Maintenance and safe return to service · detailed source study

Optional reference study from the SHAREhub topic pages and selected source records used for this course. The core learning-time estimate excludes this extended reference.

Distinguish the check from the assurance it provides
Distinguish the check from the assurance it provides

Source: maintenance-inspection-and-testing-of-work-equipment-and-machinery--practical-maintenance-inspection-and-testing-of-work-equipment-and-machinery

On a lift truck, a user check, maintenance, a functional test and a required thorough examination have different purposes. A service sticker cannot stand for all of them. Match the equipment identity and actual parts/functions to the relevant user checks and planned inspection. Give defects an appropriate restriction, competent correction and evidence of restored function. Check applicable inspection/testing and statutory examination requirements separately, including their scope and limitations. Do not infer a universal interval or examination requirement from the illustrated truck alone. Further guidance: HSE: managing health and safety.

How do maintenance, inspection and testing differ?

Source: maintenance-inspection-and-testing-of-work-equipment-and-machinery--scope

Maintenance keeps equipment in safe condition; inspection finds dangerous condition or deterioration; testing challenges a specified function. Statutory thorough examination or written-scheme examination applies only to equipment within the relevant specialist regime. Source basis: HSE inspection of work equipment · HSE maintenance of work equipment · HSE LOLER overview · HSE pressure systems regulations overview · HSE thorough examination of lifting equipment · HSE managing risk using PPE · HSENI PUWER 1999 · IOSH hierarchy of control guidance. 2 linked parts. Follow the question numbers and complete the applicable route.

Part 1 of 2 · Questions 1–3 Source basis: HSE maintenance of work equipment · HSE thorough examination of lifting equipment · HSE pressure systems regulations overview · HSE inspection of work equipment · HSE L22 Safe use of work equipment · HSE LOLER overview · HSENI PUWER 1999 · GB PUWER 1998 legislation · NI PUWER 1999 legislation. Maintenance keeps equipment in safe condition; inspection finds dangerous condition or deterioration; testing challenges a specified function. Statutory thorough examination or written-scheme examination applies only to equipment within the relevant specialist regime. Maintenance keeps equipment in safe condition, inspection finds defects or deterioration, and testing checks a specified function. Apply it: Which part of this plan would you check at the workface before authorising the task?

Maintenance keeps equipment in safe condition, inspection finds defects or deterioration, and testing checks a specified function. Choose each check for the actual equipment and hazard; statutory examination is a separate requirement only where the relevant law applies. Keep defect and hold record, isolation method, repair, functional test, affected inspection decision, contractor handback and recurring-failure review. Apply it: What evidence would show that the change improves this task, rather than only completing a record? Competent repair investigates the interlock and service change. No production running or improvised powered test occurs while a person is exposed. Restore guards, clear tools and people, perform the specified protected stop/restart test, record the result and obtain named release.

Apply it: At which point would you hold this example, and what evidence would allow it to proceed? If the wrong check is chosen, a defect can remain hidden until a person meets moving machinery, a load falls or stored pressure is released. Apply it: Who could be exposed, including other trades, cleaners, maintainers and people nearby? Eliminate: At purchase or modification, the engineer moves lubrication, adjustment or condition-monitoring points outside the danger zone where practicable, so routine checks do not require guard removal or access beside moving parts. Reduce: The engineer evaluates an alternative bearing or maintainable assembly that reduces intervention frequency or permits servicing from a protected location, subject to the machine specification and change assessment.

Isolate: For the repair, authorised staff identify and isolate the conveyor and connected feeds, prevent reconnection, control stored energy and support parts that could move or fall using the machine-specific method. Control: The engineer defines a protected functional test with the required response and acceptance criteria, and the supervisor keeps everyone out of the danger zone. PPE: Select eye protection for particles and other task-specific protection where residual exposure remains. Read the full control table for qualifications, ownership and verification. Use the actual task and applicable jurisdiction; existing technical approval remains unchanged. Apply it: Which stronger option can be used here, and who will verify it before accepting the remaining risk?

Use the full topic for the decision points, practical examples, detailed control tables and source scope. HSE guidance applies to Great Britain; use HSENI for the Northern Ireland route and the source’s stated jurisdiction. A simplified guide does not change the page’s technical-review or approval status. Apply it: Which official source and full-topic section will you use to resolve the next decision? Keep one card or the full set for social sharing, team briefings and learning. Each PDF contains one card per page. Read the full topic for explanations, questions and source links. Maintenance keeps equipment in safe condition; inspection finds dangerous condition or deterioration; testing challenges a specified function.

Maintenance keeps equipment in safe condition; inspection finds dangerous condition or deterioration; testing challenges a specified function. Statutory thorough examination or written-scheme examination applies only to equipment within the relevant specialist regime. Maintenance keeps equipment in safe condition, inspection finds defects or deterioration, and testing checks a specified function. Apply it: Which part of this plan would you check at the workface before authorising the task? Use the evidence to improve the actual work arrangement. Maintenance keeps equipment in safe condition, inspection finds defects or deterioration, and testing checks a specified function. Choose each check for the actual equipment and hazard; statutory examination is a separate requirement only where the relevant law applies.

Keep defect and hold record, isolation method, repair, functional test, affected inspection decision, contractor handback and recurring-failure review. Apply it: What evidence would show that the change improves this task, rather than only completing a record? Fictional example: a practical application of the existing topic lesson. Competent repair investigates the interlock and service change. No production running or improvised powered test occurs while a person is exposed. Restore guards, clear tools and people, perform the specified protected stop/restart test, record the result and obtain named release. Apply it: At which point would you hold this example, and what evidence would allow it to proceed? Connect the task, the route to the person and the control that can fail.

If the wrong check is chosen, a defect can remain hidden until a person meets moving machinery, a load falls or stored pressure is released. Apply it: Who could be exposed, including other trades, cleaners, maintainers and people nearby? Start with the stronger practicable options and verify their effect. Eliminate: At purchase or modification, the engineer moves lubrication, adjustment or condition-monitoring points outside the danger zone where practicable, so routine checks do not require guard removal or access beside moving parts. Reduce: The engineer evaluates an alternative bearing or maintainable assembly that reduces intervention frequency or permits servicing from a protected location, subject to the machine specification and change assessment.

Isolate: For the repair, authorised staff identify and isolate the conveyor and connected feeds, prevent reconnection, control stored energy and support parts that could move or fall using the machine-specific method. Control: The engineer defines a protected functional test with the required response and acceptance criteria, and the supervisor keeps everyone out of the danger zone. PPE: Select eye protection for particles and other task-specific protection where residual exposure remains. Read the full control table for qualifications, ownership and verification. Use the actual task and applicable jurisdiction; existing technical approval remains unchanged. Apply it: Which stronger option can be used here, and who will verify it before accepting the remaining risk? Follow the official sources below and retain the task-specific evidence.

Use the full topic for the decision points, practical examples, detailed control tables and source scope. HSE guidance applies to Great Britain; use HSENI for the Northern Ireland route and the source’s stated jurisdiction. A simplified guide does not change the page’s technical-review or approval status. Apply it: Which official source and full-topic section will you use to resolve the next decision? Simplified learning guide. Use the full topic and the actual work arrangements; existing technical-review and approval statuses still apply. Workplace scenarios labelled fictional are illustrative examples. The Provision and Use of Work Equipment Regulations (PUWER), Lifting Operations and Lifting Equipment Regulations (LOLER) and Pressure Systems Safety Regulations (PSSR) each have distinct scope in GB and NI.

A service sheet can show lubrication but not that an interlock stops a conveyor. A pre-use check can reveal an obvious damaged guard but does not replace a competent inspection where deterioration or installation creates significant risk. Lifting-equipment thorough examination and pressure-system written-scheme examination have different legal purposes and qualified examiners. HSE maintenance of work equipment, HSE inspection of work equipment, HSE LOLER overview and HSE pressure systems regulations overview.

Why does the distinction matter?
Why does the distinction matter?

Source: maintenance-inspection-and-testing-of-work-equipment-and-machinery--harm-chain

If the wrong check is chosen, a defect can remain hidden until a person meets moving machinery, a load falls or stored pressure is released. A quarterly conveyor service might change a bearing but leave an interlock disconnected. A forklift service might overlook a lifting-chain defect requiring competent examination. A compressor may look tidy while its pressure safety device is unexamined under a written scheme. Work planning must trace each credible failure to the check that can detect it in time. HSE inspection of work equipment, HSE thorough examination of lifting equipment and HSE pressure systems regulations overview.

Which assets and functions need a plan?

Source: maintenance-inspection-and-testing-of-work-equipment-and-machinery--planning

List work equipment, its tasks, safety-critical parts, degradation mechanisms and required checks. Assign an owner for each inspection, maintenance task, test and defect. For a conveyor, include guards, interlocks, emergency stops, drives, nip points and stored energy. For mobile plant, include brakes, tyres, steering, lift functions and attachments. For a pressure system, identify whether the system qualifies for a written scheme and its protected parts. Use the manufacturer’s information and the risk assessment to define what can deteriorate and who is competent to inspect it. HSE PUWER overview and HSE inspection of work equipment.

When is a PUWER inspection needed?

Source: maintenance-inspection-and-testing-of-work-equipment-and-machinery--inspection-triggers

In Great Britain, inspection is required where safety depends on installation, where deterioration could cause danger, or after exceptional circumstances liable to jeopardise safety. The NI instrument is separate and must be checked for the NI workplace. Source basis: HSE inspection of work equipment · HSENI PUWER 1999 · GB PUWER 1998 legislation · NI PUWER 1999 legislation · HSE L22 Safe use of work equipment · HSE maintenance of work equipment · HSE thorough examination of lifting equipment · HSE PUWER overview · HSE LOLER overview · HSE pressure systems regulations overview.

Source basis: HSE PUWER overview · HSE inspection of work equipment · HSE maintenance of work equipment · HSE LOLER overview · HSE pressure systems regulations overview · HSE L22 Safe use of work equipment · HSE thorough examination of lifting equipment · HSE managing risk using PPE · HSENI PUWER 1999 · GB PUWER 1998 legislation · NI PUWER 1999 legislation · GB LOLER 1998 legislation · NI LOLER 1999 legislation · GB Pressure Systems Safety Regulations 2000 · NI Pressure Systems Safety Regulations 2004 · HSENI work equipment and machinery guidance. A reinstalled machine may need inspection before first use at the new location. Deteriorating equipment needs suitable intervals set by risk.

Major modification, suspected serious damage or a substantial change of use can trigger an additional inspection. Not every item needs a formal inspection; a low-risk item may be adequately checked before use. Keep the inspection result and act on defects. HSE inspection of work equipment and HSENI PUWER 1999. For GB PUWER inspection, retain the result at least until the next inspection and ensure equipment moving between undertakings has physical evidence of the last required inspection. Check scope, result, restrictions and next trigger before use. This is separate from LOLER/PSSR examination-record retention. NI uses its own PUWER route. HSE: inspection of work equipment.

How should intervals be set?
How should intervals be set?

Source: maintenance-inspection-and-testing-of-work-equipment-and-machinery--intervals

Choose an interval from failure consequence, environment, use, deterioration, manufacturer information and defect history. Do not apply one period to all work equipment. A wet, abrasive or high-cycle setting can shorten the safe detection window. A safety function with hidden failure may need a protected functional test rather than a visual check. Adjust plans after repeat faults, near misses, modification or evidence that failures occur between checks. Specialist regimes may prescribe an examination scheme or interval for their scope; confirm the jurisdiction and equipment before quoting one. HSE inspection of work equipment and HSE thorough examination of lifting equipment.

How should a safety function be tested?

Source: maintenance-inspection-and-testing-of-work-equipment-and-machinery--functional-testing

Specify the function, safe test position, expected response, acceptance criteria and restoration before a competent person tests it. For an interlock, confirm the guard state, stopped or prevented motion, run-down and restart behaviour for the real access route. A green indicator alone is not proof. Test from a protected position and record failures; do not put a person in danger to demonstrate the function. After repair or modification, consider the whole linked system, not only the replaced component. HSE L22 Safe use of work equipment and HSE maintenance of work equipment.

How should defects be controlled?

Source: maintenance-inspection-and-testing-of-work-equipment-and-machinery--defects

Report and classify the defect, keep dangerous equipment out of use, repair competently and prove the affected function before release. A missing guard, failed brake, cracked lifting part or uncertain pressure protection needs a clear stop-use decision. Tagging helps communicate a hold but does not physically prevent reuse on its own; choose isolation or access control as needed. Record who may remove the hold and what evidence they require. Repeated defects call for cause investigation and a changed plan. HSE maintenance of work equipment and HSE thorough examination of lifting equipment. An ordinary service defect is recorded, quarantined and resolved through the equipment system. A statutory examiner’s finding follows its own report route as well as the work restriction.

For GB LOLER, the examiner immediately informs the dutyholder of dangerous defects; serious existing or potential dangerous defects require the prescribed written report and a copy to the enforcing authority as soon as practicable. Respect any specified remedy deadline and prohibition on continued use. HSE: lifting examinations and dangerous-defect reports. For GB PSSR, the competent person’s imminent-danger process includes immediate notification, a written report to the user/owner and a copy to the enforcing authority within 14 days; prevent operation until the required remedy is made. HSE: pressure systems. NI has separate LOLER/PSSR instruments and enforcing routes: apply the corresponding current provisions and competent advice. A manager cannot waive an examiner’s restriction; not every minor maintenance defect is externally reportable.

How can maintenance itself be made safe?
How can maintenance itself be made safe?

Source: maintenance-inspection-and-testing-of-work-equipment-and-machinery--safe-maintenance

Plan intervention hazards before removing guards or opening plant. Control energy, movement, height, substances, contractors and nearby operations for the whole job. Identify every energy source, bring equipment to the required state, securely isolate, prevent reconnection and release or restrain stored energy. A stop command or open guard is not secure isolation. Use planned exceptional powered fault-finding only with competent specialists and designed protection. Coordinate group work and shift changes. HSE maintenance of work equipment and HSE L22 Safe use of work equipment. At handback, account for people and tools, restore guards and devices, verify the affected functions and authorise a controlled restart. A permit is a coordination tool where the risk system requires it; it does not substitute for physical controls.

Contractors need equipment identity, instructions, hazard information and a defined interface.

How can the ISO 45001 hierarchy of controls reduce machinery risks during maintenance, inspection and testing?

Source: maintenance-inspection-and-testing-of-work-equipment-and-machinery--ericpd

Choose the safe intervention and test method before a maintainer approaches danger. Design out unnecessary access, use engineered separation and secure isolation for the planned work, then support those measures with competent instruction, controlled tests and residual PPE. Illustrative decision: BuildOut replaces a conveyor bearing and checks the protective interlock. Mechanical repair and demonstration of the safety function are separate tasks. The engineer specifies the isolation and the protected test; the supervisor coordinates operators, cleaners and linked equipment. ERICPD means Eliminate, Reduce (including substitution), Isolate, Control, PPE and Discipline. The five-level hierarchy groups measures as elimination, substitution, engineering controls, administrative controls and PPE. They overlap: isolation is usually an engineering measure; control can include engineered and administrative measures.

Discipline means maintaining and checking the controls, supervising the method and learning from defects, rather than blaming someone or accepting weaker protection. ERICPD is a planning crossmap. Its prompts do not add a sixth rung or rank Isolate above engineering. Discipline verifies and sustains every control level. The hierarchy of controls in ISO 45001:2018 comes under Clause 8.1.2 (Eliminating hazards and reducing OH&S risks), which is located within Clause 8 ("Operation"). ESEAP: Elimination, Substitution, Engineering controls, Administrative controls and PPE. Control order: HSE hierarchy of controls and IOSH hierarchy of control guidance. The comparison is an original illustrative application of the general HSE hierarchy, not a machine-specific method, permit or design approval. The employer must choose measures for the actual work and jurisdiction.

Apply the separate Northern Ireland legal route where relevant; the local assessment and competent technical decision govern release. Sources: HSE hierarchy of controls; HSE maintenance of work equipment; HSE inspection of work equipment; HSENI PUWER 1999.

How can a conveyor fail despite regular servicing?
How can a conveyor fail despite regular servicing?

Source: maintenance-inspection-and-testing-of-work-equipment-and-machinery--worked-example

BuildOut’s bearing service did not prove the interlock still worked. The supervisor must hold use until a competent repair and protected function test support named release. Source basis: HSE maintenance of work equipment · HSE L22 Safe use of work equipment · HSE managing risk using PPE · HSE inspection of work equipment · HSENI PUWER 1999. 2 linked parts. Follow the question numbers and complete the applicable route. Part 1 of 2 · Questions 1–3 Source basis: HSE maintenance of work equipment · HSE L22 Safe use of work equipment · HSE inspection of work equipment · HSE PUWER overview · HSE thorough examination of lifting equipment · HSE LOLER overview · HSE pressure systems regulations overview.

What changes across equipment and sectors?

Source: maintenance-inspection-and-testing-of-work-equipment-and-machinery--sector-transfer

The check must fit the failure route: moving machinery, mobile lifting and stored pressure need different competence and legal scope. Sources: HSE maintenance of work equipment; HSE inspection of work equipment; HSE LOLER overview; HSE pressure systems regulations overview.

Who owns each check and release?

Source: maintenance-inspection-and-testing-of-work-equipment-and-machinery--roles

Users perform defined pre-use checks; competent people inspect, maintain and test within scope; competent, sufficiently impartial people handle specialist statutory examinations; managers control defects and release. Source basis: HSE PUWER overview · HSE inspection of work equipment · HSE LOLER overview · HSE thorough examination of lifting equipment · GB PUWER 1998 legislation · NI PUWER 1999 legislation · GB LOLER 1998 legislation · NI LOLER 1999 legislation · GB Pressure Systems Safety Regulations 2000 · NI Pressure Systems Safety Regulations 2004 · HSE pressure systems regulations overview · HSENI work equipment and machinery guidance · HSE maintenance of work equipment. A supervisor should not sign a specialist examination they cannot judge.

A competent examiner may be in-house if sufficiently independent and impartial; the person who routinely maintains the equipment should not examine their own work. The examiner must identify dangerous defects and act without pressure from the maintenance team. A manager needs one asset record that connects tasks, findings, holds, tests, statutory reports and authorisation. HSE thorough examination of lifting equipment and HSE inspection of work equipment.

What competence does each role need?
What competence does each role need?

Source: maintenance-inspection-and-testing-of-work-equipment-and-machinery--competence

Teach and assess the task each person performs, define authority and reassess after equipment, method or performance changes. Sources: HSE maintenance of work equipment; HSE inspection of work equipment; HSE thorough examination of lifting equipment; HSE pressure systems regulations overview.

Which GB and NI legal routes apply?

Source: maintenance-inspection-and-testing-of-work-equipment-and-machinery--law

Great Britain uses PUWER 1998, LOLER 1998 and PSSR 2000 where each applies; Northern Ireland has separate 1999 PUWER and LOLER instruments and PSSR 2004. Source basis: HSE inspection of work equipment · HSE maintenance of work equipment · HSE LOLER overview · HSE pressure systems regulations overview · NI LOLER 1999 legislation · HSENI work equipment and machinery guidance · NI PUWER 1999 legislation · HSENI PUWER 1999 · GB PUWER 1998 legislation · GB LOLER 1998 legislation · GB Pressure Systems Safety Regulations 2000 · NI Pressure Systems Safety Regulations 2004 · HSE thorough examination of lifting equipment. Identify the workplace, equipment, intended function and whether lifting or a relevant pressure system is involved.

Do not apply an examination interval from one regime to every machine. PUWER inspection, LOLER thorough examination and PSSR written-scheme examination are different duties with different evidence. HSE inspection of work equipment, HSE thorough examination of lifting equipment, HSE pressure systems regulations overview and HSENI work equipment and machinery guidance.

How should managers assure equipment remains safe?

Source: maintenance-inspection-and-testing-of-work-equipment-and-machinery--assurance

Trace each important failure to the check that detects it, then sample the evidence and the actual plant condition. Review overdue checks by risk, failed functional tests, statutory reports, repeated defects, contractor quality and unauthorised returns. Walk the equipment with operators to find access and intervention realities. A dashboard showing 100% completed services is weak if it omits guards, emergency stops or pressure protection. HSE inspection of work equipment and HSE maintenance of work equipment. Illustrative asset record: conveyor interlock; protected functional check under the machine-specific plan; competent engineer; last result failed; equipment held; next trigger after repair; release requires specified passing results, guards restored and named handback. A service closure is not proof of a required inspection or examination.

When must equipment be held or an emergency start?

Source: maintenance-inspection-and-testing-of-work-equipment-and-machinery--warning

Hold use for a failed safeguard, dangerous defect, overdue required examination, uncertain pressure condition or unverified isolation. Protect people before investigating records. 2 linked parts. Follow the question numbers and complete the applicable route. Part 1 of 2 · Questions 1–3 Source basis: HSE maintenance of work equipment · HSE thorough examination of lifting equipment · HSE pressure systems regulations overview · HSE inspection of work equipment · HSE managing risk using PPE · HSENI PUWER 1999 · HSE L22 Safe use of work equipment · HSE LOLER overview. Stop from a safe place, prevent reuse, report and ask the competent owner for assessment. For injury, entrapment or release, raise the alarm and follow the site rescue or emergency plan; improvised movement can worsen harm.

Resume only after correction, required examination or test, restored protection and named handback. HSE maintenance of work equipment and HSE thorough examination of lifting equipment.

What should fuel-equipment inspection and testing evidence identify?
What should fuel-equipment inspection and testing evidence identify?

Source: maintenance-inspection-and-testing-of-work-equipment-and-machinery--crownway-atex-example

Use the component view to identify the actual equipment and intended protection function. The planned record link describes expected evidence, not a completed check. A hose, tank or protective device has a safety purpose which depends on its condition and supporting checks. Activity focus: Connect each identified defect to the responsible owner and appropriate operational decision. Contextual workplace scene. Use the task, control and evidence checks in this section; appearance alone does not establish safe conditions, individual health or approval. Compare the fixed dispenser island and cabinet with an inserted nozzle at the vehicle filler. The near and extended-hose positions show why the refuelling interface needs its own assessment location.

Activity focus: Use the cutaway for the dispenser internals, then follow the hose to the nozzle tip. Move the filler outward without stretching the hose and compare the stated Stage II recovery conditions. Contextual workplace scene. Use the task, control and evidence checks in this section; appearance alone does not establish safe conditions, individual health or approval. Educational illustration, not to scale. Coloured zones are teaching examples, not a site-specific hazardous-area classification. Basis and limits: Inspection / non-destructive testing · Electricity in potentially explosive atmospheres · ATEX equipment and explosive atmospheres · Petrol dispensing premises: DSEAR risk assessments, GN75 · Payment at the pump: hazardous areas and vehicle refuelling · Dispensing petrol as a fuel: physical hazards

BuildOut service and failed interlock

Source: maintenance-inspection-and-testing-of-work-equipment-and-machinery--example--maintenance-inspection-and-testing-of-work-equipment-and-machinery-buildout-conveyor-interlock

Task Material And Setting: BuildOut Ltd’s warehouse conveyor moves bagged building material. A contractor services bearings, then an operator reports that the interlocked access guard no longer stops the belt. People And Prerequisites: Operator, cleaner, contractor and supervisor may enter the zone. The machine identity, linked drives, pneumatic feed, instructions and previous test result are needed. Before: The operator stops and reports the failure; the supervisor holds the whole affected line. The maintainer identifies and verifies every energy boundary before opening the guard. During: Competent repair investigates the interlock and service change. No production running or improvised powered test occurs while a person is exposed. Hold Or Stop: Hold if guard function, isolation, run-down, linked restart or personnel accounting is uncertain.

The completed service sheet is not a release. Completion And Hand Back: Restore guards, clear tools and people, perform the specified protected stop/restart test, record the result and obtain named release. Evidence: Keep defect and hold record, isolation method, repair, functional test, affected inspection decision, contractor handback and recurring-failure review. Sources: HSE maintenance of work equipment; HSE inspection of work equipment; HSE L22 Safe use of work equipment.

Source tables and records 1
Different checks and what they prove

Table ID: maintenance-inspection-and-testing-of-work-equipment-and-machinery-check-types

Source: https://www.sharehub.ltd/knowledge-hub/maintenance-inspection-and-testing-of-work-equipment-and-machinery.html

Row 1

Activity

Pre-use check

Purpose

User notices obvious damage or unsafe condition before use.

Limit

A simple visual check does not prove hidden safety functions; an instructed pre-use routine may include safe protected functional checks within the user’s competence.

Row 2

Activity

Maintenance

Purpose

Keeps or restores equipment to specification.

Limit

A completed service alone is not an independent condition inspection.

Row 3

Activity

PUWER inspection

Purpose

Competent check for installation or deterioration risk when triggered.

Limit

Not an automatic statutory thorough examination of every machine.

Row 4

Activity

Functional test

Purpose

Demonstrates a named guard, stop, brake, alarm or trip response.

Limit

A partial test does not validate an entire system.

Row 5

Activity

LOLER thorough examination

Purpose

Competent systematic examination of lifting equipment where applicable.

Limit

Does not replace routine maintenance or all PUWER checks.

Row 6

Activity

PSSR written-scheme examination

Purpose

Competent examination under a scheme for qualifying pressure systems.

Limit

Not the same as a generic service or LOLER report.

Read the complete comparison table
Different checks and what they prove
RowActivityPurposeLimit
1Pre-use checkUser notices obvious damage or unsafe condition before use.A simple visual check does not prove hidden safety functions; an instructed pre-use routine may include safe protected functional checks within the user’s competence.
2MaintenanceKeeps or restores equipment to specification.A completed service alone is not an independent condition inspection.
3PUWER inspectionCompetent check for installation or deterioration risk when triggered.Not an automatic statutory thorough examination of every machine.
4Functional testDemonstrates a named guard, stop, brake, alarm or trip response.A partial test does not validate an entire system.
5LOLER thorough examinationCompetent systematic examination of lifting equipment where applicable.Does not replace routine maintenance or all PUWER checks.
6PSSR written-scheme examinationCompetent examination under a scheme for qualifying pressure systems.Not the same as a generic service or LOLER report.
Task-specific ERICPD and five-level control comparison

Table ID: maintenance-inspection-and-testing-of-work-equipment-and-machinery-control-crossmap

Source: https://www.sharehub.ltd/knowledge-hub/maintenance-inspection-and-testing-of-work-equipment-and-machinery.html Scope: Original illustrative application of the HSE hierarchy; not a task-specific method, permit or design approval. Local assessment, actual instructions, jurisdiction and competent verification govern use and release.

Row 1

Level

Eliminate / elimination

Intervention

At purchase or modification, the engineer moves lubrication, adjustment or condition-monitoring points outside the danger zone where practicable, so routine checks do not require guard removal or access beside moving parts.

Verification

Verify the revised arrangement against all use and maintenance tasks. An awkward new access route or exposed linked drive means the intended risk reduction has not been demonstrated.

Row 2

Level

Reduce / substitution when replacing a hazard; otherwise engineering or administrative risk reduction

Intervention

The engineer evaluates an alternative bearing or maintainable assembly that reduces intervention frequency or permits servicing from a protected location, subject to the machine specification and change assessment.

Verification

Confirm compatibility, load, speed and protective-function effects with suitable technical information. A component substitution must not be assumed equivalent because it fits.

Row 3

Level

Isolate / engineering

Intervention

For the repair, authorised staff identify and isolate the conveyor and connected feeds, prevent reconnection, control stored energy and support parts that could move or fall using the machine-specific method.

Verification

Verify the safe state before access. Unknown energy, a remaining live feed, pressure or an unstable part holds the repair; an emergency stop alone does not establish isolation.

Row 4

Level

Control / engineered and administrative measures

Intervention

The engineer defines a protected functional test with the required response and acceptance criteria, and the supervisor keeps everyone out of the danger zone. A necessary powered test uses a separately assessed specialist method.

Verification

Record results and restore the safeguards and authorised operating mode. Failed stopping or restart behaviour, an exposed person or an unplanned powered test prevents hand-back.

Row 5

Level

PPE / PPE

Intervention

Select eye protection for particles and other task-specific protection where residual exposure remains. Consider entanglement and compatibility before selecting gloves around rotation; the repair method must control contact with movement.

Verification

Inspect PPE and follow its maintenance and replacement arrangements. PPE cannot validate an interlock, hold a falling part or make an exposed conveyor safe.

Row 6

Level

Discipline / sustained engineering and administrative controls

Intervention

Managers resource the inspection plan; supervisors enforce defect quarantine and named release; competent staff review recurring failures and changes to intervals or methods.

Verification

Keep the defect, repair, protected test and hand-back evidence. A service receipt is not proof that each safety function works, and inspection intervals remain equipment- and risk-specific.

Read the complete comparison table
Task-specific ERICPD and five-level control comparison
RowLevelInterventionVerification
1Eliminate / eliminationAt purchase or modification, the engineer moves lubrication, adjustment or condition-monitoring points outside the danger zone where practicable, so routine checks do not require guard removal or access beside moving parts.Verify the revised arrangement against all use and maintenance tasks. An awkward new access route or exposed linked drive means the intended risk reduction has not been demonstrated.
2Reduce / substitution when replacing a hazard; otherwise engineering or administrative risk reductionThe engineer evaluates an alternative bearing or maintainable assembly that reduces intervention frequency or permits servicing from a protected location, subject to the machine specification and change assessment.Confirm compatibility, load, speed and protective-function effects with suitable technical information. A component substitution must not be assumed equivalent because it fits.
3Isolate / engineeringFor the repair, authorised staff identify and isolate the conveyor and connected feeds, prevent reconnection, control stored energy and support parts that could move or fall using the machine-specific method.Verify the safe state before access. Unknown energy, a remaining live feed, pressure or an unstable part holds the repair; an emergency stop alone does not establish isolation.
4Control / engineered and administrative measuresThe engineer defines a protected functional test with the required response and acceptance criteria, and the supervisor keeps everyone out of the danger zone. A necessary powered test uses a separately assessed specialist method.Record results and restore the safeguards and authorised operating mode. Failed stopping or restart behaviour, an exposed person or an unplanned powered test prevents hand-back.
5PPE / PPESelect eye protection for particles and other task-specific protection where residual exposure remains. Consider entanglement and compatibility before selecting gloves around rotation; the repair method must control contact with movement.Inspect PPE and follow its maintenance and replacement arrangements. PPE cannot validate an interlock, hold a falling part or make an exposed conveyor safe.
6Discipline / sustained engineering and administrative controlsManagers resource the inspection plan; supervisors enforce defect quarantine and named release; competent staff review recurring failures and changes to intervals or methods.Keep the defect, repair, protected test and hand-back evidence. A service receipt is not proof that each safety function works, and inspection intervals remain equipment- and risk-specific.
Equipment-specific inspection and maintenance decisions

Table ID: maintenance-inspection-and-testing-of-work-equipment-and-machinery-sector-transfer

Source: https://www.sharehub.ltd/knowledge-hub/maintenance-inspection-and-testing-of-work-equipment-and-machinery.html

Row 1

Setting

Manufacturing conveyor

Risk

Guard or interlock fails; person reaches moving nip.

Decision

Protected functional test and repair; hold on failed stop. Sources: HSE maintenance of work equipment; HSE inspection of work equipment; HSE L22 Safe use of work equipment.

Row 2

Setting

Warehouse lift truck

Risk

Brakes or steering fail; lifting chain or attachment deteriorates.

Decision

PUWER vehicle checks plus applicable LOLER thorough examination; hold dangerous defects. Sources: HSE inspection of work equipment; HSE LOLER overview; HSE thorough examination of lifting equipment.

Row 3

Setting

Construction mobile elevating platform

Risk

Stability or lifting part deteriorates; person falls.

Decision

Machine-specific maintenance, pre-use checks and lifting examination where applicable. Sources: HSE LOLER overview; HSE thorough examination of lifting equipment; HSE maintenance of work equipment.

Row 4

Setting

Process compressor

Risk

Pressure boundary or protective device fails.

Decision

Determine PSSR scope, written scheme and competent examination; no use outside safe limits. Sources: HSE pressure systems regulations overview; HSE maintenance of work equipment.

Read the complete comparison table
Equipment-specific inspection and maintenance decisions
RowSettingRiskDecision
1Manufacturing conveyorGuard or interlock fails; person reaches moving nip.Protected functional test and repair; hold on failed stop. Sources: HSE maintenance of work equipment; HSE inspection of work equipment; HSE L22 Safe use of work equipment.
2Warehouse lift truckBrakes or steering fail; lifting chain or attachment deteriorates.PUWER vehicle checks plus applicable LOLER thorough examination; hold dangerous defects. Sources: HSE inspection of work equipment; HSE LOLER overview; HSE thorough examination of lifting equipment.
3Construction mobile elevating platformStability or lifting part deteriorates; person falls.Machine-specific maintenance, pre-use checks and lifting examination where applicable. Sources: HSE LOLER overview; HSE thorough examination of lifting equipment; HSE maintenance of work equipment.
4Process compressorPressure boundary or protective device fails.Determine PSSR scope, written scheme and competent examination; no use outside safe limits. Sources: HSE pressure systems regulations overview; HSE maintenance of work equipment.
Role learning demonstration assessment and reassessment

Table ID: maintenance-inspection-and-testing-of-work-equipment-and-machinery-competence

Source: https://www.sharehub.ltd/knowledge-hub/maintenance-inspection-and-testing-of-work-equipment-and-machinery.html

Row 1

Role

New worker

Learning

Recognise damaged guards, failed stop, tags and reporting.

Proof

Demonstrates a safe stop and defect report.

Assessor

Supervisor records awareness.

Trigger

New machine or incident.

Row 2

Role

Operator

Learning

Know pre-use check, normal limits and hold conditions.

Proof

Shows the actual check and refuses unsafe use.

Assessor

Supervisor signs machine/task scope.

Trigger

New mode, defect trend or changed task.

Row 3

Role

Maintainer

Learning

Know instructions, isolation, repair, protected test and handback.

Proof

Practical task and verified energy boundary.

Assessor

Engineering lead records authorisation.

Trigger

New energy, component or method.

Row 4

Role

Inspector or examiner

Learning

Know relevant damage modes and legal/scheme scope.

Proof

Examines representative defects and writes a usable report.

Assessor

Competent technical lead and, where needed, impartiality review.

Trigger

Equipment or regime change.

Row 5

Role

Supervisor or manager

Learning

Plan intervals, hold defects, coordinate contractors and release.

Proof

Runs failed-interlock scenario with written hold and evidence.

Assessor

Responsible manager samples decisions.

Trigger

Repeated defect or near miss.

Row 6

Role

Safety adviser or auditor

Learning

Trace GB/NI law and source to field evidence.

Proof

Samples check, repair, test and statutory report distinction.

Assessor

Independent competent review.

Trigger

Law or assurance finding.

Read the complete comparison table
Role learning demonstration assessment and reassessment
RowRoleLearningProofAssessorTrigger
1New workerRecognise damaged guards, failed stop, tags and reporting.Demonstrates a safe stop and defect report.Supervisor records awareness.New machine or incident.
2OperatorKnow pre-use check, normal limits and hold conditions.Shows the actual check and refuses unsafe use.Supervisor signs machine/task scope.New mode, defect trend or changed task.
3MaintainerKnow instructions, isolation, repair, protected test and handback.Practical task and verified energy boundary.Engineering lead records authorisation.New energy, component or method.
4Inspector or examinerKnow relevant damage modes and legal/scheme scope.Examines representative defects and writes a usable report.Competent technical lead and, where needed, impartiality review.Equipment or regime change.
5Supervisor or managerPlan intervals, hold defects, coordinate contractors and release.Runs failed-interlock scenario with written hold and evidence.Responsible manager samples decisions.Repeated defect or near miss.
6Safety adviser or auditorTrace GB/NI law and source to field evidence.Samples check, repair, test and statutory report distinction.Independent competent review.Law or assurance finding.
GB and NI work-equipment and specialist legal routes

Table ID: maintenance-inspection-and-testing-of-work-equipment-and-machinery-legal-routes

Source: https://www.sharehub.ltd/knowledge-hub/maintenance-inspection-and-testing-of-work-equipment-and-machinery.html

Row 1

Route

GB PUWER 1998

Duty

Maintenance and triggered work-equipment inspection.

Decision

Use HSE and current GB instrument for the asset.

Row 2

Route

NI PUWER 1999

Duty

Separate NI work-equipment route.

Decision

Use HSENI and current NI instrument; do not cite GB regulation as NI law.

Row 3

Route

GB LOLER 1998

Duty

Additional lifting-equipment duties and thorough examination where applicable.

Decision

A service is not a LOLER examination.

Row 4

Route

NI LOLER 1999

Duty

Separate NI lifting-equipment route.

Decision

Confirm NI examination scope and competent person.

Row 5

Route

GB PSSR 2000

Duty

Qualifying pressure systems need a written scheme and examination under it.

Decision

Confirm system scope and scheme before use.

Row 6

Route

NI PSSR 2004

Duty

Separate NI pressure-system written-scheme and examination route.

Decision

Confirm current NI instrument and scheme for the system.

Read the complete comparison table
GB and NI work-equipment and specialist legal routes
RowRouteDutyDecision
1GB PUWER 1998Maintenance and triggered work-equipment inspection.Use HSE and current GB instrument for the asset.
2NI PUWER 1999Separate NI work-equipment route.Use HSENI and current NI instrument; do not cite GB regulation as NI law.
3GB LOLER 1998Additional lifting-equipment duties and thorough examination where applicable.A service is not a LOLER examination.
4NI LOLER 1999Separate NI lifting-equipment route.Confirm NI examination scope and competent person.
5GB PSSR 2000Qualifying pressure systems need a written scheme and examination under it.Confirm system scope and scheme before use.
6NI PSSR 2004Separate NI pressure-system written-scheme and examination route.Confirm current NI instrument and scheme for the system.
Official source purpose jurisdiction and publication

Table ID: maintenance-inspection-and-testing-of-work-equipment-and-machinery-official-sources

Source: https://www.sharehub.ltd/knowledge-hub/maintenance-inspection-and-testing-of-work-equipment-and-machinery.html

Row 1

Authority

HSE

Publication

HSE maintenance of work equipment; Updated 2024-11-19

Jurisdiction

Great Britain

Decision

GB maintenance duty, safe intervention, competence and handback.

Row 2

Authority

HSE

Publication

HSE inspection of work equipment; Updated 2024-10-29

Jurisdiction

Great Britain

Decision

GB PUWER inspection triggers, risk-based intervals and records.

Row 3

Authority

HSE

Publication

HSE PUWER overview

Jurisdiction

Great Britain

Decision

GB suitability, maintenance, inspection, safeguarding and training.

Row 4

Authority

HSE

Publication

HSE L22 Safe use of work equipment; 2014; amended 2018

Jurisdiction

Great Britain; approved for use in NI via HSENI

Decision

GB PUWER detail and practical work-equipment conditions.

Row 5

Authority

HSENI

Publication

HSENI PUWER 1999

Jurisdiction

Northern Ireland

Decision

Distinct NI workplace work-equipment route.

Row 6

Authority

HSENI

Publication

HSENI work equipment and machinery guidance

Jurisdiction

Northern Ireland

Decision

NI PUWER and LOLER routes, HSE technical guidance context.

Row 7

Authority

Legislation.gov.uk

Publication

GB PUWER 1998 legislation; 1998 as amended

Jurisdiction

Great Britain

Decision

GB work-equipment maintenance and inspection instrument.

Row 8

Authority

Legislation.gov.uk

Publication

NI PUWER 1999 legislation; 1999 as amended

Jurisdiction

Northern Ireland

Decision

Distinct NI work-equipment instrument.

Row 9

Authority

HSE

Publication

HSE LOLER overview

Jurisdiction

Great Britain

Decision

GB lifting-equipment operation and thorough examination.

Row 10

Authority

HSE

Publication

HSE thorough examination of lifting equipment

Jurisdiction

Great Britain

Decision

GB LOLER competent, impartial examination and defect action.

Row 11

Authority

Legislation.gov.uk

Publication

GB LOLER 1998 legislation; 1998 as amended

Jurisdiction

Great Britain

Decision

GB lifting-equipment thorough examination route.

Row 12

Authority

Legislation.gov.uk

Publication

NI LOLER 1999 legislation; 1999 as amended

Jurisdiction

Northern Ireland

Decision

Distinct NI lifting-equipment route.

Row 13

Authority

HSE

Publication

HSE pressure systems regulations overview

Jurisdiction

Great Britain

Decision

GB written scheme of examination, competent person and stored energy.

Row 14

Authority

Legislation.gov.uk

Publication

GB Pressure Systems Safety Regulations 2000; 2000 as amended

Jurisdiction

Great Britain

Decision

GB relevant pressure-system instrument.

Row 15

Authority

Legislation.gov.uk

Publication

NI Pressure Systems Safety Regulations 2004; 2004 as amended

Jurisdiction

Northern Ireland

Decision

Distinct NI pressure-system written-scheme instrument.

Row 16

Authority

HSE

Publication

HSE managing risk using PPE

Jurisdiction

Great Britain

Decision

Residual PPE after higher-order controls.

Row 17

Column 1

Official source

Column 2

HSE: pressure systems

Column 3

Great Britain

Column 4

Separate written-scheme examination, imminent-danger and competent-person process

Read the complete comparison table
Official source purpose jurisdiction and publication
RowAuthorityPublicationJurisdictionDecisionColumn 1Column 2Column 3Column 4
1HSEHSE maintenance of work equipment; Updated 2024-11-19Great BritainGB maintenance duty, safe intervention, competence and handback.
2HSEHSE inspection of work equipment; Updated 2024-10-29Great BritainGB PUWER inspection triggers, risk-based intervals and records.
3HSEHSE PUWER overviewGreat BritainGB suitability, maintenance, inspection, safeguarding and training.
4HSEHSE L22 Safe use of work equipment; 2014; amended 2018Great Britain; approved for use in NI via HSENIGB PUWER detail and practical work-equipment conditions.
5HSENIHSENI PUWER 1999Northern IrelandDistinct NI workplace work-equipment route.
6HSENIHSENI work equipment and machinery guidanceNorthern IrelandNI PUWER and LOLER routes, HSE technical guidance context.
7Legislation.gov.ukGB PUWER 1998 legislation; 1998 as amendedGreat BritainGB work-equipment maintenance and inspection instrument.
8Legislation.gov.ukNI PUWER 1999 legislation; 1999 as amendedNorthern IrelandDistinct NI work-equipment instrument.
9HSEHSE LOLER overviewGreat BritainGB lifting-equipment operation and thorough examination.
10HSEHSE thorough examination of lifting equipmentGreat BritainGB LOLER competent, impartial examination and defect action.
11Legislation.gov.ukGB LOLER 1998 legislation; 1998 as amendedGreat BritainGB lifting-equipment thorough examination route.
12Legislation.gov.ukNI LOLER 1999 legislation; 1999 as amendedNorthern IrelandDistinct NI lifting-equipment route.
13HSEHSE pressure systems regulations overviewGreat BritainGB written scheme of examination, competent person and stored energy.
14Legislation.gov.ukGB Pressure Systems Safety Regulations 2000; 2000 as amendedGreat BritainGB relevant pressure-system instrument.
15Legislation.gov.ukNI Pressure Systems Safety Regulations 2004; 2004 as amendedNorthern IrelandDistinct NI pressure-system written-scheme instrument.
16HSEHSE managing risk using PPEGreat BritainResidual PPE after higher-order controls.
17Official sourceHSE: pressure systemsGreat BritainSeparate written-scheme examination, imminent-danger and competent-person process
Work-equipment check terms

Table ID: maintenance-inspection-and-testing-of-work-equipment-and-machinery-terms

Source: https://www.sharehub.ltd/knowledge-hub/maintenance-inspection-and-testing-of-work-equipment-and-machinery.html

Row 1

Term

PUWER

Full

Provision and Use of Work Equipment Regulations

Meaning

GB 1998 and NI 1999 are separate workplace-use routes.

Row 2

Term

LOLER

Full

Lifting Operations and Lifting Equipment Regulations

Meaning

GB 1998 and NI 1999 are separate lifting-equipment routes.

Row 3

Term

PSSR

Full

Pressure Systems Safety Regulations

Meaning

GB 2000 and NI 2004 are separate pressure-system routes.

Row 4

Term

WSE

Full

Written scheme of examination

Meaning

Specifies competent examination of a qualifying pressure system.

Row 5

Term

ACOP

Full

Approved Code of Practice

Meaning

Guidance with distinct legal status.

Row 6

Term

PPE

Full

Personal protective equipment

Meaning

Residual protection, not a substitute for safe plant.

Row 7

Term

Functional test

Full

Not an acronym

Meaning

Demonstration that a named protection responds as specified.

Row 8

Term

Thorough examination

Full

Not an acronym

Meaning

Detailed competent examination where lifting law applies.

Row 9

Term

ERICPD

Expansion

Eliminate, Reduce, Isolate, Control, PPE, Discipline

Meaning

A control-selection aid; sustain controls through supervision, maintenance and learning. It creates no separate legal duty.

Read the complete comparison table
Work-equipment check terms
RowTermFullMeaningExpansion
1PUWERProvision and Use of Work Equipment RegulationsGB 1998 and NI 1999 are separate workplace-use routes.
2LOLERLifting Operations and Lifting Equipment RegulationsGB 1998 and NI 1999 are separate lifting-equipment routes.
3PSSRPressure Systems Safety RegulationsGB 2000 and NI 2004 are separate pressure-system routes.
4WSEWritten scheme of examinationSpecifies competent examination of a qualifying pressure system.
5ACOPApproved Code of PracticeGuidance with distinct legal status.
6PPEPersonal protective equipmentResidual protection, not a substitute for safe plant.
7Functional testNot an acronymDemonstration that a named protection responds as specified.
8Thorough examinationNot an acronymDetailed competent examination where lifting law applies.
9ERICPDA control-selection aid; sustain controls through supervision, maintenance and learning. It creates no separate legal duty.Eliminate, Reduce, Isolate, Control, PPE, Discipline