Optional presentation practice. Choices and model launches do not write LMS grades, completion or certificates.
Construction teaching and guided site-model practice
An open excavation is a changing work area whose sides, base and nearby loads must remain stable throughout entry, digging, inspection and reinstatement. The approved pre-dig method is the starting condition.
The dig line crosses coloured service indications, but a crew has only an old plan and expects every cable to be at a standard depth.
Identify the workface and who could be exposed. Use the written scenario to establish conditions that the model cannot show.
Buried services should be located by combining records, visual clues, locating devices, competent interpretation and trial holes. See HSE underground cables Cable avoidance tools are useful but not magic.
Planning, locating and safe excavation are complementary controls; uncertainty must be resolved before the tool reaches the service.
The utility drawing and site markings disagree at a proposed connection.
This choice leaves the case unresolved. Planning, locating and safe excavation are complementary controls; uncertainty must be resolved before the tool reaches the service.
Supported answer: Hold excavation at the conflict and reconcile current information, location and safe exposure.
Entry is a fresh workface decision: inspect the actual face and installed support, check services, water, edge loads and access, then record a competent release. Keep people out when any of those controls is uncertain. CAT and Genny are service-locating aids, not proof that the trench is clear.
The model shows a protected section. For the next dig stage, a worker proposes entering beyond that protection while the additional support is still to be installed.
Ground can collapse suddenly and bury or crush a person. A trench box protects only when correctly selected, installed and used within its designed arrangement.
This protects people now. The management and verification stages address safe continuation and prevention of recurrence.
This addresses one part of the observation, but leaves a material exposure or missing control. Read the immediate action and verify the workface conditions.
This would leave people exposed or treat an assumption as evidence. Stop and establish the required controls before continuing.
Supported answer: Keep people out of the unsupported area and establish the competent designed installation sequence from a safe position.
Keep people out of the unsupported area and establish the competent designed installation sequence from a safe position.
A competent person checks the open excavation and its precautions at the start of a working shift and after events that may affect stability, applying the relevant GB or NI rules. The inspection should cover the exposed face, support or batter, water, edges, access, service protection and nearby loads.
BuildOut would close entry when an unexpected wet layer and edge crack appear, obtain competent reassessment, correct the support and water controls, then document a fresh hand-back. BuildOut Ltd is laying a drainage connection beside an occupied building.
Return to the first model scenario: The dig line crosses coloured service indications, but a crew has only an old plan and expects every cable to be at a standard depth.
Documents support assurance, but the check must establish that the intended safeguards are present, effective and maintained.
An absence of accidents is not evidence that a control works. Use the task-specific inspection, test and competent review.
Use this task-specific evidence before accepting the control as effective.
Supported answer: Check the real service route and depth at appropriate points, markings, locator limitations and the authorised method. Unexpected indications or mismatched records trigger a stop and review.
Check the real service route and depth at appropriate points, markings, locator limitations and the authorised method. Unexpected indications or mismatched records trigger a stop and review.
Rain, a route change and a service discrepancy occur together on the fictional Canal Yard project.
This choice leaves the case unresolved. A restart is a coordinated decision based on all relevant conditions, not one repaired symptom.
A restart is a coordinated decision based on all relevant conditions, not one repaired symptom.
Supported answer: Keep entry on hold until competent reviews resolve the interacting changes and the revised controls are verified and briefed.
Use the full course for required learning, activities and the separate assessment. These optional presentation choices do not write course grades or completion.
The PowerPoint contains the presentation and notes. Enable JavaScript for the online choices and classification activity.