Gas safety and carbon monoxide awareness · detailed source study

Optional reference study from the SHAREhub topic pages and selected source records used for this course. The core learning-time estimate excludes this extended reference.

A changed kitchen needs coordinated competent hand-back
A changed kitchen needs coordinated competent hand-back

Source: gas-safety--practical-interim-gas-safety

An appliance, ventilation, flue and protective interfaces can depend on one another. A change by one trade must not leave the gas installation assumed safe by another. Record the actual appliance and work on extraction, ventilation or connected systems, and who controls each part. For a suspected escape, move away safely and use the appropriate emergency route for the location and fuel; do not investigate or relight equipment. The relevant gas and ventilation specialists verify their functions and interfaces against the actual installation. The operating owner receives identified evidence and restrictions. Keep affected use held if required information or verification is missing. ERICPD is a planning cross-map: Discipline verifies and sustains every control. ESEAP compares effectiveness.

A label does not authorise the task; retain the owner, evidence and stop or change decision.

Suspected leak or CO: leave and call from safety

Source: gas-safety--gas-emergency-jump

Leave, avoid ignition and electrical switching, keep others away and prevent restart. GB natural gas emergency: 0800 111 999; NI natural gas emergency: 0800 002 001; LPG or cylinders: use the supplier emergency contact. Fire, immediate danger or medical emergency: 999. Read the full emergency and medical routes.

Explore this topic in a working scene

Source: gas-safety--share-simulate-scene

Try 3 scenarios with images, explanations and decisions that develop into follow-on situations. Trace how a hazard can cause harm, compare work arrangements and choose controls. Practice progress saves on this device. Fictional outcomes illustrate decisions; completion does not certify competence.

What does gas safety mean at work?

Source: gas-safety--meaning

Gas safety means keeping fuel and other gases contained, using equipment suited to the gas and task, controlling combustion and preventing people being exposed to leaks, fire, explosion, pressure release or oxygen-deficient air. A gas system includes the supply, pipework, valves, appliance, combustion air and flue or exhaust. These parts work together: a well-serviced boiler can become dangerous if a refurbishment blocks its air supply or damages its flue. Gas safety therefore continues between engineer visits. This page covers workplace boilers, kitchens, LPG events and portable gas welding equipment. Facilities staff, operators, contractors and purchasers each control a different part of the risk.

Bulk LNG, gas networks, process furnaces, specialist toxic gases and confined-space work need specialist assessment; this page does not provide commissioning, purging, leak-testing or rescue methods. The practical principles apply across Great Britain and Northern Ireland; legal instruments and emergency routes differ. HSE L56 supplies the GB gas-use framework, while the NI 2004 Regulations and HSENI guidance provide the NI route. HSE L56 Gas Safety Installation and Use ACOP; HSENI Gas safety in commercial catering.

What should I do if I suspect a leak or carbon monoxide?

Source: gas-safety--immediate-action

Leave the affected area, avoid ignition and call from safety: Great Britain natural gas 0800 111 999; Northern Ireland natural gas 0800 002 001; LPG or cylinder gas the supplier’s emergency route. For suspected gas-appliance CO, call the applicable gas emergency route even without symptoms. Obtain urgent medical advice for possible poisoning; call 999 for fire, immediate danger, breathing difficulty, sudden confusion, collapse, weakness, chest or muscle pain after suspected exposure. Do not re-enter or restart until competent advice confirms safety. Avoid smoking, flames and electrical switching in a suspected gas atmosphere, including switching lights or fans off. Close an accessible emergency gas valve and open doors or windows only if you can do so safely without delaying escape or entering danger.

Do not approach or move a heated, fire-affected or leaking cylinder as an untrained responder. Keep others away and follow the site evacuation arrangements. Do not re-enter or restore the supply until the emergency responder and competent gas specialist have made the situation safe and given the appropriate advice. The duty manager records affected equipment, symptoms, isolation and the hand-back decision. Investigate after people are safe; do not postpone emergency action to collect evidence. Medical help is separate from the gas-emergency response. For possible CO symptoms below the emergency threshold, obtain urgent medical advice using NHS 111 in England, NHS 24 on 111 in Scotland or NHS 111 Wales; in NI use the local GP/out-of-hours or emergency-department route. Use 999 for the emergency signs above.

NHS CO medical action; HSENI CO and NI medical help.

How do different gases cause harm?
How do different gases cause harm?

Source: gas-safety--gas-types

Identify the gas from its label and supplier information before choosing equipment or controls. Flammability, toxicity, oxygen displacement, oxidising power and stored pressure are different hazards and may occur together. A fuel gas mixed with air can ignite; confinement can turn rapid burning into a damaging pressure rise. A leaking non-flammable gas can still displace oxygen. Oxygen is not a fuel, but an oxygen-enriched atmosphere makes materials ignite more readily and burn fiercely. No smell does not prove a space is safe. A cylinder colour, a fitting that appears to connect, or a product conformity mark is not proof of compatibility. Read the gas label, appliance data and current manufacturer or supplier instructions together.

How can gas exposure injure people?

Source: gas-safety--harm-chain

A fuel-gas release can reach a person as an ignitable cloud, while faulty combustion can send colourless carbon monoxide into breathing air. Fire and blast cause immediate burns and trauma; inhaled carbon monoxide deprives organs of oxygen and can cause serious illness, death or lasting neurological harm. A non-flammable gas can also displace oxygen in an enclosed space. Follow the whole route from source to person. A damaged hose or fitting may release natural gas or LPG; LPG vapour can collect in a pit or low area before an ignition source starts a fire or explosion. Blocked combustion air or a damaged flue can let carbon monoxide enter an occupied room without a smell. High-pressure releases and falling cylinders create impact and cold-injury risks.

Quantity, enclosure, ventilation, ignition, pressure, exposure time and the people present alter severity. Do not use the absence of smell as evidence of a safe atmosphere. The first decision is to leave, protect others and use the relevant emergency route; diagnosis, atmospheric testing and repair belong to competent specialists. HSE carbon monoxide advice and HSE employer guidance describe these mechanisms and the workplace response.

Why does carbon monoxide need a separate warning?

Source: gas-safety--carbon-monoxide

Carbon monoxide, or CO, is a poisonous gas from incomplete combustion; it has no colour or smell. For a CO alarm or suspected exposure, go outside and call the relevant gas emergency route from safety even without symptoms: GB natural gas 0800 111 999, NI natural gas 0800 002 001, or the LPG supplier. Seek urgent medical advice for suspected poisoning and call 999 for breathing difficulty, sudden confusion, collapse, weakness, chest or muscle pain. Do not re-enter or restart until competent advice confirms safety. Poor combustion, restricted combustion air or defective exhaust arrangements can allow CO to build up. Headache, dizziness, nausea and unusual tiredness are easily mistaken for ordinary illness.

Several people becoming unwell in one area, or symptoms easing outside, are reasons to act, not a diagnosis. Do not wait for a detector reading before seeking help. CO interferes with the body’s oxygen supply and can cause fatal poisoning or lasting harm. Sooting, repeated pilot failure and unexpected flame changes need competent investigation, but the absence of these signs does not establish safety. Some decorative appliances normally show yellow flames; compare with the manufacturer’s intended operation. CO alarms add warning and must be suitable, installed, tested and replaced to their instructions. They do not replace safe installation, maintenance, ventilation or required landlord checks. Alarm positioning and replacement periods are product-specific. HSE carbon monoxide advice. Medical help is separate from the gas-emergency response.

For possible CO symptoms below the emergency threshold, obtain urgent medical advice using NHS 111 in England, NHS 24 on 111 in Scotland or NHS 111 Wales; in NI use the local GP/out-of-hours or emergency-department route. Use 999 for the emergency signs above. NHS CO medical action; HSENI CO and NI medical help.

How should gas risks be reduced?
How should gas risks be reduced?

Source: gas-safety--controls

First ask whether the gas or hot-work task can be removed. Where it remains, reduce the potential release, contain and isolate the supply, control ignition and combustion, and plan for failure before relying on instructions or PPE. For a temporary event, a suitable electric cooking option may remove the need for LPG cylinders and hoses, although electrical capacity and other hazards still need checking. For fabrication, a cold-cutting method may avoid oxy-fuel hot work. If gas is necessary, competent design and installation should provide appropriate containment, ventilation, flues, isolation and protective devices. Keep quantities proportionate to the work, protect pipework and cylinders from vehicles and heat, and control ignition sources where a release could create an explosive atmosphere.

Establish who owns ventilation and safety interlocks, and how faults are reported and repaired. Never defeat an interlock to keep production running. DSEAR assessment determines prevention and mitigation measures; a generic separation distance or gas alarm setpoint is not a substitute. HSE Dangerous Substances and Explosive Atmospheres Regulations. Administrative controls then support the engineered precautions: authorise work, coordinate contractors, check changes, maintain the system and practise evacuation. Use suitable eye, hand, body and other protection for identified residual hazards such as hot work or cylinder handling. Ordinary masks and gloves cannot make an unsafe gas atmosphere acceptable. Escape, emergency intervention and confined-space rescue need separately planned competent arrangements.

How can the five-level hierarchy of controls prevent gas releases, poisoning, fire and explosion?

Source: gas-safety--ericpd

Remove a gas or hot-work task where feasible, then reduce the quantity and release potential, isolate fuel and people, and use engineered combustion, ventilation and ignition controls. Personal protection and reliable training support the system but cannot make a leaking gas atmosphere safe. ERICPD means Eliminate, Reduce or substitute, Isolate, Control, Personal Protective Equipment and Discipline. It is a control-planning framework, not a separate gas law. For fuel gas, containment and competent gas work are central; for CO, safe combustion air and flue performance matter; for cylinders, compatibility, security and a task-specific response matter. The actual design comes from a competent assessment and manufacturer information. The HSE five-level hierarchy is elimination, substitution, engineering controls, administrative controls and PPE.

ERICPD overlaps but separately names Reduce, Isolate and Discipline; its Discipline stage sustains safeguards through maintenance and supervision, rather than blaming a worker. The two are planning lenses, while the applicable GB or NI gas, fire and workplace rules supply the duty. For a temporary catering task, removing LPG may be feasible if electrical capacity and food safety are assessed; if flame is essential, the owner records why and verifies containment, ventilation, ignition controls, emergency arrangements and competent hand-back before service. ERICPD is a planning crossmap. Its prompts do not add a sixth rung or rank Isolate above engineering. Discipline verifies and sustains every control level. Use the five-level table to distinguish physical engineering controls from administrative arrangements. Read the illustration alongside this explanation.

The five-level hierarchy is a control-planning tool. Any claim about a particular standard requires competent review against its current authorised text. Use the five-level table to distinguish physical engineering controls from administrative arrangements. Read the illustration alongside this explanation. ESEAP: Elimination, Substitution, Engineering controls, Administrative controls and PPE. Control order: HSE hierarchy of controls and IOSH hierarchy of control guidance. HSE’s gas and DSEAR guidance sets the legal and practical route; the HSE hierarchy of controls explains the planning order. No table cell authorises a particular purge, leak test, atmospheric entry or rescue method.

What should be checked before during and after use?
What should be checked before during and after use?

Source: gas-safety--appliances

Users check the conditions they have been trained to recognise; competent gas specialists carry out technical gas work. A user check does not include opening the gasway, adjusting combustion or bypassing a safety device. Treat the appliance, ventilation and flue as one system. The following sequence is a SHARE management aid to be adapted to the equipment instructions and local emergency plan, not a technical test procedure. A blocked vent, new extraction fan, partition, extension, changed gas supply or relocated appliance can invalidate earlier assumptions. Reassess before use resumes; last year’s service record does not approve today’s changed installation.

How do LPG and welding cylinders change the controls?

Source: gas-safety--lpg-cylinders

Use a planned storage and handling arrangement for the actual gas, cylinder and site. Keep cylinders secure and protected, use compatible regulators and hoses, and agree the supplier’s emergency route. LPG cylinder and bulk-tank locations need competent siting assessment, including ignition, traffic impact, access, ventilation and low points where vapour could collect. Keep cylinders in their prescribed orientation and move them with suitable equipment. Full and nominally empty cylinders both need control; an empty cylinder can retain hazardous contents. Do not improvise adapters, repair valves or use a flame to find a leak. Portable oxy-fuel equipment needs the right gas, regulators, hose assemblies, non-return valves and flashback arresters. A non-return valve limits reverse flow; it does not stop a flame front.

HSE INDG297 calls for arresters on both oxygen and fuel-gas lines near the regulators, with additional protection for long hose arrangements. Select and maintain the complete assembly with the supplier, and keep oil and grease away from oxygen equipment. HSE INDG297 Gas welding cutting and similar processes. Hot work also needs control of nearby combustibles, hidden voids, fumes, other workers and post-work fire risk. The permit and risk assessment set the task-specific monitoring and fire-watch arrangements; this page does not prescribe an arbitrary duration. Stop for unknown coatings, residues, containers or gas identity and obtain competent assessment. A cylinder involved in fire, or an acetylene cylinder becoming hot or vibrating, requires withdrawal and emergency fire-service help, not an improvised cooling or moving operation.

For welding-fume control, use HSE welding fume: protect workers alongside the actual task assessment; older hot-work publications do not replace current fume advice.

How do gas-safety decisions transfer between sectors?

Source: gas-safety--sector-transfer

The gas and exposure route change with the task. A kitchen needs reliable combustion and extraction; a workshop needs hot-work and cylinder controls; a temporary site needs stable, compatible supply; and a warehouse must prevent LPG leaks and ignition.

What should be checked before during and after use?

Source: gas-safety--compatibility

If the evidence remains incomplete, use an assessed alternative or postpone the gas task. This decision does not require a worker to calculate or guess a pressure, clearance or exposure limit. The exact product instructions and competent assessment control those values.

How would Riverside Leisure Ltd manage a kitchen restart?
How would Riverside Leisure Ltd manage a kitchen restart?

Source: gas-safety--business-example

Riverside Leisure Ltd should release its kitchen after ventilation work only when competent gas checks and operational hand-back show that the changed system is safe. A deadline for reopening does not remove that hold point. This fictional example covers a leisure-centre kitchen with gas cooking appliances, mechanical extraction and a shared service route next to a boiler room. Staff, a visiting ventilation contractor, cleaners and customers may be affected. A planned fan replacement becomes non-routine when the new fan control differs from the original arrangement. For the routine variation, the kitchen supervisor completes the permitted user checks before service and reports changes immediately. For temporary LPG catering, use the compatibility decision above and agree responsibility with the event contractor.

For an abnormal CO alarm after reopening, evacuate and seek help: the earlier hand-back record does not override a new warning. Fictional completed decision: A replacement fan controller does not match the documented kitchen arrangement. The duty manager keeps cooking closed while the gas specialist and ventilation specialist resolve the difference and verify the actual design and protective functions. The hand-back records the corrected controller, the specialists’ check references and closure of the defect. Only then does the nominated Riverside duty manager authorise reopening and brief users. An unresolved defect keeps the kitchen on hold; no invented test value establishes safety.

Who needs which competence?

Source: gas-safety--training

Everyone needs instructions suited to their role, while technical gas work needs task-specific competence and the registration required by the applicable regime. Attendance at an awareness course does not authorise gas engineering. For GB shops, restaurants, schools, hospitals and domestic or sleeping accommodation, gas fitting work must be carried out by an appropriately qualified Gas Safe registered engineer, as HSE states. Certain industrial and other premises fall outside much of GSIUR: a competent person is still required, and residential parts may remain in scope. Do not decide this boundary from the business name alone. For NI, apply the NI Regulations and seek HSENI advice on unusual scope questions. HSE Gas safety for employers; HSENI Gas safety in commercial catering.

Refresh training when tasks, equipment, conditions or observed performance change. Set any local refresher interval through assessment; do not invent a universal gas-awareness certificate expiry. Separate trained observation and operation, an expressly authorised supplier-specific cylinder change, and technical gas-fitting work. Awareness training does not authorise appliance modification, opening gasways, combustion adjustment or bypassing protection.

Which duties apply in Great Britain and Northern Ireland?

Source: gas-safety--legal

Great Britain and Northern Ireland have separate gas-use and general workplace legislation. Determine the premises, activity and dutyholder before applying a requirement, and separate maintenance from landlord checks and product-supply duties. Great Britain: The Gas Safety (Installation and Use) Regulations 1998, as amended, address in-scope gas work and use. Regulation 35 concerns maintaining workplace appliances, installation pipework and flues in a safe condition. General duties under the Health and Safety at Work etc. Act 1974 and risk-management legislation still matter, including where much of GSIUR is excluded. HSE L56 Gas Safety Installation and Use ACOP; Gas Safety Installation and Use Regulations 1998.

Northern Ireland: Use the Gas Safety (Installation and Use) Regulations (Northern Ireland) 2004 and the Health and Safety at Work (Northern Ireland) Order 1978 with the applicable NI risk-management rules. HSENI’s catering guidance confirms the duties to maintain equipment safely and use an appropriately qualified Gas Safe registered engineer for that gas work. The latest available revised instrument is linked; check particular exclusions with HSENI before a detailed legal decision. Gas Safety Installation and Use Regulations Northern Ireland 2004; HSENI Gas safety in commercial catering. Landlord checks are a distinct duty.

Where GB regulation 36 applies to relevant rented accommodation, the landlord must arrange gas safety checks at intervals of no more than 12 months, subject to the statutory timing provisions, as well as maintaining the relevant fittings safely. This does not mean every workplace appliance has a universal annual certificate rule, and a safety check is not the same as servicing. Set maintenance through manufacturer advice and competent assessment. NI regulation 36 requires relevant appliances and flues to be safety-checked within 12 months of installation and at intervals no longer than 12 months afterwards. Until 29 November 2026, do not apply the GB regulation 36A timing provisions to NI checks.

Enacted NI amendments take effect on 30 November 2026, introducing NI timing flexibility and revised recordkeeping. Apply the NI statutory conditions and retain evidence of the deadline calculation; this is not general permission to postpone a check. HSE L56 Gas Safety Installation and Use ACOP; Gas Safety Installation and Use Regulations Northern Ireland 2004. Other regimes: GB DSEAR 2002 and NI DSEAR 2003 address relevant fire and explosion risks. GB PSSR 2000 and NI PSSR 2004 may add written-scheme and examination duties for qualifying pressure systems. A competent specialist must determine scope, exclusions and intervals; not every gas cylinder or boiler has the same examination regime.

Incident reporting must be assessed under the relevant GB or NI reporting rules, with particular gas-reporting duties checked by the responsible person. HSE Dangerous Substances and Explosive Atmospheres Regulations; HSE Pressure systems; HSENI workplace duties. NI DSEAR 2003; NI PSSR 2004. Product supply: Gas appliance conformity requirements concern placing products on the market and putting them into service. Use the separate GB guidance and NI guidance for the actual product and operator. A conformity mark does not approve the selected location, gas supply, installation or ongoing maintenance. Specialist network duties: L80 covers network, gas-conveyor and emergency-service responsibilities. Its safety-case framework should not be represented as an ordinary workplace appliance inspection requirement. HSE L80 Gas Safety Management guidance.

Legal position checked 19 October 2026; review before 30 November 2026: Until 29 November 2026, do not apply the GB regulation 36A timing provisions to NI checks. Enacted NI amendments take effect on 30 November 2026, introducing NI timing flexibility and revised recordkeeping. Apply the NI statutory conditions and retain evidence of the deadline calculation; this is not general permission to postpone a check. HSENI commencement notice; S.R. 2026 No. 178. The competent gas adviser must verify the complete NI conditions, scope and post-work provisions before applying the amendments.

What should managers record and review?
What should managers record and review?

Source: gas-safety--records

Keep evidence that connects each gas risk to an owner, a control and a verified action. A folder of service certificates is insufficient if equipment is missing from the register or unsafe defects remain open. A practical asset record identifies the appliance or supply, location, gas type, flue and ventilation dependencies, isolation points, relevant instructions, service or check basis, contractor and due actions. Preserve installation and commissioning evidence, engineer-category verification, landlord records where applicable, risk and change assessments, defects and formal hand-back. In the risk register, describe a credible event such as “kitchen extraction fails while cooking continues”, the people exposed, preventive and warning barriers, barrier owners and stop/restart conditions. Record the remaining risk and actions with their owners and deadlines.

This is a SHARE assurance approach, not a prescribed statutory form. Sample the workplace as well as the records: can staff identify their emergency contact; is an isolation valve accessible; has an unsafe label been respected; are flues or vents obstructed; do recurring pilot failures or alarm reports receive investigation? Escalate repeated resets, unexplained gas use, missing assets, defective hoses and overdue safety actions. Learn from incidents after making the situation safe. Use the applicable gas law, HSE or HSENI guidance, and manufacturer instructions for the actual appliance. Where a technical standard may be relevant, a competent engineer must consult an authorised current copy. The competent engineer should use current authorised technical standards where relevant, alongside legal duties and the actual manufacturer instructions.

HSE gas safety for employers.

What source should guide a gas-installation decision?

Source: gas-safety--standards-scope

Use the applicable GB or Northern Ireland gas requirements, HSE or HSENI guidance and the actual appliance instructions. A competent engineer must decide whether any additional technical standard applies to the installation using an authorised copy. Gas safety at work controls leaks, fire, explosion and carbon monoxide from gas supplies, appliances, flues, cylinders and hot-work equipment. Apply it: Which part of this plan would you check at the workface before authorising the task? Gas safety at work controls leaks, fire, explosion and carbon monoxide from gas supplies, appliances, flues, cylinders and hot-work equipment. Poor containment or combustion can injure workers and others quickly, even when no gas smell is present.

Retain the work order, category verification, change assessment, isolation and permit record where used, commissioning or service results, open-defect decisions and named hand-back. Apply it: What evidence would show that the change improves this task, rather than only completing a record? The contractors keep the gas and ventilation work coordinated. A difference in controls, missing drawing or damaged flue stops the job at the agreed hold point. The competent specialists confirm the required commissioning and safety checks, including relevant ventilation and protective-device operation. Apply it: At which point would you hold this example, and what evidence would allow it to proceed? Cooking or heating with a faulty flue: CO enters occupied air and is inhaled; headache, confusion, hypoxic injury or death.

LPG cylinder or hose at an event: Leaked vapour accumulates low; ignition causes flash fire, burns or blast trauma. Welding or flame cutting: Fuel escape, oxygen enrichment or flashback reaches a worker; burns, fire or cylinder involvement. Apply it: Who could be exposed, including other trades, cleaners, maintainers and people nearby? Eliminate: Use suitable electric cooking or a cold process instead of temporary LPG or flame cutting where feasible; remove the fuel-gas or hot-work exposure from that task. Reduce or substitute: Use a less hazardous process and the smallest practical gas inventory; avoid unnecessary cylinders and hose runs. Isolate: Contain gas in sound pipework and fittings, provide accessible authorised isolation, segregate cylinders and people, and keep flues and air routes effective.

Control: Engineering: appropriate flame-failure/ventilation interlocks, extraction, detection and ignition controls where assessed. PPE: Use task-specific eye, hand, body or respiratory protection only for assessed residual hot-work or handling exposure. Read the full control table for qualifications, ownership and verification. Use the actual task and applicable jurisdiction; existing technical approval remains unchanged. Apply it: Which stronger option can be used here, and who will verify it before accepting the remaining risk? Use the full topic for the decision points, practical examples, detailed control tables and source scope. HSE guidance applies to Great Britain; use HSENI for the Northern Ireland route and the source’s stated jurisdiction. A simplified guide does not change the page’s technical-review or approval status.

Apply it: Which official source and full-topic section will you use to resolve the next decision? Keep one card or the full set for social sharing, team briefings and learning. Each PDF contains one card per page. Read the full topic for explanations, questions and source links. Use the applicable GB or Northern Ireland gas requirements, HSE or HSENI guidance and the actual appliance instructions. Use the applicable GB or Northern Ireland gas requirements, HSE or HSENI guidance and the actual appliance instructions. A competent engineer must decide whether any additional technical standard applies to the installation using an authorised copy. Gas safety at work controls leaks, fire, explosion and carbon monoxide from gas supplies, appliances, flues, cylinders and hot-work equipment.

Apply it: Which part of this plan would you check at the workface before authorising the task? Use the evidence to improve the actual work arrangement. Gas safety at work controls leaks, fire, explosion and carbon monoxide from gas supplies, appliances, flues, cylinders and hot-work equipment. Poor containment or combustion can injure workers and others quickly, even when no gas smell is present. Retain the work order, category verification, change assessment, isolation and permit record where used, commissioning or service results, open-defect decisions and named hand-back. Apply it: What evidence would show that the change improves this task, rather than only completing a record? Fictional example: a practical application of the existing topic lesson. The contractors keep the gas and ventilation work coordinated.

A difference in controls, missing drawing or damaged flue stops the job at the agreed hold point. The competent specialists confirm the required commissioning and safety checks, including relevant ventilation and protective-device operation. Apply it: At which point would you hold this example, and what evidence would allow it to proceed? Connect the task, the route to the person and the control that can fail. Cooking or heating with a faulty flue: CO enters occupied air and is inhaled; headache, confusion, hypoxic injury or death. LPG cylinder or hose at an event: Leaked vapour accumulates low; ignition causes flash fire, burns or blast trauma. Welding or flame cutting: Fuel escape, oxygen enrichment or flashback reaches a worker; burns, fire or cylinder involvement.

Apply it: Who could be exposed, including other trades, cleaners, maintainers and people nearby? Control summary. Read the complete task-specific controls and checks in the linked topic. Eliminate: Use suitable electric cooking or a cold process instead of temporary LPG or flame cutting where feasible; remove the fuel-gas or hot-work exposure from that task. Reduce or substitute: Use a less hazardous process and the smallest practical gas inventory; avoid unnecessary cylinders and hose runs. Isolate: Contain gas in sound pipework and fittings, provide accessible authorised isolation, segregate cylinders and people, and keep flues and air routes effective. Control: Engineering: appropriate flame-failure/ventilation interlocks, extraction, detection and ignition controls where assessed.

PPE: Use task-specific eye, hand, body or respiratory protection only for assessed residual hot-work or handling exposure. Read the full control table for qualifications, ownership and verification. Use the actual task and applicable jurisdiction; existing technical approval remains unchanged. Apply it: Which stronger option can be used here, and who will verify it before accepting the remaining risk? Follow the official sources below and retain the task-specific evidence. Use the full topic for the decision points, practical examples, detailed control tables and source scope. HSE guidance applies to Great Britain; use HSENI for the Northern Ireland route and the source’s stated jurisdiction. A simplified guide does not change the page’s technical-review or approval status.

Apply it: Which official source and full-topic section will you use to resolve the next decision? Simplified learning guide. Use the full topic and the actual work arrangements; existing technical-review and approval statuses still apply. Workplace scenarios labelled fictional are illustrative examples. Use the applicable GB or Northern Ireland gas requirements, HSE or HSENI guidance and the actual appliance instructions. A competent engineer must decide whether any additional technical standard applies to the installation using an authorised copy. Use current authorised technical standards through the competent engineer where relevant to this installation. HSE gas safety for employers; HSENI commercial catering guidance.

Kitchen extraction replacement and safe hand-back
Kitchen extraction replacement and safe hand-back

Source: gas-safety--example--gas-safety-kitchen-restart

Task And Desired Outcome: Restore the kitchen after replacing extraction equipment while maintaining safe combustion, ventilation and gas safety controls. Task Material And Setting: Existing natural-gas catering appliances in an occupied leisure centre; nearby cleaners and public areas must remain protected. The contractor must identify interactions with other appliances and shared ventilation. People And Prerequisites: The facilities manager verifies the gas engineer’s current registration and relevant commercial catering categories, agrees the ventilation contractor’s scope, obtains instructions and drawings, and assigns one person to control release. Before: Close the affected cooking area, notify users, coordinate isolations and permits through competent people, protect adjacent occupants and establish the emergency route. Record the existing system and defects before changing it.

During: The contractors keep the gas and ventilation work coordinated. A difference in controls, missing drawing or damaged flue stops the job at the agreed hold point. The fan contractor does not bridge a gas interlock or authorise gas use. Hold Or Stop: The manager holds reopening until the gas engineer has assessed the changed arrangement. Gas smell, a CO alarm, symptoms, failed ventilation or uncertain safe isolation require stopping and the appropriate emergency response. Staff do not relight appliances to test a concern. Completion And Hand Back: The competent specialists confirm the required commissioning and safety checks, including relevant ventilation and protective-device operation. The manager confirms defect closure, safe access, restored controls, instructions and user briefing before authorising the kitchen to reopen.

Evidence: Retain the work order, category verification, change assessment, isolation and permit record where used, commissioning or service results, open-defect decisions and named hand-back. Link these to the gas asset register.

Source tables and records 1
Gas emergency contacts and escalation

Table ID: gas-safety-emergency

Source: https://www.sharehub.ltd/knowledge-hub/gas-safety.html

Row 1

Situation

Natural gas leak in Great Britain

Action from safety

Call 0800 111 999, the National Gas Emergency Service. HSE employer advice.

Row 2

Situation

Natural gas leak in Northern Ireland

Action from safety

Call 0800 002 001, the Northern Ireland Gas Emergency Service. NI Direct emergency advice.

Row 3

Situation

LPG or other cylinder gas leak

Action from safety

Contact the LPG or cylinder supplier through its emergency route. If there is fire, an immediate threat to life, a hot acetylene cylinder or a serious injury, move away and call 999.HSE LPG supplier-contact advice (GB); NI gas-use instrument.

Row 4

Situation

CO alarm or suspected exposure

Action from safety

Go outside. For a suspected gas-appliance incident, call 0800 111 999 in GB or 0800 002 001 in NI from safety, even if nobody has symptoms; use the LPG supplier route for LPG. Obtain urgent medical advice for suspected symptoms; call 999 for breathing difficulty, sudden confusion, collapse, weakness, chest or muscle pain after suspected exposure. Do not drive yourself. HSE carbon monoxide advice. In NI use the local GP/out-of-hours or emergency department route, and 999 for an emergency. NI medical escalation advice.

Read the complete comparison table
Gas emergency contacts and escalation
RowSituationAction from safety
1Natural gas leak in Great BritainCall 0800 111 999, the National Gas Emergency Service. HSE employer advice.
2Natural gas leak in Northern IrelandCall 0800 002 001, the Northern Ireland Gas Emergency Service. NI Direct emergency advice.
3LPG or other cylinder gas leakContact the LPG or cylinder supplier through its emergency route. If there is fire, an immediate threat to life, a hot acetylene cylinder or a serious injury, move away and call 999.HSE LPG supplier-contact advice (GB); NI gas-use instrument.
4CO alarm or suspected exposureGo outside. For a suspected gas-appliance incident, call 0800 111 999 in GB or 0800 002 001 in NI from safety, even if nobody has symptoms; use the LPG supplier route for LPG. Obtain urgent medical advice for suspected symptoms; call 999 for breathing difficulty, sudden confusion, collapse, weakness, chest or muscle pain after suspected exposure. Do not drive yourself. HSE carbon monoxide advice. In NI use the local GP/out-of-hours or emergency department route, and 999 for an emergency. NI medical escalation advice.
Gas behaviour and practical decisions

Table ID: gas-safety-gas-behaviour

Source: https://www.sharehub.ltd/knowledge-hub/gas-safety.html

Row 1

Gas or system

Natural gas

What changes the decision

Usually mainly methane and lighter than air. It can still collect in enclosed high spaces or migrate through voids; do not assume it will disperse safely.

Row 2

Gas or system

LPG such as propane or butane

What changes the decision

Stored as a liquid under pressure; released vapour is heavier than air and can accumulate in pits, drains and basements. Choose siting and ventilation for that behaviour. HSE LPG guidance.

Row 3

Gas or system

Carbon monoxide

What changes the decision

A poisonous combustion product, not the odour added to some fuel gases. It can reach occupied areas through a defective flue or inadequate ventilation.

Row 4

Gas or system

Oxygen and fuel gas welding sets

What changes the decision

Control each gas separately: compatible clean equipment, cylinder security, flashback protection and hot-work precautions. Never use oxygen for ventilation or cleaning clothing.

Row 5

Gas or system

Inert compressed gases or cryogenic liquids

What changes the decision

Oxygen displacement and stored-pressure risks remain even when there is no fire hazard. Cryogenic liquids also cause cold injury; obtain specialist system and emergency advice.

Read the complete comparison table
Gas behaviour and practical decisions
RowGas or systemWhat changes the decision
1Natural gasUsually mainly methane and lighter than air. It can still collect in enclosed high spaces or migrate through voids; do not assume it will disperse safely.
2LPG such as propane or butaneStored as a liquid under pressure; released vapour is heavier than air and can accumulate in pits, drains and basements. Choose siting and ventilation for that behaviour. HSE LPG guidance.
3Carbon monoxideA poisonous combustion product, not the odour added to some fuel gases. It can reach occupied areas through a defective flue or inadequate ventilation.
4Oxygen and fuel gas welding setsControl each gas separately: compatible clean equipment, cylinder security, flashback protection and hot-work precautions. Never use oxygen for ventilation or cleaning clothing.
5Inert compressed gases or cryogenic liquidsOxygen displacement and stored-pressure risks remain even when there is no fire hazard. Cryogenic liquids also cause cold injury; obtain specialist system and emergency advice.
Gas harm mechanisms and stop signs

Table ID: gas-safety-harm

Source: https://www.sharehub.ltd/knowledge-hub/gas-safety.html

Row 1

Column 1

Cooking or heating with a faulty flue

Column 2

CO enters occupied air and is inhaled; headache, confusion, hypoxic injury or death. Longer-lasting neurological effects are possible after severe poisoning.

Column 3

CO alarm, several people unwell, symptoms easing outside, sooting or blocked flue: leave, call for help, no restart.

Row 2

Column 1

LPG cylinder or hose at an event

Column 2

Leaked vapour accumulates low; ignition causes flash fire, burns or blast trauma.

Column 3

Gas smell, damaged hose, leaking connection or vapour in a pit: evacuate, avoid ignition, use supplier emergency route.

Row 3

Column 1

Welding or flame cutting

Column 2

Fuel escape, oxygen enrichment or flashback reaches a worker; burns, fire or cylinder involvement.

Column 3

Damaged regulator, flashback sign or heated cylinder: withdraw, raise alarm and use the planned response.

Row 4

Column 1

Inert or compressed gas in an enclosed area

Column 2

Oxygen is displaced or pressure releases suddenly; collapse, asphyxiation or impact injury.

Column 3

Unknown atmosphere, leaking valve or damaged cylinder: keep people out and call competent responders.

Read the complete comparison table
Gas harm mechanisms and stop signs
RowColumn 1Column 2Column 3
1Cooking or heating with a faulty flueCO enters occupied air and is inhaled; headache, confusion, hypoxic injury or death. Longer-lasting neurological effects are possible after severe poisoning.CO alarm, several people unwell, symptoms easing outside, sooting or blocked flue: leave, call for help, no restart.
2LPG cylinder or hose at an eventLeaked vapour accumulates low; ignition causes flash fire, burns or blast trauma.Gas smell, damaged hose, leaking connection or vapour in a pit: evacuate, avoid ignition, use supplier emergency route.
3Welding or flame cuttingFuel escape, oxygen enrichment or flashback reaches a worker; burns, fire or cylinder involvement.Damaged regulator, flashback sign or heated cylinder: withdraw, raise alarm and use the planned response.
4Inert or compressed gas in an enclosed areaOxygen is displaced or pressure releases suddenly; collapse, asphyxiation or impact injury.Unknown atmosphere, leaking valve or damaged cylinder: keep people out and call competent responders.
ERICPD controls for gas tasks

Table ID: gas-safety-ericpd

Source: https://www.sharehub.ltd/knowledge-hub/gas-safety.html

Row 1

Column 1

Eliminate

Column 2

Use suitable electric cooking or a cold process instead of temporary LPG or flame cutting where feasible; remove the fuel-gas or hot-work exposure from that task. Sources: HSE Gas safety for employers; Gas Safety Installation and Use Regulations Northern Ireland 2004.

Column 3

Purchaser and task owner confirm suitability and new electrical or process risks. If gas remains in use, elimination has not occurred.

Column 4

Elimination: remove temporary gas or hot work where a suitable alternative exists.

Row 2

Column 1

Reduce or substitute

Column 2

Use a less hazardous process and the smallest practical gas inventory; avoid unnecessary cylinders and hose runs. Reduce what can be released or ignited. Sources: HSE Liquefied petroleum gas; Gas Safety Installation and Use Regulations Northern Ireland 2004.

Column 3

Designer and manager check demand, supply and stock. Large unneeded stores or repeated hose damage trigger redesign.

Column 4

Substitution when electric or a lower-hazard process replaces gas; reducing inventory is ERICPD Reduce, not substitution by itself.

Row 3

Column 1

Isolate

Column 2

Contain gas in sound pipework and fittings, provide accessible authorised isolation, segregate cylinders and people, and keep flues and air routes effective. Sources: HSE Gas safety for employers; HSENI Gas safety in commercial catering.

Column 3

Competent gas specialist verifies installation and maintenance; manager checks damage, access and ventilation. Leak or obstructed flue means hold use.

Column 4

Engineering: sound containment, authorised isolation and separation from people.

Row 4

Column 1

Control

Column 2

Engineering: appropriate flame-failure/ventilation interlocks, extraction, detection and ignition controls where assessed. Administrative: DSEAR assessment, permits, inspection, emergency plan and competent hand-back. Sources: HSE Dangerous Substances and Explosive Atmospheres Regulations; Northern Ireland DSEAR 2003.

Column 3

Engineer validates safety functions; supervisor checks defects and evacuation readiness. Failed extraction, alarm or defeated interlock means stop.

Column 4

Engineering first for interlocks and ventilation; administrative controls then maintain, permit and respond.

Row 5

Column 1

PPE

Column 2

Use task-specific eye, hand, body or respiratory protection only for assessed residual hot-work or handling exposure. PPE cannot stop explosion, oxygen displacement or CO poisoning. Sources: HSE Managing risk using PPE; HSENI Personal protective equipment.

Column 3

Supervisor checks fit, condition and supplier instructions. Wrong protection or an unsafe atmosphere calls for withdrawal.

Column 4

PPE only for assessed residual hot-work or handling harm, never a gas atmosphere.

Row 6

Column 1

Discipline

Column 2

Train users to recognise leaks and CO signs, check engineer work category, report defects, rehearse evacuation and keep equipment out of service until release. Sources: HSE Gas safety for employers; HSENI Gas safety in commercial catering.

Column 3

Manager samples competence and action closure. Repeated resets or ignored alarms show the system is failing.

Column 4

Administrative sustainment: train, inspect, supervise and learn; it cannot replace engineering.

Read the complete comparison table
ERICPD controls for gas tasks
RowColumn 1Column 2Column 3Column 4
1EliminateUse suitable electric cooking or a cold process instead of temporary LPG or flame cutting where feasible; remove the fuel-gas or hot-work exposure from that task. Sources: HSE Gas safety for employers; Gas Safety Installation and Use Regulations Northern Ireland 2004.Purchaser and task owner confirm suitability and new electrical or process risks. If gas remains in use, elimination has not occurred.Elimination: remove temporary gas or hot work where a suitable alternative exists.
2Reduce or substituteUse a less hazardous process and the smallest practical gas inventory; avoid unnecessary cylinders and hose runs. Reduce what can be released or ignited. Sources: HSE Liquefied petroleum gas; Gas Safety Installation and Use Regulations Northern Ireland 2004.Designer and manager check demand, supply and stock. Large unneeded stores or repeated hose damage trigger redesign.Substitution when electric or a lower-hazard process replaces gas; reducing inventory is ERICPD Reduce, not substitution by itself.
3IsolateContain gas in sound pipework and fittings, provide accessible authorised isolation, segregate cylinders and people, and keep flues and air routes effective. Sources: HSE Gas safety for employers; HSENI Gas safety in commercial catering.Competent gas specialist verifies installation and maintenance; manager checks damage, access and ventilation. Leak or obstructed flue means hold use.Engineering: sound containment, authorised isolation and separation from people.
4ControlEngineering: appropriate flame-failure/ventilation interlocks, extraction, detection and ignition controls where assessed. Administrative: DSEAR assessment, permits, inspection, emergency plan and competent hand-back. Sources: HSE Dangerous Substances and Explosive Atmospheres Regulations; Northern Ireland DSEAR 2003.Engineer validates safety functions; supervisor checks defects and evacuation readiness. Failed extraction, alarm or defeated interlock means stop.Engineering first for interlocks and ventilation; administrative controls then maintain, permit and respond.
5PPEUse task-specific eye, hand, body or respiratory protection only for assessed residual hot-work or handling exposure. PPE cannot stop explosion, oxygen displacement or CO poisoning. Sources: HSE Managing risk using PPE; HSENI Personal protective equipment.Supervisor checks fit, condition and supplier instructions. Wrong protection or an unsafe atmosphere calls for withdrawal.PPE only for assessed residual hot-work or handling harm, never a gas atmosphere.
6DisciplineTrain users to recognise leaks and CO signs, check engineer work category, report defects, rehearse evacuation and keep equipment out of service until release. Sources: HSE Gas safety for employers; HSENI Gas safety in commercial catering.Manager samples competence and action closure. Repeated resets or ignored alarms show the system is failing.Administrative sustainment: train, inspect, supervise and learn; it cannot replace engineering.
Five-level hierarchy of controls for gas safety

Table ID: gas-safety-ericpd-eseap

Source: https://www.sharehub.ltd/knowledge-hub/gas-safety.html

Row 1

Column 1

Elimination

Column 2

Remove an unnecessary gas or hot-work task; a suitable electric or cold process can eliminate fuel gas from that task.

Column 3

Purchaser and task owner confirm that gas is removed and assess replacement risks.

Column 4

HSE Gas safety for employers · Gas Safety Installation and Use Regulations Northern Ireland 2004 · HSE Liquefied petroleum gas · HSENI Gas safety in commercial catering · HSE Dangerous Substances and Explosive Atmospheres Regulations · Northern Ireland DSEAR 2003 · HSE Managing risk using PPE · HSENI Personal protective equipment

Row 2

Column 1

Substitution

Column 2

Where the hazardous task remains, replace it with a demonstrably less hazardous suitable process or product. Reducing cylinder inventory or hose length alone is reduction, not substitution.

Column 3

Competent assessor compares the actual alternatives and checks new risks before approval.

Column 4

HSE Gas safety for employers · Gas Safety Installation and Use Regulations Northern Ireland 2004 · HSE Liquefied petroleum gas · HSENI Gas safety in commercial catering · HSE Dangerous Substances and Explosive Atmospheres Regulations · Northern Ireland DSEAR 2003 · HSE Managing risk using PPE · HSENI Personal protective equipment

Row 3

Column 1

Engineering controls

Column 2

Containment, sound pipework, ventilation, flues, engineered isolation, flame-failure or ventilation interlocks, extraction, detection and ignition controls physically interrupt the release or harm route.

Column 3

Gas and ventilation specialists verify the relevant system against its design. Failed protection means hold and no restart.

Column 4

HSE Gas safety for employers · Gas Safety Installation and Use Regulations Northern Ireland 2004 · HSE Liquefied petroleum gas · HSENI Gas safety in commercial catering · HSE Dangerous Substances and Explosive Atmospheres Regulations · Northern Ireland DSEAR 2003 · HSE Managing risk using PPE · HSENI Personal protective equipment

Row 4

Column 1

Administrative controls

Column 2

Assess the task; verify engineer competence and gas-work category; coordinate permits, inspection, maintenance, emergency planning and named hand-back.

Column 3

Duty manager checks records and actual practice. Inspection programmes support engineering; they do not replace it.

Column 4

HSE Gas safety for employers · Gas Safety Installation and Use Regulations Northern Ireland 2004 · HSE Liquefied petroleum gas · HSENI Gas safety in commercial catering · HSE Dangerous Substances and Explosive Atmospheres Regulations · Northern Ireland DSEAR 2003 · HSE Managing risk using PPE · HSENI Personal protective equipment

Row 5

Column 1

PPE

Column 2

Use task-specific protection for assessed residual hot-work or handling risks. Ordinary PPE cannot make a leaking gas atmosphere safe.

Column 3

Supervisor checks selection and condition; escape and rescue require separately planned competent arrangements.

Column 4

HSE Gas safety for employers · Gas Safety Installation and Use Regulations Northern Ireland 2004 · HSE Liquefied petroleum gas · HSENI Gas safety in commercial catering · HSE Dangerous Substances and Explosive Atmospheres Regulations · Northern Ireland DSEAR 2003 · HSE Managing risk using PPE · HSENI Personal protective equipment

Read the complete comparison table
Five-level hierarchy of controls for gas safety
RowColumn 1Column 2Column 3Column 4
1EliminationRemove an unnecessary gas or hot-work task; a suitable electric or cold process can eliminate fuel gas from that task.Purchaser and task owner confirm that gas is removed and assess replacement risks.HSE Gas safety for employers · Gas Safety Installation and Use Regulations Northern Ireland 2004 · HSE Liquefied petroleum gas · HSENI Gas safety in commercial catering · HSE Dangerous Substances and Explosive Atmospheres Regulations · Northern Ireland DSEAR 2003 · HSE Managing risk using PPE · HSENI Personal protective equipment
2SubstitutionWhere the hazardous task remains, replace it with a demonstrably less hazardous suitable process or product. Reducing cylinder inventory or hose length alone is reduction, not substitution.Competent assessor compares the actual alternatives and checks new risks before approval.HSE Gas safety for employers · Gas Safety Installation and Use Regulations Northern Ireland 2004 · HSE Liquefied petroleum gas · HSENI Gas safety in commercial catering · HSE Dangerous Substances and Explosive Atmospheres Regulations · Northern Ireland DSEAR 2003 · HSE Managing risk using PPE · HSENI Personal protective equipment
3Engineering controlsContainment, sound pipework, ventilation, flues, engineered isolation, flame-failure or ventilation interlocks, extraction, detection and ignition controls physically interrupt the release or harm route.Gas and ventilation specialists verify the relevant system against its design. Failed protection means hold and no restart.HSE Gas safety for employers · Gas Safety Installation and Use Regulations Northern Ireland 2004 · HSE Liquefied petroleum gas · HSENI Gas safety in commercial catering · HSE Dangerous Substances and Explosive Atmospheres Regulations · Northern Ireland DSEAR 2003 · HSE Managing risk using PPE · HSENI Personal protective equipment
4Administrative controlsAssess the task; verify engineer competence and gas-work category; coordinate permits, inspection, maintenance, emergency planning and named hand-back.Duty manager checks records and actual practice. Inspection programmes support engineering; they do not replace it.HSE Gas safety for employers · Gas Safety Installation and Use Regulations Northern Ireland 2004 · HSE Liquefied petroleum gas · HSENI Gas safety in commercial catering · HSE Dangerous Substances and Explosive Atmospheres Regulations · Northern Ireland DSEAR 2003 · HSE Managing risk using PPE · HSENI Personal protective equipment
5PPEUse task-specific protection for assessed residual hot-work or handling risks. Ordinary PPE cannot make a leaking gas atmosphere safe.Supervisor checks selection and condition; escape and rescue require separately planned competent arrangements.HSE Gas safety for employers · Gas Safety Installation and Use Regulations Northern Ireland 2004 · HSE Liquefied petroleum gas · HSENI Gas safety in commercial catering · HSE Dangerous Substances and Explosive Atmospheres Regulations · Northern Ireland DSEAR 2003 · HSE Managing risk using PPE · HSENI Personal protective equipment
Gas appliance operating checks

Table ID: gas-safety-use-checks

Source: https://www.sharehub.ltd/knowledge-hub/gas-safety.html

Row 1

When

Before use

User or supervisor decision

Confirm the equipment is authorised for this task and location, no unsafe label or unresolved defect remains, air openings and exhaust routes appear unobstructed, and emergency contacts and exits are known. If a required service or check is overdue, escalate for a safe-use decision; do not silently extend the interval.

Row 2

When

During use

User or supervisor decision

Follow the start and stop instructions. Report gas smell, alarms, unusual flame or soot, damaged connections, failing extraction or anyone becoming unwell. Stop on these triggers and use the relevant emergency or defect route.

Row 3

When

After use

User or supervisor decision

Shut down and isolate as required by the equipment instructions and local procedure. Leave safe access, report faults, and secure cylinders or supplies through the authorised routine.

Row 4

When

After alteration or maintenance

User or supervisor decision

Hold use until the competent specialist confirms required tests, protective devices, flue and ventilation checks, defect closure and safe hand-back. Tell affected users what changed.

Read the complete comparison table
Gas appliance operating checks
RowWhenUser or supervisor decision
1Before useConfirm the equipment is authorised for this task and location, no unsafe label or unresolved defect remains, air openings and exhaust routes appear unobstructed, and emergency contacts and exits are known. If a required service or check is overdue, escalate for a safe-use decision; do not silently extend the interval.
2During useFollow the start and stop instructions. Report gas smell, alarms, unusual flame or soot, damaged connections, failing extraction or anyone becoming unwell. Stop on these triggers and use the relevant emergency or defect route.
3After useShut down and isolate as required by the equipment instructions and local procedure. Leave safe access, report faults, and secure cylinders or supplies through the authorised routine.
4After alteration or maintenanceHold use until the competent specialist confirms required tests, protective devices, flue and ventilation checks, defect closure and safe hand-back. Tell affected users what changed.
LPG appliance compatibility worked decision

Table ID: gas-safety-selection

Source: https://www.sharehub.ltd/knowledge-hub/gas-safety.html

Row 1

Evidence required

Appliance identity and instructions

How it changes the decision

Confirm the model, fuel family, permitted operating environment and any conversion status. If unknown, quarantine pending supplier evidence. Sources: GOV UK Gas appliances Great Britain; GOV UK Gas appliances Northern Ireland.

Row 2

Evidence required

Supply and regulator specifications

How it changes the decision

The competent installer checks gas type, inlet and outlet requirements, pressure, capacity and connections against the appliance instructions. Do not substitute a generic pressure. Sources: HSE Liquefied petroleum gas; Gas Safety Installation and Use Regulations Northern Ireland 2004.

Row 3

Evidence required

Hoses connections and cylinder arrangement

How it changes the decision

Check approved components, condition, routing, heat and impact protection, orientation and replacement criteria. Apparent physical fit is insufficient. Sources: HSE Liquefied petroleum gas; Gas Safety Installation and Use Regulations Northern Ireland 2004.

Row 4

Evidence required

Location and ventilation

How it changes the decision

Assess the actual enclosure, air supply, exhaust, public access and nearby drains or ignition sources. A roofed or partly enclosed setting is not automatically an outdoor installation. Sources: HSE Liquefied petroleum gas; HSENI Gas safety in commercial catering.

Row 5

Evidence required

Commissioning and hand-back

How it changes the decision

The appropriate competent engineer verifies the assembled installation and its safety devices and records the result. Users receive operating and emergency instructions before release. Sources: HSE Gas safety for employers; HSENI Gas safety in commercial catering.

Read the complete comparison table
LPG appliance compatibility worked decision
RowEvidence requiredHow it changes the decision
1Appliance identity and instructionsConfirm the model, fuel family, permitted operating environment and any conversion status. If unknown, quarantine pending supplier evidence. Sources: GOV UK Gas appliances Great Britain; GOV UK Gas appliances Northern Ireland.
2Supply and regulator specificationsThe competent installer checks gas type, inlet and outlet requirements, pressure, capacity and connections against the appliance instructions. Do not substitute a generic pressure. Sources: HSE Liquefied petroleum gas; Gas Safety Installation and Use Regulations Northern Ireland 2004.
3Hoses connections and cylinder arrangementCheck approved components, condition, routing, heat and impact protection, orientation and replacement criteria. Apparent physical fit is insufficient. Sources: HSE Liquefied petroleum gas; Gas Safety Installation and Use Regulations Northern Ireland 2004.
4Location and ventilationAssess the actual enclosure, air supply, exhaust, public access and nearby drains or ignition sources. A roofed or partly enclosed setting is not automatically an outdoor installation. Sources: HSE Liquefied petroleum gas; HSENI Gas safety in commercial catering.
5Commissioning and hand-backThe appropriate competent engineer verifies the assembled installation and its safety devices and records the result. Users receive operating and emergency instructions before release. Sources: HSE Gas safety for employers; HSENI Gas safety in commercial catering.
Gas-safety competence by role

Table ID: gas-safety-competence

Source: https://www.sharehub.ltd/knowledge-hub/gas-safety.html

Row 1

Column 1

Nearby staff and new starters

Column 2

Recognise gas smell, CO symptoms, alarm, evacuation and whom to call; demonstrate the leave-and-report route.

Column 3

Supervisor checks understanding and records induction; repeat after site or emergency-plan change.

Row 2

Column 1

Appliance users and cylinder handlers

Column 2

Practise the authorised user checks, correct product identity, ventilation and stop triggers on the actual task.

Column 3

Supervisor observes a practical demonstration and records authorisation; reassess after equipment, gas or task change.

Row 3

Column 1

Gas specialists and maintainers

Column 2

Prove competence and, where GSIUR applies, current Gas Safe registration for the precise gas and appliance work category. Use the site and manufacturer method.

Column 3

Dutyholder checks ID/category and receives work/hand-back record; verify scope for each new type of work or changed installation.

Row 4

Column 1

Supervisors and contractor coordinators

Column 2

Challenge unknown compatibility, failed extraction, incomplete isolation or defective work; demonstrate a hold and release decision.

Column 3

Manager samples decisions and defect closure; reassess after an incident, change or observed gap.

Row 5

Column 1

Managers, purchasers and safety advisers

Column 2

Specify gas and premises scope, competent work, emergency response, maintenance evidence and GB/NI legal route.

Column 3

Accountable manager reviews asset, contractor and action evidence; update when law, system or risk changes.

Read the complete comparison table
Gas-safety competence by role
RowColumn 1Column 2Column 3
1Nearby staff and new startersRecognise gas smell, CO symptoms, alarm, evacuation and whom to call; demonstrate the leave-and-report route.Supervisor checks understanding and records induction; repeat after site or emergency-plan change.
2Appliance users and cylinder handlersPractise the authorised user checks, correct product identity, ventilation and stop triggers on the actual task.Supervisor observes a practical demonstration and records authorisation; reassess after equipment, gas or task change.
3Gas specialists and maintainersProve competence and, where GSIUR applies, current Gas Safe registration for the precise gas and appliance work category. Use the site and manufacturer method.Dutyholder checks ID/category and receives work/hand-back record; verify scope for each new type of work or changed installation.
4Supervisors and contractor coordinatorsChallenge unknown compatibility, failed extraction, incomplete isolation or defective work; demonstrate a hold and release decision.Manager samples decisions and defect closure; reassess after an incident, change or observed gap.
5Managers, purchasers and safety advisersSpecify gas and premises scope, competent work, emergency response, maintenance evidence and GB/NI legal route.Accountable manager reviews asset, contractor and action evidence; update when law, system or risk changes.
Source tables and records 2
Official source, jurisdiction and supported decision

Table ID: gas-safety-official-links

Source: https://www.sharehub.ltd/knowledge-hub/gas-safety.html

Row 1

Column 1

HSE ACOP and guidance

Column 2

HSE L56 Gas Safety Installation and Use ACOP

Column 3

Great Britain

Column 4

HSE ACOP and guidance · Great Britain · Fifth edition 2018 · Scope, competence, maintenance and landlord duties; use with current legislation.

Row 2

Column 1

HSE guidance

Column 2

HSE Gas safety for employers

Column 3

Great Britain

Column 4

HSE guidance · Great Britain · Live guidance; publication date not stated · Workplace maintenance, competence boundaries and emergency action.

Row 3

Column 1

HSENI guidance

Column 2

HSENI Gas safety in commercial catering

Column 3

Northern Ireland

Column 4

HSENI guidance · Northern Ireland · 17 August 2022 · NI employer maintenance and category-specific Gas Safe verification; historical inspection campaign dates are not current deadlines.

Row 4

Column 1

Legislation

Column 2

Gas Safety Installation and Use Regulations Northern Ireland 2004

Column 3

Northern Ireland

Column 4

Legislation · Northern Ireland · 2004 No 63 as amended; latest available revised text checked · NI legal baseline. Current contents and regulation 36 checked; obtain HSENI advice for unusual premises and detailed application.

Row 5

Column 1

Legislation

Column 2

Gas Safety Installation and Use Regulations 1998

Column 3

Great Britain

Column 4

Legislation · Great Britain · 1998 No 2451 as amended · GB gas fittings and use duties. Consolidated endpoint accessible on direct recheck; current interpretation checked against HSE L56 and employer guidance.

Row 6

Column 1

Northern Ireland government guidance

Column 2

NI Direct Gas emergency service

Column 3

Northern Ireland

Column 4

Northern Ireland government guidance · Northern Ireland · Live guidance; publication date not stated · Northern Ireland natural gas emergency number and actions.

Row 7

Column 1

HSENI guidance

Column 2

HSENI Carbon monoxide

Column 3

Northern Ireland

Column 4

HSENI guidance · Northern Ireland · live guidance. CO hazards, symptoms, response and NI gas emergency number.

Row 8

Column 1

HSE guidance

Column 2

HSE Liquefied petroleum gas

Column 3

Great Britain

Column 4

HSE guidance · Great Britain · Updated 16 March 2023 · LPG behaviour, bulk installation and pipework management route.

Row 9

Column 1

HSE guidance

Column 2

HSE INDG297 Gas welding cutting and similar processes

Column 3

Great Britain

Column 4

HSE guidance · Great Britain · 2012 revision · Portable oxy-fuel equipment, flashback and oxygen precautions; current supplier instructions and current fume guidance also apply.

Row 10

Column 1

HSE guidance

Column 2

HSE HSG139 Compressed gases in welding and flame cutting

Column 3

Great Britain

Column 4

HSE guidance · Great Britain · First edition 1997 · Retained engineering explanation for compressed gases. Historical legal, standards and equipment references require current verification.

Row 11

Column 1

HSE guidance

Column 2

HSE Pressure systems

Column 3

Great Britain

Column 4

HSE guidance · Great Britain · Live guidance; site update 15 March 2023 · Determine PSSR scope, written scheme and examination requirements. The retained INDG261 is a 2012 background guide, not a cylinder examination schedule.

Row 12

Column 1

HSE regulatory guidance

Column 2

HSE Dangerous Substances and Explosive Atmospheres Regulations

Column 3

Great Britain

Column 4

HSE regulatory guidance · Great Britain · Updated 14 October 2024 · Assessment, prevention and mitigation of fire and explosion risks.

Row 13

Column 1

HSE guidance

Column 2

HSE L80 Gas Safety Management guidance

Column 3

Great Britain

Column 4

HSE guidance · Great Britain · Third edition April 2024 · Specialist network and emergency-service dutyholders; not a general appliance maintenance certificate.

Row 14

Column 1

GOV UK product guidance

Column 2

GOV UK Gas appliances Great Britain

Column 3

Great Britain

Column 4

GOV UK product guidance · Great Britain · Live guidance; check linked update history · Product supply and conformity obligations, separate from safe installation and workplace use.

Row 15

Column 1

GOV UK product guidance

Column 2

GOV UK Gas appliances Northern Ireland

Column 3

Northern Ireland

Column 4

GOV UK product guidance · Northern Ireland · Live guidance; check linked update history · NI product-supply regime under Regulation EU 2016/426; verify economic operator and conformity route.

Row 16

Column 1

HSENI guidance

Column 2

HSENI Getting started: workplace duties

Column 3

Northern Ireland

Column 4

Regulator · Northern Ireland · Live site · Verification route for NI general workplace, DSEAR, pressure-system and reporting duties where a specialist assessment is needed.

Row 17

Column 1

HSE guidance

Column 2

HSE Managing risk using PPE

Column 3

Great Britain

Column 4

HSE guidance · Great Britain · Live guidance; page date not stated. PPE after higher controls and its limits.

Row 18

Column 1

Legislation

Column 2

Northern Ireland DSEAR 2003

Column 3

Northern Ireland

Column 4

Legislation · Northern Ireland · 2003 No. 152, as amended. NI fire and explosion assessment and control for dangerous substances.

Row 19

Column 1

Legislation

Column 2

Northern Ireland PSSR 2004

Column 3

Northern Ireland

Column 4

Legislation · Northern Ireland · 2004 No. 222, as amended. NI pressure-system scope, written scheme and examination duties, subject to exclusions.

Row 20

Column 1

HSENI guidance

Column 2

HSENI Personal protective equipment

Column 3

Northern Ireland

Column 4

HSENI guidance · Northern Ireland · Live guidance; date not stated. NI PPE as last resort after other controls.

Row 21

Column 1

HSE ACOP and guidance

Column 2

HSE Rider-operated lift trucks L117

Column 3

Great Britain

Column 4

Lift-truck operation and LPG refuelling/cylinder-change guidance; apply NI law separately where relevant.

Row 22

Column 1

Government guidance

Column 2

HSE carbon monoxide advice

Column 3

Great Britain

Column 4

CO symptoms, immediate evacuation and urgent medical advice; apply the NI emergency route separately.

Row 23

Column 1

Government guidance

Column 2

HSE check a gas engineer

Column 3

Great Britain

Column 4

Check current engineer identity and relevant work categories; confirm NI requirements separately.

Row 24

Column 1

NHS

Column 2

NHS carbon monoxide: medical help

Column 3

Great Britain

Column 4

Medical escalation for suspected carbon-monoxide exposure. Reviewed 16 December 2025. Checked 2026-10-19. Verified primary web source; guide approval pending

Row 25

Column 1

HSENI

Column 2

HSENI NI gas amendments: 30 November 2026 commencement

Column 3

Northern Ireland

Column 4

Enacted future NI timing and recordkeeping change; not permission to postpone checks. 13 October 2026. Checked 2026-10-19. Verified primary web source; guide approval pending

Row 26

Column 1

legislation.gov.uk

Column 2

NI gas amendment regulations 2026, S.R. No. 178

Column 3

Northern Ireland

Column 4

Enacted instrument locator; full statutory conditions require technical verification before commencement. Made 13 October 2026; commences 30 November 2026. Checked 2026-10-19. Regulator notice verified; complete instrument retrieval not established

Row 27

Column 1

HSE

Column 2

HSE welding fume: protect workers

Column 3

Great Britain

Column 4

Task-specific welding-fume control signpost. Current guidance locator; technical approval pending. Checked 2026-10-19. Verified primary web source; guide approval pending

Read the complete comparison table
Official source, jurisdiction and supported decision
RowColumn 1Column 2Column 3Column 4
1HSE ACOP and guidanceHSE L56 Gas Safety Installation and Use ACOPGreat BritainHSE ACOP and guidance · Great Britain · Fifth edition 2018 · Scope, competence, maintenance and landlord duties; use with current legislation.
2HSE guidanceHSE Gas safety for employersGreat BritainHSE guidance · Great Britain · Live guidance; publication date not stated · Workplace maintenance, competence boundaries and emergency action.
3HSENI guidanceHSENI Gas safety in commercial cateringNorthern IrelandHSENI guidance · Northern Ireland · 17 August 2022 · NI employer maintenance and category-specific Gas Safe verification; historical inspection campaign dates are not current deadlines.
4LegislationGas Safety Installation and Use Regulations Northern Ireland 2004Northern IrelandLegislation · Northern Ireland · 2004 No 63 as amended; latest available revised text checked · NI legal baseline. Current contents and regulation 36 checked; obtain HSENI advice for unusual premises and detailed application.
5LegislationGas Safety Installation and Use Regulations 1998Great BritainLegislation · Great Britain · 1998 No 2451 as amended · GB gas fittings and use duties. Consolidated endpoint accessible on direct recheck; current interpretation checked against HSE L56 and employer guidance.
6Northern Ireland government guidanceNI Direct Gas emergency serviceNorthern IrelandNorthern Ireland government guidance · Northern Ireland · Live guidance; publication date not stated · Northern Ireland natural gas emergency number and actions.
7HSENI guidanceHSENI Carbon monoxideNorthern IrelandHSENI guidance · Northern Ireland · live guidance. CO hazards, symptoms, response and NI gas emergency number.
8HSE guidanceHSE Liquefied petroleum gasGreat BritainHSE guidance · Great Britain · Updated 16 March 2023 · LPG behaviour, bulk installation and pipework management route.
9HSE guidanceHSE INDG297 Gas welding cutting and similar processesGreat BritainHSE guidance · Great Britain · 2012 revision · Portable oxy-fuel equipment, flashback and oxygen precautions; current supplier instructions and current fume guidance also apply.
10HSE guidanceHSE HSG139 Compressed gases in welding and flame cuttingGreat BritainHSE guidance · Great Britain · First edition 1997 · Retained engineering explanation for compressed gases. Historical legal, standards and equipment references require current verification.
11HSE guidanceHSE Pressure systemsGreat BritainHSE guidance · Great Britain · Live guidance; site update 15 March 2023 · Determine PSSR scope, written scheme and examination requirements. The retained INDG261 is a 2012 background guide, not a cylinder examination schedule.
12HSE regulatory guidanceHSE Dangerous Substances and Explosive Atmospheres RegulationsGreat BritainHSE regulatory guidance · Great Britain · Updated 14 October 2024 · Assessment, prevention and mitigation of fire and explosion risks.
13HSE guidanceHSE L80 Gas Safety Management guidanceGreat BritainHSE guidance · Great Britain · Third edition April 2024 · Specialist network and emergency-service dutyholders; not a general appliance maintenance certificate.
14GOV UK product guidanceGOV UK Gas appliances Great BritainGreat BritainGOV UK product guidance · Great Britain · Live guidance; check linked update history · Product supply and conformity obligations, separate from safe installation and workplace use.
15GOV UK product guidanceGOV UK Gas appliances Northern IrelandNorthern IrelandGOV UK product guidance · Northern Ireland · Live guidance; check linked update history · NI product-supply regime under Regulation EU 2016/426; verify economic operator and conformity route.
16HSENI guidanceHSENI Getting started: workplace dutiesNorthern IrelandRegulator · Northern Ireland · Live site · Verification route for NI general workplace, DSEAR, pressure-system and reporting duties where a specialist assessment is needed.
17HSE guidanceHSE Managing risk using PPEGreat BritainHSE guidance · Great Britain · Live guidance; page date not stated. PPE after higher controls and its limits.
18LegislationNorthern Ireland DSEAR 2003Northern IrelandLegislation · Northern Ireland · 2003 No. 152, as amended. NI fire and explosion assessment and control for dangerous substances.
19LegislationNorthern Ireland PSSR 2004Northern IrelandLegislation · Northern Ireland · 2004 No. 222, as amended. NI pressure-system scope, written scheme and examination duties, subject to exclusions.
20HSENI guidanceHSENI Personal protective equipmentNorthern IrelandHSENI guidance · Northern Ireland · Live guidance; date not stated. NI PPE as last resort after other controls.
21HSE ACOP and guidanceHSE Rider-operated lift trucks L117Great BritainLift-truck operation and LPG refuelling/cylinder-change guidance; apply NI law separately where relevant.
22Government guidanceHSE carbon monoxide adviceGreat BritainCO symptoms, immediate evacuation and urgent medical advice; apply the NI emergency route separately.
23Government guidanceHSE check a gas engineerGreat BritainCheck current engineer identity and relevant work categories; confirm NI requirements separately.
24NHSNHS carbon monoxide: medical helpGreat BritainMedical escalation for suspected carbon-monoxide exposure. Reviewed 16 December 2025. Checked 2026-10-19. Verified primary web source; guide approval pending
25HSENIHSENI NI gas amendments: 30 November 2026 commencementNorthern IrelandEnacted future NI timing and recordkeeping change; not permission to postpone checks. 13 October 2026. Checked 2026-10-19. Verified primary web source; guide approval pending
26legislation.gov.ukNI gas amendment regulations 2026, S.R. No. 178Northern IrelandEnacted instrument locator; full statutory conditions require technical verification before commencement. Made 13 October 2026; commences 30 November 2026. Checked 2026-10-19. Regulator notice verified; complete instrument retrieval not established
27HSEHSE welding fume: protect workersGreat BritainTask-specific welding-fume control signpost. Current guidance locator; technical approval pending. Checked 2026-10-19. Verified primary web source; guide approval pending
Gas safety terms

Table ID: gas-safety-terms

Source: https://www.sharehub.ltd/knowledge-hub/gas-safety.html

Row 1

Column 1

LPG

Column 2

Liquefied petroleum gas

Column 3

Usually propane or butane; released vapour can collect at low level.

Row 2

Column 1

CO

Column 2

Carbon monoxide

Column 3

Poisonous, colourless and odourless gas from incomplete combustion.

Row 3

Column 1

GSIUR

Column 2

Gas Safety (Installation and Use) Regulations

Column 3

Separate GB 1998 and NI 2004 instruments govern in-scope gas work and use.

Row 4

Column 1

DSEAR

Column 2

Dangerous Substances and Explosive Atmospheres Regulations

Column 3

GB and NI regimes for preventing and controlling fire and explosion risks.

Row 5

Column 1

PSSR

Column 2

Pressure Systems Safety Regulations

Column 3

May require a written scheme and examination for systems within scope.

Row 6

Column 1

Flue

Column 2

—

Column 3

Route carrying combustion products away from an appliance.

Row 7

Column 1

Flashback

Column 2

—

Column 3

Flame travelling back through gas welding equipment.

Read the complete comparison table
Gas safety terms
RowColumn 1Column 2Column 3
1LPGLiquefied petroleum gasUsually propane or butane; released vapour can collect at low level.
2COCarbon monoxidePoisonous, colourless and odourless gas from incomplete combustion.
3GSIURGas Safety (Installation and Use) RegulationsSeparate GB 1998 and NI 2004 instruments govern in-scope gas work and use.
4DSEARDangerous Substances and Explosive Atmospheres RegulationsGB and NI regimes for preventing and controlling fire and explosion risks.
5PSSRPressure Systems Safety RegulationsMay require a written scheme and examination for systems within scope.
6Flue—Route carrying combustion products away from an appliance.
7Flashback—Flame travelling back through gas welding equipment.
Individual editable BuildOut documents

Table ID: gas-safety-buildout-documents

Source: https://www.sharehub.ltd/knowledge-hub/gas-safety.html

Row 1

Document

Gas-work authorisation and isolation procedureBOUK-PRO-GAS · Completed fictional example · v1.0

Purpose

Verify competent/registered specialists where required, isolate safely and obtain commissioning/handover evidence.

Editable download

Download DOCXRead preview

Row 2

Document

Gas specialist and work-scope authorisation checkBOUK-CHK-GAS-01 · Blank editable master · v1.0

Purpose

Verify qualifications/registration scope, method and client interfaces.

Editable download

Download DOCXRead preview

Row 3

Document

LPG, temporary heating and gas-cylinder assessmentBOUK-RA-GAS-01 · Blank editable master · v1.0

Purpose

Control leaks, ventilation, ignition, storage and emergency response.

Editable download

Download DOCXRead preview

Row 4

Document

Gas isolation, testing and handover evidence indexBOUK-FRM-GAS-01 · Blank editable master · v1.0

Purpose

Index competent isolation, testing, commissioning and handover evidence.

Editable download

Download DOCXRead preview

Row 5

Document

Gas appliance and cylinder condition checkBOUK-CHK-GAS-02 · Blank editable master · v1.0

Purpose

Verify safe siting, protection, hose/regulator condition and controls.

Editable download

Download DOCXRead preview

Read the complete comparison table
Individual editable BuildOut documents
RowDocumentPurposeEditable download
1Gas-work authorisation and isolation procedureBOUK-PRO-GAS · Completed fictional example · v1.0Verify competent/registered specialists where required, isolate safely and obtain commissioning/handover evidence.Download DOCXRead preview
2Gas specialist and work-scope authorisation checkBOUK-CHK-GAS-01 · Blank editable master · v1.0Verify qualifications/registration scope, method and client interfaces.Download DOCXRead preview
3LPG, temporary heating and gas-cylinder assessmentBOUK-RA-GAS-01 · Blank editable master · v1.0Control leaks, ventilation, ignition, storage and emergency response.Download DOCXRead preview
4Gas isolation, testing and handover evidence indexBOUK-FRM-GAS-01 · Blank editable master · v1.0Index competent isolation, testing, commissioning and handover evidence.Download DOCXRead preview
5Gas appliance and cylinder condition checkBOUK-CHK-GAS-02 · Blank editable master · v1.0Verify safe siting, protection, hose/regulator condition and controls.Download DOCXRead preview