Crownway Fuels

SHAREhub · Company management system · v1.0

← All Crownway resources

Contractor competence and fuel site coordination procedure

CWF-PRO-CONT · Completed fictional example · Owner role: Operations director and area manager

Fictional arrangement or blank working master. No actual approval, site authorisation or completed evidence is supplied.

Contractor competence and fuel site coordination procedure

Crownway Fuels Ltd. CWF-PRO-CONT. Version 1.0. Prepared 10 November 2026.

COMPLETED FICTIONAL ARRANGEMENT. This Crownway example supports adaptation and learning. It represents no actual company issue, site approval, signature or completed operational evidence.

Explain who does what, in what sequence, the control rationale, evidence, escalation and safe restart conditions.

Scope and responsibility

BULK; HQ; RETAIL. Apply where the site/activity/hazard is present; confirm in the site applicability assessment. Ten English petrol/diesel forecourts and convenience shops, HQ and mobile support. The additional bulk establishment is a separate illustrative scenario. Inventory, regulatory applicability, permissions and site-specific acceptance are unresolved.

Responsible roleRequired action
Operations director and area managerOwn the arrangement, its current scope and escalation.
Site manager and shift supervisorVerify worksite conditions, coordination, briefing and authorised limits.
Engineering and competent specialistsResolve technical uncertainties, verify protection and retain acceptance evidence.
Workers and contractor performing authorityCheck the agreed method, report change, stop loss of control and provide safe handback.

Information before release

Review current site and equipment information, assessments, permissions, competence, contractor interfaces and emergency readiness. The branch records identify the detailed evidence fields. Missing technical values are resolved from competent site information; do not copy values from teaching models.

Preparation and operation

1 Prepare the activity

Define the contractor scope and interfaces before appointment. Check competence relevant to fuel sites, proposed equipment, supervision, supply chain and emergency arrangements; certificates alone are insufficient.

2 Carry out and control the work

Induct the actual team, share current hazards and site information, agree permits and isolation responsibilities and coordinate customers, deliveries and other contractors. Verify understanding at the worksite.

Control rationale

Specialist contractors can introduce ignition, excavation and isolation risks while the public and other workers remain on site.

Stop escalation and return

Stop contractor work for missing task competence, unsuitable RAMS, uncontrolled interfaces, unsafe behaviour or inability to meet permit and emergency requirements.

The person controlling the activity makes it safe and informs the site manager. The relevant competent specialist verifies the failed or uncertain safeguard. Operations authorises any restart separately after technical acceptance, applicable permissions, work coordination and a fresh briefing. Record all continuing restrictions.

Verification and follow through

The site representative observes critical stages, addresses deviations and checks completion and handback with the performing authority. Retain performance feedback for future selection and review.

Worked decision

A competent electrical contractor sends a replacement operative whose task authorisation is unknown. The site manager holds the affected work and checks capability, briefing and supervision before deciding whether the operative may undertake it.

This invented case illustrates a decision and any continuing hold. It is not evidence that Crownway has completed an inspection, test, exposure evaluation or regulatory submission.

Connected documents

ReferenceUse in this branch
CWF-CHK-CONT-01Contractor capability and specialist competence review (Checklist)
CWF-FRM-CONT-01Contractor site hazard and responsibility exchange (Form)
CWF-CHK-CONT-02Contractor induction and workface readiness check (Checklist)
CWF-FRM-CONT-02Contractor monitoring and intervention record (Form)
CWF-CHK-CONT-03Contractor completion and site handback check (Checklist)

Retain stable record IDs, actual site or asset, template revision, competent author, date and time, findings, actions, owner, due date and evidence. Set the applicable record-specific retention and access rules before operational use. A review date does not authorise deletion; preserve legal holds.

Guidance and related arrangements

Primary guidance 1

How should contractors be managed in process industries?

Crownway document overview

Primary guidance checked 10 November 2026 for the described arrangements. Linked legal-register entries keep their own review dates and territorial conditions. Guidance, ACOPs, company controls and direct statutory duties are distinct.

Primary references: indg368

Related resources

Primary guidance