Crownway Fuels

SHAREhub · Company management system · v1.0

← All Crownway resources

Health safety and environmental management policy

CWF-HS-001 · Completed fictional example · Owner role: Managing director and board

Fictional arrangement or blank working master. No actual approval, site authorisation or completed evidence is supplied.

Health safety and environmental management policy

Crownway Fuels Ltd. CWF-HS-001. Version 1.0. Prepared 10 November 2026.

COMPLETED FICTIONAL ARRANGEMENT. This Crownway example supports adaptation and learning. It represents no actual company issue, site approval, signature or completed operational evidence.

Overarching policy with statement of intent, organisation and arrangements. ISO 45001-aligned concepts are used without reproducing the standard or claiming certification.

Company and system scope

BULK; HQ; RETAIL. Apply where the site/activity/hazard is present; confirm in the site applicability assessment. Ten English petrol/diesel forecourts and convenience shops, HQ and mobile support. The additional bulk establishment is a separate illustrative scenario. Inventory, regulatory applicability, permissions and site-specific acceptance are unresolved.

The example workforce is approximately 200 people. The ten forecourts include six roadside or suburban sites and four higher-throughput locations. EV charging is present at some locations. No actual addresses, maximum inventories, permissions, installed safeguards or named dutyholders are established.

Management system purpose

We organise the company so its significant risks are identified, practical controls are resourced and implemented, and their effectiveness is checked. The system follows Plan Do Check Act. It supports occupational health and safety, major-accident prevention where applicable and environmental control, with customer, food and transport interfaces in the defined activity branches.

TierPurpose and example content
Company directionCWF-HS-INTENT, CWF-HS-ORG and CWF-HS-ARR define commitments, roles and implementation.
Activity policy37 completed fictional policy examples use the SHARE 24-section framework.
ImplementationProcedures and plans set preparation, operating, response, evidence and review arrangements.
Working recordsAssessments, forms, checklists, permits and registers provide blank operational masters. The 191 expected record types remain empty.

Leadership consultation and resources

The board sets objectives from the risk profile and provides competent people, engineering, maintenance, emergency readiness and time for worker participation. Operations confirms site staffing and coordination. The HSE lead maintains the legal and risk review; engineering owns asset integrity and technical control. Process-safety and other specialists advise within competence. The document controller maintains current issues and evidence access.

Workers and their representatives contribute to risk assessment, change and review. Include night staff, mobile staff and contractors. Supervisors check practical understanding and report conflicts. A board action log records resources, interim controls and unresolved risks; critical failures are escalated immediately.

Statutory and company arrangements

Determine actual dutyholders and applicability from current law and competent advice. Keep direct legal duties, regulatory grants, ACOPs, regulator guidance, technical standards and company choices distinct. A separate standalone document is not prescribed merely because this catalogue gives it a title. The legal and permissions workbook contains detailed worked and blank records and retains its own review dates.

A petroleum storage certificate concerns qualifying dispensing premises and storage arrangements; it is not an environmental permit or a certificate of overall safety. COMAH applicability needs actual dangerous-substance classifications, maxima and aggregation. The separate illustrative bulk scenario has unresolved inventory and tier. Planning, hazardous-substances consent, environmental permissions and transport roles are separate checks.

Operational control and assurance

Before work, confirm the exact scope, current technical information, competent people, permits, isolations, safeguards, customer boundaries and emergency readiness. Supervisors verify the actual worksite. Technical limits come from the accepted design and specialist assessment; teaching diagrams and example quantities never set them.

Anyone may stop unsafe work. The site manager secures the area and informs the appropriate lead. Engineering or another competent specialist verifies restoration and limitations. Operations authorises restart separately after all relevant technical, regulatory and work-coordination conditions are satisfied. Record and brief the decision.

Assurance levelHow it works
Operational ownershipWorkers and supervisors check the controls they operate and report defects and restrictions.
Management challengeArea management and specialist leads observe representative work and test the reliability of site evidence.
Independent reviewA competent reviewer with adequate independence samples the system, serious risks and repeated findings and reports limitations to the board.

Monitoring and improvement

Use meaningful control-performance measures alongside injuries and incidents. Define the source and denominator of each indicator. Keep overdue tests, bypasses, exposure uncertainties, temporary changes and repeated alarms visible. Assign corrective actions with owners, deadlines and interim controls. Mark implementation separately from effectiveness and reopen failed actions.

Records change and review

Retain permanent IDs, exact site and equipment scope, revisions, competent authors, dated evidence, restrictions, action ownership and separate verification. Establish statutory or permit-specific retention requirements, access and legal holds before live use. Clinical information and personal records have restricted custody; operational records need only the functional information required.

Review equipment, product, staffing, software, layout and operating-model changes before implementation. Resolve permissions and design actions, update information, brief people and verify readiness. Temporary changes have an owner, expiry and restoration plan.

The fictional company cycle uses shift-level critical checks, monthly area-management challenge, quarterly board risk and resource review and an annual system review, plus immediate review after serious failure or material change. These are company example arrangements, not universal statutory intervals. Asset and legal tasks retain their own competent risk-based or prescribed timings.

Local adoption and controlled issue

First establish the real sites, operator, inventory, activities and legal roles. Appoint actual competent owners and deputies. Resolve permission and technical gaps and adapt each relevant branch. Consult the workforce and complete competent technical review. The authorised management then records the actual approved scope, effective date and distribution. Create genuine records and verify implementation before relying on the arrangements.

DecisionActual adoption record
Company and site scope accepted
Competent review and unresolved restrictions
Authorised approval and effective date
Distribution and practical implementation verification

Guidance and related arrangements

Primary guidance 1

Primary guidance 2

Health and Safety Management Systems

Crownway document overview

Primary guidance checked 10 November 2026 for the described arrangements. Linked legal-register entries keep their own review dates and territorial conditions. Guidance, ACOPs, company controls and direct statutory duties are distinct.

Primary references: how to manage | hsg65

Related resources

Primary guidance