Crownway Fuels

SHAREhub · Company management system · v1.0

← All Crownway resources

Equipment isolation and lockout schedule

CWF-PLN-ISO-01 · Completed fictional example · Owner role: Engineering and asset integrity manager

Fictional arrangement or blank working master. No actual approval, site authorisation or completed evidence is supplied.

Equipment isolation and lockout schedule

Crownway Fuels Ltd. CWF-PLN-ISO-01. Version 1.0. Prepared 10 November 2026.

COMPLETED FICTIONAL ARRANGEMENT. This Crownway example supports adaptation and learning. It represents no actual company issue, site approval, signature or completed operational evidence.

Provide the site/task-specific equipment isolation and lockout schedule and retain its controlled output.

Purpose scope and accountable roles

BULK; RETAIL. Apply where the site/activity/hazard is present; confirm in the site applicability assessment. Ten English petrol/diesel forecourts and convenience shops, HQ and mobile support. The additional bulk establishment is a separate illustrative scenario. Inventory, regulatory applicability, permissions and site-specific acceptance are unresolved.

Engineering and asset integrity manager owns delivery of this plan. Operations secures staffing and resources; engineering, the HSE lead and relevant competent specialists confirm technical and legal prerequisites. The board resolves constraints affecting critical controls.

Planned arrangements

Engineering and operations identify every energy and material source, possible backfeed, retained inventory, pressure and reaccumulation route. Use the current equipment information and confirm the actual isolation boundary at the plant.

Select, apply, secure and verify an appropriate isolation scheme through competent authorised people. Depressurisation, draining, purging, electrical proving and atmosphere testing are task-specific activities with their own safe methods.

Required planning outputs

Energy/material sources: the owner establishes the actual requirement and retains the evidence, accepted limits and unresolved actions in the linked site or task record. The example supplies no local layout, contact, inventory or technical value.

Isolation points: the owner establishes the actual requirement and retains the evidence, accepted limits and unresolved actions in the linked site or task record. The example supplies no local layout, contact, inventory or technical value.

Locks: the owner establishes the actual requirement and retains the evidence, accepted limits and unresolved actions in the linked site or task record. The example supplies no local layout, contact, inventory or technical value.

Drains/vents: the owner establishes the actual requirement and retains the evidence, accepted limits and unresolved actions in the linked site or task record. The example supplies no local layout, contact, inventory or technical value.

Test method and boundary drawing: the owner establishes the actual requirement and retains the evidence, accepted limits and unresolved actions in the linked site or task record. The example supplies no local layout, contact, inventory or technical value.

Delivery verification and review

Keep isolation certificates and physical status aligned throughout work. Before reinstatement, confirm task completion, personnel clearance, tests, guards, containment and permit handback; remove isolations only through the controlled sequence.

StageExample management arrangement
Before the activityOwner confirms the scope, competent people, current information and permissions. Open critical prerequisites prevent release.
At implementationSite supervisor verifies the physical arrangement and understanding. Engineering checks the accepted technical criteria for the affected equipment.
After change or failureSuspend the affected scope, assess the changed risk, update information and brief people before a new decision.
Planned reviewOwner reviews at a justified risk-based interval. Area management challenges evidence and independent assurance samples effectiveness.

Stop escalation and return

Do not break containment or work on equipment without verified isolation and a safe test; stop for unknown lines, failed proof, leakage past isolation or lost lock control.

The person controlling the activity makes it safe and informs the site manager. The relevant competent specialist verifies the failed or uncertain safeguard. Operations authorises any restart separately after technical acceptance, applicable permissions, work coordination and a fresh briefing. Record all continuing restrictions.

Worked decision

A closed valve is proposed as sufficient protection for breaking a fuel line, but its isolation adequacy and trapped inventory are unproven. The performing authority holds the work. Engineering establishes and verifies a suitable scheme; the example never supplies a valve position or gas limit as work authority.

This invented case illustrates a decision and any continuing hold. It is not evidence that Crownway has completed an inspection, test, exposure evaluation or regulatory submission.

Guidance and related arrangements

Primary guidance 1

Health and Safety Management Systems

Crownway document overview

Primary guidance checked 10 November 2026 for the described arrangements. Linked legal-register entries keep their own review dates and territorial conditions. Guidance, ACOPs, company controls and direct statutory duties are distinct.

Primary references: hsg253

Related resources

Primary guidance