Process safety leadership and accountability

Approx. 90–125 minutes

Independent SHAREhub process-safety awareness. Selected learning maps to a numbered process-safety syllabus topic; this is not the NEBOSH qualification, approved provision, specialist design instruction or work authorisation. GB guidance is distinguished from corresponding NI requirements; establish applicability for the actual jurisdiction and establishment.

This reader supplies the complete teaching. Use the interactive LMS course for assessed activities, saved progress and completion.

LESSON 1

Commitment under pressure

Distinguish a policy from a practical leadership decision.

Process operators monitoring equipment from a UK industrial control room
Existing SHAREhub photographic illustration. The written fictional case supplies the condition and decision evidence.

Commitment under pressure

Leadership becomes visible when an awkward operating decision receives time, competence and resources. A signed policy states intent; it does not establish what happens when a delivery waits and a required protective function is unavailable.

Ask how the concern reaches a decision maker, who can restrict the operation and how the answer returns to the workforce. A walkround or meeting matters when it changes a real decision. Neither a confident promise nor an attractive dashboard replaces the evidence needed for the operation.

What is process safety leadership?

It is leadership that keeps attention on low-frequency, high-consequence hazards even when day-to-day performance looks good.

Best-practice guide · six simple steps

Best-practice guide: Process Safety Leadership and Visible Commitment

Start with the key actions, then explore value, a workplace example, harm, stronger controls and further help. Choose a step or use Previous and Next; the guide does not advance automatically.

Step 1 of 6 · Start
Download imagesThis cardPNG imagePDFView full sizeAll 6 cardsPNG images (ZIP)PDF (6 pages)

Keep one card or the full set for social sharing, team briefings and learning. Each PDF contains one card per page. Read the full topic for explanations, questions and source links.

Read all six steps as text
  1. 1. What is process safety leadership?

    The harm path from leadership is visible when an overdue proof test is accepted to protect the schedule, a trip cannot be relied on, and a foreseeable overfill or loss of containment exposes people to fire, blast or harmful release.

    • Avoid / redesign: Eliminate, Reduce including substitution, Isolate, Control, personal protective equipment (PPE) and Discipline (ERICPD) is a prompt for decisions.
    • Control the task: They are related frameworks, not identical laws; apply them to the actual task and check the resulting control.
    • Verify before release: Eliminate, Reduce including substitution, Isolate, Control, personal protective equipment (PPE) and Discipline (ERICPD) is a prompt for decisions.

    The harm path from leadership is visible when an overdue proof test is accepted to protect the schedule, a trip cannot be relied on, and a foreseeable overfill or loss of containment exposes people to fire, blast or harmful release. A leader does not operate the valve, but controls resources, priority and the restart threshold. Visible process-safety leadership is demonstrated when leaders make and fund decisions that preserve major-accident barriers, especially under pressure to produce.

    Apply it: Which part of this plan would you check at the workface before authorising the task?

    Read this part of the full topicOpen the full topicHSE leadership for the major hazard industries INDG277 (Great Britain)HSE essential principles of good leadership (Great Britain)HSE hierarchy of controls (Great Britain)
  2. 2. Turn process safety leadership and visible commitment knowledge into a decision

    Use the evidence to improve the actual work arrangement.

    • Change at source: Eliminate, Reduce including substitution, Isolate, Control, personal protective equipment (PPE) and Discipline (ERICPD) is a prompt for decisions.
    • Make it observable: Eliminate, Reduce including substitution, Isolate, Control, personal protective equipment (PPE) and Discipline (ERICPD) is a prompt for decisions.
    • Keep useful evidence: Barrier standard, impairment decision, funding/reprioritisation record, test result, operational handback and board review of recurrence.

    Visible process-safety leadership is demonstrated when leaders make and fund decisions that preserve major-accident barriers, especially under pressure to produce. A visit, slogan or low injury rate is not evidence that containment, relief, shutdown and emergency arrangements are healthy. Barrier standard, impairment decision, funding/reprioritisation record, test result, operational handback and board review of recurrence.

    Apply it: What evidence would show that the change improves this task, rather than only completing a record?

    Read this part of the full topicOpen the full topicHSE hierarchy of controls (Great Britain)HSE leadership for the major hazard industries INDG277 (Great Britain)HSE essential principles of good leadership (Great Britain)
  3. 3. Operational example: decisions and evidence

    Fictional example: a practical application of the existing topic lesson.

    • Setting: A terminal’s independent overfill trip has an overdue proof test during a high-volume delivery period.
    • Act: Confirm the overfill scenario, trip performance standard, last valid test, compensating measures and contractual schedule pressure.
    • Hold / review: No transfer under the normal envelope while independent protection remains unproved or a temporary measure lacks competent approval.

    Pause the affected transfer while the competent team verifies the trip and safe alternative; communicate the reason to crews and customers without blame. Restore and proof-test the barrier, close the impairment, update the delivery plan and examine why the test became overdue.

    Apply it: At which point would you hold this example, and what evidence would allow it to proceed?

    Read this part of the full topicOpen the full topicHSE leadership for the major hazard industries INDG277 (Great Britain)HSE essential principles of good leadership (Great Britain)
  4. 4. Where does process safety leadership fail?

    Connect the task, the route to the person and the control that can fail.

    • Source / exposure: Leadership fails when major accident risk is invisible, bad news is filtered or production pressure quietly outranks barriers.
    • Possible consequence: It appears when actions stay overdue, operators stop reporting nuisance alarms, shutdowns are delayed, maintenance is deferred, MOC quality drops, contractor concerns are ignored or leaders ask only about injury rates.
    • Control failure: Strong leadership uses those signals as prompts to look deeper, not as irritations to manage away.

    Leadership fails when major accident risk is invisible, bad news is filtered or production pressure quietly outranks barriers.

    Apply it: Who could be exposed, including other trades, cleaners, maintainers and people nearby?

    Read this part of the full topicOpen the full topicHSE leadership for the major hazard industries INDG277 (Great Britain)
  5. 5. Choose controls for process safety leadership and visible commitment

    Start with the stronger practicable options and verify their effect.

    • Change the work: Eliminate, Reduce including substitution, Isolate, Control, personal protective equipment (PPE) and Discipline (ERICPD) is a prompt for decisions.
    • Strengthen prevention: HSE’s five-level hierarchy prioritises elimination, substitution, engineering controls, administrative controls and PPE.
    • Verify the barriers: They are related frameworks, not identical laws; apply them to the actual task and check the resulting control.
    • Sustain the controls: Eliminate major-accident exposure where a design or business decision can remove a hazardous inventory or operation.
    • Review the decision: Leaders should test a proposal against the actual scenario, not treat behavioural reminders as an engineering alternative.

    Change the work: Eliminate, Reduce including substitution, Isolate, Control, personal protective equipment (PPE) and Discipline (ERICPD) is a prompt for decisions. Strengthen prevention: HSE’s five-level hierarchy prioritises elimination, substitution, engineering controls, administrative controls and PPE. Verify the barriers: They are related frameworks, not identical laws; apply them to the actual task and check the resulting control. Sustain the controls: Eliminate major-accident exposure where a design or business decision can remove a hazardous inventory or operation. Review the decision: Leaders should test a proposal against the actual scenario, not treat behavioural reminders as an engineering alternative. Read the full control table for qualifications, ownership and verification. Use the actual task and applicable jurisdiction; existing technical approval remains unchanged.

    Apply it: Which stronger option can be used here, and who will verify it before accepting the remaining risk?

    Read this part of the full topicOpen the full topicHSE hierarchy of controls (Great Britain)HSE leadership for the major hazard industries INDG277 (Great Britain)
  6. 6. Use the full process safety leadership and visible commitment lesson

    Follow the official sources below and retain the task-specific evidence.

    • Official guidance: HSE leadership for the major hazard industries INDG277
    • Official guidance: HSE essential principles of good leadership
    • Task decision: Barrier standard, impairment decision, funding/reprioritisation record, test result, operational handback and board review of recurrence.

    Use the full topic for the decision points, practical examples, detailed control tables and source scope. HSE guidance applies to Great Britain; use HSENI for the Northern Ireland route and the source’s stated jurisdiction. A simplified guide does not change the page’s technical-review or approval status.

    Apply it: Which official source and full-topic section will you use to resolve the next decision?

    Read this part of the full topicOpen the full topicHSE leadership for the major hazard industries INDG277 (Great Britain)HSE essential principles of good leadership (Great Britain)HSE hierarchy of controls (Great Britain)

Simplified learning guide. Use the full topic, current official guidance and the actual work arrangements. Workplace scenarios labelled fictional are illustrative examples.

Process safety leadership is tested when there is pressure: production delay, maintenance backlog, shutdown cost, contractor conflict, staffing shortage, overdue inspection, alarm problem or open MOC action. Visible commitment means leaders make decisions that protect barriers, not just speeches that say safety matters.

The strongest leaders do not rely on injury statistics to tell them whether a process plant is safe. They ask about loss-of-containment scenarios, safety-critical equipment, relief systems, alarm health, bypasses, start-up readiness, emergency drills and whether people feel able to report bad news.

Leadership behaviourWhat it meansEvidence
Scenario awarenessLeaders know credible major accident scenarios.Risk profile, bowties and safety report briefings.
Barrier focusQuestions target prevention, detection, control and mitigation barriers.Barrier dashboard and field verification.
Resource decisionsMaintenance, competence and engineering actions receive resources.Budget decisions and action close-out.
Bad-news responseWeak signals are welcomed and acted on.Near-miss and escalation records.
Visible field engagementLeaders ask useful questions at the plant, not generic tour questions.Leadership visit notes and actions.
AccountabilityOpen actions, impairments and risk acceptances have owners.Governance minutes and escalation.

A leader’s first test is whether they can name the high-consequence scenarios and the few controls whose failure could let them happen. The next test is what happens when one control is impaired: who knows, who can stop, who supplies resources, and who verifies return to service. Listening to a worker matters only if the signal changes a decision. The evidence is a trace from board priority to funded work, operational hold and field-verified closure.

Source: HSE leadership for the major hazard industries INDG277

Source: HSE essential principles of good leadership

The harm path from leadership is visible when an overdue proof test is accepted to protect the schedule, a trip cannot be relied on, and a foreseeable overfill or loss of containment exposes people to fire, blast or harmful release. A leader does not operate the valve, but controls resources, priority and the restart threshold. Stop the affected operation when a safety-critical barrier is unproved, and release it only with competent evidence that protection is restored. Source: HSE leadership for the major hazard industries INDG277

Applied case

Fictional exercise: A director praises the policy while the supervisor cannot obtain a safeguard decision.

Intent

A policy describes the promise.

Delivery

Resources and decisions show what happens under pressure.

Test your decision

What demonstrates commitment?

  1. Keep the concern off the dashboard.
  2. Resolve the operating question through the authorised route and resource its necessary action.
  3. Commission another policy poster.
Compare the explanation

Resolve the operating question through the authorised route and resource its necessary action.

Commitment must influence the actual unresolved condition.

Open this interactive lesson →

LESSON 2

Name the decision owner

Separate repair completion from operational acceptance.

Process operators monitoring equipment from a UK industrial control room
Existing SHAREhub photographic illustration. The written fictional case supplies the condition and decision evidence.

Name the decision owner

A responsibility should identify a role, a decision and its authority boundary. “Everyone owns safety” can encourage participation but cannot show who accepts equipment back into service. Maintenance may complete a repair while operations retains control of the process.

Map the interface explicitly. The repair owner supplies evidence of the specified work and remaining limitations. The authorised operating role examines the required return-to-service conditions. Do not assume one signature automatically covers both decisions, or that a department name establishes who acts during absence.

What do process safety responsibilities and accountability involve?

They define who must do what, who can decide, who verifies and who remains accountable when risk is delegated.

Best-practice guide · six simple steps

Best-practice guide: Process Safety Responsibilities and Accountability

Start with the key actions, then explore value, a workplace example, harm, stronger controls and further help. Choose a step or use Previous and Next; the guide does not advance automatically.

Step 1 of 6 · Start
Download imagesThis cardPNG imagePDFView full sizeAll 6 cardsPNG images (ZIP)PDF (6 pages)

Keep one card or the full set for social sharing, team briefings and learning. Each PDF contains one card per page. Read the full topic for explanations, questions and source links.

Read all six steps as text
  1. 1. What do process safety responsibilities and accountability involve?

    A bypass without a named decision owner creates a harm path: delivery proceeds with an emergency shutdown function unavailable, a transfer upset is not stopped, and a release can expose people to fire, blast or harmful material.

    • Avoid / redesign: Eliminate, Reduce including substitution, Isolate, Control, personal protective equipment (PPE) and Discipline (ERICPD) is a prompt for decisions.
    • Control the task: They are related frameworks, not identical laws; apply them to the actual task and check the resulting control.
    • Verify before release: Eliminate, Reduce including substitution, Isolate, Control, personal protective equipment (PPE) and Discipline (ERICPD) is a prompt for decisions.

    A bypass without a named decision owner creates a harm path: delivery proceeds with an emergency shutdown function unavailable, a transfer upset is not stopped, and a release can expose people to fire, blast or harmful material. The line operator should not silently accept that risk; the authorised owner must hold the transfer until protection is proved. Process-safety accountability means a named person has authority, competence and resources for each major-accident barrier and for decisions when it is impaired.

    Apply it: Which part of this plan would you check at the workface before authorising the task?

    Read this part of the full topicOpen the full topicHSE COMAH 2015 guidance (Great Britain)HSE leadership for the major hazard industries INDG277 (Great Britain)HSE hierarchy of controls (Great Britain)
  2. 2. Turn process safety responsibilities and accountability knowledge into a decision

    Use the evidence to improve the actual work arrangement.

    • Change at source: Eliminate, Reduce including substitution, Isolate, Control, personal protective equipment (PPE) and Discipline (ERICPD) is a prompt for decisions.
    • Make it observable: Eliminate, Reduce including substitution, Isolate, Control, personal protective equipment (PPE) and Discipline (ERICPD) is a prompt for decisions.
    • Keep useful evidence: Bypass permit, cause-and-effect/test record, control-room log, decision rights, communications and verified handback.

    Process-safety accountability means a named person has authority, competence and resources for each major-accident barrier and for decisions when it is impaired. A RACI chart alone cannot make a transfer safe: the operator must know whom to call, the supervisor must control the task, the technical authority must judge the barrier, and the release owner must record why work can resume. Bypass permit, cause-and-effect/test record, control-room log, decision rights, communications and verified handback.

    Apply it: What evidence would show that the change improves this task, rather than only completing a record?

    Read this part of the full topicOpen the full topicHSE hierarchy of controls (Great Britain)HSE COMAH 2015 guidance (Great Britain)HSE leadership for the major hazard industries INDG277 (Great Britain)
  3. 3. Operational example: decisions and evidence

    Fictional example: a practical application of the existing topic lesson.

    • Setting: the process operator bypasses the independent emergency shutdown trip on a fuel-loading line for a planned proof test as a tanker arrives early.
    • Act: Define bypass permit, duration, isolation, compensating measures, communication, test acceptance and who can reject a transfer.
    • Hold / review: Do not let schedule pressure transfer the acceptance decision to an operator without authority or evidence; stop until the trip is restored or a competent approved alternative exists.

    Keep the line out of normal transfer while the trip is bypassed; record status at the control room and tanker interface. Test and restore the trip, remove the bypass, reconcile logs and obtain the named release owner’s sign-off.

    Apply it: At which point would you hold this example, and what evidence would allow it to proceed?

    Read this part of the full topicOpen the full topicHSE COMAH 2015 guidance (Great Britain)HSE leadership for the major hazard industries INDG277 (Great Britain)
  4. 4. Where do responsibilities and accountability commonly fail?

    Connect the task, the route to the person and the control that can fail.

    • Source / exposure: Failures arise where roles are vague, technical authority is bypassed or interfaces are not owned.
    • Possible consequence: The phrase 'everyone is responsible' can hide the fact that no one owns the difficult decisions.
    • Control failure: Process safety needs clarity because barrier impairment, MOC, restart, risk acceptance and emergency response can involve high-consequence judgement.

    Failures arise where roles are vague, technical authority is bypassed or interfaces are not owned.

    Apply it: Who could be exposed, including other trades, cleaners, maintainers and people nearby?

    Read this part of the full topicOpen the full topicHSE COMAH 2015 guidance (Great Britain)
  5. 5. Choose controls for process safety responsibilities and accountability

    Start with the stronger practicable options and verify their effect.

    • Change the work: Eliminate, Reduce including substitution, Isolate, Control, personal protective equipment (PPE) and Discipline (ERICPD) is a prompt for decisions.
    • Strengthen prevention: HSE’s five-level hierarchy prioritises elimination, substitution, engineering controls, administrative controls and PPE.
    • Verify the barriers: They are related frameworks, not identical laws; apply them to the actual task and check the resulting control.
    • Sustain the controls: Eliminate a hazardous transfer or inventory where a design change makes the barrier unnecessary; the process owner and technical authority must approve the changed hazard basis.
    • Review the decision: Substitute or reduce the hazardous substance, inventory or transfer rate where feasible.

    Change the work: Eliminate, Reduce including substitution, Isolate, Control, personal protective equipment (PPE) and Discipline (ERICPD) is a prompt for decisions. Strengthen prevention: HSE’s five-level hierarchy prioritises elimination, substitution, engineering controls, administrative controls and PPE. Verify the barriers: They are related frameworks, not identical laws; apply them to the actual task and check the resulting control. Sustain the controls: Eliminate a hazardous transfer or inventory where a design change makes the barrier unnecessary; the process owner and technical authority must approve the changed hazard basis. Review the decision: Substitute or reduce the hazardous substance, inventory or transfer rate where feasible. Read the full control table for qualifications, ownership and verification. Use the actual task and applicable jurisdiction; existing technical approval remains unchanged.

    Apply it: Which stronger option can be used here, and who will verify it before accepting the remaining risk?

    Read this part of the full topicOpen the full topicHSE hierarchy of controls (Great Britain)HSE COMAH 2015 guidance (Great Britain)
  6. 6. Use the full process safety responsibilities and accountability lesson

    Follow the official sources below and retain the task-specific evidence.

    • Official guidance: HSE COMAH 2015 guidance
    • Official guidance: HSE leadership for the major hazard industries INDG277
    • Task decision: Bypass permit, cause-and-effect/test record, control-room log, decision rights, communications and verified handback.

    Use the full topic for the decision points, practical examples, detailed control tables and source scope. HSE guidance applies to Great Britain; use HSENI for the Northern Ireland route and the source’s stated jurisdiction. A simplified guide does not change the page’s technical-review or approval status.

    Apply it: Which official source and full-topic section will you use to resolve the next decision?

    Read this part of the full topicOpen the full topicHSE COMAH 2015 guidance (Great Britain)HSE leadership for the major hazard industries INDG277 (Great Britain)HSE hierarchy of controls (Great Britain)

Simplified learning guide. Use the full topic, current official guidance and the actual work arrangements. Workplace scenarios labelled fictional are illustrative examples.

Process safety accountability is not the same as saying everyone is responsible for safety. Everyone has a role, but major accident hazards need clear ownership. Someone must own the risk, someone must own the barrier, someone must own the procedure, someone must approve deviations, and someone must verify that actions reduce risk.

Accountability becomes most important at interfaces: operations and maintenance, projects and live plant, contractor and client, engineering and production, board and site, shift handover and emergency response. Many serious failures occur where people assumed someone else owned the control.

Accountability elementWhat it meansEvidence
Risk ownerPerson accountable for a major accident scenario or asset risk.Risk register and governance record.
Barrier ownerPerson accountable for a safety-critical control remaining effective.Barrier register and performance standard.
Technical authorityCompetent person or function that approves technical standards and deviations.Technical authority framework.
Decision rightsDefined authority to approve change, impairment, restart or risk acceptance.Delegation and approval matrix.
Task responsibilityWho plans, briefs, executes, checks and hands back work.Procedure, permit and handover records.
Assurance ownerWho verifies controls and action effectiveness.Monitoring/audit programme.

Map the scenario and safeguards before assigning titles. A high-high trip has a design authority, test owner, impairment decision owner, operator who sees the bypass, supervisor who stops transfer, and a manager who funds repair. Identify who can authorise temporary operation and under what evidence. Contractors and handovers must be included. Accountability is demonstrated by a traceable decision and field closure, not a generic organisational chart.

Source: HSE COMAH 2015 guidance

Source: HSE leadership for the major hazard industries INDG277

A bypass without a named decision owner creates a harm path: delivery proceeds with an emergency shutdown function unavailable, a transfer upset is not stopped, and a release can expose people to fire, blast or harmful material. The line operator should not silently accept that risk; the authorised owner must hold the transfer until protection is proved. Source: HSE COMAH 2015 guidance

Applied case

Fictional exercise: A signed repair note names no return-to-service decision owner.

Repair

Specified work and its limitations must be demonstrated.

Acceptance

The operating basis requires its own responsible decision.

Test your decision

What is missing?

  1. An explicit authorised operational acceptance and its required evidence.
  2. A duplicate repair note.
  3. Equal approval authority for every employee.
Compare the explanation

An explicit authorised operational acceptance and its required evidence.

Repair evidence and operational acceptance have different purposes.

Open this interactive lesson →

LESSON 3

Handle a production conflict

Preserve the decision boundary during commercial pressure.

Process operators monitoring equipment from a UK industrial control room. Photorealistic illustration.
Photorealistic illustrative UK workplace scene. Review checks: Avoid / redesign: Eliminate, Reduce including substitution, Isolate, Control, personal protective equipment (PPE) and Discipline (ERICPD) is a prompt for decisions. Control the task: They are related frameworks, not identical laws; apply them to the actual task and check the resulting control. Verify before release: Eliminate, Reduce including substitution, Isolate, Control, personal protective equipment (PPE) and Discipline (ERICPD) is a prompt for decisions.

Handle a production conflict

A deadline tests whether stated restrictions survive ordinary business pressure. Make the conflict visible rather than asking a less senior person to absorb an undefined risk. Commercial impact is relevant context, but it does not establish the safety basis.

A temporary arrangement needs the site’s authorised process, competent review and communicated conditions. Calling a workaround temporary does not approve it. An awareness learner can identify the missing arrangement and escalate it; they cannot invent permission because waiting is inconvenient.

Separate repair, acceptance and operating authority

A leader makes the restriction, resources and decision owner clear. Funding a repair is different from accepting the plant for operation.

Fictional learning example

Separate the evidence from the decision
Part of the pictureWhat the example establishes
MaintenanceThe repair has been completed and its work record signed.
OperationsThe shift has not received the function-test result or updated restriction.
LeadershipProduction is requesting immediate return to service.

Pause and decide: Which missing decision prevents an evidence-based operating handover?

Compare the reasoning

The authorised operating decision still needs the applicable acceptance evidence and a shared understanding of conditions. The leader should maintain the agreed restriction, resolve ownership and obtain competent advice. Maintenance completion alone does not transfer operating authority.

How does leadership change a barrier decision?

A worked example shows leadership under production pressure, where visible commitment means choosing barrier health over convenience.

Crownway Fuels Ltd has an overdue proof test on an independent high-high level trip for a fuel storage tank. The site is under delivery pressure and a shutdown window has already moved twice. The dashboard still shows low personal injury numbers, so a weak leadership response would be to defer the test again and accept verbal reassurance that operators will monitor levels closely.

A strong process safety leader asks what scenario the trip protects, what other barriers are available, whether manual monitoring is independent and reliable, who is authorised to accept temporary risk, what customers or production plans need adjusting, and when the proof test will be completed. The decision is visible because it changes priorities, not because the leader gave a talk.

Decision pointWeak leadership responseStrong leadership response
Overdue proof testDefer because operations are busy.Ask what major accident barrier is degraded and escalate.
Production pressureTreat delivery schedule as fixed.Review production plan against barrier impairment.
Temporary controlsRely on operator vigilance.Define independent temporary controls and risk acceptance.
Risk ownershipLet local team carry informal risk.Named senior owner approves or stops operation.
Action close-outAccept email saying test will be done.Verify proof test result and update dashboard.
LearningTreat as one overdue task.Review backlog, planning and resource causes.

Operational example: decisions and evidence

Task material and setting: A terminal’s independent overfill trip has an overdue proof test during a high-volume delivery period.

People and prerequisites: Shift lead owns transfer; instrument specialist tests the trip; process-safety lead judges barrier impairment; executive sponsor controls resources and release authority.

Before: Confirm the overfill scenario, trip performance standard, last valid test, compensating measures and contractual schedule pressure.

During: Pause the affected transfer while the competent team verifies the trip and safe alternative; communicate the reason to crews and customers without blame.

Hold or stop: No transfer under the normal envelope while independent protection remains unproved or a temporary measure lacks competent approval.

Completion and hand back: Restore and proof-test the barrier, close the impairment, update the delivery plan and examine why the test became overdue.

Evidence: Barrier standard, impairment decision, funding/reprioritisation record, test result, operational handback and board review of recurrence.

Source: HSE leadership for the major hazard industries INDG277

Source: HSE essential principles of good leadership

Three different decisions: the executive sponsor approves resources and escalation; the competent technical authority accepts test/repair or a tested engineered equivalent; operations controls handback and restart. No sponsor may overrule unresolved performance-standard failure or a statutory restriction by signing risk acceptance. Illustrative record: independent overfill trip, affected tank-transfer scenario, hazardous transfer held, repair/proof-test reference required, next-shift/expiry review and immediate stop on changed conditions. Crownway is a fictional teaching case, not a documented HSE incident.

Applied case

Fictional exercise: A dispatch deadline approaches; no approved alternative to the unavailable safeguard is supplied.

Pressure

The deadline explains the conflict.

Temporary

Duration is not evidence of approval or adequacy.

Test your decision

What should the manager do?

  1. Call the workaround temporary and continue.
  2. Leave the decision to an unbriefed operator.
  3. Maintain the applicable restriction and seek the authorised decision.
Compare the explanation

Maintain the applicable restriction and seek the authorised decision.

Urgency does not establish an acceptable operating basis.

Open this interactive lesson →

LESSON 4

Make interfaces work

Trace critical information to the decision it affects.

Process operators monitoring equipment from a UK industrial control room. Photorealistic illustration.
Photorealistic illustrative UK workplace scene. Review checks: Avoid / redesign: Eliminate, Reduce including substitution, Isolate, Control, personal protective equipment (PPE) and Discipline (ERICPD) is a prompt for decisions. Control the task: They are related frameworks, not identical laws; apply them to the actual task and check the resulting control. Verify before release: Eliminate, Reduce including substitution, Isolate, Control, personal protective equipment (PPE) and Discipline (ERICPD) is a prompt for decisions.

Make interfaces work

A laboratory result, maintenance limitation or contractor discovery must reach the role able to act before the affected operation. Sending an email to a department is not proof of receipt or action.

Identify the sender, recipient, required content and confirmation. State who controls the operation while the answer is pending. Test the route during shift change and absence, when informal personal contacts may fail. An effective interface connects information with a decision, rather than simply moving a document between folders.

How should accountability flow through the organisation?

Accountability should flow down through clear roles and back up through evidence, escalation and review.

A useful model is: board accountability -> site/asset ownership -> technical authority standards -> line management control -> supervisor verification -> worker/contractor task responsibility -> assurance feedback -> management review. This is not bureaucracy; it prevents safety-critical decisions disappearing into gaps.

The board cannot personally check every valve, but it remains accountable for ensuring competent arrangements exist. A worker can stop a job, but they should not carry the burden of deciding whether a degraded major accident barrier is acceptable for continued operation.

LevelAccountability focusEvidence flow back up
Board/senior leadershipSet risk appetite, resources and assurance expectations.Barrier dashboard, red actions and audit findings.
Site/asset managerOwn local major accident risk and operating discipline.Risk reviews and escalation logs.
Technical authoritySet standards and approve deviations or complex changes.Technical approvals and deviation register.
Operations/maintenance managerControl routine work, maintenance, permits and competence.KPIs, backlog and verification records.
SupervisorBrief, coordinate and verify work as done.Shift records, checks and stop-work actions.
Worker/contractorFollow controls, report weak signals and stop unsafe work.Task records, observations and near-miss reports.
Assurance/auditTest whether the system works in reality.Findings, grading and verified actions.

Applied case

Fictional exercise: A feed-identity concern arrives after a planner releases the batch paperwork.

Sent

Transmission is one step.

Acted on

The relevant decision and feedback complete the connection.

Test your decision

Which interface matters?

  1. Which department has most staff.
  2. Receipt and action by the role controlling the affected operation.
  3. Only the laboratory filing convention.
Compare the explanation

Receipt and action by the role controlling the affected operation.

Information must reach the operating decision in time to matter.

Open this interactive lesson →

LESSON 5

Ask useful walkround questions

Examine a specific control without overgeneralising.

Process operators monitoring equipment from a UK industrial control room. Photorealistic illustration.
Photorealistic illustrative UK workplace scene. Review checks: Change at source: Eliminate, Reduce including substitution, Isolate, Control, personal protective equipment (PPE) and Discipline (ERICPD) is a prompt for decisions. Make it observable: Eliminate, Reduce including substitution, Isolate, Control, personal protective equipment (PPE) and Discipline (ERICPD) is a prompt for decisions. Keep useful evidence: Barrier standard, impairment decision, funding/reprioritisation record, test result, operational handback and board review of recurrence.

Ask useful walkround questions

Ask the operator to explain a real control: how this route is identified or what happens if that safeguard is unavailable. Respect restricted areas and avoid interrupting a critical task. Questions should support understanding, not become an impromptu test conducted at an unsafe moment.

Compare the explanation with a relevant record or observed arrangement. A confident answer starts the examination; it does not finish it. Record the scope of what was demonstrated and state any remaining uncertainty separately. One good example cannot prove every process on the site.

What should leaders ask in management review?

Leadership assurance should test the health of barriers, weak signals and decisions rather than count activity alone.

A useful review meeting starts with the major accident scenarios. Leaders should ask which barriers are degraded, what has changed, what has been deferred, what weak signals are repeating and whether actions are effective. This creates a direct line from hazard to control to evidence.

The review should also test whether the leadership system itself is working: are decisions timely, are resources adequate, are technical authorities listened to, and does the workforce trust the escalation process?

QuestionWhy it mattersEvidence requested
What are our top major accident scenarios?Keeps high-consequence risk visible.Risk profile and bowties.
Which safety-critical barriers are degraded?Shows live control weakness.Barrier dashboard and impairment log.
What actions are overdue and why?Tests accountability and resources.Action tracker and owner review.
What weak signals are increasing?Finds drift before events.Near-miss, alarm, leak and defect trends.
Where has production pressure challenged safety?Reveals goal conflict.Risk acceptances and stop-work examples.
How do we know learning changed the field?Avoids paper-only improvement.Verification records and worker interviews.

Applied case

Fictional exercise: An operator shows the current route and restriction; no equipment defect is observed.

Observation

Record what was actually shown.

Scope

A local example does not establish universal performance.

Test your decision

What is justified?

  1. A finding about that demonstrated arrangement, with remaining questions separate.
  2. A defect because the form looks unfamiliar.
  3. Proof that all site safeguards are reliable.
Compare the explanation

A finding about that demonstrated arrangement, with remaining questions separate.

A sample has a defined scope.

Open this interactive lesson →

LESSON 6

Support assigned responsibility

Identify an allocation that lacks capability.

Process operators monitoring equipment from a UK industrial control room. Photorealistic illustration.
Photorealistic illustrative UK workplace scene. Review checks: Change at source: Eliminate, Reduce including substitution, Isolate, Control, personal protective equipment (PPE) and Discipline (ERICPD) is a prompt for decisions. Make it observable: Eliminate, Reduce including substitution, Isolate, Control, personal protective equipment (PPE) and Discipline (ERICPD) is a prompt for decisions. Keep useful evidence: Bypass permit, cause-and-effect/test record, control-room log, decision rights, communications and verified handback.

Support assigned responsibility

Naming a role is insufficient if it lacks information, time, competence or access to specialist advice. Responsibilities become workable when the organisation provides support and defines escalation beyond the role’s limits.

Test a concrete decision rather than admiring the organisation chart. Can the shift obtain advice outside normal hours? Does the supervisor know which changes require approval? Individual willingness cannot replace organisational arrangements. Equally, the presence of resources does not itself prove that a person is competent for a specialist decision.

What evidence proves accountability is clear?

Evidence should show roles, competence, authority, escalation and action ownership in routine and abnormal conditions.

A good accountability system can be sampled. Pick one major accident scenario and ask who owns the risk, who owns each barrier, who maintains it, who verifies it, who approves impairment, who receives red indicators and who can stop operation. If those answers are unclear, the accountability system is weak.

The evidence should include formal documents and live records. Role descriptions are useful, but permit records, MOC decisions, bypass approvals, shift handovers and action trackers show whether accountability works in practice.

Evidence itemWhat good looks likeWeakness to challenge
Organisation chartRoles reflect actual control of plant, people and decisions.Chart does not match how work is done.
RACI matrixResponsible, accountable, consulted and informed roles defined for critical processes.Matrix exists but misses abnormal work.
Technical authority frameworkCompetence and decision rights are clear.Technical decisions made by pressure or seniority.
Delegation of authorityRisk acceptance, MOC, bypass and restart approvals are defined.Informal approvals for high-risk deviations.
Competence recordsRole holders trained and authorised for responsibility.Named owners lack competence or time.
Action trackerActions have owners with authority and evidence of closure.Actions assigned to generic departments.
Handover recordsBarrier impairments and abnormal conditions are transferred.Handover misses safety-critical status.

Applied case

Fictional exercise: A supervisor must approve process changes but has no defined competence standard or review support.

Named

A chart establishes allocation.

Supported

Information, competence and escalation make it workable.

Test your decision

What needs attention?

  1. Only the job title.
  2. A request for a more confident signature.
  3. The authority, competence and support for that decision.
Compare the explanation

The authority, competence and support for that decision.

Allocated responsibility needs a practical and competent basis.

Open this interactive lesson →

LESSON 7

Keep bad news usable

Recognise how leadership behaviour affects evidence.

Process operators monitoring equipment from a UK industrial control room. Photorealistic illustration.
Photorealistic illustrative UK workplace scene. Review checks: Setting: A terminal’s independent overfill trip has an overdue proof test during a high-volume delivery period. Act: Confirm the overfill scenario, trip performance standard, last valid test, compensating measures and contractual schedule pressure. Hold / review: No transfer under the normal envelope while independent protection remains unproved or a temporary measure lacks competent approval.

Keep bad news usable

Public criticism can discourage useful reports without improving plant conditions. Invite factual concerns, explain the response route and show what follows. A concern may be important even when its cause remains uncertain.

Fairness is not a promise that every behaviour is acceptable. A consistent accountability process considers context, while the investigation examines equipment, workload, supervision and instructions. Protecting people and understanding the event should not be displaced by an immediate search for someone to blame. Leaders need reliable information, including information they would rather not hear.

Where does process safety leadership fail?

Leadership fails when major accident risk is invisible, bad news is filtered or production pressure quietly outranks barriers.

Weak leadership rarely announces itself. It appears when actions stay overdue, operators stop reporting nuisance alarms, shutdowns are delayed, maintenance is deferred, MOC quality drops, contractor concerns are ignored or leaders ask only about injury rates. These are cultural and governance signals.

Strong leadership uses those signals as prompts to look deeper, not as irritations to manage away.

Failure modeHow it developsWhat competent management does
Injury-rate fixationLeaders equate low lost-time injury rate with process safety health.Review process safety indicators and high-potential events.
Field visits are superficialTours focus on PPE and housekeeping only.Use scenario and barrier-focused questions.
Bad news filteredManagers sanitise weak signals before board review.Create direct worker voice and independent assurance.
Deferred maintenance normalisedBacklog grows under production pressure.Risk-rank, resource and escalate safety-critical backlog.
Action closure weakActions closed administratively.Require evidence and effectiveness checks.
Contractors excludedLeadership ignores contractor interface risk.Include contractor work in assurance and engagement.
Risk acceptance informalTemporary operation continues without authority.Define decision rights and time-bound controls.

Applied case

Fictional exercise: Reports fall after the last uncertain concern is publicly mocked.

Uncertain

A report can be useful before its cause is known.

Fair

Contextual accountability supports learning without blanket immunity.

Test your decision

What should the leader examine?

  1. How to discourage uncertain reports further.
  2. Reporting willingness and the response to concerns alongside operating data.
  3. Whether the fall automatically proves improvement.
Compare the explanation

Reporting willingness and the response to concerns alongside operating data.

Leadership response can change what information reaches the organisation.

Open this interactive lesson →

LESSON 8

Arrange competent cover

Distinguish access from delegated authority.

Process operators monitoring equipment from a UK industrial control room. Photorealistic illustration.
Photorealistic illustrative UK workplace scene. Review checks: Setting: the process operator bypasses the independent emergency shutdown trip on a fuel-loading line for a planned proof test as a tanker arrives early. Act: Define bypass permit, duration, isolation, compensating measures, communication, test acceptance and who can reject a transfer. Hold / review: Do not let schedule pressure transfer the acceptance decision to an operator without authority or evidence; stop until the trip is restored or a competent approved alternative exists.

Arrange competent cover

Cover requires outstanding restrictions, decision limits and routes to advice, not merely a forwarded inbox. Otherwise an absence can leave a critical condition effectively ownerless.

The covering role needs appropriate competence and explicit delegated authority. Reading a drawing is different from approving a changed operating basis. Separate requests awaiting approval from arrangements already accepted. Confirm that the next shift knows who holds each decision and how to escalate if that person cannot be reached.

How does accountability apply to a bypassed safety-critical trip?

A worked example shows why decision rights matter when a safety-critical barrier is impaired.

Crownway Fuels Ltd needs to test an emergency shutdown trip on a loading system. The trip is bypassed temporarily for testing. A tanker delivery arrives early, and the shift team considers continuing the transfer because the trip will only be bypassed for a short time. This is where accountability must be explicit.

The operator may know the bypass exists, but the operator should not be left to accept the risk informally. The supervisor must control the task, the operations manager must decide whether transfer can proceed, the technical authority may need to approve temporary controls, and senior leadership must define which bypasses require stop or escalation.

RoleRACI positionAccountability and evidence expected
OperatorResponsibleIdentify the bypass status, follow the authorised procedure, stop if conditions are outside the permit and record the field condition.
Supervisor / permit authorityAccountable for task controlConfirm the bypass is tagged, briefed, time-limited and reflected in the permit, shift handover and temporary-control plan.
Technical authorityConsulted / approval where requiredConfirm whether the trip is safety-critical, what risk is created, which temporary controls are credible and whether operation can continue.
Maintenance / instrument technicianResponsible for test and reinstatementApply/remove the bypass under control, complete functional proof test, record results and confirm the barrier is restored.
Asset owner / operations managerAccountable for operational risk acceptanceDecide whether transfer, start-up or continued operation is allowed and document authority, expiry and restrictions.
Site leaderInformed / escalated for high-risk deviationReview repeated bypasses, overdue reinstatement, production pressure and resource causes in management review.
Process safety / assurance leadConsulted / verifiesSample the bypass record, temporary controls, proof-test evidence and learning actions for effectiveness.

Operational example: decisions and evidence

Task material and setting: Crownway Fuels Ltd bypasses the independent emergency shutdown trip on a fuel-loading line for a planned proof test as a tanker arrives early.

People and prerequisites: Instrument specialist controls the test; operator knows bypass status; supervisor controls the transfer; technical authority judges temporary protection; operations manager owns stop/release.

Before: Define bypass permit, duration, isolation, compensating measures, communication, test acceptance and who can reject a transfer.

During: Keep the line out of normal transfer while the trip is bypassed; record status at the control room and tanker interface.

Hold or stop: Do not let schedule pressure transfer the acceptance decision to an operator without authority or evidence; stop until the trip is restored or a competent approved alternative exists.

Completion and hand back: Test and restore the trip, remove the bypass, reconcile logs and obtain the named release owner’s sign-off.

Evidence: Bypass permit, cause-and-effect/test record, control-room log, decision rights, communications and verified handback.

Source: HSE COMAH 2015 guidance

Source: HSE leadership for the major hazard industries INDG277

Out-of-hours branch: use the authorised deputy if the operations manager is unavailable. If a contractor disputes the bypass register or shift handover conflicts, hold the transfer, reconcile actual plant status against the evidence with the technical authority and tell the tanker/interface supervisor. Record the agreed boundary, verification reference, decision functions and final operations handback before release. Neither a senior signature nor production pressure resolves an unknown barrier state; operator duties remain.

Applied case

Fictional exercise: A deputy can access drawings but has no defined change-approval role.

Access

The deputy can obtain information.

Authority

Approval needs a defined role and competence.

Test your decision

What should happen?

  1. Establish competent authorised cover and retain applicable restrictions meanwhile.
  2. Treat drawing access as approval authority.
  3. Remove the outstanding request from handover.
Compare the explanation

Establish competent authorised cover and retain applicable restrictions meanwhile.

Access, competence and authority are distinct.

Open this interactive lesson →

LESSON 9

Challenge a favourable metric

Connect indicators to underlying control conditions.

2D teaching diagram: Change the evidence before restarting
Existing SHAREhub 2D teaching schematic. Use alongside the explanation and fictional case in this lesson.

Challenge a favourable metric

A useful measure answers a specific control question. Examine its definition, coverage and data quality before interpreting a favourable trend. A total may hide the one unresolved weakness that matters for a major-event scenario.

Targets should not reward suppression or premature closure. If unresolved repairs are renamed to reach zero overdue actions, the number changes without restoring a protective function. Ask what changed physically or organisationally, what evidence supports it and which conditions remain. Leaders should learn from the measure rather than make the work conform to its colour.

What is visible commitment and what is leadership theatre?

Visible commitment is proven by useful questions, difficult decisions, resources and verified improvement; theatre looks active but does not strengthen barriers.

A leader walking the site and asking 'is everyone being safe?' may mean well, but the question is too broad. In process safety, stronger questions are: which safety-critical controls are impaired today, which alarms are standing, what MOC actions are overdue, what maintenance has been deferred, what weak signals are repeating, and what would stop this job?

Visible commitment also includes what leaders do after the visit. If workers raise a concern and nothing changes, visibility becomes theatre. If leaders close the loop, allocate resources and remove blockers, trust and control improve.

Leadership activityVisible commitmentLeadership theatre
Site visit preparationReview top major accident scenarios, overdue MOC actions, impaired barriers, weak signals and previous commitments before visiting.Arrive with a generic checklist and treat the visit mainly as visibility.
Questions askedAsk about relief valves, bypasses, alarm health, safe limits, proof tests, permit conflicts and what would stop the job.Ask mainly whether everyone is wearing PPE and whether there have been any injuries.
Worker voiceLet operators, technicians and contractors explain work as done, including awkward truths and informal workarounds.Hear only filtered messages from the management chain.
Resource decisionsRelease budget, people, engineering support or shutdown time when barrier health needs it.Praise the team for low injury rates while deferring safety-critical maintenance.
MOC and temporary riskChallenge overdue MOC actions, temporary repairs and risk acceptances until authority, expiry and controls are clear.Accept broad reassurance that the site has it under control.
Weak signalsTreat small leaks, nuisance alarms, repeated defects and near misses as possible process safety information.Treat weak signals as noise unless actual harm has occurred.
VerificationReturn to check whether field conditions changed and whether actions are effective.Close actions from a meeting update without checking the plant.
LearningUse themes to update governance, objectives, competence and assurance.Treat each issue as isolated and move on.

Applied case

Fictional exercise: Unresolved repairs are relabelled observations before the monthly review.

Number

Definitions shape the displayed result.

Condition

Renaming does not repair the safeguard.

Test your decision

What is the concern?

  1. The risk disappears with the new label.
  2. The target proves all work is complete.
  3. The measure conceals unresolved control work.
Compare the explanation

The measure conceals unresolved control work.

Classification changes do not demonstrate restored control.

Open this interactive lesson →

LESSON 10

Check effectiveness

Distinguish implementation from a successful outcome.

2D teaching diagram: Show how the barriers prevent major harm
Existing SHAREhub 2D teaching schematic. Use alongside the explanation and fictional case in this lesson.

Check effectiveness

An action marked complete should have evidence of the agreed change. Effectiveness asks a further question: did that change address the original weakness in use? A revised form may exist while people still select the wrong route.

Specify observable evidence appropriate to the action. The reviewer should understand the control and the limits of the sample. Do not claim workforce capability from a document revision alone, or treat repetition of the owner’s statement as independent verification. Closure should preserve any remaining restriction or uncertainty.

How should accountability be audited?

Audit accountability by following a real scenario, barrier or action across organisational levels.

Do not audit accountability only by reading role descriptions. Select a live or recent issue: an overdue proof test, open MOC, bypassed alarm, deferred maintenance item, contractor interface or abnormal start-up. Follow it through the organisation and ask who knew, who decided, who owned the risk and who verified the action.

A strong audit will show whether accountability flows both ways: expectations flow down to work, and evidence flows back to leaders.

Audit sampleQuestionEvidence
Overdue critical maintenanceWho owns the risk and approves deferral?Backlog, risk ranking and approval.
MOC actionWho can close it and what evidence is needed?MOC close-out record.
Bypassed alarm/tripWho authorised the bypass and temporary controls?Bypass register and permit.
Contractor high-risk taskWhere do client and contractor responsibilities meet?Bridge document and permit.
Incident actionDoes the owner have authority to change the system?Action tracker and verification.
Board reviewDo leaders see unresolved accountability gaps?Minutes and escalation.

Applied case

Fictional exercise: A routing action closes when a new form is uploaded; no use has been examined.

Implemented

The agreed change exists.

Effective

It addresses the original weakness in use.

Test your decision

What remains?

  1. Whether the owner likes the status colour.
  2. Whether the revised arrangement supports correct routing in the task.
  3. Whether the filename is short.
Compare the explanation

Whether the revised arrangement supports correct routing in the task.

Document completion and practical effectiveness are separate questions.

Open this interactive lesson →

LESSON 11

Establish governance scope

Avoid applying one legal regime universally.

Process operators monitoring equipment from a UK industrial control room. Photorealistic illustration.
Photorealistic illustrative UK workplace scene. Review checks: Avoid / redesign: Eliminate, Reduce including substitution, Isolate, Control, personal protective equipment (PPE) and Discipline (ERICPD) is a prompt for decisions. Control the task: They are related frameworks, not identical laws; apply them to the actual task and check the resulting control. Verify before release: Eliminate, Reduce including substitution, Isolate, Control, personal protective equipment (PPE) and Discipline (ERICPD) is a prompt for decisions.

Establish governance scope

Process-safety leadership matters beyond establishments covered by a particular major-hazard regime. Whether COMAH applies depends on the establishment, relevant substances and the applicable jurisdiction; a training example cannot determine its status.

Ask the responsible technical and legal roles to establish applicability. GB guidance can inform understanding without automatically stating NI law. Avoid both extremes: applying every example requirement everywhere, or dismissing process hazards because a specific regime does not apply. Awareness supports a better question, not a legal classification made from a photograph or product label.

Which legal duties and guidance are relevant?

Process safety topics sit across general health and safety law, major accident control, equipment safety, dangerous substances and management-system duties.

Duty or guidanceWhat it requiresHow to apply it
Health and Safety at Work etc. Act 1974Requires employers to protect workers and others so far as reasonably practicable.GB leaders resource and oversee controls that protect workers and others, including high-consequence hazards.
Management of Health and Safety at Work Regulations 1999Requires risk assessment, preventive arrangements, competence, cooperation and review.GB leaders ensure assessment, competent arrangements and review lead to funded corrective decisions.
COMAH Regulations 2015In-scope lower-tier sites need a major accident prevention policy (MAPP) and safety-management arrangements; upper-tier sites also need a safety report.For in-scope GB sites, leaders own lower-tier MAPP and safety-management arrangements; upper-tier sites also maintain a safety report. Review major-accident barrier impairment and closure.
DSEAR 2002Requires dangerous substances and explosive atmosphere risks to be eliminated or controlled.GB leaders ensure dangerous-substance fire/explosion controls are funded, checked and restored when impaired.
PUWER 1998Requires work equipment to be suitable, maintained and used safely.GB leaders resource maintenance and inspection of safety-critical work equipment and act on defects.
Pressure Systems Safety Regulations 2000Requires pressure systems and protective devices to be managed safely.Where GB pressure systems are in scope, leaders maintain examination, protective-device and safe-limit arrangements and act on overdue tests.
Health and Safety at Work (Northern Ireland) Order 1978Apply the general health, safety and welfare duty to this work setting.NI leaders resource and oversee protection of workers and others under the general duty.
Management of Health and Safety at Work Regulations (Northern Ireland) 2000Assess work risks and maintain preventive arrangements appropriate to the actual task.NI leaders ensure assessment, preventive arrangements, competence and review produce action.
Control of Major Accident Hazards Regulations (Northern Ireland) 2015In-scope lower-tier sites need a major accident prevention policy (MAPP) and safety-management arrangements; upper-tier sites also need a safety report.For in-scope NI sites, leaders own lower-tier MAPP/safety-management duties; upper-tier sites additionally prepare a safety report. Require evidence of barrier closure.

Apply GB general duties and COMAH where the establishment is in scope; NI has separate general and COMAH instruments. HSE leadership publications describe management practice, not extra statutes. The operative test is whether leaders resource and verify controls for the actual major-accident hazard.

Source: HSE essential principles of good leadership

Applied case

Fictional exercise: A manager says a GB COMAH example gives every NI workshop identical reporting duties.

Framework

Applicability has defined conditions.

Boundary

The course does not classify the establishment.

Test your decision

How should this be treated?

  1. Establish the actual applicability and jurisdiction through responsible review.
  2. Apply the example automatically.
  3. Ignore all process hazards outside COMAH.
Compare the explanation

Establish the actual applicability and jurisdiction through responsible review.

A specific statutory framework and general process-safety need are distinct.

Open this interactive lesson →

LESSON 12

Connect the leadership handover

Integrate owner, evidence and unresolved conditions.

2D teaching diagram: Change the evidence before restarting
Existing SHAREhub 2D teaching schematic. Use alongside the explanation and fictional case in this lesson.

Connect the leadership handover

A short decision record should identify the reported condition, evidence considered, responsible authority and resulting arrangement. It must not manufacture an approval absent from the facts. Planned work and completed work belong in different categories.

Communicate the current arrangement to people controlling the task. An action list sent only upward can leave the next shift working from an obsolete assumption. State the restriction and the evidence needed for its release, with an owner for the unresolved decision. This makes accountability visible at the point of work.

What do learners commonly misunderstand?

The common mistake is treating responsibility as a list of job titles rather than a system of decision rights and evidence.

A strong answer explains how accountability works during normal, abnormal and emergency conditions. It should include RACI, technical authority, competence, line ownership, escalation and verification.

A weak answer says 'management is responsible and employees must cooperate' without showing how major accident controls are owned.

Learner questionStrong answer should includeWeak answer to avoid
Why is 'everyone is responsible' insufficient?Major accident barriers need named owners and decision rights.It creates shared responsibility.
What is technical authority?A competent function/person that sets standards and approves technical decisions.The senior engineer.
How should contractors be included?Define interfaces, rules, permits, competence and assurance.Give them the site rules.
What is a RACI useful for?Clarifying responsible, accountable, consulted and informed roles.Replacing procedures.
How do you audit accountability?Follow a live scenario/action through roles, decisions and evidence.Check job descriptions.

Applied case

Fictional exercise: A repair is planned and restrictions remain, but the incoming supervisor has not received the update.

Awareness

Receipt by management is not approval.

Feedback

The incoming team needs the current accepted arrangement.

Test your decision

What belongs in handover?

  1. Only “management aware”.
  2. An invented approval to complete the folder.
  3. Current restrictions, responsible decisions, planned work and unresolved release conditions.
Compare the explanation

Current restrictions, responsible decisions, planned work and unresolved release conditions.

Leadership decisions must reach the work they govern.

Open this interactive lesson →