Crownway Fuels

SHAREhub · Company management system · v1.0

← All Crownway resources

Lone working violence and security procedure

CWF-PRO-LONE · Completed fictional example · Owner role: Site manager and shift supervisor

Fictional arrangement or blank working master. No actual approval, site authorisation or completed evidence is supplied.

Lone working violence and security procedure

Crownway Fuels Ltd. CWF-PRO-LONE. Version 1.0. Prepared 10 November 2026.

COMPLETED FICTIONAL ARRANGEMENT. This Crownway example supports adaptation and learning. It represents no actual company issue, site approval, signature or completed operational evidence.

Explain who does what, in what sequence, the control rationale, evidence, escalation and safe restart conditions.

Scope and responsibility

RETAIL. Apply where the site/activity/hazard is present; confirm in the site applicability assessment. Ten English petrol/diesel forecourts and convenience shops, HQ and mobile support. The additional bulk establishment is a separate illustrative scenario. Inventory, regulatory applicability, permissions and site-specific acceptance are unresolved.

Responsible roleRequired action
Site manager and shift supervisorOwn the arrangement, its current scope and escalation. Verify worksite conditions, coordination, briefing and authorised limits.
Engineering and competent specialistsResolve technical uncertainties, verify protection and retain acceptance evidence.
Workers and contractor performing authorityCheck the agreed method, report change, stop loss of control and provide safe handback.

Information before release

Review current site and equipment information, assessments, permissions, competence, contractor interfaces and emergency readiness. The branch records identify the detailed evidence fields. Missing technical values are resolved from competent site information; do not copy values from teaching models.

Preparation and operation

1 Prepare the activity

Identify tasks, locations, working hours, public contact and credible emergencies where assistance may be delayed. Decide which activities require paired work or a different operating model.

2 Carry out and control the work

Provide suitable security, access control, communication, check-in and missed-contact escalation with an available responder. Train people to withdraw from aggression without putting themselves at further risk.

Control rationale

Night shifts, robbery and aggressive customers can leave a worker without help while a fuel incident develops.

Stop escalation and return

Stop lone trading or move to an approved safe operating mode if required communications, alarms, protection or response support fails; staff should not pursue offenders.

The person controlling the activity makes it safe and informs the site manager. The relevant competent specialist verifies the failed or uncertain safeguard. Operations authorises any restart separately after technical acceptance, applicable permissions, work coordination and a fresh briefing. Record all continuing restrictions.

Verification and follow through

Test communications and response under the actual night and remote-working conditions. Review violence reports, failed contacts and individual concerns and adjust work before an unreliable arrangement is used.

Worked decision

A mobile engineer cannot obtain a signal at a planned remote task. The supervisor holds lone work and arranges an assessed alternative with dependable contact and assistance. An untested promise to call later is not accepted as cover.

This invented case illustrates a decision and any continuing hold. It is not evidence that Crownway has completed an inspection, test, exposure evaluation or regulatory submission.

Connected documents

ReferenceUse in this branch
CWF-RA-LONE-01Site and shift lone working and violence assessment (Risk assessment)
CWF-PLN-LONE-01Lone worker check in and emergency escalation plan (Plan)
CWF-CHK-LONE-01Security alarm communication and safe area check (Checklist)
CWF-FRM-LONE-01Violence threat and wellbeing support record (Form)

Retain stable record IDs, actual site or asset, template revision, competent author, date and time, findings, actions, owner, due date and evidence. Set the applicable record-specific retention and access rules before operational use. A review date does not authorise deletion; preserve legal holds.

Guidance and related arrangements

Primary guidance 1

Lone Working

Crownway document overview

Primary guidance checked 10 November 2026 for the described arrangements. Linked legal-register entries keep their own review dates and territorial conditions. Guidance, ACOPs, company controls and direct statutory duties are distinct.

Primary references: lone working

Related resources

Primary guidance