, transfer-release authority and bypass escalation. HSE Buncefield learning

Row 3

Column 1

Leisure

Column 2

Reversing delivery vehicle crosses a public entrance.

Column 3

Policy names the facilities owner, separated route arrangement and delivery hold authority. HSE separating pedestrians and vehicles

Read the complete comparison table
Sector Transfer
RowColumn 1Column 2Column 3
1ConstructionConcrete chasing exposes workers and other trades to respirable silica.Policy names the project owner, no-chase preference, extraction arrangement and failed-capture stop point. HSE concrete chasing and mortar raking
2Fuel logisticsTank overfill can release fuel and form an ignitable vapour cloud.Policy names technical control ownership, transfer-release authority and bypass escalation. HSE Buncefield learning
3LeisureReversing delivery vehicle crosses a public entrance.Policy names the facilities owner, separated route arrangement and delivery hold authority. HSE separating pedestrians and vehicles
Competence Matrix

Table ID: health-and-safety-policy-competence-matrix

Source: https://www.sharehub.ltd/knowledge-hub/health-and-safety-policy.html Scope: Illustrative decision; competent task and jurisdiction review remains necessary.

Row 1

Column 1

Worker or visitor-facing colleague

Column 2

Know who owns the route and how to hold unsafe delivery.

Column 3

Supervisor observes report and response.

Column 4

Route or supplier change. HSE separating pedestrians and vehicles

Row 2

Column 1

Supervisor

Column 2

Apply policy arrangement to live pedestrian conflict.

Column 3

Manager checks a held/released delivery.

Column 4

Occupied route or failed barrier. HSE separating pedestrians and vehicles

Row 3

Column 1

Facilities or logistics manager

Column 2

Design separation and update practical arrangements.

Column 3

Director signs route evidence and field check.

Column 4

New vehicle or entrance layout. HSE separating pedestrians and vehicles

Row 4

Column 1

Policy owner or adviser

Column 2

Translate duties into named responsibilities and consultation.

Column 3

Competent peer checks document and worker feedback.

Column 4

Change, incident or legal update. HSE prepare a health and safety policy

Row 5

Column 1

Senior leader

Column 2

Sign policy, resource route fix and test effectiveness.

Column 3

Board records decision and field challenge.

Column 4

Repeat conflict or review trigger. HSENI health and safety policy

Read the complete comparison table
Competence Matrix
RowColumn 1Column 2Column 3Column 4
1Worker or visitor-facing colleagueKnow who owns the route and how to hold unsafe delivery.Supervisor observes report and response.Route or supplier change. HSE separating pedestrians and vehicles
2SupervisorApply policy arrangement to live pedestrian conflict.Manager checks a held/released delivery.Occupied route or failed barrier. HSE separating pedestrians and vehicles
3Facilities or logistics managerDesign separation and update practical arrangements.Director signs route evidence and field check.New vehicle or entrance layout. HSE separating pedestrians and vehicles
4Policy owner or adviserTranslate duties into named responsibilities and consultation.Competent peer checks document and worker feedback.Change, incident or legal update. HSE prepare a health and safety policy
5Senior leaderSign policy, resource route fix and test effectiveness.Board records decision and field challenge.Repeat conflict or review trigger. HSENI health and safety policy
Source tables and records 4
Policy warning signs

Table ID: health-and-safety-policy-policy-warning-signs

Source: https://www.sharehub.ltd/knowledge-hub/health-and-safety-policy.html Scope: Official source supports the management principle; example requires local verification.

Row 1

Warning sign

Policy is generic

How harm can develop

Controls do not match actual risk.

Action

Tailor arrangements to business activities. HSE prepare a health and safety policy

Row 2

Warning sign

People cannot describe responsibilities

How harm can develop

Gaps appear during incidents or audits.

Action

Brief and assess role understanding. HSE prepare a health and safety policy

Row 3

Warning sign

Objectives are vague

How harm can develop

Improvement cannot be measured.

Action

Create SMART risk-based objectives. HSE prepare a health and safety policy

Row 4

Warning sign

Policy not reviewed after change

How harm can develop

Arrangements fall behind reality.

Action

Use change and incident triggers. HSE prepare a health and safety policy

Row 5

Warning sign

No worker feedback

How harm can develop

Controls may be impractical.

Action

Consult and close feedback loop. HSE prepare a health and safety policy

Row 6

Warning sign

Arrangements absent

How harm can develop

Intent never reaches the work.

Action

Link policy to procedures, registers and checks. HSE prepare a health and safety policy

Read the complete comparison table
Policy warning signs
RowWarning signHow harm can developAction
1Policy is genericControls do not match actual risk.Tailor arrangements to business activities. HSE prepare a health and safety policy
2People cannot describe responsibilitiesGaps appear during incidents or audits.Brief and assess role understanding. HSE prepare a health and safety policy
3Objectives are vagueImprovement cannot be measured.Create SMART risk-based objectives. HSE prepare a health and safety policy
4Policy not reviewed after changeArrangements fall behind reality.Use change and incident triggers. HSE prepare a health and safety policy
5No worker feedbackControls may be impractical.Consult and close feedback loop. HSE prepare a health and safety policy
6Arrangements absentIntent never reaches the work.Link policy to procedures, registers and checks. HSE prepare a health and safety policy
Related SHARE pages

Table ID: health-and-safety-policy-related-share-pages

Source: https://www.sharehub.ltd/knowledge-hub/health-and-safety-policy.html Scope: Official source supports the management principle; example requires local verification.

Row 1

Related page

Health and Safety Management Systems

Why it helps

Explains the wider system that gives policy effect.

Row 2

Related page

Health and Safety Leadership and Influence

Why it helps

Explains leadership commitment and resources.

Row 3

Related page

Consultation, Participation and Workforce Engagement

Why it helps

Explains worker involvement.

Row 4

Related page

Health and Safety Auditing

Why it helps

Explains how policy arrangements can be audited.

Row 5

Related page

Health and Safety Regulations in the UK

Why it helps

Explains the legal framework behind policy duties.

Read the complete comparison table
Related SHARE pages
RowRelated pageWhy it helps
1Health and Safety Management SystemsExplains the wider system that gives policy effect.
2Health and Safety Leadership and InfluenceExplains leadership commitment and resources.
3Consultation, Participation and Workforce EngagementExplains worker involvement.
4Health and Safety AuditingExplains how policy arrangements can be audited.
5Health and Safety Regulations in the UKExplains the legal framework behind policy duties.
Acronyms and meanings

Table ID: health-and-safety-policy-acronyms-and-meanings

Source: https://www.sharehub.ltd/knowledge-hub/health-and-safety-policy.html Scope: Official source supports the management principle; example requires local verification.

Row 1

Acronym

GNC

Meaning

IOSH National General Certificate

Plain english use

SHARE study route for policy structure and practical application.

Row 2

Acronym

SMART

Meaning

Specific, Measurable, Achievable, Relevant and Time-bound

Plain english use

A way of setting useful objectives.

Row 3

Acronym

PDCA

Meaning

Plan, Do, Check, Act

Plain english use

Continuous management cycle.

Row 4

Acronym

HSE

Meaning

Health and Safety Executive

Plain english use

Great Britain's health and safety regulator.

Row 5

Acronym

RAMS

Meaning

Risk Assessment and Method Statement

Plain english use

Common workplace document connecting arrangements to task control.

Read the complete comparison table
Acronyms and meanings
RowAcronymMeaningPlain english use
1GNCIOSH National General CertificateSHARE study route for policy structure and practical application.
2SMARTSpecific, Measurable, Achievable, Relevant and Time-boundA way of setting useful objectives.
3PDCAPlan, Do, Check, ActContinuous management cycle.
4HSEHealth and Safety ExecutiveGreat Britain's health and safety regulator.
5RAMSRisk Assessment and Method StatementCommon workplace document connecting arrangements to task control.
Potential SHARE downloads to add later

Table ID: health-and-safety-policy-potential-share-downloads-to-add-later

Source: https://www.sharehub.ltd/knowledge-hub/health-and-safety-policy.html Scope: Official source supports the management principle; example requires local verification.

Row 1

Document

Health and safety policy template

Purpose

Build statement, responsibilities and arrangements.

Typical owner

Business owner

Row 2

Document

Policy review checklist

Purpose

Check whether policy remains current and useful.

Typical owner

HSE adviser

Row 3

Document

Responsibility matrix

Purpose

Define who does what, when and how.

Typical owner

Manager

Row 4

Document

SMART objective tracker

Purpose

Turn policy aims into measurable actions.

Typical owner

Senior manager

Row 5

Document

Policy communication plan

Purpose

Brief employees and record feedback.

Typical owner

Supervisor

Read the complete comparison table
Potential SHARE downloads to add later
RowDocumentPurposeTypical owner
1Health and safety policy templateBuild statement, responsibilities and arrangements.Business owner
2Policy review checklistCheck whether policy remains current and useful.HSE adviser
3Responsibility matrixDefine who does what, when and how.Manager
4SMART objective trackerTurn policy aims into measurable actions.Senior manager
5Policy communication planBrief employees and record feedback.Supervisor