Optional presentation practice. Choices and model launches do not write LMS grades, completion or certificates.
Recognise electrical injury, loss of power and electrostatic ignition as distinct but connected process scenarios.
An electrical event can harm through current passing through the body, an arc or hot surface, or the failure of equipment that a process depends on. In a plant handling flammable material, the same damaged connection may also provide ignition. These are related scenarios, but they do not have identical controls or evidence.
The gantry shows a dedicated bonding connection; the proposed loading task assumes the metal hose already provides all required electrostatic protection.
Temporary lighting, heaters, chargers and extension arrangements can introduce ignition, overloading, physical damage or loss of a needed service. Their short duration does not make their effects temporary in the risk assessment. The introduction of equipment also changes where cables, connections and people must be accommodated.
Bonding connects conductive objects to reduce potential differences between them. Earthing provides a connection from the conductive system to Earth. Their effectiveness depends on the complete specified path.
A worker finds a bonding clip gripping a painted carrying handle rather than the designated connection point.
Mechanical grip does not prove the electrical function, and an improvised arrangement does not establish the design basis.
Bonding connects conductive parts so that hazardous potential differences between them are controlled. Earthing provides a path by which charge on suitable conductive equipment can dissipate to earth. These functions relate to a complete system, including contact quality and continuity, rather than the visual presence of a clip.
Charge accumulation and discharge can ignite a suitable flammable atmosphere. Bonding, earthing, electrical shock protection and lightning protection have related but different purposes.
Hold loading until the task’s specified electrostatic controls and any associated permissive are correctly established and verified.
Inspection can identify damage, loose components and poor contact surfaces. Testing and maintenance may be needed to establish the performance of the specified system. These activities need competent people, suitable methods and a record that identifies what was checked; a photograph of a connected clip is not the same evidence.
An electrical incident can leave an ongoing hazard for people trying to help. The site plan must provide a means to raise the alarm, obtain competent assistance and prevent further exposure. A person collapsed near electrical equipment is not evidence that the energy source has become safe.
Return to the same fictional model case. Select the evidence needed before relying on the control.
Check the intended connection, monitor function and maintenance evidence through the approved safe verification method; a clipped lead or metal contact alone is not proof.
A power failure, steam-main rupture and refinery fire prompted a joint investigation. Its lessons included maintenance, contractor interfaces and management of change.
Apply the learning from Grangemouth, May to June 2000 to the current task.
Examine electrical fault protection, supply loss and common-service vulnerabilities.
Use the full course for detailed teaching, required activities and the separate final assessment. Presentation choices are practice and do not write LMS grades or completion.
The PowerPoint contains the presentation and notes. Enable JavaScript for the online choices and classification activity.