CWF-PRO-RISK · Completed fictional example · Owner role: Health safety and environmental lead
Risk assessment and safe operating limits procedure
Crownway Fuels Ltd. CWF-PRO-RISK. Version 1.0. Prepared 10 November 2026.
COMPLETED FICTIONAL ARRANGEMENT. This Crownway example supports adaptation and learning. It represents no actual company issue, site approval, signature or completed operational evidence.
Explain who does what, in what sequence, the control rationale, evidence, escalation and safe restart conditions.
Scope and responsibility
BULK; HQ; RETAIL. Apply where the site/activity/hazard is present; confirm in the site applicability assessment. Ten English petrol/diesel forecourts and convenience shops, HQ and mobile support. The additional bulk establishment is a separate illustrative scenario. Inventory, regulatory applicability, permissions and site-specific acceptance are unresolved.
| Responsible role | Required action |
| Health safety and environmental lead | Own the arrangement, its current scope and escalation. |
| Site manager and shift supervisor | Verify worksite conditions, coordination, briefing and authorised limits. |
| Engineering and competent specialists | Resolve technical uncertainties, verify protection and retain acceptance evidence. |
| Workers and contractor performing authority | Check the agreed method, report change, stop loss of control and provide safe handback. |
Information before release
Review current site and equipment information, assessments, permissions, competence, contractor interfaces and emergency readiness. The branch records identify the detailed evidence fields. Missing technical values are resolved from competent site information; do not copy values from teaching models.
Preparation and operation
1 Prepare the activity
Define the task, operating modes, exposed people and credible consequences before rating. Include startup, shutdown, breakdowns, maintenance, public interfaces and delayed occupational illness, with worker participation.
2 Carry out and control the work
Select controls through the prevention hierarchy and derive operating limits from accepted technical information. Link organisational risks to task assessments and specialist studies rather than replacing them with a single score.
Control rationale
A generic assessment cannot show that today’s tank, product, people and simultaneous activities are controlled.
Stop escalation and return
Stop for a change in product, plant condition, weather, personnel, work scope or simultaneous activity that invalidates the approved assessment.
The person controlling the activity makes it safe and informs the site manager. The relevant competent specialist verifies the failed or uncertain safeguard. Operations authorises any restart separately after technical acceptance, applicable permissions, work coordination and a fresh briefing. Record all continuing restrictions.
Verification and follow through
Observe work and test evidence for the controls credited in the assessment. Keep the current assessment, proposed improvement and conditional target rating separate. The SHARErisk EV501 organisational priority is a lookup, not severity multiplied by likelihood.
Worked decision
A workshop proposes a lower target likelihood after upgrading containment. No installation or test evidence exists. The HSE lead records the target as conditional, retains the current exposure and failure assumptions and assigns verification before any residual rating is accepted.
This invented case illustrates a decision and any continuing hold. It is not evidence that Crownway has completed an inspection, test, exposure evaluation or regulatory submission.
Connected documents
| Reference | Use in this branch |
| CWF-RA-RISK-01 | Site baseline health safety and environmental assessment (Risk assessment) |
| CWF-RA-RISK-02 | Task specific fuel operations risk assessment (Risk assessment) |
| CWF-RAMS-RISK-01 | Task risk assessment and method statement (RAMS) |
| CWF-CHK-RISK-01 | Pre start and dynamic change check (Checklist) |
| CWF-REG-RISK-01 | Safe operating limits and alarm response register (Register) |
| CWF-FRM-RISK-01 | Operator briefing and understanding record (Form) |
Retain stable record IDs, actual site or asset, template revision, competent author, date and time, findings, actions, owner, due date and evidence. Set the applicable record-specific retention and access rules before operational use. A review date does not authorise deletion; preserve legal holds.
Guidance and related arrangements
Primary guidance 1
Primary guidance 2
Risk Management
Crownway document overview
Primary guidance checked 10 November 2026 for the described arrangements. Linked legal-register entries keep their own review dates and territorial conditions. Guidance, ACOPs, company controls and direct statutory duties are distinct.
Primary references: risk | involvement